The blood volumes of the primary and secondary circulatory system in the Atlantic cod Gadus morhua L., using plasma bound Evans Blue and compartmental analysis

The volume of the primary (PCS) and secondary (SCS) circulatory system in the Atlantic cod Gadus morhua was determined using a modified dye dilution technique. Cod (N=10) were chronically cannulated in the second afferent branchial artery with PE-50 tubing. Evans Blue dye was bound to harvested fish plasma at a concentration of 1 mg dye ml(-1) plasma, and injected at a concentration of 1 mg kg(-1) body mass. Serial sampling from the cannula produced a dye dilution curve, which could be described by a double exponential decay equation. Curve analysis enabled the calculation of the primary circulatory and total distribution volume. The difference between these volumes is assumed to be the volume of the SCS. From the dilution curve, it was also possible to calculate flow rates between and within the systems. The results of these experiments suggest a plasma volume in the PCS of 3.42+/-0.89 ml 100 g(-1) body mass, and in the SCS of 1.68+/-0.35 ml 100 g(-1) body mass (mean +/- S.D.) or approximately 50% that of the PCS. Flow rates to the SCS were calculated as 2.7% of the resting cardiac output. There was an allometric relationship between body mass and blood volumes. Increasing condition factor showed a tendency towards smaller blood volumes of the PCS, expressed as percentage body mass, but this was not evident for the volume of the SCS.

Novel sesquiterpenes from the fungus lactarius piperatus

Four novel sesquiterpenes, namely 7alpha,8beta,13-trihydroxy-5,13-marasmanolide (2), isoplorantinone (5), 4,8,14-trihydroxyilludala-2,6,8-triene (6), and 8-hydroxy-8,9-secolactara-1,6-dien-5,13-olide (10), together with six known ones, 7alpha,8beta-dihydroxy-5,13-marasmanolide (1), 7alpha,8alpha-dihydroxy-5,13-marasmanolide (3), isolactarorufin (4), blennin A (7), blennin D (8), and lactarorufin (9), were isolated from the ethanolic extract of Lactarius piperatus. The structures of these sesquiterpenes, representing diversified structural types, were determined mainly by spectroscopic methods, especially 2D-NMR techniques. The structure of 6 was further confirmed by a single-crystal X-ray-diffraction determination.

Low input tillage/cropping systems for limited resource areas

Agriculture in limited resource areas is characterized by small farms which an generally too small to adequately support the needs of an average farm family. The farming operation can be described as a low input cropping system with the main energy source being manual labor, draught animals and in some areas hand tractors. These farming systems are the most important contributor to the national economy of many developing countries. The role of tillage is similar in dryland agricultural systems in both the high input (HICS) and low input cropping systems (LICS), however, wet cultivation or puddling is unique to lowland rice-based systems in low input cropping systems. Evidence suggest that tillage may result in marginal increases in crop yield in the short term, however, in the longer term it may be neutral or give rise to yield decreases associated with soil structural degradation. On marginal soils, tillage may be required to prepare suitable seedbeds or to release adequate Nitrogen through mineralization, but in the longer term, however, tillage reduces soil organic matter content, increases soil erodibility and the emission of greenhouse gases. Tillage in low input cropping systems involves a very large proportion of the population and any changes: in current practices such as increased mechanization will have a large social impact such as increased unemployment and increasing feminization of poverty, as mechanization may actually reduce jobs for women. Rapid mechanization is likely to result in failures, but slower change, accompanied by measures to provide alternative rural employment, might be beneficial. Agriculture in limited resource areas must produce the food and fiber needs of their community, and its future depends on the development of sustainable tillage/cropping systems that are suitable for the soil and climatic conditions. These should be based on sound biophysical principles and meet the needs of and he acceptable to the farming communities. Some of the principle requirements for a sustainable system includes the maintenance of soil health, an increase in the rain water use efficiency of the system, increased use of fertilizer and the prevention of erosion. The maintenance of crop residues on the surface is paramount for meeting these requirements, and the competing use of crop residues must be met from other sources. These requirements can be met within a zonal tillage system combined with suitable agroforestry, which will reduce the need for crop residues. It is, however, essential that farmers participate in the development of any new technologies to ensure adoption of the new system. (C) 2001 Elsevier Science B.V. All rights reserved.

3-pyridylcarbene and 3-pyridylnitrene: Ring opening to nitrile ylides

Photolysis of 3-pyridyldiazomethane in an Ar matrix at 7-10 K gives 3-pyridylcarbene. Further photolysis causes ring opening to nitrile ylide 26 (formonitrile pent-2-en-4-ynylide) as the major reaction together with a minor amount of ring expansion to 1-azacyclohepta-1,3,4,6-tetraene, 27. Matrix photolysis of 3-azidopyridine leads to ring opening to formonitrile N-cyanovinylmethylide, 33.

Amylases in enzyme detergents and their effects on a simulated long-life dairy dessert

Enzyme detergents used in the food industry contain proteinase as the major enzyme but amylase may be present, either by design or inadvertently. Three commercial enzyme detergents and 3 enzyme preparations used in detergents were assayed for alpha-amylase activity by the Ceralpha method using the Megazyme kits. The amylase activities of the detergents varied from 3.2x 10(-6) to 32x 10(-6) mumoles ml(-1) h(-1) while the enzyme preparations had much higher activities ranging from 0.05 to 8.06 mumoles ml(-1) h(-1). When added aseptically to a simulated dairy dessert (2% starch solution) and stored for 42 days, the enzyme detergents caused an increase in viscosity; enzyme preparations at low concentrations caused an initial increase in viscosity followed by a decrease; and enzyme preparations at high concentrations caused an immediate decrease in viscosity. The increase in viscosity corresponded to formation of a distinct network of starch granules while the decrease in viscosity was characterised by a marked decrease in size of the granules and little or no network of granules. Decreases in viscosity corresponded to increases in reducing sugars but samples which increased in viscosity showed no measurable reducing sugars. The amylase activity in all sources was destroyed by heating at 75degreesC for 15 min at pH 1.8.

Heat resistance of Bacillus spores when adhered to stainless steel and its relationship to spore hydrophobicity

Twenty-one strains of Bacillus (10 B. stearothermophilus, 3 B. cereus, and 8 B. licheniformis strains) were assayed for spore surface hydrophobicity on the basis of three measures: contact angle measurement (CAM), microbial adhesion to hydrocarbons (MATH), and hydrophobic interaction chromatography (HIC). On the basis of the spore surface characteristics obtained from these assays, along with data on the heat resistance of these spores in water, eight strains of Bacillus (three B. stearothermophilus, three B. cereus, and two B. licheniformis strains) either suspended in water or adhering to stainless steel were exposed to sublethal heat treatments at 90 to 110degreesC to determine heat resistance (D-value). Significant increases in heat resistance (ranging from 3 to 400%) were observed for the eight strains adhering to stainless steel. No significant correlation was found between these heat resistance increases and spore surface characteristics as determined by the three hydrophobicity assays. There was a significant positive correlation between the hydrophobicity data obtained by the MATH assay and those obtained by the HIC assay, but these data did not correlate with those obtained by the CAM assay.

Combining nonthermal technologies to control foodborne microorganisms

Novel nonthermal processes, such as high hydrostatic pressure (HHP), pulsed electric fields (PEFs), ionizing radiation and ultrasonication, are able to inactivate microorganisms at ambient or sublethal temperatures. Many of these processes require very high treatment intensities, however, to achieve adequate microbial destruction in low-acid foods. Combining nonthermal processes with conventional preservation methods enhances their antimicrobial effect so that lower process intensities can be used. Combining two or more nonthermal processes can also enhance microbial inactivation and allow the use of lower individual treatment intensities. For conventional preservation treatments, optimal microbial control is achieved through the hurdle concept, with synergistic effects resulting from different components of the microbial cell being targeted simultaneously. The mechanisms of inactivation by nonthermal processes are still unclear; thus, the bases of synergistic combinations remain speculative. This paper reviews literature on the antimicrobial efficiencies of nonthermal processes combined with conventional and novel nonthermal technologies. Where possible, the proposed mechanisms of synergy is mentioned. (C) 2003 Elsevier Science B.V. All rights reserved.

Diagnosing the cause of proteolysis in UHT milk

Proteolysis of UHT milk during storage at room temperature is a major factor limiting its shelf-life through changes in its flavour and texture. The latter is characterised by increases in viscosity leading in some cases to gel formation. The enzymes responsible for the proteolysis are the native milk alkaline proteinase, plasmin, and heat-stable, extracellular bacterial proteinases produced by psychrotrophic bacterial contaminants in the milk prior to heat processing. These proteinases react differently with the milk proteins and produce different peptides in the UHT milk. In order to differentiate these peptide products, reversed-phase HPLC and the fluorescamine method were used to analyse the peptides soluble in 12% trichloroacetic acid (TCA) and those soluble at pH 4.6. The TCA filtrate showed substantial peptide peaks only if the milk was contaminated by bacterial proteinase, while the pH 4.6 filtrate showed peptide peaks when either or both bacterial and native milk proteinases caused the proteolysis. Results from the fluorescamine test were in accordance with the HPLC results whereby the TCA filtrate exhibited significant proteolysis values only when bacterial proteinases were present, but the pH 4.6 filtrates showed significant values when the milk contained either or both types of proteinase. A procedure based on these analyses is proposed as a diagnostic test for determining which type of proteinase-milk plasmin, bacterial proteinase, or both-is responsible for proteolysis in UHT milk. (C) 2003 Swiss Society of Food Science and Technology. Published by Elsevier Science Ltd. All rights reserved.

Effect of storage time and conditions on the seed coat colour of Australian adzuki beans

Two varieties of adzuki beans (Vigna angularis), Bloodwood and Erimo, were stored at temperatures of 10, 20 or 30degreesC, and relative humidities (RH) 40 or 65%, and samples were analysed at 0, 1.5, 3 and 6 months. Storage at 30degreesC for > 1.5 months caused a significant decrease in the a(star) and b(star) colour values and darkening of the seed coat. Beans stored at 65% RH had lower L-star but higher a(star) and b(star) colour values than those stored at 40% RH. Bloodwood and Erimo samples showed similar trends in colour during storage. The best storage conditions for the preservation of the adzuki colour were 10degreesC and 65% RH. The Australian beans had lower L-star, a(star) and b(star) colour values than Japanese Erimo-shouzu beans and storage increased the difference.

Effect of storage time and conditions on the cotyledon cell wall of the adzuki bean (Vigna angularis)

Two varieties of adzuki grown in Australia, Bloodwood and Erimo, were stored for up to 6 months at three temperatures (10, 20 and 30 degreesC), and two relative humidities (RH; 40 and 65%). The amount of cell wall material increased with time under all storage conditions. This increase was greatest at 30 degreesC and 40% RH. Storage time and conditions did not affect the total pectin levels in the cell wall. Erimo constantly exhibited a higher total pectin level than Bloodwood. The Bloodwood soluble pectin, Ca++ and Mg++ and Erimo Ca++ in the cell wall remained stable during storage, while the Erimo soluble pectin and Mg++ exhibited a slight decrease at 20 and 30 degreesC after 3 months of storage. (C) 2002 Elsevier Science Ltd. All rights reserved.

Flavonoids, phenolic acids and abscisic acid in Australian and New Zealand Leptospermum honeys

Flavonoids, phenolic acids and abscisic acid of Australian and New Zealand Leptospermum honeys were analyzed by HPLC. Fifteen flavonoids were isolated in Australian jelly bush honey (Leptospermum polygalifolium), with an average content of 2.22 mg/100 g honey. Myricetin (3,5,7,3',4',5'-hexahydroxyflavone), luteolin (5,7,3',4'-tetrahydroxyflavone) and tricetin (5,7,3',4',5'-pentahydroxyflavone) were the main flavonoids identified. The mean content of total phenolic acids in jelly bush honey was 5.14 mg/100 g honey, with gallic and coumaric acids as the potential phenolic acids. Abscisic acid was quantified as twice the amount (11.6 mg/100 g honey) of the phenolic acids in this honey. The flavonoid profile mainly consisted of quercetin (3,5,7,3',4'-pentahydroxyflavone), isorhamnetin (3,5,7,4'-tetrahydroxyflavone 3'-methyl ethyl), chrysin (5,7-dihydroxyflavone), luteolin and an unknown flavanone in New Zealand manuka (Leptospermum scoparium) honey with an average content of total flavonoids of 3.06 mg/100 g honey. The content of total phenolic acids was up to 14.0 mg/100 g honey, with gallic acid as the main component. A substantial quantity (32.8 mg/100 g honey) of abscisic acid was present in manuka honey. These results showed that flavonoids and phenolic acids could be used for authenticating honey floral origins, and abscisic acid may aid in this authentication. (C) 2002 Published by Elsevier Science Ltd.

Microscopic structure of opalescent and nonopalescent pecans

The ultrastructure of pecans was investigated using light microscopy, environmental scanning electron microscopy, scanning electron microscopy, and transmission electron microscopy. Specific methodology for the sample preparation of pecans for electron microscopy investigations was developed. Electron microscopy of the ultrastructure of opalescent (discoloration of the interior) and nonopalescent kernels revealed that cellular damage was occurring in opalescent kernels. The damage was due to cell wall and membrane rupture, which accounted for the release of oil throughout the kernel. This rupture is due to the lower level of calcium in the cell membranes of opalescent pecans, as shown by energy dispersive X-ray spectrometry, making them more susceptible to damage.

Compositional changes of Australia-grown Western Schley pecans [Carya illinoinensis (Wangenh.) K. Koch] during maturation

Changes in composition during the maturation of Western Schley pecans [Carya illinoinensis (Wangenh.) K. Koch] grown in Australia were investigated. Pecans of different maturity levels were collected at monthly intervals between March and June in. 1999 and 2000 and analyzed for the concentrations of moisture, total lipid, sucrose, raffinose, protein, and the minerals aluminum, boron, calcium, copper, iron, potassium, magnesium, manganese, sodium, phosphorus, sulfur, and zinc. Moisture, total lipid, and calcium contents changed significantly (p < 0.05) with harvest time and maturity, whereas the other components did not. Western Schley pecans grown in Australia should be harvested after the shuck has opened and it is either green or brown in color to maximize total lipid content and quality. This occurred after May 11 in 1999 and after May 17 in 2000.

Consciência estética e experiência com a arte na hermenêutica gadameriana

Esta dissertação parte das bases da crítica de Gadamer à consciência estética desde o contexto de fundamentação das ciências naturais e decorrente estabelecimento das ciências humanas. Considerando o posicionamento contrário de Gadamer quanto ao predomínio dos métodos das ciências naturais em todos os âmbitos da experiência humana no mundo, nosso esforço será no sentido de abordar a compreensão da experiência estética. Neste sentido, nos voltaremos para a aisthesis com vistas a caminhar focando na problemática em torno da arte a partir de Platão e Aristóteles, culminando no estabelecimento da estética como campo específico do saber filosófico no pensamento iluminista de Baumgarten. Destarte, o presente escrito voltar-se-á para as bases da consciência estética que se encontram na subjetivação decorrente dos efeitos do pensamento crítico de Kant. Com isso, abordaremos as perspectivas de Gadamer com vistas a liberar a experiência da arte do âmbito da consciência estética, o que, segundo este filósofo, pode ocorrer a partir da assunção de um tipo de experiência que pode ser tomado como verdade mesmo não estando restrito aos métodos das ciências naturais. Partindo desta prerrogativa,Gadamer lança mão da noção de jogo como experiência fora da centralidade subjetiva. Com o redirecionamento da experiência, o fenômeno artístico pode aparecer como parte constitutiva da experiência existencial humana sem estar restrito às faculdades subjetivas.

Nanofiltration of Cork Wastewaters and Their Possible Use in Leather Industry as Tanning Agents

Cork processing wastewater is a very complex mixture of vegetal extracts and has, among other natural compounds, a very high content of phenolic/tannic colloidal matter that is responsible for severe environmental problems. In the present work, the concentration of this wastewater by nanofiltration was investigated with the aim of producing a cork tannin concentrate to be utilized in tanning. Permeation results showed that the permeate fluxes are controlled by both osmotic pressure and fouling/gel layer phenomena, leading to a rapid decrease of permeate fluxes with the concentration factor. The rejection coefficients to organic matter were higher than 95%, indicating that nanofiltration has a very good ability to concentrate the tannins and produce a permeate stream depleted from organic matter. The cork tannin concentrate obtained by nanofiltration and evaporation had total solids concentration of 34.8 g/l. The skins tanned by this concentrate were effectively converted to leather with a shrinking temperature of 7 degrees C.