Folding of a Donor-Containing Ionene by Intercalation with an Acceptor

Cationic ionenes that bear electron-rich 1,5-dialkoxynaphthalene (DAN) units within the alkylene segment were allowed to interact with different types of electron-deficient, acceptor-containing molecules in an effort to realize intercalation-induced folding of the ionenes; the collapse of the chains was expected to occur in such a way that the donor and acceptor units become arranged in an alternating fashion. Several acceptor-bearing molecules were prepared by the derivatization of pyromellitic dianhydride and naphthalene tetracarboxylic dianhydride with two different oligoethylene glycol monomethyl ether monoamines. This yielded acceptor molecules with different water solubility and allowed the examination of solvophobic effects in the folding process. UV/Vis spectroscopic studies were carried out by using a 1:1 mixture of the DAN-ionenes and different acceptor molecules in water/DMSO solvent mixtures. The intensity of the charge-transfer (CT) band was seen to increase with the water content in the solvent mixture, thereby suggesting that the intercalation is indeed aided by solvophobic effects. The naphthalene diimide (NDI) bearing acceptor molecules consistently formed significantly stronger CT complexes when compared to the pyromellitic diimide (PDI) bearing acceptor molecules, which is a reflection of the stronger pi-stacking tendency of the former. AFM studies of drop-cast films of different ionene-acceptor combinations revealed that compact folded structures are formed most effectively under conditions in which the strongest CT complex is formed.

A Passive Hopper With Lossless Collisions

A passive vertical hopping robot is here highly idealised as two vertically arranged masses acted on by gravity and coupled by a linear spring. The lower mass makes dead (e = 0) collisions with the rigid ground. The equations of motion can be reduced to a one dimensional map. Fixed points of the map are found in which case the robot hops incessantly. For these conservative solutions the lower mass collides with the ground with zero impact velocity. The interval of attraction for these conservative fixed points depends on system parameters.

Interaction of guar gum with hydrophobic solids

The interaction of guar gum with the hydrophobic solids namely talc, mica and graphite has been investigated through adsorption, electrokinetic and flotation experiments. The adsorption densities of guar gum onto the above hydrophobic minerals show that they are more or less independent of pH. The adsorption isotherms of guar gum onto talc, mica and graphite indicate that the adsorption densities increase with increase in guar gum concentration and all the isotherms follow the as L1 type according to Giles classification. The magnitude of the adsorption density of guar gum onto the above minerals may be arranged in the following sequence: talc > graphite > mica The effect of particle size on the adsorption density of guar gum onto these minerals has indicated that higher adsorption takes place in the coarser size fraction, consequent to an increase in the surface face-to-edge ratio. In the case of the talc and mica samples pretreated with EDTA and the leached graphite sample, a decrease in the adsorption density of guar gum is observed, due to a reduction in the metallic adsorption sites. The adsorption densities of guar gum increase with decrease in sample weight for all the three minerals. Electrokinetic measurements have indicated that the isoelectric points (iep) of these minerals lie between pH 2-3, Addition of guar gum decreases the negative electrophoretic mobility values in proportion to the guar gum concentration without any observable shift in the iep values, resembling the influence of an indifferent electrolyte. The flotation recovery is diminished in the presence of guar gum for all the three minerals, The magnitude of depression follows the same sequence as observed in the adsorption studies. The floatability of EDTA treated talc and mica samples as well as the leached graphite sample is enhanced, complementing the adsorption data, Possible mechanisms of interaction between the hydrophobic minerals and guar gum are discussed.

Metallic Nanoparticles Arranged in a Helical Geometry: Route Towards Strong and Broadband Chiro-optical Response

Recent advances in nanotechnology have paved ways to various techniques for designing and fabricating novel nanostructures incorporating noble metal nanoparticles, for a wide range of applications. The interaction of light with metal nanoparticles (NPs) can generate strongly localized electromagnetic fields (Localized Surface Plasmon Resonance, LSPR) at certain wavelengths of the incident beam. In assemblies or structures where the nanoparticles are placed in close proximity, the plasmons of individual metallic NPs can be strongly coupled to each other via Coulomb interactions. By arranging the metallic NPs in a chiral (e.g. helical) geometry, it is possible to induce collective excitations, which lead to differential optical response of the structures to right-and left circularly polarized light (e.g. Circular Dichroism - CD). Earlier reports in this field include novel techniques of synthesizing metallic nanoparticles on biological helical templates made from DNA, proteins etc. In the present work, we have developed new ways of fabricating chiral complexes made of metallic NPs, which demonstrate a very strong chiro-optical response in the visible region of the electromagnetic spectrum. Using DDA (Discrete Dipole Approximation) simulations, we theoretically studied the conditions responsible for large and broadband chiro-optical response. This system may be used for various applications, for example those related to polarization control of visible light, sensing of proteins and other chiral bio-molecules, and many more.

Description of sampling stations, methods of benthic sampling and biological water quality assessment; with some consideration of the influence of sample variation on the assessment values obtained

The first bilateral study of methods of biological sampling and biological methods of water quality assessment took place during June 1977 on selected sampling sites in the catchment of the River Trent (UK). The study was arranged in accordance with the protocol established by the joint working group responsible for the Anglo-Soviet Environmental Agreement. The main purpose of the bilateral study in Nottingham was for some of the methods of sampling and biological assessment used by UK biologists to be demonstrated to their Soviet counterparts and for the Soviet biologists to have the opportunity to test these methods at first hand in order to judge the potential of any of these methods for use within the Soviet Union. This paper is concerned with the nine river stations in the Trent catchment.

Subwavelength imaging with two symmetrical interfaces by dielectric-tube photonic crystals

As distinct from coated photonic crystals, in this paper we propose a novel one that is made of dielectric tubes arranged in a close-packet square lattice. Without metallic cores, this structure is low-loss and convenient to fabricate. A left-handed frequency region is found in the second band by dispersion characteristic analysis. Without inactive modes for the transverse electric mode, negative refraction and subwavelength imaging are demonstrated by the finite-difference time-domain simulations with two symmetrical interfaces, i.e. Gamma X and Gamma M.

Cidadania e autoestima com crianças e jovens da Orquestra de Violinos do Centro Cultural Cartola

Esta pesquisa parte da relação música/projeto social para estudar de que forma os integrantes da Orquestra de Violinos Cartola-Petrobras, do Centro Cultural Cartola, no Rio de Janeiro, tiveram reforçada a autoestima pelo aprendizado de uma nova linguagem a musical e pelo convívio com os professores e com os demais companheiros músicos. Nesse percurso, foram analisadas as dificuldades de se morar em uma favela carioca, dentre elas o preconceito, seja do ponto de vista geográfico, seja do ponto de vista social, uma vez que a maioria dos componentes da Orquestra mora na Mangueira. O ponto de partida foi a leitura de teóricos como Axel Honneth, George Yúdice, Stuart Hall e a contribuição de outros estudiosos da área sociocultural, que comparecem para dar suporte à argumentação. Num segundo momento, foi desenvolvido o trabalho de campo, com o recolhimento dos dados colhidos em entrevistas com os atores sociais. O binômio reconhecimento social/solidariedade implica outro elemento aqui também abordado: o desenvolvimento da cidadania. Diante de tal cenário, é possível observar a possibilidade de imprimirem-se mudanças no contexto onde a realidade se configura, ou seja, qual o lugar que o sujeito ocupa antes e depois de ser instaurado o processo de apropriação do conhecimento e como as mudanças que se operam nele se estendem ao ambiente em derredor, incluindo a família.

Produção literária: tecer o imaginário, espaço preenchido da margem

O objetivo deste estudo é analisar como a prática da produção literária interfere, positivamente, na trajetória de indivíduos que se encontram em situação de vulnerabilidade social. A investigação deu-se no Centro Cultural Cartola, situado na comunidade da Mangueira na cidade do Rio de Janeiro, espaço que favorece a experiência individual e social de crianças e jovens por meio de ferramentas pedagógico-culturais: dança, orquestra de violinos, música, capoeira, judô, balé, oficinas literárias de leituras e de composições de texto, que possibilitam a criação de valores culturais da comunidade e dos indivíduos pelo processo de identificação. A oficina Produção Literária: Tecer o Imaginário teve início em maio de 2011, com propostas de estímulo à criação e à leitura de textos ficcionais, possibilitando que a narrativa como um vetor de (re)construção do sujeito e do coletivo, sob o ponto de vista ético e estético. A fase investigativa constou de oficinas de literatura apresentadas de duas formas: Leitura e escrita em grupos pequenos - ou individuais. O trabalho de campo da nossa pesquisa qualitativo-participativa requereu que fizéssemos um recorte espacial de nossa experiência, para que à partir dai pudéssemos inserir o recorte teórico que fosse factível ao nosso objeto de investigação. Importava a dinâmica da ação dos atores sociais. A pesquisa, estruturada sobre a ação, revelou-se detentora de inúmeras possibilidades onde o imaginário se apresenta. A interação por meio de falas que estimulam a imaginação e a reflexão exerce influência no grupo e no indivíduo na construção de si e de seu mundo. Como o objetivo da pesquisa não se adequava somente à prática oral, de contar e ouvir estórias, mas de estimular os atores à inventar e escrevê-las percebemos que este modo prevaleceu. Por exigência de que a criança dominasse de alguma forma essa modalidade, sobretudo porque o ato de escrever validava as histórias inventadas por elas e as dispostas por outras pessoas nos livros. Visto que oralidade pode dispersar a entrada da criança em seu mundo imaginário, tendo importância maior para crianças muito pequenas que não entraram ainda no mundo da linguagem. A maneira que conduzíamos a pesquisa era sempre no sentido de estimular o imaginário, capturando-o, e a partir disso inseri-lo no mundo da linguagem, da simbolização. Para Minayo (1992), O método é o próprio processo do desenvolvimento das coisas.... Nesse sentido, surgia, daquela prática, um texto/sujeito, cujas palavras eram um tronco donde se espalhavam uma infinidade de ideias criativas. O resultado da investigação constatou que a criação ficcional, estimula e desenvolve o imaginário e as representações simbólicas empobrecidas. Evidenciando o quanto é gratificante e prazeroso para crianças e jovens suas participações em atividade que fazem do campo educativo e terapêutico um campo de aventura. Observar o efeito reparador da literatura no individuo, e de consolo nos momentos de lutos e de crises de toda ordem foi evidente em situação fronteiriça, pelo uso do mundo interno dessa potente ferramenta psicopedagogica como fortalecimento psicoemocional

A modular planar robotic manipulandum with end-point torque control.

Robotic manipulanda are extensively used in investigation of the motor control of human arm movements. They permit the application of translational forces to the arm based on its state and can be used to probe issues ranging from mechanisms of neural control to biomechanics. However, most current designs are optimized for studying either motor learning or stiffness. Even fewer include end-point torque control which is important for the simulation of objects and the study of tool use. Here we describe a modular, general purpose, two-dimensional planar manipulandum (vBOT) primarily optimized for dynamic learning paradigms. It employs a carbon fibre arm arranged as a parallelogram which is driven by motors via timing pulleys. The design minimizes the intrinsic dynamics of the manipulandum without active compensation. A novel variant of the design (WristBOT) can apply torques at the handle using an add-on cable drive mechanism. In a second variant (StiffBOT) a more rigid arm can be substituted and zero backlash belts can be used, making the StiffBOT more suitable for the study of stiffness. The three variants can be used with custom built display rigs, mounting, and air tables. We investigated the performance of the vBOT and its variants in terms of effective end-point mass, viscosity and stiffness. Finally we present an object manipulation task using the WristBOT. This demonstrates that subjects can perceive the orientation of the principal axis of an object based on haptic feedback arising from its rotational dynamics.

Production and economic return in pangasiid catfish (Pangasius hypophthalmus) monoculture and polyculture with silver carp (Hypophthalmichthys molitrix) in farmers' ponds

The production of fish and net economic return in pangasiid catfish (Pangasius hypophthalmus) monoculture and polyculture with silver carp (Hypophthalmichthys molitrix) in farmers' ponds were assessed. The experiment was arranged in three treatments each with three replications. The ponds were stocked with 30,000 fishes per hectare. In treatment 1 (T1) pangasiid catfish only, in treatment 2 (T2) pangasiid catfish and silver carp at the ratio of 1:1, and in treatment 3 (T3) pangasiid catfish and silver carp at the ratio of 2:1 were stocked. At harvest, production of fish was found significantly (p<0.05) different among the treatments, highest in T1 and lowest in T2. Though the total biomass production and total economic return was significantly highest in T1 than in T2 and T3, the net economic return was lowest because of the required highest input costs especially for supplemental feed and fingerlings, resulted the highest cost per unit yield (CPY in Tk/kg) in T1. Highest cost for supplemental feed required in T1 was due to highest quantity of feed required for the highest number of pangasiid catfish stocked in that treatment. The findings of the present study suggest that though monoculture of pangasiid catfish give higher fish biomass production but polyculture with silver carp is environmentally good and economically profitable.

Fabrication and Characterization of High Power InGaN Blue-Violet Lasers with an Array Structure

InGaN/GaN multi-quantum-well-structure laser diodes with an array structure are successfully fabricated on sapphire substrates. The laser diode consists of four emitter stripes which share common electrodes on one laser chip. An 800-mu m-long cavity is formed by cleaving the substrate along the < 1 (1) over bar 00 >. orientation using laser scriber. The threshold current and voltage of the laser array diode are 2A and 10.5 V, respectively. A light output peak power of 12W under pulsed current injection at room temperature is achieved. We simulate the electric properties of GaN based laser diode in a co-planar structure and the results show that minimizing the difference of distances between the different ridges and the n-electrode and increasing the electrical conductivity of the n-type GaN are two effective ways to improve the uniformity of carrier distribution in emitter stripes. Two pairs of emitters on a chip are arranged to be located near the two n-electrode pads on the left and right sides, and the four stripe emitters can laser together. The laser diode shows two sharp peaks of light output at 408 and 409 nm above the threshold current. The full widths at half maximum for the parallel and perpendicular far field patterns are 8 degrees and 32 degrees, respectively.

Fabrication of Iron Oxide Core/Gold Shell Submicrometer Spheres with Nanoscale Surface Roughness for Efficient Surface-Enhanced Raman Scattering

A method to synthesize Fe3O4 core/Au shell submicrometer structures with very rough surfaces on the nanoscale is reported. The Fe3O4 particles were first modified with uniform polymers through the layer-by-layer technique and then adsorbed a lot of gold nanoseeds for further Au shell formation. The shell was composed of a large number of irregular nanoscale An particles arranged randomly, and there were well-defined boundaries between these Au nanoparticles. The Fe3O4 core/Au shell particles showed strong plasmon resonance absorption in the near-infrared range, and can be separated quickly from solution by an external magnet.

Formation of Two Kinds of Hexagonally Arranged Structures in ABC Triblock Copolymer Thin Films Induced by a Strongly Selective Solvent Vapor

An order-order transition (OOT) in the sequence of a hexagonally arranged core-shell cylinder to a double-hexagonally arranged dot in polystyrene-block-poly(butadiene)-block-poly(2-vinylpyridine) (SBV) triblock copolymer thin films is reported to be induced upon exposure to a solvent vapor that: is strongly selective for the two end blocks. These two kinds of hexagonally arranged structures could form when the film thickness is 44, 3.23, and 223 nm. When the film thickness is decreased to 13 nm, the ordered structure is absent. The sizes of the cylinder structures formed with the same annealing time in films of different thickness are compared to address the effects of film thickness on the phase structure. The mechanism is analyzed from the total surface area of the blocks and the effective interaction parameter in the solvent vapor.

Ring-banded spherulite surface structure of poly(epsilon-caprolactone) in its miscible mixtures with poly(styrene-co-acrylonitrile)

The surface structure of the ring-banded spherulites in polymer blends PCL/SAN (90/10) was studied by optical microscopy, SEM, and TEM, respectively. It is interesting to find that the surface structure of the ring-banded spherulites in polymer blends PCL/SAN (90/10) is made up of the convex bands. The landscape of the convex bands on the surface has been little emphasized before. Radial fibrils are arranged on the bands. Details of the radial fibrils on the bands can be observed by TEM. The landscape of the convex bands on the surface and twisting of lamellae in the convex bands for PCL/SAN blends may be useful to explain the formation mechanism of the ring banded spherulites in polymer blends or even in homopolymers. (C) 1999 John Wiley & Sons, Inc.