Compact 120 TW Ti: sapphire laser system with a high gain final amplifier

A 120TW/36fs laser system based on Ti:sapphire chirped-pulse amplification (CPA) has been successfully established in our lab. The final four pass Ti:sapphire amplifier pumped by an energetic single-shot Nd:YAG-Nd:glass laser was designed and optimized. With 24J/8ns pump energy at 532 nm, 300 mJ/220 ps chirped pulse was amplified to 5.98 J in this amplifier, and a total saturated gain of similar to 20 was achieved. The focused intensity of compressed beam could reach to 10(20) W/cm(2) with the M-2 of similar to 2.0. (c) 2005 Elsevier Ltd. All rights reserved.

Desarrollo de una idea de negocio a partir de un hobby en el Grado en Marketing

Nivel educativo: Grado. Duración (en horas): Más de 50 horas

The role of women in fish processing: handling and marketing in Kainji Lake basin

The study assessed the contribution of women in fish handling, processing and marketing in Kainji Lake basin. Structured questionnaires were administered to three fishing villages selected at random. The fishing villages were Monai, Yuna, Fakun, and New Bussa market. The study revealed that women play vital roles in fisheries activities as producers, assistants to men preservers, traders and financiers. The notable fishing activity performed by women is processing right from the moment the boats or canoes land at sites. Women assist in emptying nets, sorting gutting and cleaning the catch. In most cases their activities involved salting smoking and drying using traditional processing techniques. Women are also involved in storage and marketing of both fresh and smoked fish. In spite of these important contribution, most women in the various fishing communities are illiterates, have little or no say in decision making in areas that affects their livelihood and are regarded as inferior fedex. Culture and religion also has significant impact on their contribution in fishing activities

Inter-stage line ratio of He- and Li-like Ti emissions for the electron temperature measurement

Under coronal conditions, the steady state rate-equations are used to calculate the inter-stage line ratios between Li-like Is(2)2p(P-2(3/2))-> 1s(2)2s -> ((2) S-1/2) and He-like 1s2p (P-1(1))-> 1s(2) (S-1(0)) transitions for Ti in the electronic temperature ranges from 0.1 keV to 20 keV. The results show that the. temperature sensitivities are higher at the electronic temperature less than 5000 eV and the temperature sensitivities will decrease with the increase of electronic temperature.

Conical emission of Ti : sapphire femtosecond laser pulses propagating in water

Conical emission is investigated for Ti:sapphire femtosecond laser pulses propagating in water. The colored rings can be observed in the forward direction due to the constructive and destructive interference of transverse wavevector, which are induced by the spatio-temporal gradient of the free-electron density. With increasing input laser energy, due to filamentation and pulse splitting induced by the plasma created by multiphoton excitation of electrons from the valence band to the conduction band, the on-axis spectrum of the conical emission is widely broadened and strongly modulated with respect to input laser spectrum, and finally remains fairly constant at higher laser energy due to intensity clamping in the filaments.

Generation of 17-TW 23-fs pulses with a two-stage Ti : Sapphire amplifier at repetition rate 10 Hz

We have developed a two-stage Ti:sapphire amplifier system which can produce 17-TW/23-fs pulses at a repetition rate 10 MHz. A birefringent plate is used in the regenerative amplifier to alleviate gain narrowing, while an all-reflective cylindrical-mirror-based pulse stretcher and an acousto-optic programmable dispersive filter (AOPDF) are used to compensate for the higher order dispersion of the system.

Parasitic lasing suppression in high gain femtosecond petawatt Ti: sapphire amplifier

New parasitic lasing suppression techniques are developed and high gain amplification is demonstrated in a petawatt level Ti:sapphire amplifier based on the chirped pulse amplification (CPA) scheme. Cladding the large aperture Ti: sapphire with refractive-index matched liquid doped with absorber suppresses the transverse lasing. The acousto-optic programmable dispersive filter (AOPDF) is used to realize side-lobe suppression in the temporal profile of the compressed pulse. The 800 nm laser output with peak power of 0.89 PW and pulse width of 29.0 fs is demonstrated. (c) 2007 Optical Society of America.

Ground-state energy shifts of H-like Ti under dense and hot plasma conditions

In this study, by adopting the ion sphere model, the self-consistent. field method is used with the Poisson-Boltzmann equation and the Dirac equation to calculate the ground-state energies of H-like Ti at a plasma electron density from 10(22) cm(-3) to 10(24) cm(-3) and the electron temperature from 100 eV to 3600 eV. The ground-state energy shifts of H-like Ti show different trends with the electron density and the electron temperature. It is shown that the energy shifts increase with the increase in the electron density and decrease with the increase in the electron temperature. The energy shifts are sensitive to the electron density, but only sensitive to the low electron temperature. In addition, an accurately fitting formula is obtained to fast estimate the ground-state energies of H-like Ti. Such fitted formula can also be used to estimate the critical electron density of pressure ionization for the ground state of H-like Ti.

Reseña del libro: Marketing práctico para pequeños negocios. Una guía para todos

El libro que se presenta aborda la difícil misión de conjugar el marco conceptual de una disciplina académica como es el Marketing, con su importancia práctica para las pequeñas empresas y negocios como fundamento de su creación, y permanencia en el mercado. Resulta particularmente original e infrecuente, el enfoque que los autores nos trasladan en este libro, en el sentido de proponer una doble perspectiva a tener en cuenta cuando se escribe sobre Marketing, la teoría y la práctica, aspecto no siempre considerado por los libros publicados bajo esta temática. Bajo este enfoque, los autores destinan la primera parte del libro a exponer los conceptos y técnicas de Marketing con una visión rigurosa y asentada sobre los pilares que la investigación científica de esta disciplina académica viene desarrollando desde el pasado S.XX en el área de la economía de empresa. Exponen los elementos que la empresa debe considerar en su reflexión estratégica a largo plazo, y en los pilares del denominado Marketing operativo y la perspectiva táctica. Estas son las claves para que también los pequeños negocios desarrollen un Plan de Marketing como guía de sus actuaciones, que se expone en el último capítulo del libro. Desde el enfoque práctico que se ha dado a esta publicación, hay que destacar que cada capítulo finaliza con un apartado destinado a cuestiones y preguntas para reflexionar sobre los conceptos expuestos. En una disciplina de estas características, tan importante como tener en cuenta un riguroso marco teórico, es necesario explicitar la forma de poder transitar a la realidad particular de cada negocio, y así, adaptar esta técnica de gestión empresarial a nuestro contexto. Los autores han logrado con mucho éxito esta simbiosis, que es fruto de su larga experiencia como profesores e investigadores del Área de Comercialización e Investigación de mercados de la Universidad del País Vasco / Euskal Herriko Unibertsitatea.

Part I. Energy straggling of ^4He below 2.0 MeV in Al, Ni, Au and Pt. Part II. Studies of the Ti-W metallization system on Si

Part I.

In recent years, backscattering spectrometry has become an important tool for the analysis of thin films. An inherent limitation, though, is the loss of depth resolution due to energy straggling of the beam. To investigate this, energy straggling of ⁴He has been measured in thin films of Ni, Al, Au and Pt. Straggling is roughly proportional to square root of thickness, appears to have a slight energy dependence and generally decreases with decreasing atomic number of the adsorber. The results are compared with predictions of theory and with previous measurements. While Ni measurements are in fair agreement with Bohr's theory, Al measurements are 30% above and Au measurements are 40% below predicted values. The Au and Pt measurements give straggling values which are close to one another.

Part II.

MeV backscattering spectrometry and X-ray diffraction are used to investigate the behavior of sputter-deposited Ti-W mixed films on Si substrates. During vacuum anneals at temperatures near 700°C for several hours, the metallization layer reacts with the substrate. Backscattering analysis shows that the resulting compound layer is uniform in composition and contains Ti, Wand Si. The Ti:W ratio in the compound corresponds to that of the deposited metal film. X-ray analyses with Reed and Guinier cameras reveal the presence of the ternary Ti_xW_(1-x)Si₂ compound. Its composition is unaffected by oxygen contamination during annealing, but the reaction rate is affected. The rate measured on samples with about 15% oxygen contamination after annealing is linear, of the order of 0.5 Å per second at 725°C, and depends on the crystallographic orientation of the substrate and the dc bias during sputter-deposition of the Ti-W film.

Au layers of about 1000 Å thickness were deposited onto unreacted Ti-W films on Si. When annealed at 400°C these samples underwent a color change,and SEM micrographs of the samples showed that an intricate pattern of fissures which were typically 3µm wide had evolved. Analysis by electron microprobe revealed that Au had segregated preferentially into the fissures. This result suggests that Ti-W is not a barrier to Au-Si intermixing at 400°C.

I. Reactively sputtered Ti-Si-N thin films for diffusion barrier applications. II. Oxidation, diffusion and crystallization of an amorphous Zr_(60)Al_(15)Ni_(25) alloy.

Films of Ti-Si-N obtained by reactively sputtering a TiSi_2, a Ti_5Si_3, or a Ti_3Si target are either amorphous or nanocrystalline in structure. The atomic density of some films exceeds 10^23 at./cm^3. The room-temperature resistivity of the films increases with the Si and the N content. A thermal treatment in vacuum at 700 °C for 1 hour decreases the resistivity of the Ti-rich films deposited from the Ti_5Si_3 or the Ti_3Si target, but increases that of the Si-rich films deposited from the TiSi_2 target when the nitrogen content exceeds about 30 at. %.

Ti_(34)Si_(23)N_(43) deposited from the Ti_5Si_3 target is an excellent diffusion barrier between Si and Cu. This film is a mixture of nanocrystalline TiN and amorphous SiN_x. Resistivity measurement from 80 K to 1073 K reveals that this film is electrically semiconductor-like as-deposited, and that it becomes metal-like after an hour annealing at 1000 °C in vacuum. A film of about 100 nm thick, with a resistivity of 660 µΩcm, maintains the stability of Si n+p shallow junction diodes with a 400 nm Cu overlayer up to 850 °C upon 30 min vacuum annealing. When used between Si and Al, the maximum temperature of stability is 550 °C for 30 min. This film can be etched in a CF_4/O_2 plasma.

The amorphous ternary metallic alloy Zr_(60)Al_(15)Ni_(25) was oxidized in dry oxygen in the temperature range 310 °C to 410 °C. Rutherford backscattering and cross-sectional transmission electron microscopy studies suggest that during this treatment an amorphous layer of zirconium-aluminum-oxide is formed at the surface. Nickel is depleted from the oxide and enriched in the amorphous alloy below the oxide/alloy interface. The oxide layer thickness grows parabolically with the annealing duration, with a transport constant of 2.8x10^(-5) m^2/s x exp(-1.7 eV/kT). The oxidation rate is most likely controlled by the Ni diffusion in the amorphous alloy.

At later stages of the oxidation process, precipitates of nanocrystalline ZrO_2 appear in the oxide near the interface. Finally, two intermetallic phases nucleate and grow simultaneously in the alloy, one at the interface and one within the alloy.

Effects of TI-299423 on Neuronal Nicotinic Acetylcholine Receptors

Nicotinic acetylcholine receptors (nAChRs) are pentameric, ligand-gated, cation channels found throughout the central and peripheral nervous system, whose endogenous ligand is acetylcholine, but which can also be acted upon by nicotine. The subunit compositions of nAChR determine their physiological and pharmacological properties, with different subunits expressed in different combinations or areas throughout the brain. The behavioral and physiological effects of nicotine are elicited by its agonistic and desensitizing actions selectively on neuronal nAChRs. The midbrain is of particular interest due to its population of nAChRs expressed on dopaminergic neurons, which are important for reward and reinforcement, and possibly contribute to nicotine dependence. The α6-subunit is found on dopaminergic neurons but very few other regions of the brain, making it an interesting drug target. We assayed a novel nicotinic agonist, called TI-299423 or TC299, for its possible selectivity for α6-containing nAChRs. Our goal was to isolate the role of α6-containing nAChRs in nicotine reward and reinforcement, and provide insight into the search for more effective smoking cessation compounds. This was done using a variety of in vitro and behavioral assays, aimed dually at understanding TI-299423’s exact mechanism of action and its downstream effects. Additionally, we looked at the effects of another compound, menthol, on nicotine reward. Understanding how reward is generated in the cholinergic system and how that is modulated by other compounds contributes to a better understand of our complex neural circuitry and provides insight for the future development of therapeutics.

Cambio social y marketing: análisis de grupos sociales emergentes

Este trabajo trata sobre la evolución de factores como la demografía, la cultura, la tecnología y la economía y sus consecuencias en las diferentes sociedades. Los grupos sociales que se acaban creando debido a estos cambios y las estrategias de marketing que tienen que llevar acabo las empresas para adaptarse a estos nuevos grupos sociales. Idioma: castellano.

Comparación de las políticas de marketing aplicadas por la misma empresa en países y análisis de las causas de las diferencias: el caso de Coca Cola

El trabajo consiste en analizar el Marketing Mix (4P’s) de Coca-Cola y comparar sus políticas en otros países. La primera política analizada es el producto, que comienza hablando del envase y sus diferentes tipos. Se ha diferenciado la lata y el idioma, ya que son las partes más características. Por otro lado, se ha analizado el sabor. Se han escogido tres productos y analizado las diferencias que poseen entre sí en distintos países. La distribución se ha separado en 5 puntos. Primero, la distribución en España y los cambios que ha sufrido en los últimos años, así como las consecuencias de estos. El segundo, la distribución en Argentina, seguido de EEUU y China así como, algunos casos excepcionales en el resto del mundo, que tienen una metodología muy particular y característica en la forma de distribución. En cuanto al precio, se ha van a analizar los factores que se estudian a la hora de imponer el precio tales como el PIB y cuáles son los aspectos más relevantes en la toma de decisiones. Y por último la comunicación, donde se muestran diferentes ejemplos a lo largo de toda la vida de Coca-Cola donde se ha visto presente la marca.