Nonlinear I-V characteristics of nanocrystalline SnO2

Current versus voltage characteristics (I-V) of nanocrystalline SnO2 materials have been investigated in air at room temperature. The samples were prepared by the inert gas condensation technique (IGCT) as well as by chemical methods. X-ray diffraction studies showed a tetragonal rutile structure for all the samples. Microstructural studies were performed with transmission electron microscopy. All the samples exhibited nonlinear I-V characteristics of the current-controlled negative resistance (CCNR) type. The results show that the threshold field (break down) voltage is higher for the samples prepared by the IGCT method than for those prepared by the chemical method due to the formation of a tin oxide layer over the crystalline tin. It is also found that the threshold field increases with the decrease in grain size.

Improved prediction of plane transverse jets in supersonic crossflows

THE flowfield due to transverse injection of a round sonic jet into a supersonic flowis a configuration of interest in the design of supersonic combustors or thrust vector control of supersonic jets. The flow is also of fundamental interest because it presents separation from a smooth surface, embedded subsonic regions, curved shear layers, strong shocks, an unusual development of the injected jet into a kidney-shaped streamwise vortex pair, and a wake behind the jet. Although the geometry is simple, the flow is complex and is a good candidate for assessing the behavior of turbulence models for high-speed flow, beginning with the corresponding two-dimensional flow shown in Fig. 1. At the slot, an underexpanded sonic jet expands rapidly into the supersonic crossflow. Expansion waves reflect at the jet boundary, coalesce, and give rise to a Mach surface (Mach disk for round jets).

A simple low-cost electrical switching analyzer for I-V characterization of switching samples and devices

The phenomena of nonlinear I-V behavior and electrical switching find extensive applications in power control, information storage, oscillators, etc. The study of I-V characteristics and switching parameters is necessary for the proper application of switching materials and devices. In the present work, a simple low-cost electrical switching analyzer has been developed for the measurement of the electrical characteristics of switching materials and devices. The system developed consists of a microcontroller-based excitation source and a high-speed data acquisition system. The design details of the excitation source, its interface with the high-speed data acquisition system and personal computer, and the details of the application software developed for automated measurements are described. Typical I-V characteristics and switching curves obtained with the system developed are also presented to illustrate the capability of the instrument developed.

Crystal structure and conformation study of N-methyl-t-3-methyl-r-2, c-6-diphenylpiperidin-4-one thiosemicarbazone

Thiosemicarbazones are having the ability to bind with metal and inhibit the enzyme ribonucleoside diphosphate reductase(RDR),an enzyme which is involved in the synthesis of DNA precursors in the mammalian cells.The title compound N-methyl-t-3-methyl-r-2, c-6-diphenylpiperidin-4-one thiosemicarbazone (NMMDPT), CCDC 218052, was prepared using Mannich reaction and characterized by X-ray diffraction methods.The crystal data are:C20H24N4S; M.W= 352.49, triclinic,space group P (1) over bar, a = 8.467(2)angstrom, b = 10.228(2)angstrom, c = 12.249(2)angstrom; lpha=92.595(3)degrees, beta=104.173(3)degrees, gamma=13.628(3)degrees; V=930.0(3)angstrom(3), Z=2, D-cal=1.259Mgm(-3),mu=0.184mm(-1),lambda (MoKalpha)=0.71073 angstrom, final R1 and wR2 are 0.0470 and 0.1052, respectively. The piperidine rings adopt chair conformation. The planar phenyl rings are oriented equatorially at 2,6-positions of the piperidine ring. The molecular packing can be viewed as dimers held together by two N-H...S types of intermolecular hydrogen bonds. Weak C-H...pi interactions also support the stability of the molecules in the crystal in addition to van der Waals forces. (c) 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Diesel Engine Driven Stand-Alone Variable Speed Constant Frequency Slip Ring Induction Generator - Theory and Experimental Results

The operation of a stand-alone, as opposed to grid connected generation system, using a slip-ring induction machine as the electrical generator, is considered. In contrast to an alternator, a slip-ring induction machine can run at variable speed and still deliver constant frequency power to loads. This feature enables optimization of the system when the prime mover is inherently variable speed in nature eg. wind turbines, as well as diesel driven systems, where there is scope for economizing on fuel consumption. Experimental results from a system driven by a 44 bhp diesel engine are presented. Operation at subsynchronous as well as super-synchronous speeds is examined. The measurement facilitates the understanding of the system as well as its design.

DTC Technique for Induction Machine based Integrated Starter-Generator of an Automobile

This paper mainly concentrates on the application of the direct torque control (DTC) technique for the induction machine based integrated startergenerator (ISG) for automobile applications. It also discusses in brief about the higher DC bus voltage requirements in the automobiles i.e. present 14V system vs. 42V system to meet the power requirements, modes of operation of ISG, electric machine and the drive selection for the ISG,description of DTC technique, simulation and experimental results, and implementation.

Direct stability evaluation of power systems with detailed generator models using structure-preserving energy functions

Energy-based direct methods for transient stability analysis are potentially useful both as offline tools for planning purposes as well as for online security assessment. In this paper, a novel structure-preserving energy function (SPEF) is developed using the philosophy of structure-preserving model for the system and detailed generator model including flux decay, transient saliency, automatic voltage regulator (AVR), exciter and damper winding. A simpler and yet general expression for the SPEF is also derived which can simplify the computation of the energy function. The system equations and the energy function are derived using the centre-of-inertia (COI) formulation and the system loads are modelled as arbitrary functions of the respective bus voltages. Application of the proposed SPEF to transient stability evaluation of power systems is illustrated with numerical examples.

An X-ray and neutron diffraction study of cation substituted TlSr2CuO5

The structures of TlSr(2−x)LaxCuO(5+δ), with x=0.5, 0.75 and 1, and Tl.5Pb0.5Sr2CuO(5+δ) have been examined with X-ray and neutron powder Rietveld refinement. They are isostructural (P4/mmm) with the corresponding thallium-barium cuprate having one Cu-O layer with Cu3+ ions in octahedral coordination with oxygen (structure type 1201). The influence of cation substitution and disorder on the structure and superconducting properties of these phases have been investigated. La3+ substitution for Sr2+ stabilises the structure and reduces Cu3+, permitting superconductivity, while Pb2+ substitution for Tl3+ only stabilises the structure, without reducing Cu3+.

Factor V Leiden as risk factor for pregnancy complications : Epidemiological study of Finnish women

Factor V Leiden (FV Leiden) is the most common inherited thrombophilia in Caucasians increasing the risk for venous thrombosis. Its prevalence in Finland is 2-3%. FV Leiden has also been associated with several pregnancy complications. However, the importance of FV Leiden as their risk factor is unclear. The aim of the study was to assess FV Leiden as a risk factor for pregnancy complications in which prothrombotic mechanisms may play a part. Specifically, the study aimed to assess the magnitude of the risk, if any, associated with FV Leiden for pregnancy-associated venous thrombosis, pre-eclampsia, unexplained stillbirth, and preterm birth. The study was conducted as a nested case-control study within a fixed cohort of 100,000 consecutive pregnant women in Finland. The study was approved by the ethics committee of the Finnish Red Cross Blood Service and by the Ministry of Social Affairs and Health. All participants gave written informed consent. Cases and controls were identified by using national registers. The diagnoses of the 100,000 women identified from the National Register of Blood Group and Blood Group Antibodies of Pregnant Women were obtained from the National Hospital Discharge Register. Participants gave blood samples for DNA tests and filled in questionnaires. The medical records of the participants were reviewed in 49 maternity hospitals in Finland. Genotyping was performed in the Finnish Genome Center. When evaluating pregnancy-associated venous thrombosis (34 cases, 641 controls), FV Leiden was associated with 11-fold risk (OR 11.6, 95% CI 3.6-33.6). When only analyzing women with first venous thrombosis, the risk was 6-fold (OR 5.8, 95% CI 1.6-21.8). The risk was increased by common risk factors, the risk being highest in women with FV Leiden and pre-pregnancy BMI over 30 kg/m2 (75-fold), and in women with FV Leiden and age over 35 years (60-fold). When evaluating pre-eclampsia (248 cases, 679 controls), FV Leiden was associated with a trend of increased risk (OR 1.7, 95% CI 0.8-3.9), but the association was not statistically significant. When evaluating unexplained stillbirth (44 cases, 776 controls), FV Leiden was associated with over 3-fold risk (OR 3.8, 95% CI 1.2-11.6). When evaluating preterm birth (324 cases, 752 controls), FV Leiden was associated with over 2-fold risk (OR 2.4, 95% CI 1.3-4.6). FV Leiden was especially associated with late preterm birth (32-36 weeks of gestation), but not with early preterm birth (< 32 weeks of gestation). The results of this large population-based study can be generalized to Finnish women with pregnancies continuing beyond first trimester, and may be applied to Caucasian women in populations with similar prevalence of FV Leiden and high standard prenatal care.

Crystal Chemistry of the Noncentrosymmetric Eulytites: A(3)Bi(XO4)(3) (X = V, A = Pb; X = P, A = Ca, Cd, Sr, Pb)

Eulytite compounds, A(3)Bi(XO4)(3) (X = P, A = Ca, Cd, Sr, Pb), belong to the noncentrosymmetric space group l (4) over bar 3d (No. 220) as determined by single-crystal X-ray diffraction studies. The crystals were grown from the melt-cool technique with considerable difficulty as the compounds melt incongruently at their melting temperature, except for the compound Pb3Bi(PO4)(3). The unit cell parameter a is 9.984(5), 9.8611(3), 10.2035(3), and 10.3722(2) angstrom for Ca3Bi(PO4)(3), Cd3Bi(PO4)(3), Sr3Bi(PO4)(3), and Pb3Bi(PO4)(3) respectively, and there are four formula units in the unit cell. The structure of Pb3Bi(VO4)(3), a unique eulytite with vanadium substitution, is compared with all these phosphorus substituted eulytites. The A(2+) and Bi3+ cations occupy the special position (16c) while the O anions occupy the general Wyckoff position (48e) in the crystal structure. Only one O position has been identified for Pb3Bi(PO4)(3) and Pb3Bi(VO4)(3), whereas two O atom sites were identified for Ca3Bi(PO4)(3), Cd3Bi(PO4)(3), and Sr3Bi(PO4)(3). The UV-vis diffuse reflectance spectra indicate large band gaps for all the phosphate eulytites while a lower band gap is observed for the vanadate eulytite. The feasibility of the use of these compounds in optoelectronic devices has been tested by measuring the second-harmonic generation (SHG) values which have been found to be of a magnitude equivalent to the commercially used KDP (KH2PO4).

Structural Studies of Analgesics and Their Interactions. V.* The Crystal and Molecular Structure of Metamizol Monohydrate

Metamizol, Na[Ct3H16N3045], C13H16N304S-Na +, a sulphonyl derivative of amidopyrine, is perhaps the most widely used non-narcotic analgetic and antiinflammatory pyrazolone derivative. The monohydrate of the compound crystallizes in the monoclinic space group P2Jc with eight molecules in a unit cell of dimensions a = 9.143 (3), b = 49.50 (2), c = 7.314 (2)/k and fl = 90.9 (1) °. The structure was solved by direct methods and refined to an R value of 0.080 for 4466 observed reflections. The two crystallographically independent molecules in the structure have similar dimensions. The elongated molecules are hydrophobic at one end and hydrophilic at the other with the middle portion partly hydrophobic and partly hydrophilic. The pyrazolone group in the structure has dimensions similar to those found in uncomplexed antipyrine and amidopyrine. The crystal structure can be described as consisting of double layers of metamizol molecules stacked perpendicular to the b axis. The adjacent double layers are separated by a layer of Naions and water molecules.

Reactivity Of Pph3 Toward Ruiiruiiicl(O2car)4 - Syntheses, Molecular-Structures, And Spectroscopic And Electrochemical Properties Of Ruiiruiii(Oh2)Cl(Mecn)(O2car)4(Pph3)2 And Ruii2(Oh2)(Mecn)2(O2car)4(Pph3)2

By the reaction of Ru2Cl(O2CAr)4 (1) and PPh3 in MeCN-H2O the diruthenium(II,III) and diruthenium(II) compounds of the type Ru2(OH2)Cl(MeCN)(O2CAr)4(PPh3)2 (2) and Ru2(OH2)(MeCN)2(O2CAr)4(PPh3)2 (3) were prepared and characterized by analytical, spectral, and electrochemical data (Ar is an aryl group, C6H4-p-X; X = H, OMe, Me, Cl, NO2). The molecular structure of Ru2(OH2)Cl(MeCN)(O2CC6H4-p-OMe)4(PPh3)2 was determined by X-ray crystallography. Crystal data are as follows: triclinic, P1BAR, a = 13.538 (5) angstrom, b = 15.650 (4) angstrom, c = 18.287 (7) angstrom, alpha = 101.39 (3)-degrees, beta = 105.99 (4)-degrees, gamma = 97.94 (3)-degrees, V = 3574 angstrom 3, Z = 2. The molecule is asymmetric, and the two ruthenium centers are clearly distinguishable. The Ru(III)-Ru(II), Ru(III)-(mu-OH2), and Ru(II)-(mu-OH2) distances and the Ru-(mu-OH2)-Ru angle in [{Ru(III)Cl(eta-1-O2CC6H4-p-OMe)(PPh3)}(mu-OH2)(mu-O2CC6H4-p-OMe)2{Ru(II)(MeCN)(eta-1-O2CC6H4-p-OMe)(PPh3)}] are 3.604 (1), 2.127 (8), and 2.141 (10) angstrom and 115.2 (5)-degrees, respectively. The compounds are paramagnetic and exhibit axial EPR spectra in the polycrystalline form. An intervalence transfer (IT) transition is observed in the range 900-960 nm in chloroform in these class II type trapped mixed-valence species 2. Compound 2 displays metal-centered one-electron reduction and oxidation processes near -0.4 and +0.6 V (vs SCE), respectively in CH2Cl2-TBAP. Compound 2 is unstable in solution phase and disproportionates to (mu-aquo)diruthenium(II) and (mu-oxo)diruthenium(III) complexes. The mechanistic aspects of the core conversion are discussed. The molecular structure of a diruthenium(II) compound, Ru2(OH2)(MeCN)2(O2CC6H4-p-NO2)4(PPh3)2.1.5CH2Cl2, was obtained by X-ray crystallography. The compound crystallizes in the space group P2(1)/c with a = 23.472 (6) angstrom, b = 14.303 (3) angstrom, c = 23.256 (7) angstrom, beta = 101.69 (2)-degrees, V = 7645 angstrom 3, and Z = 4. The Ru(II)-Ru(II) and two Ru(II)-(mu-OH2) distances and the Ru(II)-(mu-OH2)-Ru(II) angle in [{(PPh3)-(MeCN)(eta-1-O2CC6H4-p-NO2)Ru}2(mu-OH2)(mu-O2CC6H4-p-NO2)2] are 3.712 (1), 2.173 (9), and 2.162 (9) angstrom and 117.8 (4)-degrees, respectively. In both diruthenium(II,III) and diruthenium(II) compounds, each metal center has three facial ligands of varying pi-acidity and the aquo bridges are strongly hydrogen bonded with the eta-1-carboxylato facial ligands. The diruthenium(II) compounds are diamagnetic and exhibit characteristic H-1 NMR spectra in CDCl3. These compounds display two metal-centered one-electron oxidations near +0.3 and +1.0 V (vs SCE) in CH2Cl2-TBAP. The overall reaction between 1 and PPh3 in MeCN-H2O through the intermediacy of 2 is of the disproportionation type. The significant role of facial as well as bridging ligands in stabilizing the core structures is observed from electrochemical studies.