In Vitro Photodynamic Inactivation of Cryptococcus neoformans Melanized Cells with Chloroaluminum Phthalocyanine Nanoemulsion

The selection of fungi resistant to currently used fungicides and the emergence of new pathogenic species make the development of alternative fungus-control techniques highly desirable. Photodynamic antimicrobial chemotherapy (PACT) is a promising method which combines a nontoxic photosensitizer (PS) with visible light to cause selective killing of microbial cells. The development of PACT to treat mycoses or kill fungi in the environment depends on identifying effective PS for the different pathogenic species and delivery systems able to expand and optimize their use. In the present study, the in vitro susceptibility of Cryptococcus neoformans melanized cells to the photodynamic effects of the PS agent ClAlPc in nanoemulsion (ClAlPc/NE) was examined. Cells were killed in a PS concentration- and light dose-dependent manner. Treatment with ClAlPc/NE, using PS concentrations (e.g. 4.5 mu m) and light doses (e.g. 10 J cm-2) compatible with PACT, resulted in a reduction of up to 6 logs in survival. Washing the cells to remove unbound PS before light exposure did not inhibit fungal photodynamic inactivation. Internalization of ClAlPc by C.neoformans was confirmed by confocal fluorescence microscopy, and the degree of uptake was dependent on PS concentration.

Induction of cellulase and hemicellulase activities of Thermoascus aurantiacus by xylan hydrolyzed products

Thermoascus aurantiacus is able to secrete most of the hemicellulolytic and cellulolytic enzymes. To establish the xylanase inducers of T. aurantiacus, the mycelia were first grown on glucose up until the end of the exponential growth phase, followed by washing and re-suspension in a basal medium without a carbon source. Pre-weighed amounts of xylose (final concentration of 3.5 mg/ml), xylobiose (7 mg/ml) and hydrolyzed xylan from sugarcane bagasse (HXSB) which contained xylose, xylobiose and xylotriose (6.8 mg/ml) were evaluated as inducers of xylanase. It was observed that xylose did not suppress enzyme induction of T. aurantiacus when used in low concentrations, regardless of whether it was inoculated with xylobiose. Xylobiose promoted fast enzyme production stopping after 10 h, even at a low consumption rate of the carbon source; therefore xylobiose appears to be the natural inducer of xylanase. In HXSB only a negligible xylanase activity was determined. Xylose present in HXSB was consumed within the first 10 h while xylobiose was partially hydrolyzed at a slow rate. The profile of alpha-arabinofuranosidase induction was very similar in media induced with xylobiose or HXSB, but induction with xylose showed some positive effects as well. The production profile for the xylanase was accompanied by low levels of cellulolytic activity. In comparison, growth in HXSB resulted in different profiles of both xylanase and cellulase production, excluding the possibility of xylanase acting as endoglucanases.

Mass balance of pilot-scale pretreatment of sugarcane bagasse by steam explosion followed by alkaline delignification

Five pilot-scale steam explosion pretreatments of sugarcane bagasse followed by alkaline delignification were explored. The solubilised lignin was precipitated with 98% sulphuric acid. Most of the pentosan (82.6%), and the acetyl group fractions were solubilised during pretreatment, while 90.2% of cellulose and 87.0% lignin were recovered in the solid fraction. Approximately 91% of the lignin and 72.5% of the pentosans contained in the steam-exploded solids were solubilised by delignification, resulting in a pulp with almost 90% of cellulose. The acidification of the black liquors allowed recovery of 48.3% of the lignin contained in the raw material. Around 14% of lignin, 22% of cellulose and 26% of pentosans were lost during the process. In order to increase material recovery, major changes, such as introduction of efficient condensers and the reduction in the number of washing steps, should be done in the process setup. (C) 2012 Elsevier Ltd. All rights reserved.

Epidemiological, parasitological and molecular aspects of Giardia duodenalis infection in children attending public daycare centers in southeastern Brazil

The purpose of this study was to determine the prevalence, associated risk factors and genotype of Giardia duodenalis infection in children attending public daycare centers in the city of Araguari, state of Minas Gerais, Brazil. Fecal samples were collected from 245 children aged 0-5 years, and questionnaires were asked about sociodemographic and hygiene-related characteristics. At the daycare centers where children tested positive, fecal samples were collected from the staff handling food, and from family members and domestic animals. Positive samples were analyzed at the dehydrogenase glutamate (gdh) locus to determine the genotype. The prevalence of G. duodenalis was 51.8%, and drinking unfiltered and unboiled water (OR 2.12, CI 1.26-3.69, p<0.001) and washing hands only with water (OR 2.14, Cl 1.19-4.04, p<0.001) were related risk factors. No association was found between test-positive children anti their family members, domestic animals and food handlers. An analysis of the sequences of 30 samples revealed that they all belonged to genotype B. (C) 2012 Royal Society of Tropical Medicine and Hygiene. Published by Elsevier Ltd. All rights reserved.

Minori rumeni tra percorsi migratori e rappresentazioni. Nè soli, nè accompagnati a Bologna

The thesis deals with the heterogenous category of the “unaccompanied minors”, concentrating the scientific work on those who migrate from Romania to the Italian city of Bologna. Between different migratory routes that include Romanian minors, I chose to explore the ones linked with the underground and illegal contexts. In order to analyse the reasons and the morphology of their migratory career, I used the multisituated field research which allowed me to consider the social policies in both the Romanian and the Italian environment. The main debate on the situation of the “unaccompanied children” refers to the extent to which these minors leave their country of origin “accompanied” by different adult figures and it also involves the role played by these adults. The first chapter is dedicated to a brief theoretical and methodological introduction to the main arguments of the thesis such as Romanian migration to Italy, trafficking in human beings, transnationality of migrant’s migration and decentered cooperation as a means of contrasting illegal migration and trafficking. Each field of research is characterized by a specific methodological approach, but they are all linked by the anthropological perspective I adopted throughout the entire work. The Romanian context, analized from a diachronic and a synchronic perspective represents the object of the second chapter. Some aspects of the Regime policies and other characteristics of the Romanian poscomunist period of “transition” are useful frameworks that become a background of the migration flows outside the country. The third chapter focuses on the Romanian patterns of migration. The reconstruction of some past attitudes that Romanians adopted towards migration are relevant in order to reveal the continuity with the present migratory practices. A consistent part is dedicated to a concrete example based on a field research in Bologna on a group of Romanian roma migrating from the south of Romania. The contact with these persons opened a debate on the limits between legal and illegal migration practices among the Romanians. The conclusion is that minors’ migration to Italy follows the adult patterns and flows. The nucleus of the field researches is included in the fourth and the fifth chapter. Before presenting the settings and the itineraries of the field researches, some deconstructive reflections are made on the representations that common sense and social sciences create on concepts as “child”, “minor” and “childhood”. A first perspective on the Romanian migrant minors emerges from a research concentrated on a group of roma teenagers engaged in Bologna in activities like windscreen washing, pocket-picking, begging and street prostitution. The aim of the research was to gain access to their daily life, to observe their relationship with the adults who “accompany” them and the strategies they activate in order to take some material profit out of their migratory experience. A parallel field research focuses on the Romanian minors who are part of the roma group coming from the south of Romania. Most of them are reunited with their family in Bologna, but according to the Italian law, they are all living as illegal migrants. Others are only temporary sheltered by these families and they meanwhile dedicate to illegal survviving practices. An interesting point of my participant observation was to reveal the motivations that these minors give when asked about the refusal to start a legal career inside the local Centres dedicated to the “non accompanied minors”. Their autoreflexivity brings some light on the controversy regarding the adequacy of the local and national care system and the migratory projects the minors have. In this respect, a small part of the research is dedicated to the phenomena of minors’ street prostitution in Bologna, as a useful contribution to the fragmented vision researchers have on the “unaccompanied” or “separated” children. The last chapter focuses on a decentered cooperation project that emerged as an alternative response the local administration from Bologna had chosen for facing the presence of numerous migrants coming from the south of Romania. The group of Romanian roma who was also the object of my field research became the starting point for the cooperation proposals between the city of Bologna and the city of Craiova. Although there are three projects involving the two administrations, throughout a period of stage in the Romanian city of Craiova I chose to analyse, only the one dedicated to the “urgent measures” requested in order to contrast the illegal migration and the trafficking in minors. This final part of the thesis highlightens the possible contribution that such a project might bring to the study of a complex and in some parts contradictory phenomena as that of the “unaccompanied” migrant minors.

Caratterizzazione di membrane da nanofiltrazione

Nanofiltration (NF) is a pressure-driven membrane process, intermediate between reverse osmosis and ultrafiltration. Commercially available polymeric membranes have been used in a wide range of applications, such as drinking, process industry and waste water treatment. For all the applications requiring high stability and harsh washing procedures inorganic membranes are preferred due to their high chemical inertia. Typically, γ – Al2O3 as well as TiO2 and ZrO2 selective layers are used; the latter show higher chemical stability in a wide range of pH and temperatures. In this work the experimental characterization of two different type of membrane has been performed in order to investigate permeation properties, separation performance and efficiency with aqueous solutions containing strong inorganic electrolytes. The influence of salt concentration and feed pH as well as the role of concentration polarization and electrolyte type on the membrane behavior are investigated. Experimentation was performed testing a multi–layer structured NF membrane in α-Al2O3, TiO2 and ZrO2, and a polymeric membrane, in polyamide supported on polysulfone, with binary aqueous solutions containing NaCl, Na2SO4 or CaCl2; the effect of salt composition and pH in the feed side was studied both on flux and salt rejection. All the NF experimental data available for the two membranes were used to evaluate the volumetric membrane charge (X) corresponding to each operative conditions investigated, through the Donnan Steric Pore Model and Dielectric Exclusion (DSPM&DE). The results obtained allow to understand which are the main phenomena at the basis of the different behaviors observed.

Studio Sperimentale e Modellazione della Separazione di Proteine con Membrane di Affinità

Chromatography represents one of the most important and widely used unit operation in the biotechnology industry. However this technique suffers from several limitations such as high pressure drop, slow mass transfer through the diffusive pores and strong dependence of the binding capacity on flow rate. In this work, affinity membranes with improved capacity have been considered as an alternative technology for the capturing step in antibody manufacturing. Several affinity membranes have been prepared starting from various membrane supports. Different affinity ligands have been utilized like Protein A, the natural ligand of choice for antibodies, as well as synthetic ligands that exhibit affinity for the Fc portion of antibodies. The membranes have been characterized in detail: binding and elution performance was evaluated in adsorption experiments using pure IgG solutions, while membrane selectivity was evaluated using complex solutions like a cell culture supernatant. The most promising affinity membranes were extensively tested in dynamic experiments. The effects of operating parameters like feed concentration and flow rate on separation performances like binding capacity, selectivity and process yield have been studied in detail in order to find the optimal conditions for binding and elution steps. The membranes have been used over several complete chromatographic cycles to evaluate the effects of ageing and of membrane regeneration on dynamic binding capacity. A novel mathematical model is proposed that can describe all the chromatographic steps involved in the membrane affinity chromatography process for protein purification. The mathematical description is based on the species continuity equation coupled with a proper binding kinetic equation, and suitable to describe adequately the dispersion phenomena occurring both in the micro-porous membranes as well as in the extra-column devices used in the system. The model considers specifically all the different chromatographic steps, namely adsorption, washing and elution. The few relevant fitting parameters of the model were derived from a calibration with the experimental affinity cycles performed with pure IgG solutions, then the model is used to describe experimental data obtained in chromatographic cycles carried out with complex feeds as the cell culture supernatant. Simulations reveal a good agreement with experimental data in all the chromatography steps, both in the case of pure IgG solutions and for the cell culture supernatant considered.

Studio della mobilità ambientale di contaminanti inorganici su fanghi da dragaggio

La gestione di fanghi da dragaggio richiede una buona conoscenza della natura degli inquinanti da cui essi sono contaminati. Questo studio si è posto l’obiettivo di individuare una strategia di caratterizzazione applicata a sedimenti dragati nel Porto di Ravenna. Particolare attenzione è stata rivolta allo studio della mobilità degli inquinanti inorganici (metalli pesanti), sia sul materiale tal quale che sui residui ottenuti dopo trattamento di soil washing, operazione prevista al fine di separare sabbie a basso carico di contaminanti dalla frazione sitosa-argillosa dove si ha la maggior concentrazione di contaminanti. Lo studio sulla mobilità è stato eseguito avvalendosi di opportuni test di rilascio, valutando gli effetti di diversi parametri, quali pH, tempo di dilavamento, rapporto solido-liquido. In conclusione, dai risultati della caratterizzazione chimica si è potuto valutare l’efficienza del Soil Washing sui sedimenti trattati: efficienza elevata per le componenti organiche, meno vistosa la decontaminazione dei metalli sulle sabbie per valori bassi di contaminazione. I sedimenti e le sabbie non presentano livelli di contaminazione preoccupanti, cosa che li renderebbe idonei al riuso secondo le modalità previste. Il metallo la cui lisciviazione dipende maggiormente dal pH è lo Zn, il Cu è il metallo più influenzato dalla complessazione con la sostanza organica, l’As è l’unico metallo ad avere massima lisciviazione a pH basico. Dopo trattamento Soil Washing tutti i metalli ad esclusione di Cu e del Fe aumentano la loro mobilità nella frazione fina rispetto al sedimento tal quale.

Nuove sonde fluorescenti per lo studio e la quantificazione del magnesio totale intracellulare

Sebbene il magnesio sia essenziale per la maggior parte dei processi biologici, si conosce ancora poco sulla sua distribuzione e compartimentalizzazione intracellulare, soprattutto a causa dell’inadeguatezza delle tecniche attualmente disponibili. Per questo motivo, particolare interesse ha recentemente suscitato una famiglia di molecole fluorescenti, diaza-18-crown-6 8-idrossichinoline (DCHQ1 e suoi derivati), che mostrano un’alta specificità e affinità per il magnesio (superiore a quella delle sonde commerciali), che consente di mappare il magnesio totale intracellulare. L’approccio sintetico alle molecole DCHQ è stato ottimizzato mediante riscaldamento alle microonde: con questa nuova metodica è stato possibile sintetizzare una famiglia di derivati con caratteristiche di fluorescenza, uptake, ritenzione e localizzazione intracellulare potenziate rispetto alla capostipite DCHQ1. Il derivato acetometossi estere (DCHQ3), idrolizzato dalle esterasi cellulari, ha mostrato un miglior uptake e ritenzione intracellulare; le lunghe catene laterali alchiliche della sonda DCHQ4, invece, hanno conferito a questo derivato maggiore lipofilicità e, di conseguenza, maggiore affinità per le membrane; con l’inserimento di gruppi laterali aromatici, infine, si sono ottenute due sonde (DCHQ5 e DCHQ6) molto fluorescenti e altamente ritenute all’interno delle cellule anche dopo i lavaggi. Il derivato fenilico DCHQ5 si è dimostrato, inoltre, utilizzabile anche per saggi fluorimetrici quantitativi del magnesio totale in campioni cellulari molto piccoli; in più, grazie all’alta ritenzione cellulare, è stato usato per monitorare e quantificare l’efflusso di magnesio attraverso la membrana plasmatica in risposta a stimolazione con cAMP. I risultati presentati in questa tesi mostrano che i DCHQ-derivati potranno rappresentare in futuro uno strumento versatile per lo studio della distribuzione e dell’omeostasi del magnesio cellulare. In particolare la sonda DCHQ5 ha mostrato l’ulteriore peculiarità di essere eccitabile sia nell’UV che nel visibile, e potrebbe essere quindi utilizzata con successo in un’ampia varietà di misure di fluorescenza, fornendo un contributo importante per la comprensione del ruolo di questo importante elemento.

Urban water demand model: the case study of Emilia Romagna (Italy)

Water is the driving force in nature. We use water for washing cars, doing laundry, cooking, taking a shower, but also to generate energy and electricity. Therefore water is a necessary product in our daily lives (USGS. Howard Perlman, 2013). The model that we created is based on the urban water demand computer model from the Pacific Institute (California). With this model we will forecast the future urban water use of Emilia Romagna up to the year of 2030. We will analyze the urban water demand in Emilia Romagna that includes the 9 provinces: Bologna, Ferrara, Forli-Cesena, Modena, Parma, Piacenza, Ravenna, Reggio Emilia and Rimini. The term urban water refers to the water used in cities and suburbs and in homes in the rural areas. This will include the residential, commercial, institutional and the industrial use. In this research, we will cover the water saving technologies that can help to save water for daily use. We will project what influence these technologies have to the urban water demand, and what it can mean for future urban water demands. The ongoing climate change can reduce the snowpack, and extreme floods or droughts in Italy. The changing climate and development patterns are expected to have a significant impact on water demand in the future. We will do this by conducting different scenario analyses, by combining different population projections, climate influence and water saving technologies. In addition, we will also conduct a sensitivity analyses. The several analyses will show us how future urban water demand is likely respond to changes in water conservation technologies, population, climate, water price and consumption. I hope the research can contribute to the insight of the reader’s thoughts and opinion.

Validation of a new method to assess the long-term Hypothalamic-Pituitary-Adrenal Activity using hair glucocorticoids as biomarkers. - Studies on pigs and laboratory Sprague-Dawley Rats

The evaluation of chronic activity of the hypothalamic-pituitary-adrenal (HPA) axis is critical for determining the impact of chronic stressful situations. The potential use of hair glucocorticoids as a non-invasive, retrospective, biomarker of long term HPA activity is of great interest, and it is gaining acceptance in humans and animals. However, there are still no studies in literature examining hair cortisol concentration in pigs and corticosterone concentration in laboratory rodents. Therefore, we developed and validated, for the first time, a method for measuring hair glucocorticoids concentration in commercial sows and in Sprague-Dawley rats. Our preliminary data demonstrated: 1) a validated and specific washing protocol and extraction assay method with a good sensitivity in both species; 2) the effect of the reproductive phase, housing conditions and seasonality on hair cortisol concentration in sows; 3) similar hair corticosterone concentration in male and female rats; 4) elevated hair corticosterone concentration in response to chronic stress manipulations and chronic ACTH administration, demonstrating that hair provides a good direct index of HPA activity over long periods than other indirect parameters, such adrenal or thymus weight. From these results we believe that this new non-invasive tool needs to be applied to better characterize the overall impact in livestock animals and in laboratory rodents of chronic stressful situations that negatively affect animals welfare. Nevertheless, further studies are needed to improve this methodology and maybe to develop animal models for chronic stress of high interest and translational value in human medicine.

Valutazione della mobilita' di contaminanti inorganici tramite test di cessione su matrici ambientali contaminate

La caratterizzazione di sedimenti contaminati è un problema complesso, in questo lavoro ci si è occupati di individuare una metodologia di caratterizzazione che tenesse conto sia delle caratteristiche della contaminazione, con analisi volte a determinare il contenuto totale di contaminanti, sia della mobilità degli inquinanti stessi. Una adeguata strategia di caratterizzazione può essere applicata per la valutazione di trattamenti di bonifica, a questo scopo si è valutato il trattamento di soil washing, andando ad indagare le caratteristiche dei sedimenti dragati e del materiale in uscita dal processo, sabbie e frazione fine, andando inoltre a confrontare le caratteristiche della sabbia in uscita con quelle delle sabbie comunemente usate per diverse applicazioni. Si è ritenuto necessario indagare la compatibilità dal punto di vista chimico, granulometrico e morfologico. Per indagare la mobilità si è scelto di applicare i test di cessione definiti sia a livello internazionale che italiano (UNI) e quindi si sono sviluppate le tecnologie necessarie alla effettuazione di test di cessione in modo efficace, automatizzando la gestione del test a pHstat UNI CEN 14997. Questo si è reso necessario a causa della difficoltà di gestire il test manualmente, per via delle tempistiche difficilmente attuabili da parte di un operatore. Le condizioni redox influenzano la mobilità degli inquinanti, in particolare l’invecchiamento all’aria di sedimenti anossici provoca variazioni sensibili nello stato d’ossidazione di alcune componenti, incrementandone la mobilità, si tratta quindi di un aspetto da considerare quando si individuano le adeguate condizioni di stoccaggio-smaltimento, si è eseguita a questo scopo una campagna sperimentale.

Selective oxidation of 5-hydroxymethylfurfural using monometallic and bimetallic supported nanoparticles

This work deals with the oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) using metal supported catalysts. Catalysts were prepared from the immobilisation of preformed monometallic (Au, Pd) and bimetallic (AuCu, AuPd) nanoparticles on commercial oxides (TiO2, CeO2). Au-TiO2 catalyst was found to be very active for HMF oxidation; however, this system deactivated very fast. For this reason, we prepared bimetallic gold-copper nanoparticles and an increase in the catalytic activity was observed together with an increase in catalyst stability. In order to optimise the interaction of the metal active phase with the support, Au and AuCu nanoparticles were supported onto CeO2. Au-CeO2 catalyst was found to be more active than the bimetallic one, leading to the conclusion that in this case the most important feature is the interaction between gold and the support. Catalyst pre-treatments (calcination and washing) were carried out to maximise the contact between the metal and the oxide and an increase in the FDCA production could be observed. The presence of ceria defective sites was crucial for FDCA formation. Mesoporous cerium oxide was synthesised with the hard template method and was used as support for Au nanoparticles to promote the catalytic activity. In order to study the role of active phase in HMF oxidation, PdAu nanoparticles were supported onto TiO2. Au and Pd monometallic catalysts were very active in the formation of HMFCA (5-hydroxymethyl-2-furan carboxylic acid), but Pd was not able to convert it, leading to a low FDCA yield. The calcination of PdAu catalysts led to Pd segregation on the particles surface, which changed the reaction pathway and included an important contribution of the Cannizzaro reaction. PVP protected PdAu nanoparticles, synthesised with different morphologies (core-shell and alloyed structure), confirmed the presence of a different reaction mechanism when the metal surface composition changes.

Safety by design: production of engineering surface modified nanomaterials

This PhD thesis focused on nanomaterial (NM) engineering for occupational health and safety, in the frame of the EU project “Safe Nano Worker Exposure Scenarios (SANOWORK)”. Following a safety by design approach, surface engineering (surface coating, purification process, colloidal force control, wet milling, film coating deposition and granulation) were proposed as risk remediation strategies (RRS) to decrease toxicity and emission potential of NMs within real processing lines. In the first case investigated, the PlasmaChem ZrO2 manufacturing, the colloidal force control applied to the washing of synthesis rector, allowed to reduce ZrO2 contamination in wastewater, performing an efficient recycling procedure of ZrO2 recovered. Furthermore, ZrO2 NM was investigated in the ceramic process owned by CNR-ISTEC and GEA-Niro; the spray drying and freeze drying techniques were employed decreasing NM emissivity, but maintaining a reactive surface in dried NM. Considering the handling operation of nanofibers (NFs) obtained through Elmarco electrospinning procedure, the film coating deposition was applied on polyamide non-woven to avoid free fiber release. For TiO2 NF the wet milling was applied to reduce and homogenize the aspect ratio, leading to a significant mitigation of fiber toxicity. In the Colorobbia spray coating line, Ag and TiO2 nanosols, employed to transfer respectively antibacterial or depolluting properties to different substrates, were investigated. Ag was subjected to surface coating and purification, decreasing NM toxicity. TiO2 was modified by surface coating, spray drying and blending with colloidal SiO2, improving its technological performance. In the extrusion of polymeric matrix charged with carbon nanotube (CNTs) owned by Leitat, the CNTs used as filler were granulated by spray drying and freeze spray drying techniques, allowing to reduce their exposure potential. Engineered NMs tested by biologists were further investigated in relevant biological conditions, to improve the knowledge of structure/toxicity mechanisms and obtain new insights for the design of safest NMs.

Investigation of P3HT PCBM particle-based solar cells

Die Herstellung von Polymer-Solarzellen aus wässriger Phase stellt eine attraktive Alternative zu der konventionellen lösemittelbasierten Formulierung dar. Die Vorteile der aus wässriger Lösung hergestellten Solarzellen liegen besonders in dem umweltschonenden Herstellungsprozess und in der Möglichkeit, druckbare optoelektronische Bauteile zu generieren. Die Prozessierbarkeit von hydrophoben Halbleitern im wässrigen Milieu wird durch die Dispergierung der Materialien, in Form von Nanopartikeln, erreicht. Der Transfer der Halbleiter in eine Dispersion erfolgt über die Lösemittelverdampfungsmethode. Die Idee der Verwendung von partikelbasierte Solarzellen wurde bereits umgesetzt, allerdings blieben eine genaue Charakterisierung der Partikel sowie ein umfassendes Verständnis des gesamten Fabrikationsvorgangs aus. Deshalb besteht das Ziel dieser Arbeit darin, einen detaillierten Einblick in den Herstellungsprozess von partikelbasierten Solarzellen zu erlangen, mögliche Schwächen aufzudecken, diese zu beseitigen, um so zukünftige Anwendungen zu verbessern. Zur Herstellung von Solarzellen aus wässrigen Dispersionen wurde Poly(3-hexylthiophen-2,5-diyl)/[6,6]-Phenyl-C61-Buttersäure-Methylester (P3HT/PCBM) als Donor/Akzeptor-System verwendet. Die Kernpunkte der Untersuchungen richteten sich zum einen die auf Partikelmorphologie und zum anderen auf die Generierung einer geeigneten Partikelschicht. Beide Parameter haben Auswirkungen auf die Solarzelleneffizienz. Die Morphologie wurde sowohl spektroskopisch über Photolumineszenz-Messungen, als auch visuell mittels Elektronenmikroskopie ermittelt. Auf diese Weise konnte die Partikelmorphologie vollständig aufgeklärt werden, wobei Parallelen zu der Struktur von lösemittelbasierten Solarzellen gefunden wurden. Zudem wurde eine Abhängigkeit der Morphologie von der Präparationstemperatur beobachtet, was eine einfache Steuerung der Partikelstruktur ermöglicht. Im Zuge der Partikelschichtausbildung wurden direkte sowie grenzflächenvermittelnde Beschichtungsmethoden herangezogen. Von diesen Techniken hatte sich aber nur die Rotationsbeschichtung als brauchbare Methode erwiesen, Partikel aus der Dispersion in einen homogenen Film zu überführen. Des Weiteren stand die Aufarbeitung der Partikelschicht durch Ethanol-Waschung und thermische Behandlung im Fokus dieser Arbeit. Beide Maßnahmen wirkten sich positiv auf die Effizienz der Solarzellen aus und trugen entscheidend zu einer Verbesserung der Zellen bei. Insgesamt liefern die gewonnen Erkenntnisse einen detaillierten Überblick über die Herausforderungen, welche bei dem Einsatz von wasserbasierten Dispersionen auftreten. Die Anforderungen partikelbasierter Solarzellen konnten offengelegt werden, dadurch gelang die Herstellung einer Solarzelle mit einer Effizienz von 0.53%. Dieses Ergebnis stellt jedoch noch nicht das Optimum dar und lässt noch Möglichkeiten für Verbesserungen offen.