Prevalência de hipertensão arterial em militares jovens e fatores associados

OBJETIVO: Estimar a prevalência de hipertensão arterial entre militares jovens e fatores associados. MÉTODOS: Estudo transversal realizado com amostra de 380 militares do sexo masculino de 19 e 35 anos de idade em uma unidade da Força Aérea Brasileira em São Paulo, SP, entre 2000 e 2001. Os pontos de corte para hipertensão foram: >140mmHg para pressão sistólica e > 90mmHg para pressão diastólica. As variáveis estudadas incluíram fatores de risco e de proteção para hipertensão, como características comportamentais e nutricionais. Para análise das associações, utilizou-se regressão linear generalizada múltipla, com família binomial e ligação logarítmica, obtendo-se razões de prevalências com intervalo de 90% de confiança e seleção hierarquizada das variáveis. RESULTADOS: A prevalência de hipertensão arterial foi de 22% (IC 90%: 21;29). No modelo final da regressão múltipla verificou-se prevalência de hipertensão 68% maior entre os ex-fumantes em relação aos não fumantes (IC 90%: 1,13;2,50). Entre os indivíduos com sobrepeso (índice de massa corporal - IMC de 25 a 29kg/m2) e com obesidade (IMC>29kg/m2) as prevalências foram, respectivamente, 75% (IC 90%: 1,23;2,50) e 178% (IC 90%: 1,82;4,25) maiores do que entre os eutróficos. Entre os que praticavam atividade física regular, comparado aos que não praticavam, a prevalência foi 52% menor (IC 90%: 0,30;0,90). CONCLUSÕES: Ser ex-fumante e ter sobrepeso ou obesidade foram situações de risco para hipertensão, enquanto que a prática regular de atividade física foi fator de proteção em militares jovens.

Unconventional metallic behavior and superconductivity in the K-Mo-O system

Transport properties and magnetization measurements of the K(x)MoO(2-delta) (0 <= x <= 0.25) compound are reported. The compound crystallizes in the oxygen deficient MoO(2) monoclinic structure with potassium atoms occupying interstitial positions. An unconventional metallic behavior with power-law temperature dependence is related to a magnetic ordering. Superconducting transition with small volume fraction is also observed near 7 K for a sample with low potassium composition.

Experimental and theoretical study of two-photon absorption in nitrofuran derivatives: Promising compounds for photochemotherapy

We report experimental and theoretical studies of the two-photon absorption spectrum of two nitrofuran derivatives: nitrofurantoine, (1-(5-nitro-2-furfurilideneamine)-hidantoine) and quinifuryl, 2-(5`-nitro-2`-furanyl) ethenyl-4-{N-[4`-(N,N-diethylamino)-1`-methylbutyl]carbamoyl} quinoline. Both molecules are representative of a family of 5-nitrofuran-ethenyl-quinoline drugs that have been demonstrated to display high toxicity to various species of transformed cells in the dark. We determine the two-photon absorption cross-section for both compounds, from 560 to 880 nm, which present peak values of 64 GM for quinifuryl and 20 GM for nitrofurantoine (1 GM = 1 x 10(-50) cm(4).s.photon(-1)). Besides, theoretical calculations employing the linear and quadratic response functions were carried out at the density functional theory level to aid the interpretations of the experimental results. The theoretical results yielded oscillator strengths, two-photon transition probabilities, and transition energies, which are in good agreement with the experimental data. A higher number of allowed electronic transitions was identified for quinifuryl in comparison to nitrofurantoine by the theoretical calculations. Due to the planar structure of both compounds, the differences in the two-photon absorption cross-section values are a consequence of their distinct conjugation lengths. (c) 2011 American Institute of Physics. [doi:10.1063/1.3514911]

Nonlinear spectra of ZnO: reverse saturable, two- and three-photon absorption

We present a broadband (460-980 nm) analysis of the nonlinear absorption processes in bulk ZnO, a large-bandgap material with potential blue-to-UV photonic device applications. Using an optical parametric amplifier we generated tunable 1-kHz repetition rate laser pulses and employed the Z-scan technique to investigate the nonlinear absorption spectrum of ZnO. For excitation wavelengths below 500 nm, we observed reverse saturable absorption due to one-photon excitation of the sample, agreeing with rate-equation modeling. Two-and three-photon absorption were observed from 540 to 980 nm. We also determined the spectral regions exhibiting mixture of nonlinear absorption mechanisms, which were confirmed by photoluminescence measurements. (C) 2010 Optical Society of America

Antimicrobial mechanisms behind photodynamic effect in the presence of hydrogen peroxide

This study describes the use of methylene blue (MB) plus light (photodynamic inactivation, PDI) in the presence of hydrogen peroxide (H(2)O(2)) to kill Staphylococcus aureus, Escherichia coli, and Candida albicans. When H(2)O(2) was added to MB plus light there was an increased antimicrobial effect, which could be due to a change in the type of ROS generated or increased microbial uptake of MB. To clarify the mechanism, the production of ROS was investigated in the presence and absence of H(2)O(2). It was observed that ROS production was almost inhibited by the presence of H(2)O(2) when cells were not present. In addition, experiments using different sequence combinations of MB and H(2)O(2) were performed and MB optical properties inside the cell were analyzed. Spectroscopy experiments suggested that the amount of MB was higher inside the cells when H(2)O(2) was used before or simultaneously with PDI, and ROS formation inside C. albicans cells confirmed that ROS production is higher in the presence of H(2)O(2). Moreover enzymatic reduction of MB by E. coli during photosensitizer uptake to the photochemically inactive leucoMB could be reversed by the oxidative effects of hydrogen peroxide, increasing ROS formation inside the microorganism. Therefore, the combination of a photosensitizer such as MB and H(2)O(2) is an interesting approach to improve PDI efficiency.

A Study on Unconditionally Stable FDTD Methods for the Modeling of Metamaterials

We assess the performance of three unconditionally stable finite-difference time-domain (FDTD) methods for the modeling of doubly dispersive metamaterials: 1) locally one-dimensional FDTD; 2) locally one-dimensional FDTD with Strang splitting; and (3) alternating direction implicit FDTD. We use both double-negative media and zero-index media as benchmarks.

Piezoaeroelastic Modeling and Analysis of a Generator Wing with Continuous and Segmented Electrodes

Unmanned air vehicles (UAVs) and micro air vehicles (MAVs) constitute unique application platforms for vibration-based energy harvesting. Generating usable electrical energy during their mission has the important practical value of providing an additional energy source to run small electronic components. Electrical energy can be harvested from aeroelastic vibrations of lifting surfaces of UAVs and MAVs as they tend to have relatively flexible wings compared to their larger counterparts. In this work, an electromechanically coupled finite element model is combined with an unsteady aerodynamic model to develop a piezoaeroelastic model for airflow excitation of cantilevered plates representing wing-like structures. The electrical power output and the displacement of the wing tip are investigated for several airflow speeds and two different electrode configurations (continuous and segmented). Cancelation of electrical output occurs for typical coupled bending-torsion aeroelastic modes of a cantilevered generator wing when continuous electrodes are used. Torsional motions of the coupled modes become relatively significant when segmented electrodes are used, improving the broadband performance and altering the flutter speed. Although the focus is placed on the electrical power that can be harvested for a given airflow speed, shunt damping effect of piezoelectric power generation is also investigated for both electrode configurations.

An electromechanical finite element model for piezoelectric energy harvester plates

Vibration-based energy harvesting has been investigated by several researchers over the last decade. The goal in this research field is to power small electronic components by converting the waste vibration energy available in their environment into electrical energy. Recent literature shows that piezoelectric transduction has received the most attention for vibration-to-electricity conversion. In practice, cantilevered beams and plates with piezoceramic layers are employed as piezoelectric energy harvesters. The existing piezoelectric energy harvester models are beam-type lumped parameter, approximate distributed parameter and analytical distributed parameter solutions. However, aspect ratios of piezoelectric energy harvesters in several cases are plate-like and predicting the power output to general (symmetric and asymmetric) excitations requires a plate-type formulation which has not been covered in the energy harvesting literature. In this paper. an electromechanically coupled finite element (FE) plate model is presented for predicting the electrical power output of piezoelectric energy harvester plates. Generalized Hamilton`s principle for electroelastic bodies is reviewed and the FE model is derived based on the Kirchhoff plate assumptions as typical piezoelectric energy harvesters are thin structures. Presence of conductive electrodes is taken into account in the FE model. The predictions of the FE model are verified against the analytical solution for a unimorph cantilever and then against the experimental and analytical results of a bimorph cantilever with a tip mass reported in the literature. Finally, an optimization problem is solved where the aluminum wing spar of an unmanned air vehicle (UAV) is modified to obtain a generator spar by embedding piezoceramics for the maximum electrical power without exceeding a prescribed mass addition limit. (C) 2009 Elsevier Ltd. All rights reserved.

Minimizing total tardiness in a stochastic single machine scheduling problem using approximate dynamic programming

This paper addresses the non-preemptive single machine scheduling problem to minimize total tardiness. We are interested in the online version of this problem, where orders arrive at the system at random times. Jobs have to be scheduled without knowledge of what jobs will come afterwards. The processing times and the due dates become known when the order is placed. The order release date occurs only at the beginning of periodic intervals. A customized approximate dynamic programming method is introduced for this problem. The authors also present numerical experiments that assess the reliability of the new approach and show that it performs better than a myopic policy.

Applying complex network theory to the understanding of high-aspect-ratio carbon-filled composites

This work demonstrates that the theoretical framework of complex networks typically used to study systems such as social networks or the World Wide Web can be also applied to material science, allowing deeper understanding of fundamental physical relationships. In particular, through the application of the network theory to carbon nanotubes or vapour-grown carbon nanofiber composites, by mapping fillers to vertices and edges to the gap between fillers, the percolation threshold has been predicted and a formula that relates the composite conductance to the network disorder has been obtained. The theoretical arguments are validated by experimental results from the literature.

The influence of matrix mediated hopping conductivity, filler concentration, aspect ratio and orientation on the electrical response of carbon nanotube/polymer nanocomposites

A model to simulate the conductivity of carbon nanotube/polymer nanocomposites is presented. The proposed model is based on hopping between the fillers. A parameter related to the influence of the matrix in the overall composite conductivity is defined. It is demonstrated that increasing the aspect ratio of the fillers will increase the conductivity. Finally, it is demonstrated that the alignment of the filler rods parallel to the measurement direction results in higher conductivity values, in agreement with results from recent experimental work.

Personalidade e stresse em militares da Força Aérea Portuguesa: diferenças entre género

RESUMO: A organização militar é uma das mais importantes para qualquer , é uma instituição com regras e valores muito bem definidos, em que factores como a personalidade e o stress terão de ser muito bem avaliados para que se possa integrar uma carreira militar. A amostra estudada foi constituída por 200 militares da Força Aérea Portuguesa, com idade compreendidas entre os 19 e os 52 anos sendo a média de idades 26,3 anos (DP= 5,9). Em estudos anteriores verifiou-se que as diferenças entre géneros são uma condicionante no dia-a-dia de um militar (Lorenzi-Cioldi, 1994). Contudo, Eagly (1987), afirma que a diferença entre géneros tem uma pequena percentagem (5%) contra os 95 % de variabilidade explicada por outros factores na vida militar. Com esta investigação pretendeu-se verificar se existem diferenças entre géneros em relação aos factores básicos da personalidade, stress, afectividade e desejabilidade social, para além de outros aspectos relacionados com estes factores. Utilizaram-se as seguintes medidas de avaliação: o Big Five Factory, BFI (Benet-Martínez & John, 1998), a Paulhus Deception Scale, PDS (Paulhus, 1998), a Positive and Negative Affect Shedule, PANAS (Watson, Clark e Tellenger, 1998) e o Daily Stress Inventory, DSI (Brantley e Glenn, 1989). Conclui-se que ao nível da personalidade, nos factores de extroversão e conscienciosidade as mulheres apresentam valores mais elevados que os homens, em relação ao stress, nos factores competências pessoais, factores ambientais e stressores variados as mulheres obtêm valores mais baixos que os homens. ABSTRACT: The military institution is one of the most important in any country, it has very strict rules and values and therefore factors such as personality and stress must be thoroughly evaluated in order to integrate a military career. The sample under study is constituted by 200 militaries of the Portuguese Air Force, with ages between 19 and 52 years old, being the average 26,3 (DP=5,9). From previous studies it is know that differences in gender constitute a special condition in military personnel day to day life (Lorenzi-Cioldi, 1994). On the other hand, Eagly (1987) states that gender differences represents a small percentage (5%) against 95 % of variance explained by other military life factors. The main focus of this investigation was to determine if there were differences in gender in personality, stress, affect, social desirability and also to study other aspects related to these factors. The measures used were: the Big Five Factory, BFI (Benet-Martínez & John, 1998), the Paulhus Deception Scale, PDS (Paulhus, 1998), the Positive and Negative Affect Schedule, PANAS (Watson, Clark e Tellenger, 1998), the Daily Stress Inventory, DSI (Brantley e Glenn, 1998). It was concluded that on the personality level, women present higher scores on factors such as extroversion and consciousness. On the stress level, when considering factors such as personal competences, environmental factors and varied stressors, women present lower scores than men.

Avaliação da implementação de programa de fiabilidade de aeronaves na Força Aérea Portuguesa

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Liquid crystal beads constrained on thin cellulosic fibers: Electric field induced microrotors and N-I transition

We directly visualize the response of nematic liquid crystal drops of toroidal topology threaded in cellulosic fibers, suspended in air, to an AC electric field and at different temperatures over the N-I transition. This new liquid crystal system can exhibit non-trivial point defects, which can be energetically unstable against expanding into ring defects depending on the fiber constraining geometries. The director anchoring tangentially near the fiber surface and homeotropically at the air interface makes a hybrid shell distribution that in turn causes a ring disclination line around the main axis of the fiber at the center of the droplet. Upon application of an electric field, E, the disclination ring first expands and moves along the fiber main axis, followed by the appearance of a stable "spherical particle" object orbiting around the fiber at the center of the liquid crystal drop. The rotation speed of this particle was found to vary linearly with the applied voltage. This constrained liquid crystal geometry seems to meet the essential requirements in which soliton-like deformations can develop and exhibit stable orbiting in three dimensions upon application of an external electric field. On changing the temperature the system remains stable and allows the study of the defect evolution near the nematic-isotropic transition, showing qualitatively different behaviour on cooling and heating processes. The necklaces of such liquid crystal drops constitute excellent systems for the study of topological defects and their evolution and open new perspectives for application in microelectronics and photonics.

Developing and implementing an environmental performance index for the Portuguese military

Business Strategy and the Environment nº 15, p. 71–86