HCV INFECTION THROUGH PERFORATING AND CUTTING MATERIAL AMONG CANDIDATES FOR BLOOD DONATION IN BELÉM, BRAZILIAN AMAZON

This study evaluated epidemiological factors for HCV infection associated with sharing perforating and cutting instruments among candidates for blood donation (CBD) in the city of Belém, Pará, Brazilian Amazon. Two definitions of HCV infection cases were used: anti-HCV positivity shown by EIA, and HCV-RNA detection by PCR. Infected and uninfected CBD completed a questionnaire about possible risk factors associated with sharing perforating and cutting instruments. The information was evaluated using simple and multiple logistic regressions. Between May and November 2010, 146 (1.1%) persons with anti-HCV antibodies and 106 (0.8%) with HCV-RNA were detected among 13,772 CBD in Belém. Risk factors associated with HCV infection based on the EIA (model 1) and PCR (model 2) results were: use of needles and syringes sterilized at home; shared use of razors at home, sharing of disposable razors in barbershops, beauty salons etc.; and sharing manicure and pedicure material. The models of HCV infection associated with sharing perforating and cutting instruments should be taken into account by local and regional health authorities and by those of other countries with similar cultural practices, in order to provide useful information to guide political and public strategies to control HCV transmission.

ORIGIN AND PREVALENCE OF HUMAN T-LYMPHOTROPIC VIRUS TYPE 1 (HTLV-1) AND TYPE 2 (HTLV-2) AMONG INDIGENOUS POPULATIONS IN THE AMERICAS

Human T-lymphotropic virus type 1 (HTLV-1) is found in indigenous peoples of the Pacific Islands and the Americas, whereas type 2 (HTLV-2) is widely distributed among the indigenous peoples of the Americas, where it appears to be more prevalent than HTLV-1, and in some tribes of Central Africa. HTLV-2 is considered ancestral in the Americas and is transmitted to the general population and injection drug users from the indigenous population. In the Americas, HTLV-1 has more than one origin, being brought by immigrants in the Paleolithic period through the Bering Strait, through slave trade during the colonial period, and through Japanese immigration from the early 20th century, whereas HTLV-2 was only brought by immigrants through the Bering Strait. The endemicity of HTLV-2 among the indigenous people of Brazil makes the Brazilian Amazon the largest endemic area in the world for its occurrence. A review of HTLV-1 in all Brazilian tribes supports the African origin of HTLV-1 in Brazil. The risk of hyperendemicity in these epidemiologically closed populations and transmission to other populations reinforces the importance of public health interventions for HTLV control, including the recognition of the infection among reportable diseases and events.

Deletions within COL11A1 in Type 2 Stickler Syndrome Detected by Multiplex Ligation - Syndrome Detected by Multiplex Ligation Dependent Probe Amplification (MLPA)

Background: COL11A1 is a large complex gene around 250 kb in length and consisting of 68 exons. Pathogenic mutations in the gene can result in Stickler syndrome, Marshall syndrome or Fibrochondrogenesis. Many of the mutations resulting in either Stickler or Marshall syndrome alter splice sites and result in exon skipping, which because of the exon structure of collagen genes usually leaves the message in-frame. The mutant protein then exerts a dominant negative effect as it co-assembles with other collagen gene products. To date only one large deletion of 40 kb in the COL11A1, which was detected by RT-PCR, has been characterized. However, commonly used screening protocols, utilizing genomic amplification and exon sequencing, are unlikely to detect such large deletions. Consequently the frequency of this type of mutation is unknown. Case presentations: We have used Multiplex Ligation-Dependent Probe Amplification (MLPA) in conjunction with exon amplification and sequencing, to analyze patients with clinical features of Stickler syndrome, and have detected six novel deletions that were not found by exon sequencing alone. Conclusion: Exon deletions appear to represent a significant proportion of type 2 Stickler syndrome. This observation was previously unknown and so diagnostic screening of COL11A1 should include assays capable of detecting both large and small deletions, in addition to exon sequencing.

Aglomeração de cortiça por compressão a quente

A diversificação do uso dos produtos de cortiça exige uma adaptação constante dos processos produtivos utilizados para a transformação deste produto. Este trabalho tem como principal intuito a idealização e investigação de um novo processo de fabrico adaptado a um tipo muito particular de produto, os aglomerados puros de cortiça. Estes, não recorrem a qualquer tipo de aglutinante para assegurar a sua ligação, apenas as resinas contidas na própria cortiça são utilizadas para esse efeito. Analisando os processos de fabrico atuais, verifica-se que, a conceção de geometrias complexas com aglomerados puros de cortiça, só é possível com recurso à maquinação. Este processo gera desperdício e tem uma série de processos que o antecedem, destacando-se a aglomeração prévia numa forma mais simples (bloco paralelepípedo ou cilindro) e o corte numa pré forma. A ideia de se executar uma peça complexa sem recurso à maquinação é o objetivo primordial deste trabalho. Para isso foi construído um molde, com todos os mecanismos auxiliares necessários, à semelhança do que já se faz noutro tipo de indústrias, nomeadamente, do vidro e do plástico. Esse mesmo molde foi submetido a uma série de ensaios para determinação dos parâmetros de enchimento e moldação, tendo-se chegado a uma formulação que garante características atrativas na peça final. A aglutinação do granulado de cortiça revelou-se bastante dependente de três parâmetros: a temperatura aplicada, a humidade do granulado e o grau de compactação aplicado. A industrialização do processo revelou-se também plausível de execução, sendo apenas necessários alguns melhoramentos. A utilização deste tipo de processo revela-se, portanto, atrativa para grandes séries de peças, conseguindo-se elevada reprodutibilidade das mesmas com apenas um processo, sem necessidade de procedimentos adicionais de acabamento.

Estudo da Delaminação em Compósitos de Epóxido Reforçado com Borracha e Fibras Naturais

Nos últimos anos, a utilização dos materiais compósitos tem vindo a tornar-se cada vez mais comum em várias indústrias, onde se verifica uma ascensão na procura pelos mesmos. Características como o baixo peso aliado à sua alta resistência e rigidez permitem que estes materiais possuam diversas aplicações em variadas áreas, desde a medicina, aeronáutica, indústria automóvel e aeroespacial, até à indústria eletrónica. Hoje em dia, o uso de desperdícios sólidos de borracha e fibras naturais na produção de materiais compósitos é, mais que uma opção, uma necessidade ambiental. De forma a reduzir as enormes quantidades de desperdícios, foi criado um material compósito constituído por uma resina termoendurecível reforçada com esses dois tipos de desperdícios. Parâmetros de fabrico como a percentagem de borracha, o tamanho das partículas de borracha, a percentagem de fibras de cana-de-açúcar e o comprimento dessas fibras foram variados, com o objetivo de estudar a influência destes dois materiais nas propriedades mecânicas do compósito. Apesar da maior parte dos compósitos serem fabricados na forma de uma peça funcional quase pronta a ser utilizada, por vezes é necessário recorrer à maquinação de furos. Apesar das muitas técnicas de furação existentes, os defeitos resultantes deste processo aplicado aos materiais compósitos são ainda muito comuns. Desses defeitos o que mais se destaca é sem dúvida a delaminação. Trinta e seis provetes de epóxido reforçado com borracha e fibra de cana-de-açúcar foram fabricados e furados, de modo a possibilitar o estudo das propriedades mecânicas do material compósito, assim como a análise da zona danificada durante a furação. Diferentes condições de furação, como tipos de broca e velocidades de avanço diferentes, foram impostas aos provetes de forma a variar o mais possível a zona de dano de uns furos para os outros. Parâmetros como a área de dano ou ainda o fator de delaminação provam ser muito úteis na caracterização e quantificação do dano na zona periférica de um furo. Recorrendo a técnicas de processamento de imagem foi possível obter esses parâmetros. O processamento e análise de imagem pode ser feito através de vários métodos. O método utilizado neste trabalho foi o software MATLAB® associado a ferramentas de processamento de imagem. Depois de feita a análise dos furos foram realizados ensaios de esmagamento a todos os provetes. Este passo permitiu assim avaliar de que forma os parâmetros de furação influenciam a resistência mecânica do material, e se a avaliação realizada aos furos é um método viável para a avaliação da extensão de dano nesses furos.

Projeto mecânico de equipamento para fabrico automatizado de vestuário

O fabrico de vestuário é uma atividade que se desenvolve em Portugal há várias décadas. Existem marcas de vestuário com reconhecimento a nível mundial que são de origem portuguesa. Para se conseguir qualidade é necessário inovar e automatizar determinados processos, de forma a aumentar produtividades e reduzir erros devido à mão de obra de tarefas intensivas. Na empresa Portuguesa Henrique Camões, com uma vasta experiência ligada a equipamentos de fabrico têxtil, nasceu a ideia de projetar um protótipo de um equipamento automatizado para o fabrico de colarinhos e punhos, com a finalidade de verificar a sua viabilidade a nível funcional. Este trabalho teve assim por base a necessidade de efetuar um projeto sobre um equipamento capaz de costurar e cortar colarinhos e punhos, a serem aplicados em peças de vestuário. Inicialmente foi efetuado um estudo prévio de levantamento de equipamentos já existentes para fins semelhantes. Foi então necessário idealizar um equipamento capaz de responder às expectativas e exigências por parte do cliente. Após os esboços iniciais, onde foram definidos os tipos de mecanismos e formas de funcionamento dos diferentes sistemas em função dos movimentos e ações pretendidas e a estrutura do equipamento, estes sistemas foram otimizados por forma a se obter como resultado final um equipamento funcional. Foi também projetado o esquema pneumático e Grafcet de funcionamento do equipamento. Como auxiliares do projeto, apresentam-se a lista de componentes e de processos de fabrico, bem como os desenhos de pormenor de todos os componentes integrantes da estrutura. O resultado final é um conjunto de ideias e soluções possíveis de aplicar num equipamento deste tipo. De facto, a solução proposta é uma possibilidade viável para um equipamento automatizado para costura e corte de colarinhos e punhos.

Type-based protocol conformance and aliasing control in concurrent java programs

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Evolution of the Human Immunodeficiency Virus Type 2 Envelope in the First Years of Infection is Associated with the Dynamics of the Neutralizing Antibody Response

Background: Differently from HIV-1, HIV-2 disease progression usually takes decades without antiretroviral therapy and the majority of HIV-2 infected individuals survive as elite controllers with normal CD4+ T cell counts and low or undetectable plasma viral load. Neutralizing antibodies (Nabs) are thought to play a central role in HIV-2 evolution and pathogenesis. However, the dynamic of the Nab response and resulting HIV-2 escape during acute infection and their impact in HIV-2 evolution and disease progression remain largely unknown. Our objective was to characterize the Nab response and the molecular and phenotypic evolution of HIV-2 in association with Nab escape in the first years of infection in two children infected at birth. Results: CD4+ T cells decreased from about 50% to below 30% in both children in the first five years of infection and the infecting R5 viruses were replaced by X4 viruses within the same period. With antiretroviral therapy, viral load in child 1 decreased to undetectable levels and CD4+ T cells recovered to normal levels, which have been sustained at least until the age of 12. In contrast, viral load increased in child 2 and she progressed to AIDS and death at age 9. Beginning in the first year of life, child 1 raised high titers of antibodies that neutralized primary R5 isolates more effectively than X4 isolates, both autologous and heterologous. Child 2 raised a weak X4-specific Nab response that decreased sharply as disease progressed. Rate of evolution, nucleotide and amino acid diversity, and positive selection, were significantly higher in the envelope of child 1 compared to child 2. Rates of R5-to-X4 tropism switch, of V1 and V3 sequence diversification, and of convergence of V3 to a β-hairpin structure were related with rate of escape from the neutralizing antibodies. Conclusion: Our data suggests that the molecular and phenotypic evolution of the human immunodeficiency virus type 2 envelope are related with the dynamics of the neutralizing antibody response providing further support for a model in which Nabs play an important role in HIV-2 pathogenesis.

Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.

This document presents particular description of work done during student’s internship in PR Metal company realized as ERASMUS PROJECT at ISEP. All information including company’s description and its structure, overview of the problems and analyzed cases, all stages of projects from concept to conclusion can be found here. Description of work done during the internship is divided here into two pieces. First part concerns one activities of the company which is robotic chefs (kitchen robot) production line. Work, that was done for development of this line involved several tasks, among them: creating a single-worker montage station for screwing robots housing’s parts, improve security system for laser welding chamber, what particularly consists in designing automatically closing door system with special surface, that protects against destructive action of laser beam, test station for examination of durability of heating connectors, solving problem with rotors vibrations. Second part tells about main task, realized in second half of internship and stands a complete description of machine development and design. The machine is a part of car handle latch cable production line and its tasks are: cutting cable to required length and hot-forming plastic cover for further assembly needs.

Artefacts induced on c-type haem proteins by electrode surfaces

J Biol Inorg Chem (2011) 16:209–215 DOI 10.1007/s00775-010-0717-z

Kinetics studies of the superoxide-mediated electron transfer reactions between rubredoxin-type proteins and superoxide reductases

J Biol Inorg Chem (2006) 11: 433–444 DOI 10.1007/s00775-006-0090-0

Vascular Malformation and Common Keratinocytic Nevus of the Soft Type: Phacomatosis Pigmentovascularis Revisited

Phacomatosis pigmentovascularis is a rare syndrome characterized by the coexistence of a pigmented nevus and a cutaneous vascular malformation. We report a 5-year-old boy with all the typical findings of phacomatosis pigmentovascularis type Ia. Although its existence according to the traditional classification has been questioned, this case represents a very rare association of a capillary vascular malformation and a common keratinocytic nevus of the soft type.

Empirical models for quantification of machining damage in composite materials

Dissertação para obtenção do Grau de Doutor em Engenharia Mecânica

Two Novel CMY-2-Type β-Lactamases Encountered in Clinical Escherichia Coli Isolates

BACKGROUND: Chromosomally encoded AmpC β-lactamases may be acquired by transmissible plasmids which consequently can disseminate into bacteria lacking or poorly expressing a chromosomal bla AmpC gene. Nowadays, these plasmid-mediated AmpC β-lactamases are found in different bacterial species, namely Enterobacteriaceae, which typically do not express these types of β-lactamase such as Klebsiella spp. or Escherichia coli. This study was performed to characterize two E. coli isolates collected in two different Portuguese hospitals, both carrying a novel CMY-2-type β-lactamase-encoding gene. FINDINGS: Both isolates, INSRA1169 and INSRA3413, and their respective transformants, were non-susceptible to amoxicillin, amoxicillin plus clavulanic acid, cephalothin, cefoxitin, ceftazidime and cefotaxime, but susceptible to cefepime and imipenem, and presented evidence of synergy between cloxacilin and cefoxitin and/or ceftazidime. The genetic characterization of both isolates revealed the presence of bla CMY-46 and bla CMY-50 genes, respectively, and the following three resistance-encoding regions: a Citrobacter freundii chromosome-type structure encompassing a blc-sugE-bla CMY-2-type -ampR platform; a sul1-type class 1 integron with two antibiotic resistance gene cassettes (dfrA1 and aadA1); and a truncated mercury resistance operon. CONCLUSIONS: This study describes two new bla CMY-2-type genes in E. coli isolates, located within a C. freundii-derived fragment, which may suggest their mobilization through mobile genetic elements. The presence of the three different resistance regions in these isolates, with diverse genetic determinants of resistance and mobile elements, may further contribute to the emergence and spread of these genes, both at a chromosomal or/and plasmid level.

Gain-of-Function Mutations in IFIH1 Cause a Spectrum of Human Disease Phenotypes Associated with Upregulated Type I Interferon Signaling

The type I interferon system is integral to human antiviral immunity. However, inappropriate stimulation or defective negative regulation of this system can lead to inflammatory disease. We sought to determine the molecular basis of genetically uncharacterized cases of the type I interferonopathy Aicardi-Goutières syndrome, and of other patients with undefined neurological and immunological phenotypes also demonstrating an upregulated type I interferon response. We found that heterozygous mutations in the cytosolic double-stranded RNA receptor gene IFIH1 (MDA5) cause a spectrum of neuro-immunological features consistently associated with an enhanced interferon state. Cellular and biochemical assays indicate that these mutations confer a gain-of-function - so that mutant IFIH1 binds RNA more avidly, leading to increased baseline and ligand-induced interferon signaling. Our results demonstrate that aberrant sensing of nucleic acids can cause immune upregulation.