Navigational traffic conflict technique: a proactive approach to quantitative measurement of collision risks in port waters

Navigational safety analysis relying on collision statistics is often hampered because of low number of observations. A promising alternative approach that overcomes this problem is proposed in this paper. By analyzing critical vessel interactions this approach proactively measures collision risk in port waters. The proposed method is illustrated for quantitative measurement of collision risks in Singapore port fairways, and validated by examining correlations between the measured risks with those perceived by pilots. This method is an ethically appealing alternative to the collision-based analysis for fast, reliable and effective safety assessment, thus possesses great potential for managing collision risks in port waters.

Investigating the change in three dimensional deformity for idiopathic scoliosis using axially loaded MRI

Background: Adolescent idiopathic scoliosis is a complex three-dimensional deformity, involving a lateral deformity in the coronal plane and axial rotation of the vertebrae in the transverse plane. Gravitational loading plays an important biomechanical role in governing the coronal deformity, however, less is known about how they influence the axial deformity. This study investigates the change in three-dimensional deformity of a series of scoliosis patients due to compressive axial loading. Methods: Magnetic resonance imaging scans were obtained and coronal deformity (measured using the coronal Cobb angle) and axial rotations measured for a group of 18 scoliosis patients (Mean major Cobb angle was 43.4 o). Each patient was scanned in an unloaded and loaded condition while compressive loads equivalent to 50% body mass were applied using a custom developed compressive device. Findings: The mean increase in major Cobb angle due to compressive loading was 7.4 o (SD 3.5 o). The most axially rotated vertebra was observed at the apex of the structural curve and the largest average intravertebral rotations were observed toward the limits of the coronal deformity. A level-wise comparison showed no significant difference between the average loaded and unloaded vertebral axial rotations (intra-observer error = 2.56 o) or intravertebral rotations at each spinal level. Interpretation: This study suggests that the biomechanical effects of axial loading primarily influence the coronal deformity, with no significant change in vertebral axial rotation or intravertebral rotation observed between the unloaded and loaded condition. However, the magnitude of changes in vertebral rotation with compressive loading may have been too small to detect given the resolution of the current technique.

An innovative approach to the assessment of nutrient intake in adults with type 2 diabetes : the development, trial and evaluation of a mobile phone photo/voice dietary record

Nutrition interventions in the form of both self-management education and individualised diet therapy are considered essential for the long-term management of type 2 diabetes mellitus (T2DM). The measurement of diet is essential to inform, support and evaluate nutrition interventions in the management of T2DM. Barriers inherent within health care settings and systems limit ongoing access to personnel and resources, while traditional prospective methods of assessing diet are burdensome for the individual and often result in changes in typical intake to facilitate recording. This thesis investigated the inclusion of information and communication technologies (ICT) to overcome limitations to current approaches in the nutritional management of T2DM, in particular the development, trial and evaluation of the Nutricam dietary assessment method (NuDAM) consisting of a mobile phone photo/voice application to assess nutrient intake in a free-living environment with older adults with T2DM. Study 1: Effectiveness of an automated telephone system in promoting change in dietary intake among adults with T2DM The effectiveness of an automated telephone system, Telephone-Linked Care (TLC) Diabetes, designed to deliver self-management education was evaluated in terms of promoting dietary change in adults with T2DM and sub-optimal glycaemic control. In this secondary data analysis independent of the larger randomised controlled trial, complete data was available for 95 adults (59 male; mean age(±SD)=56.8±8.1 years; mean(±SD)BMI=34.2±7.0kg/m2). The treatment effect showed a reduction in total fat of 1.4% and saturated fat of 0.9% energy intake, body weight of 0.7 kg and waist circumference of 2.0 cm. In addition, a significant increase in the nutrition self-efficacy score of 1.3 (p<0.05) was observed in the TLC group compared to the control group. The modest trends observed in this study indicate that the TLC Diabetes system does support the adoption of positive nutrition behaviours as a result of diabetes self-management education, however caution must be applied in the interpretation of results due to the inherent limitations of the dietary assessment method used. The decision to use a close-list FFQ with known bias may have influenced the accuracy of reporting dietary intake in this instance. This study provided an example of the methodological challenges experienced with measuring changes in absolute diet using a FFQ, and reaffirmed the need for novel prospective assessment methods capable of capturing natural variance in usual intakes. Study 2: The development and trial of NuDAM recording protocol The feasibility of the Nutricam mobile phone photo/voice dietary record was evaluated in 10 adults with T2DM (6 Male; age=64.7±3.8 years; BMI=33.9±7.0 kg/m2). Intake was recorded over a 3-day period using both Nutricam and a written estimated food record (EFR). Compared to the EFR, the Nutricam device was found to be acceptable among subjects, however, energy intake was under-recorded using Nutricam (-0.6±0.8 MJ/day; p<0.05). Beverages and snacks were the items most frequently not recorded using Nutricam; however forgotten meals contributed to the greatest difference in energy intake between records. In addition, the quality of dietary data recorded using Nutricam was unacceptable for just under one-third of entries. It was concluded that an additional mechanism was necessary to complement dietary information collected via Nutricam. Modifications to the method were made to allow for clarification of Nutricam entries and probing forgotten foods during a brief phone call to the subject the following morning. The revised recording protocol was evaluated in Study 4. Study 3: The development and trial of the NuDAM analysis protocol Part A explored the effect of the type of portion size estimation aid (PSEA) on the error associated with quantifying four portions of 15 single foods items contained in photographs. Seventeen dietetic students (1 male; age=24.7±9.1 years; BMI=21.1±1.9 kg/m2) estimated all food portions on two occasions: without aids and with aids (food models or reference food photographs). Overall, the use of a PSEA significantly reduced mean (±SD) group error between estimates compared to no aid (-2.5±11.5% vs. 19.0±28.8%; p<0.05). The type of PSEA (i.e. food models vs. reference food photograph) did not have a notable effect on the group estimation error (-6.7±14.9% vs. 1.4±5.9%, respectively; p=0.321). This exploratory study provided evidence that the use of aids in general, rather than the type, was more effective in reducing estimation error. Findings guided the development of the Dietary Estimation and Assessment Tool (DEAT) for use in the analysis of the Nutricam dietary record. Part B evaluated the effect of the DEAT on the error associated with the quantification of two 3-day Nutricam dietary records in a sample of 29 dietetic students (2 males; age=23.3±5.1 years; BMI=20.6±1.9 kg/m2). Subjects were randomised into two groups: Group A and Group B. For Record 1, the use of the DEAT (Group A) resulted in a smaller error compared to estimations made without the tool (Group B) (17.7±15.8%/day vs. 34.0±22.6%/day, p=0.331; respectively). In comparison, all subjects used the DEAT to estimate Record 2, with resultant error similar between Group A and B (21.2±19.2%/day vs. 25.8±13.6%/day; p=0.377 respectively). In general, the moderate estimation error associated with quantifying food items did not translate into clinically significant differences in the nutrient profile of the Nutricam dietary records, only amorphous foods were notably over-estimated in energy content without the use of the DEAT (57kJ/day vs. 274kJ/day; p<0.001). A large proportion (89.6%) of the group found the DEAT helpful when quantifying food items contained in the Nutricam dietary records. The use of the DEAT reduced quantification error, minimising any potential effect on the estimation of energy and macronutrient intake. Study 4: Evaluation of the NuDAM The accuracy and inter-rater reliability of the NuDAM to assess energy and macronutrient intake was evaluated in a sample of 10 adults (6 males; age=61.2±6.9 years; BMI=31.0±4.5 kg/m2). Intake recorded using both the NuDAM and a weighed food record (WFR) was coded by three dietitians and compared with an objective measure of total energy expenditure (TEE) obtained using the doubly labelled water technique. At the group level, energy intake (EI) was under-reported to a similar extent using both methods, with the ratio of EI:TEE was 0.76±0.20 for the NuDAM and 0.76±0.17 for the WFR. At the individual level, four subjects reported implausible levels of energy intake using the WFR method, compared to three using the NuDAM. Overall, moderate to high correlation coefficients (r=0.57-0.85) were found across energy and macronutrients except fat (r=0.24) between the two dietary measures. High agreement was observed between dietitians for estimates of energy and macronutrient derived for both the NuDAM (ICC=0.77-0.99; p<0.001) and WFR (ICC=0.82-0.99; p<0.001). All subjects preferred using the NuDAM over the WFR to record intake and were willing to use the novel method again over longer recording periods. This research program explored two novel approaches which utilised distinct technologies to aid in the nutritional management of adults with T2DM. In particular, this thesis makes a significant contribution to the evidence base surrounding the use of PhRs through the development, trial and evaluation of a novel mobile phone photo/voice dietary record. The NuDAM is an extremely promising advancement in the nutritional management of individuals with diabetes and other chronic conditions. Future applications lie in integrating the NuDAM with other technologies to facilitate practice across the remaining stages of the nutrition care process.

Achieving quality improvement in the mask manufacturing industry by using Six Sigma technique

The Six Sigma technique is one of the quality management strategies and is utilised for improving the quality and productivity in the manufacturing process. It is inspired by the two major project methodologies of Deming’s "Plan – Do – Check – Act (PDCA)" Cycle which consists of DMAIC and DMADV. Those two methodologies are comprised of five phases. The DMAIC project methodology will be comprehensively used in this research. In brief, DMAIC is utilised for improving the existing manufacturing process and it involves the phases Define, Measure, Analyse, Improve, and Control. Mask industry has become a significant industry in today’s society since the outbreak of some serious diseases such as the Severe Acute Respiratory Syndrome (SARS), bird flu, influenza, swine flu and hay fever. Protecting the respiratory system, then, has become the fundamental requirement for preventing respiratory deceases. Mask is the most appropriate and protective product inasmuch as it is effective in protecting the respiratory tract and resisting the virus infection through air. In order to satisfy various customers’ requirements, thousands of mask products are designed in the market. Moreover, masks are also widely used in industries including medical industries, semi-conductor industries, food industries, traditional manufacturing, and metal industries. Notwithstanding the quality of masks have become the prioritisations since they are used to prevent dangerous diseases and safeguard people, the quality improvement technique are of very high significance in mask industry. The purpose of this research project is firstly to investigate the current quality control practices in a mask industry, then, to explore the feasibility of using Six Sigma technique in that industry, and finally, to implement the Six Sigma technique in the case company to develop and evaluate the product quality process. This research mainly investigates the quality problems of musk industry and effectiveness of six sigma technique in musk industry with the United Excel Enterprise Corporation (UEE) Company as a case company. The DMAIC project methodology in the Six Sigma technique is adopted and developed in this research. This research makes significant contribution to knowledge. The main results contribute to the discovering the root causes of quality problems in a mask industry. Secondly, the company was able to increase not only acceptance rate but quality level by utilising the Six Sigma technique. Hence, utilising the Six Sigma technique could increase the production capacity of the company. Third, the Six Sigma technique is necessary to be extensively modified to improve the quality control in the mask industry. The impact of the Six Sigma technique on the overall performance in the business organisation should be further explored in future research.

The relationship between lower intelligence, crime and custodial outcomes : a brief literary review of a vulnerable group

The relationship between intellectual functioning and criminal offending has received considerable focus within the literature. While there remains debate regarding the existence (and strength) of this relationship, there is a wider consensus that individuals with below average functioning (in particular cognitive impairments) are disproportionately represented within the prison population. This paper focuses on research that has implications for the effective management of lower functioning individuals within correctional environments as well as the successful rehabilitation and release of such individuals back into the community. This includes a review of the literature regarding the link between lower intelligence and offending and the identification of possible factors that either facilitate (or confound) this relationship. The main themes to emerge from this review are that individuals with lower intellectual functioning continue to be disproportionately represented in custodial settings and that there is a need to increase the provision of specialised programs to cater for their needs. Further research is also needed into a range of areas including: (1) the reason for this over-representation in custodial settings, (2) the existence and effectiveness of rehabilitation and release programs that cater for lower IQ offenders, (3) the effectiveness of custodial alternatives for this group (e.g. intensive corrections orders) and (4) what post-custodial release services are needed to reduce the risk of recidivism.

Leveraging innovation for sustainable construction, proceedings of the CIB Task Group 58: Clients and Construction Innovation Workshop

This publication consists of a volume of papers presented at the workshop of the CIB Task Group 58: Clients and Construction Innovation, held on May 18- 19, 2009 at the University of Alberta in Edmonton, Canada. The workshop theme, “Leveraging Innovation for Sustainable Construction”, reflects a growing concern among clients for perspectives, approaches, and tools that will secure the practice of construction economically, socially, and environmentally. This collection encompasses some of the most incisive assessments of the challenges facing the construction industry today from a range of researchers and industry practitioners who are leading the way for tomorrow’s innovations. It provides a useful documentation of the ongoing conversation regarding innovation and sustainability issues and a foundation of knowledge for future research and development. The papers contained in this volume explore the workshop’s overarching theme of how to leverage innovation to increase the sustainability of the construction process and product. Participants sought to generate discussion on the topics of innovation and sustainability within the construction field, to share international examples of innovation from the research community and from industry, and to establish a point of reference for ongoing enquiry. In particular, our contributors have noted the value of learning through practice in order to orient research based on real-world industry experience. Chapters two and three present complementary models of sustainable research programs through the three parts collaboration of government, industry, and academia. Chapters four and five explore new tools and forms of technological innovation as they are deployed to improve construction project management and set the direction for advances in research. Chapters six, seven, and eight closely study practical examples of innovation in large-scale construction projects, showing with concrete results the impact of applying creative methods and best practices to the field. Innovation and sustainability in construction are truly global efforts; these papers illustrate how we can draw on international examples and cooperative organizations to address these important issues for long-term benefit of the industry.

An investigation on multi-vehicle motorcycle crashes using log-linear models

Motorcyclists are the most crash-prone road-user group in many Asian countries including Singapore; however, factors influencing motorcycle crashes are still not well understood. This study examines the effects of various roadway characteristics, traffic control measures and environmental factors on motorcycle crashes at different location types including expressways and intersections. Using techniques of categorical data analysis, this study has developed a set of log-linear models to investigate multi-vehicle motorcycle crashes in Singapore. Motorcycle crash risks in different circumstances have been calculated after controlling for the exposure estimated by the induced exposure technique. Results show that night-time influence increases crash risks of motorcycles particularly during merging and diverging manoeuvres on expressways, and turning manoeuvres at intersections. Riders appear to exercise more care while riding on wet road surfaces particularly during night. Many hazardous interactions at intersections tend to be related to the failure of drivers to notice a motorcycle as well as to judge correctly the speed/distance of an oncoming motorcycle. Road side conflicts due to stopping/waiting vehicles and interactions with opposing traffic on undivided roads have been found to be as detrimental factors on motorcycle safety along arterial, main and local roads away from intersections. Based on the findings of this study, several targeted countermeasures in the form of legislations, rider training, and safety awareness programmes have been recommended.

Group dynamics and software engineering

This paper reports on an experiment that was conducted to determine the extent to which group dynamics impacts on the effectiveness of software development teams. The experiment was conducted on software engineering project students at the Queensland University of Technology (QUT).

Inactivation and structural changes of E. Cloacae and B. Subtilis Endospores during IR laser water treatment

IR radiation has been studied for micro-organism inactivation of bacterial spores on metal substrates [1] and on metal and paper substrates [2]. A near-point near infrared laser water treatment apparatus for use in dental hand-pieces was also developed [3]. To date water sterilisation research using a mid-IR laser technique is very rare. According to the World Health Organisation [4], examinations for faecal indicator bacteria remain the most sensitive and specific way of assessing the hygienic quality of water. Bacteria that fall into this group are E. coli, other coliform bacteria (including E. cloacae) and to a lesser extent, faecal streptococci [5]. Protozoan cysts from organisms which cause giardiasis are the most frequently identified cause of waterborne diseases in developed countries [6,7]. The use of aerobic bacterial endospores to monitor the efficiency of various water treatments has been shown to provide a reliable and simple indicator of overall performance of water treatment[8,9].The efficacy of IR radiation for water disinfection compared to UV treatment has been further investigated in the present study. In addition FTIR spectroscopy in conjunction with Principle Component Analysis was used to characterise structural changes within the bacterial cells and endospores following IR laser treatment. Changes in carbohydrate content of E. cloacae following IR laser treatment were observed.

An exploration of affine group laws for elliptic curves

Several forms of elliptic curves are suggested for an efficient implementation of Elliptic Curve Cryptography. However, a complete description of the group law has not appeared in the literature for most popular forms. This paper presents group law in affine coordinates for three forms of elliptic curves. With the existence of the proposed affine group laws, stating the projective group law for each form becomes trivial. This work also describes an automated framework for studying elliptic curve group law, which is applied internally when preparing this work.

Composing maternal identities : the living realities of mothers with young adult-children in twenty-first century Australia

There is an abundance of books available on the topic of motherhood and mothering; the majority of these books focus on the vulnerability of babies and young children and the motherwork such vulnerability demands. In particular they focus on what it is right to do in the interests of the child, and particularly his or her growth and development. Such a focus is consistent in Western culture with modern moral frameworks where understandings of goodness have been assimilated to dimensions of human action rather than dimensions of human being, selfhood, or specific forms of life. As Charles Taylor has observed, much modern moral philosophy has focused =on what it is right to do rather than the nature of the good life‘ (1989, 13). The master narratives of motherhood and the prevailing social discourses of intensive1 and sacrificial2 mothering exemplify this view as such narratives and discourses depict =what mothers are expected to do [and] how mothers are supposed to be‘ (Nelson 2001, 140). From such infant/child-focused accounts a canonical maternal identity can be discerned; arguably, it is a restricted one. The majority of these books fail to address questions related to what it means be a mother in particular situated, existing, living realities. For instance, ask a mother with young children what being a mother means to her and she may speak of the challenges she faces balancing paid employment and her role as a mother, or the impact of the demands being made on her time and energy. However, ask a mother with young adult-children3 what being a mother means to her and she may speak in similar tones, but she may also speak in differing tones. For example, a "mature" mother may speak of the "empty nest", the "crowded house" and/or "its revolving front door". She may speak of issues related to the vulnerability of the long term marriage, elder care, or grandparenting, or even disillusionment and disenchantment. The purpose of this research is to explore the identity challenges and prospects of some mothers with young adult-children aged between 18 and 30 years of age in twenty-first century Australia. In interpreting the identity challenges and prospects this particular cohort of mothers encounter in their ordinary, everyday living, a diverse and particular range of maternal experiences.my own included5.have been traced, along with the social and ethical meanings ascribed in them. With an understanding and appreciation of voice as the medium which connects one's inner and outer worlds, this research illuminates the plurality of voices and the multiple layers of meaning in each of these mother's particular living and existing realities. Specifically, this research addresses the narrowly constructed, canonical maternal identity through a critical exploration and reflection on stories, shared in a research context, of the living realities of a group of self-identified "mature", middle-class, Australian mothers with children aged between 18 and 30 years of age6. By appraising the broader familial, historical, social, cultural, institutional, and, importantly, moral contexts in which these mothers are situated, 'thick descriptions' (Geertz 1973, 27)7 of maternal identities, and the challenges and prospects these mothers are negotiating, are provided. In terms of its ethical orientation, the frameworks which support and frame this research reject, repudiate and contest (Nelson 2001) the reduction of ethical concerns to individual or intellectual problems or dilemmas to be solved through the application of a theory derived from reasoned thinking. In dismissing deductive and =theoretical-juridical‘8 approaches, the individualistic orientation entrenched in contemporary Western moral thinking, expressed in the notion of '"what ought I to do" when faced with a problem, issue or dilemma of practical urgency' (Isaacs & Massey 1994, 1), is simultaneously rejected, repudiated and contested (Nelson 2001). In countering such understandings, this research reorients us to the illumination and articulation of who it is good to be, for each of these mothers, in allegiance with those goods which guide and inspire her orientations towards living a good life—a life which embraces and enhances the flourishing of herself and her significant others. With an understanding and appreciation that 'mind is never free of precommitment[—t]here is no innocent eye, nor is there one that penetrates aboriginal reality' (Bruner 1987, 32), this thesis is written with the voices of other interlocutors9. These interlocutors include the voices of my research participants whom I refer to as "research interlocutors", my textual "friends" — those scholars whose work resonates strongly with my orientations—as well as the myriad other voices that speak to mothers, for mothers and about mothers, such as those found in popular and mainstream press and culture. Sometimes these voices resonate; other times dissonance may be heard. In situating this research within these complementary frameworks, this research invites readers to join with me in considering, appreciating and appraising the narrow construction of maternal identity. I seek for this engagement, like the engagements with my research interlocutors, to be 'a meeting of voices, an authentic dialogue that is inclusive of the voices of all concerned participants' (Isaacs 2001, 6). I hope that the voices in this thesis resonate with yours (although, at times, you may feel some dissonance) and that together we can draw closer to the accounting, re-counting and re-stor(y)ing of maternal identities; like concentric circles of witness, the dialogue, ...will thus be expanded rippling into corners where one might both imagine, and least expect. Possibilities, then, are vast; the future exciting (Smith 2007, 397). This research is also shaped and guided by maternal scholarship, a relatively new field of inquiry known as 'motherhood studies' (O'Reilly 2011, xvii) which has its origins within the broader terrain of feminist scholarship. As a work of maternal scholarship, this thesis draws upon and continues the tradition of examining motherhood as it is experienced 'in a social context, as embedded in a political institution: in feminist terms' (Rich 1995, ix). It values mothers, their experiences, their stories, their lives. As such, this research is oriented towards 'matricentric feminism', a particular form of feminist inquiry, politics and theory which is consistent with and receptive to feminist frameworks of care and equal rights (O‘Reilly 2011, 25). A number of complementary conceptual frameworks have been engaged in this research with the thesis presented in three parts: the pre-figurative, configurative and re-configurative. As my particular living experiences provided the initial motivation for this research, an account of the challenges I experienced as a mother with young adult-children are outlined as a Prelude to this thesis. Attention then turns to Part One – Pre-figuring Maternal Identities in which the contextual, conceptual and methodological foundations underpinning this research are explored and outlined. In Chapter One, the prevailing cultural narratives and social discourses supporting and shaping the construction of the canonical maternal identity are outlined. Next, in setting the scholarly context, the critiques — arising from feminist and maternal scholarship — of motherhood as a patriarchal institution, mothering as experience, and mothering as work, are explored. As this research engaged with participants who are embedded in particular middle-class, heterosexual, familial and cultural structures, an exploration of family life cycle theory and main stream media accounts are also incorporated. The terrain in which "mature" mothering within an Australian context is experienced is also outlined, including the notions of "empty nests" and "crowded houses", grandparenting, elder care and women's midlife transition. Chapter Two gives an account of the conceptual ontological, ethical, identity and narrative frameworks underpinning this research. In setting the context for rich interpretations, the characteristics of being human10 are outlined before attention turns to our embodiment and embeddedness in our shared human condition11. From this point, attention then turns to understanding the moral form of human living12. In appreciating the vulnerability inherent in our shared human condition, the ways in which we may experience trouble in our lives is noted. The framing of identity constitution13 as complex, multi-faceted, relationally negotiated and composed is then outlined, followed by an understanding of why narrative is a valuable interpretive tool for interpreting and understanding human experiences. This chapter concludes with an appreciation of the ethical significance of storytelling. The research methodology is then outlined in Chapter Three. The rationale underpinning the adoption of the narrative interviewing technique of in-depth interviewing is explored. In exploring these methodological frameworks, the recruitment and interview processes involved in gathering and interpreting the recorded transcripts of ten Australian mothers with young adult-children are outlined. The method of analysis known as the Listening Guide14 best complements the multi-layered, pluri-vocal nature of narrative accounting. The final section of Chapter Three outlines The Guide, with one mother's recorded transcript used to illustrate this method's step-by-step process. Having gathered an understanding and appreciation of the pluri-vocal, multi-layered nature of narrative and identity constitution, the tone of this thesis changes in Part Two . Configuring Maternal Identities. This section consists of Chapters Four and Five and seeks to find meaning in, and make sense of, the differences and commonalities across these particular accounts. Chapter Four explores the living realities of four Australian mothers with young adult-children: Poppy, Honey, Lily and Heather. In presenting a thick description of these mothers' situated realities, the frameworks.the familial, social, cultural, historical and institutional backgrounds.which have supported and shaped each mother's experiences are illuminated. Simultaneously revealed through these particular accounts are the plurality of goods focusing and moving each mother to the moral form of life, a life of meaning and purpose. The harms challenging some mothers' moral motivations are also revealed in this chapter. Specifically illustrated in Chapter Four are the unique and qualitative differences of particular maternal identity configurations. Chapter Five reveals the commonalities amongst all of the research interlocutors' accounts. This chapter contests the individualistic orientation of many contemporary accounts of motherhood which are aimed at defining or contesting what a "good" mother ought to do. By turning away from such individualistic orientations, the chapter does not seek to define 'the content of obligation' (Taylor 1989, 3) but rather seeks to illuminate and articulate a richer, deeper understanding and appreciation of maternal be-ing and be-coming - that is, who it is good to be, for each of these mothers - in allegiance with those goods that focus and inspire her moral motivations. Part Three - Re-Configuring Maternal Identities, which is comprised of Chapter Six, draws this thesis to a close. In this final chapter, the preconceptions, conditions and aspirations for this mother-centred account of the living realities of a small, local cohort of mothers are reiterated. The insights gathered from the rich, descriptive accounts are illuminated and articulated, and the chapter closes with some suggestions for future research. In a Postlude, I reflect on how this research has been a transformative learning experience in my own life.an experience in which I have been able to not only deeply understand and appreciate the challenges and disorientation I was experiencing but also to identify and reorient my stance in relation to the good. In a practical sense, by offering thick descriptions of the living realities of this cohort of "mature" mothers, this research challenges the canonical maternal identity and questions its relevance for, and effect on, "mature" mothers' identity constitution. By bringing to light the complex existing realities of these particular mothers, this research critiques the canonical maternal identity by illustrating that each mother's life and her identity constitutions are complex, relationally negotiated and composed and that motherhood is an enduring way of being. Through these illustrations, this research engages with and extends understandings of difference feminism. This research, however, not only rejects, repudiates and contests (Nelson 2001) the narrowly defined canonical maternal identity. By illuminating and articulating the goods which shape and inspire these "mature" mothers' motherwork, this research offers a matricentric account which is consistent with and respectful of the particular, situated realities—the broader familial, social, institutional, but most importantly, moral values and frameworks—in which each mother‘s life is embedded and her motherwork oriented. By understanding and appreciating the complex and multiple webs of relationships in which each mother exists, this matricentric re-stor(y)ing of maternal experiences not only understands and appreciates the unique nature of each mother‘s existing realities, it is oriented to the continuing enhancing of the shared pursuit of the good which underpins particular maternal practices and particular maternal ways of being.

Orthopedic bone plates : evolution in structure implementation technique and biomaterial

With many important developments over the last century, nowadays orthopedic bone plate now excels over other types of internal fixators in bone fracture fixation. The developments involve the design, material and implementation techniques of the plates. This paper aims to review the evolution in implementation technique and biomaterial of the orthopedic bone plates. Plates were initially used to fix the underlying bones firmly. Accordingly, Compression plate (CP), Dynamic compression plate (DCP), Limited contact dynamic compression plate (LC-DCP) and Point contact fixator (PC-Fix) were developed. Later, the implementation approach was changed to locking, and the Less Invasive Stabilization System (LISS) plate was introduced as a result. Finally, a combination of both of these approaches has been used by introducing the Locking Compression Plate (LCP). Currently, precontoured LCPs are mainly used for bone fracture fixation. In parallel with structure and implementation techniques, numerous advances have occurred in biomaterials of the plates. Titanium and stainless steel alloys are now the most common biomaterials in production of orthopedic bone plates. However, regarding the biocompatibility, bioactivity and biodegradability characteristics of Mg alloys, Ta alloys, SMAs, carbon fiber composites and bioceramics, these materials are considered as potentially suitable for plates. However, due to poor mechanical properties, they have very limited applications. Therefore, further studies are required in future to solve these problems and make them feasible for heavy-duty bone plates.