Tungiasis in schoolchildren in Criciúma, Santa Catarina State, South Brazil

Tungiasis is a common parasitic skin disease in Brazil, caused by the flea Tunga penetrans. We conducted a cross-sectional study to evaluate the occurrence of infestation with T. penetrans in primary schoolchildren in Criciúma, Santa Catarina State (South Brazil). In total, 917 children (6-10 years) of 68 schools were included in the study (11% of target population). Physical examination was followed by residential visits of those infested, to assess housing conditions and to interview the children's guardians. Of the 917, 15 (1.6%) children were infested with the parasite. The prevalence was twice as high in females (10 children - 2.2%) as compared to males (five children - 1.1%), but due to the low number of infested individuals, the difference was statistically not significant (p = 0.18). The mean number of lesions found was 1.4 per child. One child presented bacterial superinfection. Of the 15 children infested, 10 (66.7%) studied in schools built on pyritiferous soil. The families of 12 children (79.9%) had been living in the area in which the study was conducted for less than eight years and were considered underprivileged families with the head of the household having a low education status. We conclude that in Criciúma tungiasis occurs in primary school children, but prevalence and parasite load are low.

Impairment in the mortagage loan portfolio: The example of Banco Popular portugal

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

The effects of rent control in Lisbon

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Sustainable mortars with incorporation of microencapsulated phase change materials

The construction industry is responsible for high energy and raw materials consumption. Thus, it is important to minimize the high energy consumption by taking advantage of renewable energy sources and reusing industrial waste, decreasing the extraction of natural materials. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. The simultaneous incorporation of PCM and fly ash (FA) can reduce the energy consumption and the amount of materials landfilled. However, the addition of these materials in mortars modifies its characteristics. The main purpose of this study was the production and characterization in the fresh and hardened state of mortars with incorporation of different contents of PCM and FA. The binders studied were aerial lime, hydraulic lime, gypsum and cement. The proportion of PCM studied was 0%, 20%, 40% and 60% of the mass of the sand. The content of fly ash added to the mortars was 0%, 20%, 40% and 60% of the mass of the binder. It was possible to observe that the incorporation of PCM and fly ash in mortars caused differences in properties such as workability, microstructure, water absorption, compressive strength, flexural strength and adhesion.

Materiais de isolamento térmico de edifícios. Para além da energia operacional

The use of thermal insulation materials for the achievement of energy efficient buildings intended, in most cases, the fulfilment of the required heating and cooling needs of the operational phase. The main goal of this paper is â by using exploratory methodology, namely literature review â identify more sustainable insulating materials and, concomitantly, exposing the paradoxical effect of other insulation materials with high Global Warming Potential (GWP) highlighting the role of the Life Cycle Assessment (LCA), Ecodesign and Environmental Product Declaration (EPD) tools for the framing, comparison and selection of materials. As a main conclusion, it is noticed the lack of environmental information from the producers which, together with acquisition prices that do not internalize Life Cycle Costs (LCC), has led to the use of insulation materials with high carbon footprint and to the "isolation paradox" as well.

Arquitetura Flutuante: projetar uma habitação-tipo para um ambiente em transformação

Dissertação de mestrado integrado em Arquitectura

Tradição em continuidade: monitorização das estratégias bioclimáticas das Quintas no Nordeste Transmontano

In recent decades the vernacular architecture has been recognized as an important source of knowledge in the adaptation of construction to the climate and other specific local characteristics. However, the systematized information is still scarce to quantitatively understand the hydrothermal behaviour of bioclimatic strategies identified in previous surveys to this type of architecture. Using the farmsteads in the northeast region of Portugal as a case study, this article presents the results of hygrothermal monitoring carried out during the heating and cooling seasons. The data obtained enabled to verify and quantify the effective performance of the identified bioclimatic strategies, which are presented as opportunities for contemporary architecture.

Thermal technologies in food processing

[Excerpt] Introduction: Thermal processing is probably the most important process in food industry that has been used since prehistoric times, when it was discovered that heat enhanced the palatability and the life of the heat-treated food. Thermal processing comprehends the heating of foods at a defined temperature for a certain length of time. However, in some foods, the high thermotolerance of certain enzymes and microorganisms, their physical properties (e.g.,highviscosity),ortheircomponents(e.g.,solidfractions) require the application of extreme heat treatments that not only are energy intensive, but also will adversely affect the nutritional and organoleptic properties of the food. Technologies such as ohmic heating, dielectric heating (which includes microwave heating and radiofrequency heating), inductive heating, and infrared heating are available to replace, or complement, the traditional heat-dependent technologies (heating through superheated steam, hot air, hot water, or other hot liquid, being the heating achieved either through direct contact with those agents – mostly superheated steam – or through contact with a hot surface which is in turn heated by such agents). Given that the “traditional” heatdependent technologies are thoroughly described in the literature, this text will be mainly devoted to the so-called “novel” thermal technologies. (...)

Exercise stress testing in healthy subjects during cholinergic stimulation after a single dose of pyridostigmine

OBJETIVE: The evaluation, by exercise stress testing, of the cardiorespiratory effects of pyridostigmine (PYR), a reversible acetylcholinesterase inhibitor. METHODS: A double-blind, randomized, cross-over, placebo-controlled comparison of hemodynamic and ventilation variables of 10 healthy subjects who underwent three exercise stress tests (the first for adaptation and determination of tolerance to exercise, the other two after administration of placebo or 45mg of PYR). RESULTS: Heart rate at rest was: 68±3 vs 68±3bpm before and after placebo, respectively (P=0.38); 70±2 vs 59±2bpm, before and after pyridostigmine, respectively (P<0.01). During exercise, relative to placebo: a significantly lower heart rate after PYR at, respectively, 20% (P=0.02), 40% (P=0.03), 80% (P=0.05) and 100% (P=0.02) of peak effort was observed. No significant differences were observed in arterial blood pressure, oxygen consumption at submaximal and maximal effort, exercise duration, respiratory ratio, CO2 production, ventilation threshold, minute ventilation, and oxygen pulse. CONCLUSION: Pyridostigmine, at a dose of 45mg, decreases heart rate at rest and during exercise, with minimal side effects and without interfering with exercise tolerance and ventilation variables.

A Real-Time intelligent system for tracking patient condition

Hospitals have multiple data sources, such as embedded systems, monitors and sensors. The number of data available is increasing and the information are used not only to care the patient but also to assist the decision processes. The introduction of intelligent environments in health care institutions has been adopted due their ability to provide useful information for health professionals, either in helping to identify prognosis or also to understand patient condition. Behind of this concept arises this Intelligent System to track patient condition (e.g. critic events) in health care. This system has the great advantage of being adaptable to the environment and user needs. The system is focused in identifying critic events from data streaming (e.g. vital signs and ventilation) which is particularly valuable for understanding the patient’s condition. This work aims to demonstrate the process of creating an intelligent system capable of operating in a real environment using streaming data provided by ventilators and vital signs monitors. Its development is important to the physician because becomes possible crossing multiple variables in real-time by analyzing if a value is critic or not and if their variation has or not clinical importance.

A produção recente de periferias urbanas africanas

Dissertação para obtenção do grau de Doutor em Urbanismo, apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Thickening of phase change materials (PCM) to avoid segregation

Estudi elaborat a partir d’una estada a Çukurova University, Turquia, al juliol del 2006. L’emmagatzematge d’energia tèrmica ha atret interès en aplicacions tèrmiques com l’aigua calenta, la calefacció i l’aire condicionat. Aquests sistemes són útils per corregir la no coincidència entre la oferta i la demanda d’energia. Principalment hi ha dos tipus de sistemes d’emmagatzematge d’energia tèrmica, emmagatzematge amb calor sensible i amb calor latent. L’emmagatzematge amb calor latent és particularment atractiu degut a la seva habilitat de donar una densitat d’emmagatzematge d’energia més alt i la seva característica d’emmagatzemar calor a una temperatura constant corresponent a la temperatura de transició de fase de la substància emmagatzemadora de calor. Les salts hidratades orgàniques tenen certes avantatges com a materials d’emmagatzematge de calor latent sobre els materials orgànics. En canvi, quan les salts hidratades s’utilitzen com a materials de canvi de fase (PCM) apareixen alguns problemes en les aplicacions d’emmagatzematge de calor latent. Aquests són el subrefredament de les salts hidratades quan es congelen degut a les seves dèbils propietats de nucleació, i la separació de fase que hi apareix degut a una fusió incongruent. En aquest estudi, s’estabilitza sal de Glauber (Na2SO4.10H2O) amb diferents concentracions de poliacrilamida i gelatina per prevenir la fusió incongruent. Per prevenir el subrefredament s’utilitza un agent nucleant amb una estructura cristal•lina semblant a la de la sal de Glauber. La capacitat d’emmagatzematge de calor de les mostres de PCM estabilitzades amb diferents concentracions de gels polimèrics es determinen amb DCS i amb el mètode T-history.

Pédiatrie [Pediatry].

During the previous year, several changes occurred in paediatric patient's management. The new PALS recommendations redefine the rhythm and the rate between cardiac massage and ventilation as well as the indications for defibrillation. The choice of the test for Helicobacter Pylori depends on the age of the patient and on the clinical situation. New anti-hypertensive drugs allow to limit the progression of chronic renal disease with hyper-tension and/or proteinuria. The choice between immunoglobulins, steroids, splenectomy and rituximab to treat chronic thrombocytopenic purpura treatment is a therapeutic challenge. Finally, a new approach is presented for diagnosis and treatment of iron overload in chronic hemoglobinopathies.

A cost-benefit analisys of chagas disease control

Chagas disease transmission can be effetively interrupted by insecticidal control of its triatomine bug vectors. We present here a simple model comparing the costs and benefits of such a programme, designed to eliminate domestic populations of Triatoma infestans throughout its known area of distribution over the seven southernmost countries of Latin America. The model has been simplified to require only four financial estimates relating to the unit cost of housing spraying and benefits due to avoidance of premature death in the acute phase of the disease, avoidance of supportive treatment and care in the chronic phase of the disease, and avoidance of corrective digestive and cardiac surgery. Exceptfor these direct medical costs, al other potential benefits have been ignored. Nevertheless, the model shows that the direct financial benefits of such a programme would far outweigh the costs, and the project would support a remarkably high internal rate of return under the least optimistic estimates.

Briefing Paper on Health Inequalities for Elected Members of Local Government (ROI)

The social and economic circumstances in which people live strongly influence their chances to be healthy.  Factors such as housing, transport, environment, education and employment are just some of the functions of local government that influence health. IPH, in partnership with CAN and Nexus developed a briefing paper to support elected members of local government to ensure that the decision in which they are involved have a positive impact on health, especially the health of vulnerable groups.  It provides councillors with information to assist in contributing to a better quality of life for constituents with healthier decision making in areas such as safer environments, increased education opportunities, better housing stock and improved public transport availability.