Infra-estrutura de software baseada em standards de apoio à eficiência energética utilizando fontes de energia renovável

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

ZoomAzores project: implementation of a WebGIS for Nature and Adventure Tourism.

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Desenvolvimento de uma infra-estrutura de software para suportar conceitos de eficiência energética usando sistemas móveis pró-activos

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Análise paramétrica e optimização estrutural utilizando o software comercial ANSYS

Dissertação para obtenção do Grau de Mestre em Engenharia Civil

Interfaces Cérebro-Computador Utilização do Emotiv EPOC para controlar software lúdico

Uma interface cérebro-computador (BCI) não é mais do que um dispositivo que lê e analisa ondas cerebrais e as converte em ações sobre um computador. Com a evolução das BCI e a possibilidade de acesso às mesmas por parte do público começou a ser possível o uso de BCIs para fins lúdicos. Nesse sentido nesta tese foi feito um estudo sobre interfaces cérebro-computador, o que são, que tipos de BCI existem, o seu uso para entretenimento, as suas limitações e o futuro deste tipo de interfaces. Foi ainda criado um software lúdico controlado por BCI (Emotiv EPOC) que é composto por um jogo tipo Pong e um reprodutor de música. O reprodutor de música através de BCI classifica e recomenda músicas ao utilizador. Com esta tese foi possível chegar à conclusão que é possível utilizar BCI para entretenimento (jogos e recomendação de conteúdos) apesar de se ter verificado que para jogos os dispositivos tradicionais de controlo (rato e teclado) ainda têm uma precisão muito superior.

O uso do software winplot na aprendizagem matemática em sala de aula: uma inovação pedagógica?

Esse trabalho tem como objetivo de pesquisar o uso do software Winplot nas aulas de matemática como instrumento auxiliar e fator de ruptura das práticas pedagógicas fundamentadas no paradigma fabril, criando ambientes favoráveis ao ensino e aprendizagem, dando maior ênfase a aprendizagem, proporcionando aos educandos serem construtores dos seus próprios conhecimentos, valorizando os seus significados, propiciando a formação de cidadãos críticos e autônomos e educadores como mediadores nesse processo. Para a realização desse trabalho de pesquisa foi adotada a metodologia qualitativa com fundamentos etnográficos, a observação participante e a utilização do diário de bordo eletrônico etnográfico que nos garantiu agilidade nos registros de campo, propiciando a descrição das ações reais de educador e educandos em função do uso desse software que assegurou o desejo dos educandos, educador e pesquisador nas mudanças das praxes pedagógicas que valorizam o educando como centro no processo de ensino e aprendizagem contribuindo para que a escola seja estimulada a adotar um currículo flexível propiciando uma educação contextualizada.

Software de gestão de manutenção como ferramenta de apoio à melhoria da eficiência da gestão de infraestruturas

Este trabalho académico surge no âmbito da realização da dissertação do Mestrado em Engenharia e Gestão Industrial. Tem como objetivo a melhoria da gestão do Departamento de Infraestruturas, numa empresa de produção de motores elétricos para a indústria automóvel, através da análise, implementação e melhoria de um software de gestão de manutenção, de forma a aumentar a eficiência do Departamento. Este estudo foi desenvolvido durante um estágio curricular na empresa Globe Motors Portugal Lda, localizada em Vila do Conde. Para sua sustentação, foi efetuada uma análise funcional, suportada por um Software de gestão de manutenção, de forma a perceber qual a importância que o mesmo tem no funcionamento do Departamento de Infraestruturas. Pretendeu-se compreender quais as vantagens e desvantagens da sua utilização. Posteriormente, implementou-se uma nova versão deste software, analisando-se os pontos fortes e as oportunidades de melhoria, de forma a tornar o Departamento de infraestruturas mais eficiente, através da utilização desta renovada ferramenta de trabalho. Como objetivo último, pretendeu-se à melhoria da organização e gestão do Departamento de infraestruturas, contribuindo para um desenvolvimento de toda a empresa, uma vez que comungamos a ideia de que só é possível ser competitivo, num mercado altamente exigente, através de processos eficientes, possibilitando a redução de custos a todos os níveis.

Disposable immunosensor using a simple method for oriented antibody immobilization for label-free real-time detection of an oxidative stress biomarker implicated in cancer diseases

This work proposes a novel approach for a suitable orientation of antibodies (Ab) on an immunosensing platform, applied here to the determination of 8-hydroxy-2′-deoxyguanosine (8OHdG), a biomarker of oxidative stress that has been associated to chronic diseases, such as cancer. The anti-8OHdG was bound to an amine modified gold support through its Fc region after activation of its carboxylic functions. Non-oriented approaches of Ab binding to the platform were tested in parallel, in order to show that the presented methodology favored Ab/Ag affinity and immunodetection of the antigen. The immunosensor design was evaluated by quartz-crystal microbalance with dissipation, atomic force microscopy, electrochemical impedance spectroscopy (EIS) and square-wave voltammetry. EIS was also a suitable technique to follow the analytical behavior of the device against 8OHdG. The affinity binding between 8OHdG and the antibody immobilized in the gold modified platform increased the charge transfer resistance across the electrochemical set-up. The observed behavior was linear from 0.02 to 7.0 ng/mL of 8OHdG concentrations. The interference from glucose, urea and creatinine was found negligible. An attempt of application to synthetic samples was also successfully conducted. Overall, the presented approach enabled the production of suitably oriented Abs over a gold platform by means of a much simpler process than other oriented-Ab binding approaches described in the literature, as far as we know, and was successful in terms of analytical features and sample application.

Chitosan/AuNPs Modified Graphene Electrochemical Sensor for Label-Free Human Chorionic Gonadotropin Detection

A new immunosensor is presented for human chorionic gonadotropin (hCG), made by electrodepositing chitosan/gold-nanoparticles over graphene screen-printed electrode (SPE). The antibody was covalently bound to CS via its Fc-terminal. The assembly was controlled by electrochemical Impedance Spectroscopy (EIS) and followed by Fourier Transformed Infrared (FTIR). The hCG-immunosensor displayed linear response against the logarithm-hCG concentration for 0.1–25 ng/mL with limit of detection of 0.016 ng/mL. High selectivity was observed in blank urine and successful detection of hCG was also achieved in spiked samples of real urine from pregnant woman. The immunosensor showed good detection capability, simplicity of fabrication, low-cost, high sensitivity and selectivity.

Disposable immunosensor with simple antibody orientation for label-free real-time detection of a cancer biomarker

This work proposes a novel approach for a suitable orientation of antibodies (Ab) on an immunosensing platform, applied here to the determination of 8-hydroxy-2’-deoxyguanosine (8OHdG), a biomarker of oxidative stress that has been associated to chronic diseases, such as cancer. The Anti-8OHdG was bound to an amine modified gold support through its Fc region after activation of its carboxylic functions. Non-oriented approaches of Ab binding to the platform were tested in parallel, in order to show that the presented proposal favored Ab/Ag affinity. The immunosensor design was evaluated by Quartz-Crystal microbalance with Dissipation, Atomic Force Microscopy, Electrochemical Impedance Spectroscopy (EIS) and Square-Wave Voltammetry. EIS was also a suitable technique to follow the analytical behavior of the device against 8OHdG. The affinity binding between 8OHdG and the antibody immobilized in the gold modified platform increased the charged transfer resistance across the electrochemical sep-up. The observed behavior was linear from 0.02 to 7.0 ng/mL of 8OHdG concentrations. The interference from Glucose, Urea and Creatinine was found negligible. An attempt of application to synthetic samples was also successfully conducted. Overall, the presented approach enabled the production of suitably oriented Abs over a gold platform by means of a much simpler process than other oriented-Ab binding approaches described in the literature, as far as we know, and was successful in terms of analytical features and sample application.

Label-free human chorionic gonadotropin detection at picogram levels using oriented antibodies bound to graphene screen-printed electrodes

Human chorionic gonadotropin (hCG) is a key diagnostic marker of pregnancy and an important biomarker for cancers in the prostate, ovaries and bladder and therefore of great importance in diagnosis. For this purpose, a new immunosensor of screen-printed electrodes (SPEs) is presented here. The device was fabricated by introducing a polyaniline (PANI) conductive layer, via in situ electropolymerization of aniline, onto a screen-printed graphene support. The PANI-coated graphene acts as the working electrode of a three terminal electrochemical sensor. The working electrode is functionalised with anti-hCG, by means of a simple process that enabled oriented antibody binding to the PANI layer. The antibody was attached to PANI following activation of the –COOH group at the Fc terminal. Functionalisation of the electrode was analysed and optimized using Electrochemical Impedance Spectroscopy (EIS). Chemical modification of the surface was characterised using Fourier transform infrared, and Raman spectroscopy with confocal microscopy. The graphene–SPE–PANI devices displayed linear responses to hCG in EIS assays from 0.001 to 50 ng mL−1 in real urine, with a detection limit of 0.286 pg mL−1. High selectivity was observed with respect to the presence of the constituent components of urine (urea, creatinine, magnesium chloride, calcium chloride, sodium dihydrogen phosphate, ammonium chloride, potassium sulphate and sodium chloride) at their normal levels, with a negligible sensor response to these chemicals. Successful detection of hCG was also achieved in spiked samples of real urine from a pregnant woman. The immunosensor developed is a promising tool for point-of-care detection of hCG, due to its excellent detection capability, simplicity of fabrication, low-cost, high sensitivity and selectivity.

Specific label-free and real-time detection of oxidized low density lipoprotein (oxLDL) using an immunosensor with three monoclonal antibodies

Increased levels of plasma oxLDL, which is the oxidized fraction of Low Density Lipoprotein (LDL), are associated with atherosclerosis, an inflammatory disease, and the subsequent development of severe cardiovascular diseases that are today a major cause of death in modern countries. It is therefore important to find a reliable and fast assay to determine oxLDL in serum. A new immunosensor employing three monoclonal antibodies (mAbs) against oxLDL is proposed in this work as a quick and effective way to monitor oxLDL. The oxLDL was first employed to produce anti-oxLDL monoclonal antibodies by hybridoma cells that were previously obtained. The immunosensor was set-up by selfassembling cysteamine (Cyst) on a gold (Au) layer (4 mm diameter) of a disposable screen-printed electrode. Three mAbs were allowed to react with N-hydroxysuccinimide (NHS) and ethyl(dimethylaminopropyl)carbodiimide (EDAC), and subsequently incubated in the Au/Cys. Albumin from bovine serum (BSA) was immobilized further to ensure that other molecules apart from oxLDL could not bind to the electrode surface. All steps were followed by various characterization techniques such as electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SWV). The analytical operation of the immunosensor was obtained by incubating the sensing layer of the device in oxLDL for 15 minutes, prior to EIS and SWV. This was done by using standard oxLDL solutions prepared in foetal calf serum, in order to simulate patient's plasma with circulating oxLDL. A sensitive response was observed from 0.5 to 18.0 mg mL 1 . The device was successfully applied to determine the oxLDL fraction in real serum, without prior dilution or necessary chemical treatment. The use of multiple monoclonal antibodies on a biosensing platform seemed to be a successful approach to produce a specific response towards a complex multi-analyte target, correlating well with the level of oxLDL within atherosclerosis disease, in a simple, fast and cheap way.

A label-free DNA aptamer-based impedance biosensor for the detection of E. coli outer membrane proteins

A label-free DNA aptamer-based impedance biosensor for the detection of E. coli outer membrane proteins (OMPs) was developed. Two single stranded DNA sequences were tested as recognition elements and compared. The aptamer capture probes were immobilized, with and without 6-mercapto-1-hexanol (MCH) on a gold electrode. Each step of the modification process was characterized by Faradaic impedance spectroscopy (FIS). A linear relationship between the electron-transfer resistance (Ret) and E. coli OMPs concentration was demonstrated in a dynamic detection range of 1 × 10−7–2 × 10−6 M. Moreover, the aptasensor showed selectivity despite the presence of other possible water contaminates and could be regenerated under low pH condition. The developed biosensor shows great potential to be incorporated in a biochip and used for in situ detection of E. coli OMPs in water samples.