Surface morphology of Diplodon expansus (Kuster, 1856; Mollusca, Bivalvia, Hyriidae) gill filaments after exposure to environmentally relevant concentrations of atrazine herbicide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the morphology of the worker immatures of the leafcutter ant Atta sexdens linnaeus (Hymenoptera: Formicidae)

Leafcutter ants of the genus Atta Fabricius are serious agricultural pests. Morphological studies of immature stages within this group are few, and the data provided for species of considerable importance are usually incomplete. In this study, the immatures of Atta sexdens Linnaeus are described and compared using light and scanning electron microscopy. Only specimens from founding stage colonies (i.e., lacking adult workers) were used. The existence of four larval instars was estimated by a frequency plot of maximum head widths, and the larvae of different instars differed from each other mainly by their bodily dimensions. Worker larvae belonged to two distinct morphological castes: (1) gardeners and nurses and (2) within-nest generalists. The worker larvae described in this study differed from a previous description of the same species by the following traits: the existence of a genal lobe, the number of clypeal hairs, the presence of two hairs on the ninth abdominal somite, the presence of hairs on the anterior surface of the labrum, and the shape of the maxillary palpus. This study provides a comparative analysis of immature stages of A. sexdens that may be relevant to future morphological and biological studies of the Attini. Microsc. Res. Tech. 75:10591065, 2012. (c) 2012 Wiley Periodicals, Inc.

Diversity of Epigeal Ants (Hymenoptera: Formicidae) in Urban Areas of Alto Tiete

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Developmental anatomy and morphology of the ovule and seed of Heliconia (Heliconiaceae, Zingiberales)

The developmental anatomy and morphology of the ovule and seed in several species of Heliconia were investigated as part of an embryological study of the Heliconiaceae and to provide a better understanding of their relationships with the other families of the Zingiberales. Heliconia species have an ovule primordium with an outer integument of both dermal and subdermal origin. The archesporial cell is divided into a megasporocyte and a single parietal cell, which in turn are divided only anticlinally to form a single parietal layer, disintegrating later during gametogenesis. The embryo sac was fully developed prior to anthesis. In the developing seed, the endosperm was nuclear, with wall formation in the globular stage; a nucellar pad was observed during embryo development, but later became compressed. The ripe fruit contained seeds enveloped by a lignified endocarp that formed the pyrenes, with each pyrene having an operculum at the basal end; the embryo was considered to be differentiated. Most of these characteristics are shared with other Zingiberales, although the derivation of the operculum from the funicle and the formation of the main mechanical layer by the endocarp are unique to the Heliconiaceae.

Reproductive morphology of the early-divergent grass Streptochaeta and its bearing on the homologies of the grass spikelet

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphology of trichomes in Tibouchina sect. Pleroma (D-Don) Cogn. (Melastomataceae)

The Melastomataceae display greater trichome diversity. Dr. Wurdack, in his Atlas of hairs, recognized 46 types of trichomes for the Neotropical Melastomataceae through the Scanning Electron Microscope (SEM), and referred 17 of them to the genus Tibouchina. The trichome morphology has been extensively used in the delimitation of the taxa in Melastomataceae, as well as in previous studies by Cogniaux, the monograph of Brazilian Melastomataceae published in 1885. The morphology of the trichomes was essential for the delimitation of several species in Tibouchina section Pleroma. The use of SEM provided the best characterization of the 15 different types of trichomes recognized among the 41 species examined. These were described based on the morphological appearance, both optical microscopy and scanning electron microscopy, and illustrated by scanning electron micrographs and photomicrographs.

Comparative morphology of the tongue in free-tailed bats (Chiroptera, Molossidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphology of Richards' Gland in the Wasp Metapolybia docilis

Richards gland in the epiponine wasp Metapolybia docilis occurs at the anterior side of the 5(th) abdominal sternite, and is formed by approx. 360 secretory cells. The cells discharge their secretory products through accompanying duct cells into a reservoir that is formed by the invaginated intersegmental membrane between the 4(th) and 5(th) sternites. The ultrastructural characteristics of the secretory cells are indicative for the production of a non-proteinaceous secretion, which is in line with the trail substance that is used by these wasps during their swarm-founding.

Bond strength and morphology of resin materials applied to the occlusal surface of primary molars

International Journal of Paediatric Dentistry 2012; 22: 435441 Background. Hydrophilic adhesives may be used as pit and fissure sealants (sealants), but there is concern about the ability of self-etching adhesives to bond sealants to enamel. Aim. To study the bond strength (BS) and morphology of adhesive systems used as sealants. Design. OptiBond FL, OptiBond All-in-One, combined OptiBond All-in-One + OptiBond FL adhesive, and Fluroshield were applied to the occlusal surfaces of 16 primary molars (n = 4). Teeth were stored in distilled water (24 h at 37 degrees C) and sectioned through the interface to obtain sticks (0.8 mm2) tested under a tensile load (0.5 mm/min). Failure modes were observed. Data were analysed by ANOVA and Tukeys tests (a = 5%). The morphology of 12 primary molars was examined in terms of the etching pattern and resin reproduction. Results. Differences in the BS were found (P = 0.001), with OptiBond FL showing the highest (36.84 +/- 5.7 MPa), Fluroshield (24.26 +/- 2.13 MPa) and OptiBond All-in-One (17.12 +/- 4.97 MPa) similar, and OptiBond All-in-One + OptiBond FL adhesive the lowest (9.8 +/- 2.94 MPA). OptiBond FL showed the best results in terms of morphology. Conclusion. Under the conditions of this study, OptiBond FL was the best material to be used for sealing.

Influence of oxygen flow on crystallization and morphology of LiNbO3 thin films

Polymeric precursor solution (Pechini method) was used to deposit LiNbO3 thin films by spin-coating on (100) silicon substrates. X-ray diffraction data of thin films showed that the increase of oxygen flow promotes a preferred orientation of (001) LiNbO3 planes parallel to the substrate surface. Surface roughness and grain size, observed by atomic force microscopy, change also with oxygen flow.

Influence of oxygen flow on crystallization and morphology of PLZT thin films

PLZT thin films were prepared by a dip coating process using Pechini's method, also known as polymeric precursor method. The PLZT solution was obtained from a mixture of the individual cation solutions and the process to prepare each solution is based on metallic citrate polymerization. The viscosity of the PLZT solution was adjusted at 40 cP while the ionic concentration was adjusted at 0.1 M. PLZT solutions were deposited on silicon (100) and platinum coated silicon (100) substrates with withdrawal speed at 5 mm/min. The coated substrates were thermally treated with a heating rate of 1 degreesC/min up to 300 degreesC and 5 degreesC/min up to 650 degreesC in order to obtain homogeneous and cracks free films. The influence of oxygen flow on crystallization and morphology of PLZT (9/65/35) thin film is discussed. (C) 2002 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Influence of viscosity and ionic concentration on morphology of PLZT thin films

PLZT thin films were prepared by a dip-coating process using Pechini's method. The PLZT solution was obtained from the mixture of the cation solutions. The viscosity of the solution was adjusted in the range of 20-40 cP, while the ionic concentration was adjusted in the range of 0.1 and 0.2 M. PLZT solutions were deposited on Si (1 0 0) substrate with withdrawal speed at 5 mm/min. The coated substrates were thermally treated with heating rate of 1 degreesC/min up to 300 and 5 degreesC/ min up to 650 degreesC in order to obtain homogeneous and crack free films. The influence of viscosity and ionic concentration on crystallization and morphology of PLZT (9/65/35) thin film will be discussed. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Morphology of eggs of Dioctophyme renale Goeze, 1782 (Nematoda: Dioctophymatidae) and influences of temperature on development of first-stage larvae in the eggs

Este estudo teve a finalidade de fornecer dados morfológicos de ovos de D. renale e do desenvolvimento de larvas de primeiro estádio em ovos mantidos em diferentes temperaturas. Os ovos foram obtidos por centrífugação da urina de cães parasitados e colocados em placas de Petri em estufa BOD, durante 90 dias. O experimento consistiu de três tratamentos (GI - 15 ºC, GII - 20 ºC e GIII - 26 ºC) com cinco repetições cada. Os ovos apresentaram tamanho médio de 67,23 x 42,78 µm, e o tempo médio de incubação foi inversamente proporcional à temperatura de incubação e as larvas apresentaram motilidade por aproximadamente uma semana após sua formação.

Morphology of the testicles of some brazilian species of Diplopoda and their phyllogenetic relations

The morphology of the testicles of some Brazilian species of Diplopoda is described. One type is scalariform, with two deferent ducts and the other consists of some single deferent duct. Phyllogenetic considerations on the structure are made.

Zoeal morphology of Pachygrapsus transversus (Gibbes) (Decapoda, Grapsidae) reared in the laboratory

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)