894 resultados para Teste físico - Medidas de avaliação


Relevância:

40.00% 40.00%

Publicador:

Resumo:

A imagem digital adquirida pelo sistema da placa de fósforo foto ativada é visualizada no monitor do computador em um formato denominado DICOM. Este formato ocupa muito espaço para armazenamento, o que dificulta o arquivamento e transmissão da imagem pela Internet. O objetivo deste estudo foi avaliar a influência da compressão JPEG, nos Fatores de Qualidade 100, 80 e 60 na reprodutibilidade da marcação de pontos cefalométricos em imagens de telerradiografias em norma lateral comparadas com o formato DICOM. A amostra consistiu de 120 imagens de telerradiografias em norma lateral obtidas a partir de 30 indivíduos, dos quais se obteve uma radiografia digital no formato DICOM. Essas imagens foram convertidas para o formato JPEG. Após o cegamento e randomização da amostra, três Ortodontistas calibrados marcaram a localização de 12 pontos cefalométricos em cada imagem utilizando o sistema de coordenadas X e Y. Esse procedimento foi repetido após 1 mês. A reprodutibilidade intra e inter observador foi calculada usando o teste de correlação intraclasse. Para comparação entre os grupos de compressão e DICOM na reprodutibilidade de marcação dos pontos utilizou se a Análise de Variância (ANOVA) a um critério para medidas repetidas. Os resultados mostraram que as marcações dos pontos cefalométricos foram bastante reprodutíveis, exceto para o ponto Órbita na coordenada X. Os diferentes formatos de arquivo mostraram estatisticamente iguais para cada ponto e eixo aferido. As compressões JPEG estudadas das imagens de telerradiografias em norma lateral não tiveram efeito na reprodutibilidade da marcação dos pontos cefalométricos testados.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Este trabalho teve como objetivo principal avaliar as inclinações dentárias e o perfil facial de pacientes tratados ortodonticamente com braquete autoligado Damon 2, prescrição padrão. Para este estudo, foi selecionada uma amostra de 18 indivíduos, sendo 12 do sexo masculino e 6 do feminino, com idades que variaram de 12 a 20 anos (idade média de 15 anos) e que apresentavam discrepância de modelo negativa (de 4 mm a 15 mm). Como critério de inclusão, os pacientes deveriam apresentar dentição permanente completa até os segundos molares, má oclusão de Classe I de Angle, telerradiografias em norma lateral do início e final do tratamento ortodôntico e modelos de estudo em gesso dos arcos dentários superiores e inferiores do início e final do tratamento ortodôntico. As medições das inclinações ântero-posteriores dos incisivos centrais superiores e incisivos centrais inferiores e alterações do perfil facial foram realizadas por meio das telerradiografias em norma lateral. As distâncias transversais das regiões de cúspide e cervical inter-caninos, primeiros e segundos pré-molares e primeiros molares, foram obtidas medindo-se os modelos de gesso. Todas as mensurações foram realizadas nas telerradiografias e modelos de gesso obtidos antes do início do tratamento ortodôntico (T1) e no final do tratamento (T2). Após a coleta de todos os dados aplicou-se o teste t de Student para comparar as medidas dos dois tempos avaliados neste estudo. Verificou-se diferença estatisticamente significante (p<0,05) na inclinação dos incisivos centrais inferiores e nas dimensões transversais inter-cúspides e inter-cervicais dos primeiros e segundos pré-molares e primeiros molares na maxila. Na mandíbula todas as distâncias transversais (inter cúspides e cervicais) de caninos, primeiros e segundos pré-molares e primeiros molares apresentaram significância estatística (p<0,05), exceto a distância inter-cervical dos caninos inferiores. Concluímos que o tratamento ortodôntico sem extrações de pacientes com má oclusão de Classe I realizados com os braquetes Damon 2, prescrição padrão, não promoveu alteração na inclinação vestíbulo-lingual dos incisivos centrais superiores, aumentou a inclinação vestibular dos incisivos centrais inferiores, não alterou o perfil facial e aumentou de modo significativo a dimensão transversal da maxila e da mandíbula por meio de inclinação vestibular de coroa.(AU)

Relevância:

40.00% 40.00%

Publicador:

Resumo:

O objetivo desta pesquisa constituiu em avaliar, por meio das telerradiografias posteroanteriores, as alterações transversais promovidas pelo aparelho Frankel-2 em pacientes com maloclusão de Classe II, divisão 1, além de verificar a estabilidade das mesmas após um período médio de 7,11 anos pós-tratamento. A amostra compreendeu um total de 45 telerradiografias posteroanteriores provenientes de 15 pacientes tratados com o RF-2, realizadas em três fases: (T1) início do tratamento; (T2) final de tratamento; (T3) pós-tratamento. Foram avaliadas outras 36 telerradiografias posteroanteriores de 18 pacientes não tratados (grupo controle), acompanhados num período correspondente ao tratamento (T1-T2). As telerradiografias foram digitalizadas e foi utilizado o software Radiocef Studio 2 para realizar as mensurações das medidas cefalométricas. Para a comparação entre as alterações ocorridas no grupo tratado e no grupo controle, foi aplicado o teste t não pareado. Já para as modificações nas fases inicial, final e pós-tratamento no grupo tratado, foi empregada a Análise de Variância seguida do teste de comparações múltiplas de Tukey, com o valor crítico de 0,05. Os resultados mostraram que durante o período de tratamento as distâncias intercaninos inferiores e intermolares superiores aumentaram de forma estatisticamente significante. Já as distâncias que representam a largura da cavidade nasal, altura facial inferior, largura mandibular e distância intermolares inferiores não sofreram alterações estatisticamente significantes. No período pós-tratamento, observou-se uma suave redução nas distâncias intercaninos inferiores e intermolares superiores. Porém, considerando-se as alterações ocorridas devido ao crescimento e desenvolvimento transversal dos arcos dentários no período analisado, em que haveria uma redução destas distâncias, provavelmente houve uma estabilidade relativa das alterações dentárias transversais promovidas pelo RF-2. Portanto, pode-se concluir que o RF-2 não possui qualquer efeito esquelético transversal. Contudo, há um aumento das distâncias intermolares superiores e intercaninos inferiores durante o tratamento, que permanece relativamente estável, considerando-se as alterações ocorridas pelo crescimento e desenvolvimento normal dos arcos dentários.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Pelo fato das consequências do uso de aparelhos ortopédicos fixos sobre o periodonto ósseo vestibular e lingual ainda serem uma incógnita para o ortodontista clínico e pesquisador, este estudo teve como objetivo avaliar, por meio de tomografia computadorizada de feixe cônico (TCFC) as alterações em espessura das tábuas ósseas vestibulares e linguais em primeiros molares superiores e incisivos e caninos inferiores, após a utilização de aparelhagem fixa e dos aparelhos Twin Force (grupo A) e Forsus (grupo B) para o tratamento da maloclusão de Classe II, 1ª divisão. Para tanto, obteve-se uma amostra de 22 pacientes jovens adultos, divididos em dois grupos, de acordo com o aparelho propulsor da mandíbula. Grupo experimental A: 11 pacientes, 6 masculinos e 5 femininos, com idade média de 15,09 anos na instalação do Twin Force, e 11 pacientes, 7 masculinos e 4 femininos, com idade média de 15,45 anos na instalação do Forsus. O tempo médio de uso do aparelho Twin Force foi de 3,73 meses e do Forsus, 7,09 meses. O grupo A realizou TCFC antes do início do tratamento (T1), antes da instalação do Twin Force (T2), após a remoção do Twin Force (T3); e o grupo B somente antes da instalação do Forsus (T2) e após a remoção do Forsus (T3). Para comparação entre os tempos T2 e T3 foi utilizado o teste t pareado e entre os tempos T1, T2 e T3 foi utilizada a Análise de Variância (ANOVA) a um critério e o teste post-hoc de Tukey. Para comparação entre os grupos foi utilizado o teste t . Na comparação intergrupos os resultados evidenciaram que não houve diferença estatisticamente significante entre as alterações das espessuras das tábuas ósseas vestibular e lingual; por outro lado, na avaliação intra-grupo, de 48 medidas avaliadas, no grupo A houve reduções estatisticamente significantes nos terços cervical e médio por vestibular, nos dentes anteroinferiores e nos primeiros molares superiores e aumento nos terços cervical e médio, por lingual nos dentes anteriores inferiores, totalizando 25 medidas significantes. Já no grupo B, houve aumento significante da tábua óssea lingual nos dentes anteriores inferiores e redução em vestibular nos molares superiores, totalizando apenas sete medidas significantes, mas com mais medidas significantes de redução óssea vestibular em terços cervical e médio nos primeiros molares superiores, em comparação com o grupo A. Não houve diferença significante entre as medições obtidas com voxel 0,2 mm e 0,4 mm e nem dimorfismo entre os gêneros. As reduções em espessura óssea alveolar, principalmente em terços cervicais e médios vestibulares nos dentes avaliados neste estudo são um alerta ao clínico, para que realize essa abordagem diagnóstica periodontal antes de iniciar o tratamento ortodôntico.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

O objetivo deste estudo prospectivo foi avaliar os efeitos do aparelho Forsus® nos incisivos centrais superiores e inferiores. A amostra constituiu-se de 22 tomografias computadorizadas de 11 pacientes (sexo masculino e feminino) idade média de 15,8 anos com má oclusão de Classe II que foram tratados com o aparelho Forsus® na clínica do programa de pós-graduação em Odontologia, área de concentração Ortodontia, da Universidade Metodista de São Paulo. As tomografias foram obtidas em dois momentos T1 (final de nivelamento e antes da instalação do Forsus® e T2 (remoção do Forsus®). Para avaliar a distância do ápice até a tábua óssea, as imagens a serem examinadas foram obtidas com o auxílio do viewer do próprio i-CAT® , o iCATVision® e examinadas com o CorelDRAW X5® já para as medidas cefalométricas IMPA e 1.PP as imagens cefalométricas ortogonais foram obtidas em proporção 1:1 com auxílio do software Dolphin 3D® (Dolphin Imaging and Management Solutions, Chatsworth, EUA) e em seguida examinadas com o software Radiocef Studio 2 (Radio Memory, Belo Horizonte, Brasil). Para a obtenção do erro intra-examinador foi feito o teste t de Student pareado para o erro sistemático e a fórmula de DAHLBERG para estimar a ordem de grandeza dos erros casuais e na análise estatística dos resultados utilizou-se: o teste t para a determinação das diferenças entres as fases de observação e o teste de correlação de Pearson para avaliar a correlação entres as alterações. Observou-se: um aumento significativo (p<0,05) tanto no IMPA quanto no 1.PP, aproximação do ápice dos incisivos inferiores da tábua óssea lingual, aproximação do ápice dos incisivos superiores da tábua óssea vestibular, uma correlação negativa muito forte entre o IMPA e a distância do ápice do incisivo até a tábua óssea lingual e uma correlação negativa moderada entre 1.PP e a distância do ápice do incisivo até a tábua óssea vestibular. Sendo assim o aparelho Forsus® no tratamento da Classe II teve como efeito: vestibularização significativa dos incisivos centrais inferiores, uma verticalização significativa dos incisivos centrais superiores, aproximação do ápice dos incisivos inferiores da cortical óssea lingual e aproximação do ápice dos incisivos superiores da cortical óssea vestibular.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

O objetivo do estudo consistiu em verificar uma possível alteração no tamanho da coroa clínica dos dentes ântero-inferiores em 50 indivíduos portadores de má Oclusão de Angle Classe II. A amostra foi dividida em 2 grupos: um grupo tratado com 25 indivíduos (14 do sexo masculino e 11 do feminino) com idade média em T1 (tempo inicial do tratamento) de 11 anos (dp = 9 meses), e em T2 (tempo pós-tratamento) de 12 anos e 7 meses (dp = 7 meses), tratados com o aparelho regulador de função Fränkel-2, durante 18 meses; e, um grupo controle com 25 indivíduos (12 do sexo masculino e 13 do feminino) com idade média em T1 de 10 anos e 3 meses (dp = 11 meses) e em T2 de 12 anos e 1 mês (dp = 11 meses). Os 100 modelos em gesso dos indivíduos foram analisados e comparados em relação ao início e ao término do tratamento por meio de um paquímetro digital, utilizando-se como medida a distância da borda incisal até a porção mais côncava da margem gengival dos incisivos e caninos inferiores. Os dados foram analisados por meio do teste t de Student e teste t pareado. Dentre os seis dentes ântero-inferiores, todos apresentaram aumento significante no grupo tratado, e apenas três dentes (33,42 e 43) apresentaram aumento significante no grupo controle. Já em relação ao grupo tratado e o grupo controle em T2, houve um aumento significante da coroa nos dentes 32, 33 e 43. Houve um aumento estatisticamente significante em apenas dois dentes (31 e 41) em ambos os sexos. Os resultados não demonstraram relevância estatística quando comparados com a alteração do tamanho da coroa no decorrer da idade. Conclui-se que as medidas das coroas clínicas dos dentes diferiram entre os grupos, sendo maior no grupo tratado. O aumento da coroa clinica dos dentes, não esta relacionado somente pela presença de inclinação para vestibular dos mesmo, mas pode ser considerado como multifatorial.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

One of the main problems related to the use of diesel as fuel is the presence of sulfur (S) which causes environmental pollution and corrosion of engines. In order to minimize the consequences of the release of this pollutant, Brazilian law established maximum sulfur content that diesel fuel may have. To meet these requirements, diesel with a maximum sulfur concentration equal to 10 mg/kg (S10) has been widely marketed in the country. However, the reduction of sulfur can lead to changes in the physicochemical properties of the fuel, which are essential for the performance of road vehicles. This work aims to identify the main changes in the physicochemical properties of diesel fuel and how they are related to reduction of sulfur content. Samples of diesel types S10, S500 and S1800 were tested according with the methods of the American Society for Testing and Materials (ASTM). The fuels were also characterized by thermogravimetric analysis (TG) and subjected to physical distillation (ASTM D86) and simulated distillation gas chromatography (ASTM D2887). The results showed that the reduction of sulfur turned the fuel lighter and fluid, allowing a greater applicability to low temperature environments and safer for transportation and storage. Through the simulated distillation data was observed that decreasing sulfur content resulted in higher initial boiling point temperatures and the decreasing of the boiling temperature of the medium and heavy fractions. Thermogravimetric analysis showed a loss event mass attributed to volatilization or distillation of light and medium hydrocarbons. Based on these data, the kinetic behavior of the samples was investigated and it was observed that the activation energies (Ea) did not show significant changes throughout conversion. Considering the average of these energies, the S1800 had the highest Ea during the conversion and the S10 the lowest values

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Introduction: Several modifications are identified as aging, causing more or less limitation imposed by over the years. Among these, one can highlight the different degrees of cognitive decline, particularly memory that can involve the daily activities and the subject functionality. Studies have shown an association between levels of serum cortisol and stress imposed by the exercise on this. However, there are few studies that references the performance on cognitive aspects of declarative memory and cortisol on the exercise in the water with automatic and práxicos movements and moderate. Objective: Check the effect based on the acute physical exercise and práxicos automatic movements on the performance of visual declarative memory and in serum cortisol in subjects aged between 51 and 74 years. Materials and Methods: It builds a survey characterized as cross with a first sample of 32 physically active subjects aged between 51 and 74 years, divided into two exercise groups (March of Automatic Group - MAG and the March of Praxis Group - MPG). We used a probabilistic and random sampling for sample selection. Used the MMSE (Mini Mental State Examination) to check the general cognitive status, visual acuity test - optotypes chart "E" Rasquin and was even used the declarative visual memory test proposed by Nitrini and collaborators (1994), applying before motor stimulation and immediately after, and the day of blood collection with 2 ml for analysis of cortisol hormone. The normality and homogeneity were verified from the Shapiro-Wilk and Levene tests. Thus we adopted a descriptive statistics to characterize the sample. The Split-Plot ANOVA was used along with the paired t-test to verify the identified differences. We adopted a significance level of p <0.05. Results: It was observed that the groups (MAG and MPG) and the anthropometric variables, perceived exertion, education, cognitive assessment and visual acuity showed no significant differences (p > 0.05), showing that the groups are homogeneous, with variables and similar means. After the stimulation session, lasting 30 min, it was observed that the amount of hits for Δ of declarative memory questionnaire visual images increased, presenting significant for both groups (MAG, p < 0.001; MPG, p = 0.042). The same was observed for cortisol concentration with a reduction in the levels immediately after the stimulus (MAG and MPG, p < 0.001). Conclusion: The results showed that the exercises proposed in its acute effect provide significantly memories of gains and also showed a reduction in cortisol levels.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Considering the plant biodiversity in the Brazilian Northeast, whose components can be inserted into sustainable production systems, the jujube (Ziziphus joazeiro Mart.) emerges as to recovery of its fruit. The present study has as objective to characterize the fruit of the jujube under the physical, physicochemical and chemical approach and assess its conservation by spontaneous lactic fermentation under the influence of chloride, sodium, calcium and potassium. According to the legislation, vegetable acidified by fermentation that is subjected to lactic acid fermentation in order to achieve a final product pH less than or equal to 4.5. The results of the physical, chemical and physico-chemistry of ripe fruit jujube showed the potential of this species for agro-processing. The yield of edible portion (91.83%), soluble solids content (18,98º Brix), titratable acidity (0.14% citric acid), pH (5.30) and its composition, divided in moisture (79.01%), protein (2.01%), lipids (0.52%), carbohydrate (17.59%), fiber, ash (0.76%) and its minerals were consistent with the characteristic profile fruits, thus favoring the development of spontaneous lactic fermentation. The minimum pH and titratable acidity observed maximum in the fermentation process under the influence of mixtures of salts (NaCl and KCl NaCl2) values ranged from 3.4 to 3.7 and from 0.54 to 0.95 (% lactic acid), respectively. The profile of the lactic fermentation of fruit of jujube in brine, fermented microbiological quality and the result of analysis of primary sensory prepared preserved, the application of endorsed by the consumer sensory evaluation, more particularly, derived from fermented fruit preserved in the presence of chloride sodium, in accordance with the traditional techniques of lactic fermentation of vegetables. The results of sensory evaluation conducted with 100 consumers (tasters) revealed an acceptance rate equal to 78% of the preserve. Despite restrictions on the sensory acceptability of fermented under the influence of salts (KCl and CaCl2) substitutes sodium chloride, preserved these perspectives presented to balance the optimization of mixtures, health product safety and consumer awareness towards prefer a more healthy product with reduced sodium content.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This study analyzed the Worker’s Healthy Eating Program in Rio Grande do Norte state (RN) to assess its possible impact on the nutritional status of the workers benefitted. To that end, we conducted a cross-sectional observational prospective study based on a multistage stratified random sample comparing 26 small and medium-sized companies from the Manufacturing Sector (textiles, food and beverages, and nonmetallic minerals) of RN, divided into two equal groups (WFP and Non WFP). Interviews were conducted at each company by trained interviewers from Tuesday to Saturday between September and December 2014. Data were collected on the company (characterization and information regarding the program’s desired results) and workers (personal and professional information, anthropometrics, health, lifestyle and food consumed the previous day). Population estimates were calculated for RN on the characteristics of workers and the study variables. The main variable was BMI. The secondary variables were waist circumference (WC), nutritional diagnosis, calorie intake, blood pressure, metabolic variables and lifestyle indicators. The statistical method used was hierarchical mixed effects linear regression for interval variables and hierarchical mixed effects logistic regression for binary variables. The variables measured in ordinal scales were analyzed by ordinal logistic regression adjusted for correlated variables, adopting robust standard errors. The results for interval variables are presented as point estimates and their 95% confidence intervals; and as odds-ratios and their 95% confidence intervals for binary variables. The Fisher’s exact and Student’s t-tests were used for simple comparisons between proportions and means, respectively. Differences were considered statistically significant at p<0.05. A total of 1069 workers were interviewed, of which 541 were from the WFP group and 528 from the Non WFP group. Subjects were predominantly males and average age was 34.5 years. Significant intergroup differences were observed for schooling level, income above 1 MW (minimum wage) and specific training for their position at the company. The results indicated a significant difference between the BMI of workers benefitted, which was on average 0.989 kg/m2 higher than the BMI of workers from the Non WFP group (p=0.002); and between the WC, with the waist circumference of WFP group workers an average of 1.528 cm larger (p<0.05). Higher prevalence of overweight and obesity (p<0.001) and cardiovascular risk (p=0.038) were recorded in the WFP group. Tests on the possible effect of the WFP on health (blood pressure and metabolic indicators) and lifestyle indicators (smoking, alcohol consumption and exercise) were not significant. With respect to worker’s diets, differences were significant for consumption of saturated fat (lunch and daily intake), salt (lunch, other meals and daily intake) and proteins (other meals and daily intake), with higher consumption of these nutrients in the WFP group. The study showed a possible positive impact of the WFP on nutritional status (BMI and WC) among the workers benefitted. No possible effects of the program were observed for the lifestyle indicators studied. Workers benefitted consumed less salt, saturated fat and protein. The relevance of the WFP is recognized for this portion of society and it is understood that, if the program can reach and impact those involved, the development of educational initiatives aimed at nutritional and food safety may also exert a positive influence.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Diesel fuel is one of leading petroleum products marketed in Brazil, and has its quality monitored by specialized laboratories linked to the National Agency of Petroleum, Natural Gas and Biofuels - ANP. The main trial evaluating physicochemical properties of diesel are listed in the resolutions ANP Nº 65 of December 9th, 2011 and Nº 45 of December 20th, 2012 that determine the specification limits for each parameter and methodologies of analysis that should be adopted. However the methods used although quite consolidated, require dedicated equipment with high cost of acquisition and maintenance, as well as technical expertise for completion of these trials. Studies for development of more rapid alternative methods and lower cost have been the focus of many researchers. In this same perspective, this work conducted an assessment of the applicability of existing specialized literature on mathematical equations and artificial neural networks (ANN) for the determination of parameters of specification diesel fuel. 162 samples of diesel with a maximum sulfur content of 50, 500 and 1800 ppm, which were analyzed in a specialized laboratory using ASTM methods recommended by the ANP, with a total of 810 trials were used for this study. Experimental results atmospheric distillation (ASTM D86), and density (ASTM D4052) of diesel samples were used as basic input variables to the equations evaluated. The RNAs were applied to predict the flash point, cetane number and sulfur content (S50, S500, S1800), in which were tested network architectures feed-forward backpropagation and generalized regression varying the parameters of the matrix input in order to determine the set of variables and the best type of network for the prediction of variables of interest. The results obtained by the equations and RNAs were compared with experimental results using the nonparametric Wilcoxon test and Student's t test, at a significance level of 5%, as well as the coefficient of determination and percentage error, an error which was obtained 27, 61% for the flash point using a specific equation. The cetane number was obtained by three equations, and both showed good correlation coefficients, especially equation based on aniline point, with the lowest error of 0,816%. ANNs for predicting the flash point and the index cetane showed quite superior results to those observed with the mathematical equations, respectively, with errors of 2,55% and 0,23%. Among the samples with different sulfur contents, the RNAs were better able to predict the S1800 with error of 1,557%. Generally, networks of the type feedforward proved superior to generalized regression.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This study aimed to analyze the pattern characteristics of sleep and sleep quality of nurses who worked day and night shifts. This is a study with a quantitative approach, cross-sectional, descriptive. The study was conducted at the University Hospital of Rio Grande do Norte. Data were collected in full in the period from January to September 2015, through the instruments: Pittsburgh Sleep Quality Index and Sleep Diary. Subjects were interviewed according to their work shift, day or night, during the working hours of the nursing team. After being coded and tabulated, data were analyzed using SPSS version 20.0. The study was approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, in the Opinion No. 751 567. For a description of continuous variables were used position measurements (mean and median), dispersion (standard deviation) and correlation (Spearman correlation test), to a 0.05 significance level. The socio-demographic profile of the sample showed a total of n = 104 participants, distributed in: 64 on day shift and night shift 40; wherein 90.4% are female, aged between 24-45 years, corresponding to 73% of the sample. There was the presence of statistically significant differences for the variables: employment and living habits (inpatient and outpatient sector (p = 0.003), have more than one job (p = 0.002), use cordial (p = 0.021); Sleep pattern: nap time (p = 0.003), sleep latency (p = 0.013), total sleep time (p = 0.001), how it felt to wake up (p = 0.017), quality of nighttime sleep (p = 0.001) and sleep quality (p = 0.007) compared between the day shift and the night shift. It was concluded that shift work has changed the pattern and sleep quality of nurses working day and night shifts.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This study aimed to analyze the pattern characteristics of sleep and sleep quality of nurses who worked day and night shifts. This is a study with a quantitative approach, cross-sectional, descriptive. The study was conducted at the University Hospital of Rio Grande do Norte. Data were collected in full in the period from January to September 2015, through the instruments: Pittsburgh Sleep Quality Index and Sleep Diary. Subjects were interviewed according to their work shift, day or night, during the working hours of the nursing team. After being coded and tabulated, data were analyzed using SPSS version 20.0. The study was approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, in the Opinion No. 751 567. For a description of continuous variables were used position measurements (mean and median), dispersion (standard deviation) and correlation (Spearman correlation test), to a 0.05 significance level. The socio-demographic profile of the sample showed a total of n = 104 participants, distributed in: 64 on day shift and night shift 40; wherein 90.4% are female, aged between 24-45 years, corresponding to 73% of the sample. There was the presence of statistically significant differences for the variables: employment and living habits (inpatient and outpatient sector (p = 0.003), have more than one job (p = 0.002), use cordial (p = 0.021); Sleep pattern: nap time (p = 0.003), sleep latency (p = 0.013), total sleep time (p = 0.001), how it felt to wake up (p = 0.017), quality of nighttime sleep (p = 0.001) and sleep quality (p = 0.007) compared between the day shift and the night shift. It was concluded that shift work has changed the pattern and sleep quality of nurses working day and night shifts.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Brazil is among the largest cashew nut producers of the world. However, the roasting process is still carried out artisanally, especially in the Brazilian semiarid region. In face of this occupational problem, the aim of this study was to perform a physical-chemical characterization of the particulate matter (PM) emitted by the roasting of cashew nuts, as well as to determine the occupational risk and molecular mechanisms associated. The most evident PM characteristics were the prevalence of fine particles, typical biomass burning morphologies such as tar ball and the presence of the elements K, Cl, S, Ca and Fe. In addition, atmospheric modeling analyses suggest that these particles can reach neighboring regions of the emission source. Polycyclic aromatic hydrocarbons (PAHs) with carcinogenic potential, such as benzo[a]pyrene, dibenz[a,h]anthracene, benzo[a]anthracene, benzo[b]fluoranthene, chrysene, benzo[k]fluoranthene, indeno[1,2,3-c,d]pyrene and benzo[j]fluoranthene were the most abundant PAHs found in the two air monitoring campaigns. Among the identified oxy-PAH the benzanthrone (7H-benz[d,e]anthracen-7-one) had the highest concentration and the evaluation of lifetime cancer risk showed an increase of 12 to 37 cases of cancer for every 10,000 exposed people. Chemical analysis of roasted cashew nuts identified the PAHs: phenanthrene, benzo[g,h,i]perylene, pyrene and benzo[a]pyrene, besides the 3-pentadecilfenol allergen (urushiol analogue) as prevalent. Occupational exposure to PAHs was confirmed by the increase of urinary 1-hydroxypyrene levels and genotoxic effects were evidenced by the increase on micronuclei and nuclear bud frequency in exfoliated buccal mucosa cells among the exposed workers. Other biomarkers of effects such as karyorrhexis, pyknotic, karyolytic, condensed chromatin and binucleated cells also have their frequencies increased when compared to an unexposed control group. The investigation of the molecular mechanisms associated with the PM organic extract showed cytotoxicity in human lung cell lines (A549) at concentrations ≥ 4 nM BaPeq. Using non-cytotoxic doses the extract was able to activate proteins involved in the DNA damage response pathway (Chk1 and p53). Moreover, the specific contribution of the four most representative PAHs in the cashew nut roasting sample showed that benzo[a]pyrene was the most efficient to activate Chk1 and p53. Finally, the organic extract was able to increase persistently the mRNA expression involved in the PAHs metabolism (CYP1A1 and CYP1B1), inflammatory response (IL-8 and TNF-α) and cell cycle arrest (CDKN1A) for DNA repair (DDB2). The high PM concentrations and its biological effects associated warn of the serious harmful effects of artisanal cashew nut roasting and urgent actions should be taken to the sustainable development of this activity.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Brazil is among the largest cashew nut producers of the world. However, the roasting process is still carried out artisanally, especially in the Brazilian semiarid region. In face of this occupational problem, the aim of this study was to perform a physical-chemical characterization of the particulate matter (PM) emitted by the roasting of cashew nuts, as well as to determine the occupational risk and molecular mechanisms associated. The most evident PM characteristics were the prevalence of fine particles, typical biomass burning morphologies such as tar ball and the presence of the elements K, Cl, S, Ca and Fe. In addition, atmospheric modeling analyses suggest that these particles can reach neighboring regions of the emission source. Polycyclic aromatic hydrocarbons (PAHs) with carcinogenic potential, such as benzo[a]pyrene, dibenz[a,h]anthracene, benzo[a]anthracene, benzo[b]fluoranthene, chrysene, benzo[k]fluoranthene, indeno[1,2,3-c,d]pyrene and benzo[j]fluoranthene were the most abundant PAHs found in the two air monitoring campaigns. Among the identified oxy-PAH the benzanthrone (7H-benz[d,e]anthracen-7-one) had the highest concentration and the evaluation of lifetime cancer risk showed an increase of 12 to 37 cases of cancer for every 10,000 exposed people. Chemical analysis of roasted cashew nuts identified the PAHs: phenanthrene, benzo[g,h,i]perylene, pyrene and benzo[a]pyrene, besides the 3-pentadecilfenol allergen (urushiol analogue) as prevalent. Occupational exposure to PAHs was confirmed by the increase of urinary 1-hydroxypyrene levels and genotoxic effects were evidenced by the increase on micronuclei and nuclear bud frequency in exfoliated buccal mucosa cells among the exposed workers. Other biomarkers of effects such as karyorrhexis, pyknotic, karyolytic, condensed chromatin and binucleated cells also have their frequencies increased when compared to an unexposed control group. The investigation of the molecular mechanisms associated with the PM organic extract showed cytotoxicity in human lung cell lines (A549) at concentrations ≥ 4 nM BaPeq. Using non-cytotoxic doses the extract was able to activate proteins involved in the DNA damage response pathway (Chk1 and p53). Moreover, the specific contribution of the four most representative PAHs in the cashew nut roasting sample showed that benzo[a]pyrene was the most efficient to activate Chk1 and p53. Finally, the organic extract was able to increase persistently the mRNA expression involved in the PAHs metabolism (CYP1A1 and CYP1B1), inflammatory response (IL-8 and TNF-α) and cell cycle arrest (CDKN1A) for DNA repair (DDB2). The high PM concentrations and its biological effects associated warn of the serious harmful effects of artisanal cashew nut roasting and urgent actions should be taken to the sustainable development of this activity.