Análise Energética do processo experimental de produção de Biodiesel a partir do óleo de frango

There is a great global concern about the depletion and the high cost of fossil fuel reserves exploitation, more than ever, it is necessary to make a profound study and take advantage of alternative sources that can be used as energy efficiency with an appropriate pricing and low environmental impact. Brazil, which has highlighted using alternative energy sources as the use of ethanol and, in recent years, has been encouraging the expansion of its energy matrix in which the biodiesel will have a strategic importance within the agrobusiness area. Biodiesel is a fuel that can replace the diesel, which is a petroleum derivative. It is an ester, produced in the transesterification reaction of vegetable oils and animal greases, in an alcohol with an additional catalyst, are converted into fatty acids and result in esters with glycerol as sub products. The objective of this study was to estimate the final energy balance for the process biodiesel production from oil chicken waste. The energy balance estimation was quantified in calorific value according to the energy expenditure by calorimetric bomb method. The relationship between input and output of energy was around 0.97. In a first evaluation, the procedures adopted should be improved enough, so the process can become energetic and economically viable.

Modelagem da irradiação direta na incidência normal em Botucatu: aprendizado de máquina, estatístico e linke

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Viabilidade técnica e econômica do superadobe na construção de casas populares

The need for affordable housing and the high cost of today's building materials make necessary to look for useful and affordable technologies for these house buildings. In this context, this study aimed to evaluate the technical and economic feasibility of construction technology called Earthbag for use in public housing. Technical assessments were based on Kiffmeyer and Hunter's book (2004), academics dissertations and construction standards for the technology. The result allowed a positive evaluation towards the feasibility proposal and showing the possibility of replace the use of structural concrete blocks in public housing. The economic viability was performed an economical compared to a project Housing Project Bom Retiro 2 with one of Earthbag which have been shown considerable savings between the techniques. For the construction of masonry, build with purchased sand, 13% lower budget was found in comparison of a concrete masonry block. With the use of sand from the work site itself, there is a saving of 18%. Although earthbag has proven to be a technically and economically feasible for application in the construction of affordable housing, the shortage of technical and scientific studies and Brazilian regulations on this technology has limited its large-scale use

Estudo da viabilidade de produção da peça alimentação/ladrão para banheiras

The product development field daily works in the chase of new materials and technologies that fulfills the requirements of the consumer market. So, projects are developed in order to theoretically predict what will actually happen. The production of household appliance is not different. To provide a pleasant bath to the costumer, the manufacture of a bathtub counts on many components. With this in mind, this work goal is to study the possibility of production by plastic injection of the assembly water source/overflow pipe used in bathtubs and compare its production cost with the cost of the assembly acquired from third parties. The injection process is widely used on the world stage because of its numerous advantages, however, due to the high cost of the molds, it is important to estimate the time required for the return of the initial investment. To do this, a model was designed to examine its dimensions and then initiate the study of the possibility to inject the components with the available injection machine and the production cycle. With the results, it was found that there was a reduction in the cost of the finished assembly, but a very long time to return the initial investment due to the current financial scenery of the country

Viabilidade técnica e econômica do superadobe na construção de casas populares

The need for affordable housing and the high cost of today's building materials make necessary to look for useful and affordable technologies for these house buildings. In this context, this study aimed to evaluate the technical and economic feasibility of construction technology called Earthbag for use in public housing. Technical assessments were based on Kiffmeyer and Hunter's book (2004), academics dissertations and construction standards for the technology. The result allowed a positive evaluation towards the feasibility proposal and showing the possibility of replace the use of structural concrete blocks in public housing. The economic viability was performed an economical compared to a project Housing Project Bom Retiro 2 with one of Earthbag which have been shown considerable savings between the techniques. For the construction of masonry, build with purchased sand, 13% lower budget was found in comparison of a concrete masonry block. With the use of sand from the work site itself, there is a saving of 18%. Although earthbag has proven to be a technically and economically feasible for application in the construction of affordable housing, the shortage of technical and scientific studies and Brazilian regulations on this technology has limited its large-scale use

Estudo da viabilidade de produção da peça alimentação/ladrão para banheiras

The product development field daily works in the chase of new materials and technologies that fulfills the requirements of the consumer market. So, projects are developed in order to theoretically predict what will actually happen. The production of household appliance is not different. To provide a pleasant bath to the costumer, the manufacture of a bathtub counts on many components. With this in mind, this work goal is to study the possibility of production by plastic injection of the assembly water source/overflow pipe used in bathtubs and compare its production cost with the cost of the assembly acquired from third parties. The injection process is widely used on the world stage because of its numerous advantages, however, due to the high cost of the molds, it is important to estimate the time required for the return of the initial investment. To do this, a model was designed to examine its dimensions and then initiate the study of the possibility to inject the components with the available injection machine and the production cycle. With the results, it was found that there was a reduction in the cost of the finished assembly, but a very long time to return the initial investment due to the current financial scenery of the country

A skin surface characterization system based on capacitive image analysis

During the last few years, several methods have been proposed in order to study and to evaluate characteristic properties of the human skin by using non-invasive approaches. Mostly, these methods cover aspects related to either dermatology, to analyze skin physiology and to evaluate the effectiveness of medical treatments in skin diseases, or dermocosmetics and cosmetic science to evaluate, for example, the effectiveness of anti-aging treatments. To these purposes a routine approach must be followed. Although very accurate and high resolution measurements can be achieved by using conventional methods, such as optical or mechanical profilometry for example, their use is quite limited primarily to the high cost of the instrumentation required, which in turn is usually cumbersome, highlighting some of the limitations for a routine based analysis. This thesis aims to investigate the feasibility of a noninvasive skin characterization system based on the analysis of capacitive images of the skin surface. The system relies on a CMOS portable capacitive device which gives 50 micron/pixel resolution capacitance map of the skin micro-relief. In order to extract characteristic features of the skin topography, image analysis techniques, such as watershed segmentation and wavelet analysis, have been used to detect the main structures of interest: wrinkles and plateau of the typical micro-relief pattern. In order to validate the method, the features extracted from a dataset of skin capacitive images acquired during dermatological examinations of a healthy group of volunteers have been compared with the age of the subjects involved, showing good correlation with the skin ageing effect. Detailed analysis of the output of the capacitive sensor compared with optical profilometry of silicone replica of the same skin area has revealed potentiality and some limitations of this technology. Also, applications to follow-up studies, as needed to objectively evaluate the effectiveness of treatments in a routine manner, are discussed.

Investigation on laser shock peening capability by FE simulation

Laser shock peening is a technique similar to shot peening that imparts compressive residual stresses in materials for improving fatigue resistance. The ability to use a high energy laser pulse to generate shock waves, inducing a compressive residual stress field in metallic materials, has applications in multiple fields such as turbo-machinery, airframe structures, and medical appliances. The transient nature of the LSP phenomenon and the high rate of the laser's dynamic make real time in-situ measurement of laser/material interaction very challenging. For this reason and for the high cost of the experimental tests, reliable analytical methods for predicting detailed effects of LSP are needed to understand the potential of the process. Aim of this work has been the prediction of residual stress field after Laser Peening process by means of Finite Element Modeling. The work has been carried out in the Stress Methods department of Airbus Operations GmbH (Hamburg) and it includes investigation on compressive residual stresses induced by Laser Shock Peening, study on mesh sensitivity, optimization and tuning of the model by using physical and numerical parameters, validation of the model by comparing it with experimental results. The model has been realized with Abaqus/Explicit commercial software starting from considerations done on previous works. FE analyses are “Mesh Sensitive”: by increasing the number of elements and by decreasing their size, the software is able to probe even the details of the real phenomenon. However, these details, could be only an amplification of real phenomenon. For this reason it was necessary to optimize the mesh elements' size and number. A new model has been created with a more fine mesh in the trough thickness direction because it is the most involved in the process deformations. This increment of the global number of elements has been paid with an "in plane" size reduction of the elements far from the peened area in order to avoid too high computational costs. Efficiency and stability of the analyses has been improved by using bulk viscosity coefficients, a merely numerical parameter available in Abaqus/Explicit. A plastic rate sensitivity study has been also carried out and a new set of Johnson Cook's model coefficient has been chosen. These investigations led to a more controllable and reliable model, valid even for more complex geometries. Moreover the study about the material properties highlighted a gap of the model about the simulation of the surface conditions. Modeling of the ablative layer employed during the real process has been used to fill this gap. In the real process ablative layer is a super thin sheet of pure aluminum stuck on the masterpiece. In the simulation it has been simply reproduced as a 100µm layer made by a material with a yield point of 10MPa. All those new settings has been applied to a set of analyses made with different geometry models to verify the robustness of the model. The calibration of the model with the experimental results was based on stress and displacement measurements carried out on the surface and in depth as well. The good correlation between the simulation and experimental tests results proved this model to be reliable.

Molecole bioattive naturali e sintetiche per la terapia di malattie da aumentato riassorbimento osseo

Le terapie convenzionali per le malattie da aumentato riassorbimento osseo sono limitate dalla tossicità sistemica, bassa biodisponibilità farmacologica e scarsa aderenza alle terapie. In questo studio sono stati considerati approcci terapeutici innovativi basati su composti naturali e sintetici. I) Valutazione dell'attività biologica di composti naturali. Evidenze sperimentali hanno dimostrato l’attività antiproliferativa ed antiapoptotica di piante della Medicina ayurvedica. Queste proprietà sono sfruttabili nel trattamento di malattie da aumentato riassorbimento osseo, come l'osteoporosi. Per chiarire i possibili effetti terapeutici di questi composti, sono stati studiati i decotti di Rubia cordifolia, Hemidesmus indicus, Emblica officinalis, ed Asparagus racemosus. Hemidesmis indicus si è dimostrato il più efficace. II) Valutazione dell'attività biologica di composti sintetici. I bisfosfonati (BP) sono farmaci capaci di legarsi alle superfici minerali ossee e all’idrossiapatite, nei siti di rimodellamento osseo. Poiché i BP inibiscono la funzione degli osteoclasti, sono convenzionalmente impiegati nel trattamento di malattie da aumentato riassorbimento osseo, come l'osteoporosi. Tuttavia, gli elevati costi e gli effetti collaterali legati alla somministrazione determinano una scarsa aderenza al trattamento condizionandone l’efficacia. Scopo di questo studio è stato quello di valutare l'attività biologica di BP chimicamente innovativi, meno tossici e sintetizzati con strategie catalitiche semplificate ed ecocompatibili, in modo da ridurre i costi di produzione. È stato valutato l’effetto citotossico e antiosteoclastico dei composti e confrontato con quello dei BP comunemente impiegati in clinica (neridronato, pamidronato e alendronato). I risultati sono stati considerati raggiunti qualora fossero identificati BP di nuova sintesi non citotossici e capaci di conservare almeno il 90% della capacità dei substrati di base di inibire il riassorbimento osseo. Tutti i composti di nuova sintesi sono risultati meno tossici del BP convenzionale, anche a concentrazioni più elevate ed i più efficaci sono stati un BP coniugato con acido biliare, un BP aromatico contenente azoto ed un BP alifatico contenente zolfo.

Evaluating retraining rules for semi-supervised learning in neural network based cursive word recognition

Training a system to recognize handwritten words is a task that requires a large amount of data with their correct transcription. However, the creation of such a training set, including the generation of the ground truth, is tedious and costly. One way of reducing the high cost of labeled training data acquisition is to exploit unlabeled data, which can be gathered easily. Making use of both labeled and unlabeled data is known as semi-supervised learning. One of the most general versions of semi-supervised learning is self-training, where a recognizer iteratively retrains itself on its own output on new, unlabeled data. In this paper we propose to apply semi-supervised learning, and in particular self-training, to the problem of cursive, handwritten word recognition. The special focus of the paper is on retraining rules that define what data are actually being used in the retraining phase. In a series of experiments it is shown that the performance of a neural network based recognizer can be significantly improved through the use of unlabeled data and self-training if appropriate retraining rules are applied.

ProFormA: An XML-based exchange format for programming tasks

Unterstützungssysteme für die Programmierausbildung sind weit verbreitet, doch gängige Standards für den Austausch von allgemeinen (Lern-) Inhalten und Tests erfüllen nicht die speziellen Anforderungen von Programmieraufgaben wie z. B. den Umgang mit komplexen Einreichungen aus mehreren Dateien oder die Kombination verschiedener (automatischer) Bewertungsverfahren. Dadurch können Aufgaben nicht zwischen Systemen ausgetauscht werden, was aufgrund des hohen Aufwands für die Entwicklung guter Aufgaben jedoch wünschenswert wäre. In diesem Beitrag wird ein erweiterbares XML-basiertes Format zum Austausch von Programmieraufgaben vorgestellt, das bereits von mehreren Systemen prototypisch genutzt wird. Die Spezifikation des Austauschformats ist online verfügbar [PFMA].

Hepatitis C: a changing epidemic.

Approximately 3% of the world population is estimated to have a chronic hepatitis C virus (HCV) infection and 500,000 individuals die from its consequences yearly. Persons who inject drugs (PWID) bear the majority of the disease burden in high-income countries. Drug substitution programmes have helped reduce HCV transmissions among PWID. However, recent epidemics of sexually transmitted HCV infections in HIV-infected men who have sex with men demonstrated the changing nature of the HCV epidemic. HCV therapy is undergoing a revolution, as new interferon-free, oral treatments eradicate HCV infections in almost all treated patients. As a consequence, the eradication of HCV has become a matter of debate and is becoming an important future public health target. However, for this to be achieved, many challenges need to be addressed, including the poor uptake of HCV testing, the high cost of the new antiviral combinations and the high frequency of re-infections after treatment in some populations.

Producir para el agro en un entorno turbulento. El caso de una fábrica de cosechadoras en la Argentina

La producción de maquinaria agrícola en la Argentina se inicia muy tempranamente, estimulada por las amplias posibilidades que brindaba la producción de cereales. Un rasgo destacable del sector se refiere a la importante tradición en innovación tecnológica, sin duda alentada por la naturaleza específica de la producción agrícola en nuestro país y por los altos costos de las maquinas importadas. Esta tradición en innovación y el entramado territorial resultarán claves para entender el desarrollo de una firma fabricante de cosechadoras en el sur de Santa Fe a partir de la década del cincuenta. Pueden identificarse cuatro grandes etapas en la trayectoria de Roque Vassalli SA; cada una de estas etapas presentadas en el trabajo de manera cronológica enfatiza algún aspecto de la dinámica empresarial que explica el desempeño productivo y la evolución económico-financiera de la firma en ese período. De este modo, en una primera etapa se destacan la disposición innovadora del empresario fundador, su ensamblaje con las políticas públicas de promoción del sector y la fuerte apuesta a la conformación de una red de distribuidores como factores claves para la consolidación de la empresa en el mercado interno. En cambio, en una segunda etapa se enfatiza en los problemas que presentó el mercado de maquinarias agrícolas en la segunda mitad de los años sesenta que terminaron por afectar su situación productiva y financiera. En el tercer apartado el trabajo enfoca las variables que permiten explicar la recuperación de la empresa, principalmente en la importante dinámica del mercado interno pero también en las estrategias de comercialización y la captura de amplios mercados externos. Finalmente, el análisis en la cuarta etapa destaca los límites estrechos que la coyuntura macroeconómica impuso a la gestión empresarial y que terminó con la venta de la empresa.

Producir para el agro en un entorno turbulento. El caso de una fábrica de cosechadoras en la Argentina

La producción de maquinaria agrícola en la Argentina se inicia muy tempranamente, estimulada por las amplias posibilidades que brindaba la producción de cereales. Un rasgo destacable del sector se refiere a la importante tradición en innovación tecnológica, sin duda alentada por la naturaleza específica de la producción agrícola en nuestro país y por los altos costos de las maquinas importadas. Esta tradición en innovación y el entramado territorial resultarán claves para entender el desarrollo de una firma fabricante de cosechadoras en el sur de Santa Fe a partir de la década del cincuenta. Pueden identificarse cuatro grandes etapas en la trayectoria de Roque Vassalli SA; cada una de estas etapas presentadas en el trabajo de manera cronológica enfatiza algún aspecto de la dinámica empresarial que explica el desempeño productivo y la evolución económico-financiera de la firma en ese período. De este modo, en una primera etapa se destacan la disposición innovadora del empresario fundador, su ensamblaje con las políticas públicas de promoción del sector y la fuerte apuesta a la conformación de una red de distribuidores como factores claves para la consolidación de la empresa en el mercado interno. En cambio, en una segunda etapa se enfatiza en los problemas que presentó el mercado de maquinarias agrícolas en la segunda mitad de los años sesenta que terminaron por afectar su situación productiva y financiera. En el tercer apartado el trabajo enfoca las variables que permiten explicar la recuperación de la empresa, principalmente en la importante dinámica del mercado interno pero también en las estrategias de comercialización y la captura de amplios mercados externos. Finalmente, el análisis en la cuarta etapa destaca los límites estrechos que la coyuntura macroeconómica impuso a la gestión empresarial y que terminó con la venta de la empresa.

Producir para el agro en un entorno turbulento. El caso de una fábrica de cosechadoras en la Argentina

La producción de maquinaria agrícola en la Argentina se inicia muy tempranamente, estimulada por las amplias posibilidades que brindaba la producción de cereales. Un rasgo destacable del sector se refiere a la importante tradición en innovación tecnológica, sin duda alentada por la naturaleza específica de la producción agrícola en nuestro país y por los altos costos de las maquinas importadas. Esta tradición en innovación y el entramado territorial resultarán claves para entender el desarrollo de una firma fabricante de cosechadoras en el sur de Santa Fe a partir de la década del cincuenta. Pueden identificarse cuatro grandes etapas en la trayectoria de Roque Vassalli SA; cada una de estas etapas presentadas en el trabajo de manera cronológica enfatiza algún aspecto de la dinámica empresarial que explica el desempeño productivo y la evolución económico-financiera de la firma en ese período. De este modo, en una primera etapa se destacan la disposición innovadora del empresario fundador, su ensamblaje con las políticas públicas de promoción del sector y la fuerte apuesta a la conformación de una red de distribuidores como factores claves para la consolidación de la empresa en el mercado interno. En cambio, en una segunda etapa se enfatiza en los problemas que presentó el mercado de maquinarias agrícolas en la segunda mitad de los años sesenta que terminaron por afectar su situación productiva y financiera. En el tercer apartado el trabajo enfoca las variables que permiten explicar la recuperación de la empresa, principalmente en la importante dinámica del mercado interno pero también en las estrategias de comercialización y la captura de amplios mercados externos. Finalmente, el análisis en la cuarta etapa destaca los límites estrechos que la coyuntura macroeconómica impuso a la gestión empresarial y que terminó con la venta de la empresa.