Engineering of metal oxide nanoparticles for application in electrochemical devices

The growing demand for materials and devices with new functionalities led to the increased inter-est in the field of nanomaterials and nanotechnologies. Nanoparticles, not only present a reduced size as well as high reactivity, which allows the development of electronic and electrochemical devices with exclusive properties, when compared with thin films. This dissertation aims to explore the development of several nanostructured metal oxides by sol-vothermal synthesis and its application in different electrochemical devices. Within this broad theme, this study has a specific number of objectives: a) research of the influence of the synthesis parameters to the structure and morphology of the nanoparticles; b) improvement of the perfor-mance of the electrochromic devices with the application of the nanoparticles as electrode; c) application of the nanoparticles as probes to sensing devices; and d) production of solution-pro-cessed transistors with a nanostructured metal oxide semiconductor. Regarding the results, several conclusions can be exposed. Solvothermal synthesis shows to be a very versatile method to control the growth and morphology of the nanoparticles. The electrochromic device performance is influenced by the different structures and morphologies of WO3 nanoparticles, mainly due to the surface area and conductivity of the materials. The dep-osition of the electrochromic layer by inkjet printing allows the patterning of the electrodes without wasting material and without any additional steps. Nanostructured WO3 probes were produced by electrodeposition and drop casting and applied as pH sensor and biosensor, respectively. The good performance and sensitivity of the devices is explained by the high number of electrochemical reactions occurring at the surface of the na-noparticles. GIZO nanoparticles were deposited by spin coating and used in electrolyte-gated transistors, which promotes a good interface between the semiconductor and the dielectric. The produced transistors work at low potential and with improved ON-OFF current ratio, up to 6 orders of mag-nitude. To summarize, the low temperatures used in the production of the devices are compatible with flexible substrates and additionally, the low cost of the techniques involved can be adapted for disposable devices.

Cross sectional default probabilities in european corporate bonds

This study attempts to identify basis-trading opportunities in the European banking sector by comparing two different measures for the market’s assessment of risk: market-observed CDS spreads and model-implied Z-spreads. Using a sample of 10 banks, over a period of 3 years following the European banking crisis, it can be concluded that there were arbitrage opportunities in the sector, as evidenced by the derived negative bases.

Unravelling the role of alpha 2,6 sialic acid on mouse dentritic cells functions

RESUMO: As células dendríticas (CDs) são fundamentais na imunomodulação e iniciação de respostas imunes adaptativas, enquanto os ácidos siálicos (Sias) são potenciais imunomoduladores. Estas células expressam níveis elevados da sialiltransferase ST6Gal-1, que transfere Sias para a posição terminal de oligossacáridos. De facto, a maturação de CDs está associada a uma diminuição da sialilação na sua superfície celular. Apesar de ter função biológica desconhecida, a forma solúvel, extracelular de ST6Gal-1 aumenta em cancros e inflamação. Ainda assim, esta foi recentemente identificada como moduladora da hematopoiese. Considerando o importante papel das CDs na iniciação de respostas anticancerígenas, uma ligação entre a sialilação extrínseca induzida por ST6Gal-1 extracelular e o seu papel na modulação de CDs deve ser identificada. Neste trabalho hipotetizou-se que a sialilação α2,6 extrínseca de CDs diminui o seu perfil de maturação mediante ativação por lipopolissacarídeo (LPS). O objetivo principal foi sialilar extrinsecamente em α2,6 CDs da medula óssea de murganhos, avaliando os seus perfis de maturação e de libertação de citocinas, após estimulação com LPS (por Citometria de Fluxo e ELISA, respetivamente). Ao contrário da hipótese, o perfil celular não foi modulado, usando várias abordagens. Por outro lado, a consequência da falta de α2,6 Sias na maturação de CDs foi avaliada analisando: 1) CDs da medula óssea de murganhos tratadas com sialidase, 2) CDs da medula óssea e 3) CDs das vias aéreas, ambas de murganhos deficientes em ST6Gal-1, comparando com a estirpe selvagem. Estes resultados sugerem que a perta total de α2,6 Sias se relaciona com o aumento da expressão do complexo de histocompatibilidade principal de classe II. Apesar de controverso, é provável existirem mecanismos inerentes à ativação por LPS, reduzindo a eficácia de ST6Gal-1 extracelular. Por outro lado, a modificação no perfil de CDs de murganhos deficientes em ST6Gal-1 poderá relacionar-se com uma predisposição para um estado inflamatório severo. Com isto, o trabalho desenvolvido abriu futuras linhas de investigação, nomeadamente explorar outros fatores envolvidos na (de)sialilação α2,6 de CDs, podendo ter impacto em imunoterapia com uso de CDs.--------------------------ABSTRACT: Dendritic cells (DCs) are vital for immunomodulation and the initiation of adaptive immune responses, whereas sialic acids (Sias) are potential immunomodulators. These cells express high levels of sialyltransferase ST6Gal-1, responsible for transferring Sias to the terminal position of oligosaccharide chains. Indeed, DCs’ maturation is associated with decreased cell surface sialylation. Although its biological significance is unknown, the soluble, extracellular form of ST6Gal-1 increases in cancers and inflammation. However, extracellular ST6Gal-1 was recently identified as modulator of hematopoiesis. Considering that DCs play a crucial role in the initiation of a productive anti-cancer immune response, a link between extrinsic sialylation by the extracellular ST6Gal-1 on DC function needs to be investigated. We hypothesize that extrinsic α2,6 sialylation of DCs diminishes their maturation features upon lipopolysaccharide (LPS) stimulation. The main goal was to extrinsically α2,6 sialylate mice bone marrow derived DCs (BMDCs) and to evaluate their maturation and cytokine profiles upon LPS stimulation (by Flow Cytometry and ELISA, respectively). Unlike the hypothesis, we observed that BMDCs’ profile is not modulated, even using several approaches. In contrast, the consequence of lacking cell surface α2,6 Sias in DC maturation was assessed by analysing: 1) sialidase treated BMDCs, 2) BMDCs from mice lacking ST6Gal-1 and 3) DCs from mice airways, comparing wild type with ST6Gal-1 knockout mice. These results suggest that overall lack in α2,6 Sias is related with increased expression of major histocompatibility class II (MHC-II). Although appearing to be controversial findings, other intracellular mechanisms might be occurring upon LPS-induced BMDC activation, probably reducing extracellular ST6Gal-1 effect. In opposite, the modification observed in DC profile of ST6Gal-1 knockout mice might be related to its predisposition to a more severe inflammatory status. With this, the developed work opened future lines of investigation, namely exploring other factors involved in α2,6 (de)sialylation of DC, which might have influence in immunotherapy using DCs.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Analysis and design of sinusoidal quadrature RC-oscillators

Modern telecommunication equipment requires components that operate in many different frequency bands and support multiple communication standards, to cope with the growing demand for higher data rate. Also, a growing number of standards are adopting the use of spectrum efficient digital modulations, such as quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexing (OFDM). These modulation schemes require accurate quadrature oscillators, which makes the quadrature oscillator a key block in modern radio frequency (RF) transceivers. The wide tuning range characteristics of inductorless quadrature oscillators make them natural candidates, despite their higher phase noise, in comparison with LC-oscillators. This thesis presents a detailed study of inductorless sinusoidal quadrature oscillators. Three quadrature oscillators are investigated: the active coupling RC-oscillator, the novel capacitive coupling RCoscillator, and the two-integrator oscillator. The thesis includes a detailed analysis of the Van der Pol oscillator (VDPO). This is used as a base model oscillator for the analysis of the coupled oscillators. Hence, the three oscillators are approximated by the VDPO. From the nonlinear Van der Pol equations, the oscillators’ key parameters are obtained. It is analysed first the case without component mismatches and then the case with mismatches. The research is focused on determining the impact of the components’ mismatches on the oscillator key parameters: frequency, amplitude-, and quadrature-errors. Furthermore, the minimization of the errors by adjusting the circuit parameters is addressed. A novel quadrature RC-oscillator using capacitive coupling is proposed. The advantages of using the capacitive coupling are that it is noiseless, requires a small area, and has low power dissipation. The equations of the oscillation amplitude, frequency, quadrature-error, and amplitude mismatch are derived. The theoretical results are confirmed by simulation and by measurement of two prototypes fabricated in 130 nm standard complementary metal-oxide-semiconductor (CMOS) technology. The measurements reveal that the power increase due to the coupling is marginal, leading to a figure-of-merit of -154.8 dBc/Hz. These results are consistent with the noiseless feature of this coupling and are comparable to those of the best state-of-the-art RC-oscillators, in the GHz range, but with the lowest power consumption (about 9 mW). The results for the three oscillators show that the amplitude- and the quadrature-errors are proportional to the component mismatches and inversely proportional to the coupling strength. Thus, increasing the coupling strength decreases both the amplitude- and quadrature-errors. With proper coupling strength, a quadrature error below 1° and amplitude imbalance below 1% are obtained. Furthermore, the simulations show that increasing the coupling strength reduces the phase noise. Hence, there is no trade-off between phase noise and quadrature error. In the twointegrator oscillator study, it was found that the quadrature error can be eliminated by adjusting the transconductances to compensate the capacitance mismatch. However, to obtain outputs in perfect quadrature one must allow some amplitude error.

Development of paper transistor with memory effect

This work will discuss the use of different paper membranes as both the substrate and dielectric for field-effect memory transistors. Three different nanofibrillated cellulose membranes (NFC) were used as the dielectric layer of the memory transistors (NFC), one with no additives, one with an added polymer PAE and one with added HCl. Gallium indium zinc oxide (GIZO) was used as the device’s semiconductor and gallium aluminium zinc oxide (GAZO) was used as the gate electrode. Fourier transform infrared spectroscopy (FTIR) was used to access the water content of the paper membranes before and after vacuum. It was found that the devices recovered their water too quickly for a difference to be noticeable in FTIR. The transistor’s electrical performance tests yielded a maximum ION/IOFF ratio of around 3,52x105 and a maximum subthreshold swing of 0,804 V/decade. The retention time of the dielectric charge that grants the transistor its memory capabilities was accessed by the measurement of the drain current periodically during 144 days. During this period the mean drain current did not lower, leaving the retention time of the device indeterminate. These results were compared with similar devices revealing these devices to be at the top tier of the state-of-the-art.

The role of α2,3- and α2,6-sialylation

RESUMO: Os glicoconjugados que decoram a superfície celular e os lípidos e proteínas secretados ocupam o ponto de encontro onde normalmente ocorrem interacções críticas homólogas (hospedeiro-hospedeiro) e heterólogas (hospedeiro-patogénio). Apesar de ser largamente aceite que os glicanos são parte integrante do processo de imunidade, continua a não ser claro qual o papel que os glicanos, em toda a sua diversidade, tomam no quadro geral da imunidade. Os glicanos, que são frequentemente terminados por resíduos de ácido siálico, podem ser alterados por factores externos, tais como patogénios, ou por acontecimentos fisiológicos celulares específicos. Normalmente em posição terminal, as glico-estruturas que contêm ácido siálico assumem um papel fundamental numa quantidade substancial de receptores imunes envolvidos na adesividade e tráfico celular, tal como as Selectinas e as Siglecs, das quais se sabe apresentarem uma relevante função imune. À altura do início desta tese, era sabido que os ácidos siálicos expressos à superfície das células poderiam modular mecanismos importantes nas respostas imunes adaptativas. Considerando a posição de charneira que as células dendríticas (DCs) ocupam na transição da resposta imune inata para a adaptativa, antecipámos que os ácidos siálicos poderiam também modular mecanismos relevantes nas DCs humanas. As DCs têm uma função muito relevante na verificação e captura antigénica, migração para os gânglios linfáticos e apresentação antigénica aos linfócitos, uma sequência de funções que conduz, em ultima instância, à indução da resposta inata adaptativa. Considerando estas premissas, a nossa hipótese principal foi que os ácidos siálicos podem influenciar funções relevantes das DCs, tais como captura de antigénios, maturação, migração para os gânglios linfáticos e apresentação antigénica às células Para testar esta hipótese, dividimos o trabalho em quatro partes: 1) Analisámos os glicanos sialilados de superfície, expressos durante a diferenciação de monócitos humanos em DCs (moDCs). Os nossos dados mostraram que a expressão dos glicanos com ligações em O (O-glicanos) e sialilados em α2,3, assim como glicanos com ligações em N (N-glicanos) sialilados em α2,6 e α2,3 aumentou durante o processo de diferenciação das moDCs. Contribuindo para esta nova configuração glicosídica, três sialiltransferases (STs) poderão estar envolvidas: a ST6Gal-1 correlaciona-se com a expressão aumentada de N-glicanos sialilados em α2,6; a ST3Gal-1 contribui para a sialilação em α2,3 de O-glicanos, em especial de antigénios T; e a ST3Gal-4 poderá ser responsável pelo aumento de N-glicanos sialilados em α2,3. Após estímulo e consequente maturação das moDCs, ambos os níveis de expressão génica de ST6Gal-1 e ST3Gal-4 são negativamente modificados sendo, também, que a expressão de ST3Gal-1 varia consoante o estímulo. 2) Estudámos posteriormente as consequências da modulação dos ácidos siálicos de superfície nas funções das DCs. Observámos que a remoção dos ácidos siálicos de superfície diminui significativamente a capacidade de macropinocitose e endocitose mediada por receptores nas moDCs. Em contrapartida, o tratamento com sialidase aumentou significativamente a capacidade das moDCs para fagocitar Escherichia coli. Determinou-se também que este mecanismo requer a existência de ácido siálico presente nas E. coli indicando um mecanismo de interacção hospedeiro-patogénio dependente de ácido siálico em ambas as partes envolvidas. As moDCs tratadas com sialidase também apresentam um nível superior de expressão de moléculas de MHC e moléculas co-estimulatórias, sugerindo um fenótipo celular mais maduro. Recorrendo ao modelo de ratinho, utilizaram-se DCs derivadas de células da medula (BMDCs) de ratinhos deficientes em ST3Gal-1 e ST6Gal-1. Estes ensaios revelaram que quer a endocitose quer a maturação são influenciadas por modificações 37 nos glicanos sialilados em α2,3 ou α2,6. A detecção e quantificação de proteínas Nglicosiladas e sialiladas em α2,6 apontou para um potencial envolvimento de integrinas β2 nestes mecanismos. 3) O efeito da sialilação em α2,6 na migração das DCs para os gânglios linfáticos foi também analisado. Observámos que BMDCs deficientes para ST6Gal-1 apresentam uma redução de cerca de 50% nos níveis de migração das DCs para os gânglios linfáticos, tal como aferido em ensaios de inflamação in situ e estudos de transferência adoptiva de células. Uma redução dos níveis deste tipo de migração foi também observada quando BMDCs nativas foram transferidas para ratinhos receptores deficientes em ST6Gal-1. São, contudo, necessários mais ensaios de forma a identificar as moléculas envolvidas neste processo. 4) Por último, analisámos o impacto da sialilação na estimulação antigénica das DCs às células T. Assim, concluiu-se que moDCs tratadas com sialidase apresentam um nível de expressão superior de IL-12, TNF-ɑ, IL-6 e IL-10, e activação do factor de transcrição nuclear kappa B (NF-κB). As DCs tratadas com sialidase induziram uma maior proliferação nas células T, com expressão correspondente de interferão-γ. Este dado sugere que a remoção de ácidos siálicos de superfície contribui para o desenvolvimento de uma resposta pro-inflamatória do tipo 1 por células T auxiliares (resposta Th1). Considerando estes dados no seu todo, concluímos que o ácido siálico tem um papel marcante nas funções imunes das DCs. Alterações à concentração de ácido siálico à superfície das células podem alterar a endocitose/fagocitose, maturação, migração para os tecidos e gânglios linfáticos e capacidade estimulatória para com as células T. Complementando estes dados, as ligações glicosídicas de ácidos siálicos criados por ST6Gal-1 e ST3Gal-1 são funcionalmente relevantes. A modulação programada da sialilação do glicocálice, mediada por sialidases individuais ou sialiltransferases é uma possibilidade aceitável para a melhoria da fagocitose por DCs e da sua potência imunológica. Este facto tem um significado particular para imunoterapias baseadas em DCs, podendo provar-se decisivo para a sua eficiência e aplicabilidade num futuro muito próximo.-------------------------------ABSTRACT: Glycans decorating cell surface and secreted proteins and lipids occupy the junction where critical host–host and host-pathogen interactions occur. In spite of the wide acceptance that glycans are centrally implicated in immunity, exactly how glycans and their variety and variability contribute to the overall immune response remains poorly defined. Glycans, frequently terminated by sialic acid residues, may be modified by external factors such as pathogens or upon specific physiological cellular events. The terminal, privileged positions of sialic acid-modified structures makes them key, fundamental determinants for a number of immune receptors with known involvement in cellular adhesiveness and cell trafficking, such as Selectins and Siglecs, with known relevant immune functions. At the time this thesis was initiated, it was established that sialic acids expressed at cell surface could modulate important mechanisms of the adaptive immune responses. Given the key role of dendritic cells (DCs) in the transition from innate to the adaptive immune responses, we anticipated that sialic acids could also modulate important mechanisms of human DCs. DCs have a relevant role in antigen screening and uptake, migration to lymph nodes and antigen presentation to lymphocytes, ultimately triggering the adaptive immune response. Therefore, our primary hypothesis was that sialic acids may modulate DC functions, such as antigen uptake, maturation, homing to lymph nodes and antigen presentation to T cells. To test this hypothesis, we divided our work in four parts. 1) Surface sialylated glycans expressed during differentiation from human monocytes to DCs (moDCs) were analyzed. Our data showed that α2,3-sialylated O-glycans and α2,6- and α2,3-sialylated N-glycans expression increased during moDC differentiation. Three main sialyltransferases (STs) are committed with this new glycan configuration: ST6Gal- 1 correlates with the increased expression of α2,6-sialylated N-glycans; ST3Gal-1 32 contributes for the α2,3-sialylation of O-glycans, especially T antigens; and ST3Gal-4 may contribute for the increased α2,3-sialylated N-glycans. Upon moDC maturation, ST6Gal-1 and ST3Gal-4 are downregulated and ST3Gal-1 is altered in a stimulus dependent manner. 2) We subsequently analyzed the consequences of the modulation of cell surface sialic acids in DC functions. We observed that removing surface sialic acid by sialidase significantly decreased the capacity of moDCs to micropinocytose and receptormediated endocytose. In contrast, treatment with a sialidase significantly improved the capacity of moDCs to phagocytose Escherichia coli. The improved phagocytosis mechanism required E. coli sialic acids, indicating a mechanism of host–pathogen interaction dependent on sialic acid moieties. Sialidase-treated moDCs have increased expression of MHC and co-stimulatory molecules, suggesting a more mature phenotype. Experiments using mouse bone marrow-derived DCs (BMDCs) from ST3Gal-1-/- and ST6Gal-1-/- strains indicated that endocytosis and maturation are influenced by changes in either α2,3 or α2,6-sialylated glycans. The analysis of α2,6-sialylated, N-glycosylated proteins, strongly suggested the potential involvement of β2 integrins, underlying these mechanisms. 3) The effect of α2,6-sialylation in DC homing to lymph nodes was also analyzed. We observed that BMDCs deficient for ST6Gal-1 have an almost 50% reduction in DC homing, as assayed by in situ inflammation and adoptive transfer studies. A reduction in DC homing was also observed when wild type BMDCs were transferred into ST6Gal-1-/- recipient mice. Further investigations are necessary to identify the molecules involved in this process. 4) Finally, we also analyzed the impact of sialylation on DCs ability to prime T cells. Sialidase-treated moDCs show increased gene expression of IL-12, TNF-α, IL-6 and IL- 10 cytokines, and activation of the transcription factor nuclear factor-κB. Sialidase33 treated DCs induced a higher proliferative response of T cells with concomitant higher expression of interferon-γ, suggesting that the clearance of cell surface sialic acids contributes to the development of a T helper type 1 proinflammatory response. Together, our data strongly support sialic acid’s relevance in DC immune functions. Alterations of cell surface sialic acid content can alter the endocytosis/phagocytosis, maturation, migration/homing and the ability for T cell priming in human DCs. Moreover, sialic acid linkages created by ST6Gal-1 and ST3Gal-1 are functionally relevant. The engineering of cell surface sialylation, mediated by individual sialidases or sialyltransferases is a likely possibility to fine tune DC phagocytosis and immunological potency, with particular significance to DC-based therapies.

Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing

Printed electronics represent an alternative solution for the manufacturing of low-temperature and large area flexible electronics. The use of inkjet printing is showing major advantages when compared to other established printing technologies such as, gravure, screen or offset printing, allowing the reduction of manufacturing costs due to its efficient material usage and the direct-writing approach without requirement of any masks. However, several technological restrictions for printed electronics can hinder its application potential, e.g. the device stability under atmospheric or even more stringent conditions. Here, we study the influence of specific mechanical, chemical, and temperature treatments usually appearing in manufacturing processes for textiles on the electrical performance of all-inkjet-printed organic thin-film transistors (OTFTs). Therefore, OTFTs where manufactured with silver electrodes, a UV curable dielectric, and 6,13-bis(triisopropylsilylethynyl) pentance (TIPS-pentacene) as the active semiconductor layer. All the layers were deposited using inkjet printing. After electrical characterization of the printed OTFTs, a simple encapsulation method was applied followed by the degradation study allowing a comparison of the electrical performance of treated and not treated OTFTs. Industrial calendering, dyeing, washing and stentering were selected as typical textile processes and treatment methods for the printed OTFTs. It is shown that the all-inkjet-printed OTFTs fabricated in this work are functional after their submission to the textiles processes but with degradation in the electrical performance, exhibiting higher degradation in the OTFTs with shorter channel lengths (L=10 μm).

Effect of polymeric matrix on morphology and photoelectric properties of polymer-quantum dots nanocomposites

Recently, CdTe semiconductor quantum dots (QDs) have attracted great interest due to their unique properties [1]. Their dispersion into polymeric matrices would be very for several optoelectronics applications. Despite its importance, there has been relatively little work done on charge transport in the QD polymeric films [2], which is mainly affected by their structural and morphological properties. In the present work, polymer-quantum dot nanocomposites films based on optically transparent polymers in the visible spectral range and CdTe QDs with controlled particle size and emission wavelength, were prepared via solvent casting. Photoluminescent (PL) measurements indicate different emission intensity of the nanocomposites. A blue shift of the emission peak compared to that of QDs in solution occurred, which is attributed to the QDs environment changes. The morphological and structural properties of the CdTe nanocomposites were evaluated. Since better QDs dispersion was achieved, PMMA seemed to be the most promising matrix. Electrical properties measurements indicate an ohmic behavior.

Design of assemblies based on polymer-coated quantum dots and organic dye

During last years, photophysical properties of complexes of semiconductor quantum dots (QDs) with organic dyes have attracted increasing interest. The development of different assemblies based on QDs and organic dyes allows to increase the range of QDs applications, which include imaging, biological sensing and electronic devices.1 Some studies demonstrate energy transfer between QDs and organic dye in assemblies.2 However, for electronic devices purposes, a polymeric matrix is required to enhance QDs photostability. Thus, in order to attach the QDs to the polymer surface it is necessary to chemically modify the polymer to induce electronic charges and stabilize the QDs in the polymer. The present work aims to investigate the design of assemblies based on polymer-coated QDs and an integrated acceptor organic dye. Polymethylmethacrylate (PMMA) and polycarbonate (PC) were used as polymeric matrices, and nile red as acceptor. Additionally, a PMMA matrix modified with 2-mercaptoethylamine is used to improve the attachment between both the donor (QDs) and the acceptor (nile red), as well as to induce a covalent bond between the modified PMMA and the QDs. An enhancement of the energy transfer efficiency by using the modified PMMA is expected and the resulting assembly can be applied for energy harvesting.

Electronic structure and optical signatures of semiconducting transition metal dichalcogenide nanosheets

CONSPECTUS: Two-dimensional (2D) crystals derived from transition metal dichalcogenides (TMDs) are intriguing materials that offer a unique platform to study fundamental physical phenomena as well as to explore development of novel devices. Semiconducting group 6 TMDs such as MoS2 and WSe2 are known for their large optical absorption coefficient and their potential for high efficiency photovoltaics and photodetectors. Monolayer sheets of these compounds are flexible, stretchable, and soft semiconductors with a direct band gap in contrast to their well-known bulk crystals that are rigid and hard indirect gap semiconductors. Recent intense research has been motivated by the distinct electrical, optical, and mechanical properties of these TMD crystals in the ultimate thickness regime. As a semiconductor with a band gap in the visible to near-IR frequencies, these 2D MX2 materials (M = Mo, W; X = S, Se) exhibit distinct excitonic absorption and emission features. In this Account, we discuss how optical spectroscopy of these materials allows investigation of their electronic properties and the relaxation dynamics of excitons. We first discuss the basic electronic structure of 2D TMDs highlighting the key features of the dispersion relation. With the help of theoretical calculations, we further discuss how photoluminescence energy of direct and indirect excitons provide a guide to understanding the evolution of the electronic structure as a function of the number of layers. We also highlight the behavior of the two competing conduction valleys and their role in the optical processes. Intercalation of group 6 TMDs by alkali metals results in the structural phase transformation with corresponding semiconductor-to-metal transition. Monolayer TMDs obtained by intercalation-assisted exfoliation retains the metastable metallic phase. Mild annealing, however, destabilizes the metastable phase and gradually restores the original semiconducting phase. Interestingly, the semiconducting 2H phase, metallic 1T phase, and a charge-density-wave-like 1T' phase can coexist within a single crystalline monolayer sheet. We further discuss the electronic properties of the restacked films of chemically exfoliated MoS2. Finally, we focus on the strong optical absorption and related exciton relaxation in monolayer and bilayer MX2. Monolayer MX2 absorbs as much as 30% of incident photons in the blue region of the visible light despite being atomically thin. This giant absorption is attributed to nesting of the conduction and valence bands, which leads to diversion of optical conductivity. We describe how the relaxation pathway of excitons depends strongly on the excitation energy. Excitation at the band nesting region is of unique significance because it leads to relaxation of electrons and holes with opposite momentum and spontaneous formation of indirect excitons.

Degradação fotocatalítica de petróleo e seus derivados através da utilização de nanopartículas de dióxido de titânio puro e misturado com óxido de grafeno reduzido

Dissertação de mestrado integrado em Engenharia de Materiais

Electroquímica de sustancias orgánicas, mecanismos y electrosíntesis: Producción y aplicación de electrodos modificados

En este trabajo se trata de elucidar los procesos de oxidación-reducción electroquímica de compuestos orgánico aromáticos. Interesan los productos de reacción y el manejo de las variables externas para lograr la optimización de los que sean de interés. Estos estudios se realizan en medios homogéneos y además en medios bifásicos. Así se estudian procesos de electrodos con sustancias orgánicas en sistemas bifásicos líquido-líquido. Interesan conocer los mecanismos de fotoelectroquímica de moléculas biomiméticas tales como carotenos y porfirinas, principalmente en lo referente a la producción de fotocorriente. También se estudian procesos relacionados a la preparación y obtención de electrodos modificados por sustancias orgánicas poliméricas y electrodos sensores como los de metal-óxido y polímero orgánico-metal polidisperso. Objetivos generales y específicos: Los estudios electroquímicos con sustancias orgánicas comprenden una amplia gama de posibilidades. En este proyecto se estudian procesos de electrodo de diversas sustancias orgánicas donde se trata de dilucidar los mecanismos de los procesos redox en general. En lo particular se estudia el comportamiento electroquímico y fotoelectroquímico de sustancias biomiméticas como son los compuestos carotenoides y porfirinas. Interesa fundamentalmente la producción de fotocorriente obtenidas a través de la fotoexcitación. Se propone analizar la sensibilización de semiconductores (SnO2) por medio de moléculas biomiméticas. Estas últimas actúan como aceptor primario de energía radiante y transfieren un hueco o un electrón desde el estado excitado a las bandas de energía del semiconductor base. También se estudian procesos relacionados con la preparación y obtención de electrodos modificados por sustancias orgánicas poliméricas. En este laboratorio ya se han obtenido varios tipos de polímeros y en este proyecto se propone someterlos a condiciones extremas de potencial y a medios agresivos a fin de determinar este tipo de propiedades. Una de las aplicaciones inmediatas de estos electrodos es utilizarlos como sensores electroquímicos para diversas sustancias orgánicas. Por otro lado se estudian procesos electroquímicos en interfaces líquido/ líquido, pseudofaces (micelas) además de medios homogéneos. Como reacción modelo se utiliza nitración de naftaleno.

MOVPE growth and characterisation of ZnO properties for optoelectronic applications

ZnO, Epitaxy, Metal organic vapor phase epitaxy, MOCVD, CVD, Semiconductor, Optoelectronics, X-ray diffraction, Cathodoluminescence, Microelectronics

Model analític de les característiques DC de transistors de doble porta

En aquest treball s’implementa un model analític de les característiques DC del MOSFET de doble porta (DG-MOSFET), basat en la solució de l’equació de Poisson i en la teoria de deriva-difussió[1]. El MOSFET de doble porta asimètric presenta una gran flexibilitat en el disseny de la tensió llindar i del corrent OFF. El model analític reprodueix les característiques DC del DG-MOSFET de canal llarg i és la base per construir models circuitals tipus SPICE.