Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications

The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.

Effect of Auger recombination and leakage on the droop in InGaN/GaN quantum well LEDs

We investigate the effect of the epitaxial structure and the acceptor doping profile on the efficiency droop in InGaN/GaN LEDs by the physics based simulation of experimental internal quantum efficiency (IQE) characteristics. The device geometry is an integral part of our simulation approach. We demonstrate that even for single quantum well LEDs the droop depends critically on the acceptor doping profile. The Auger recombination was found to increase stronger than with the third power of the carrier density and has been found to dominate the droop in the roll over zone of the IQE. The fitted Auger coefficients are in the range of the values predicted by atomistic simulations.

Ermittlung der Verlustleistungen in einem Synchron-Tiefsetzsteller mit Niedervolt-GaN-HFETs

Wenn sich in einem wichtigen Bereich der Elektrotechnik ein neues Halbleitermaterial zu etablieren beginnt, weckt dies einerseits Erwartungen der Wirtschaft und Industrie, andererseits kann es eine erhebliche Herausforderung für die Hersteller bedeuten. Nachdem Gallium-Nitrid erstmalig vor 20 Jahren als Transistor verwendet wurde und seit über einer Dekade serienmäßig in der Hochfrequenztechnik eingesetzt wird, erobert es nun die Leistungselektronik. Die ausschlaggebenden Kriterien sind hier die Verwendbarkeit bei höheren Betriebstemperaturen, die Energieeffizienz und die Reduzierung von Größe und Gewicht durch den Betrieb bei höheren Schaltfrequenzen. Die vorliegende Arbeit basiert auf der Motivation zunächst einen möglichst breit angelegten Überblick des ständig wachsenden Angebotsspektrums zu geben, das mittlerweile durch die vielfältigen Varianten der verfügbaren Transistoren an Übersichtlichkeit etwas verloren hat. Nach einer ausführlichen Erläuterung der physikalischen und elektrischen Eigenschaften, werden die jeweiligen Typen in überschaubaren Abschnitten beschrieben und im Anschluss tabellarisch zusammengefasst. Die elektrischen Eigenschaften der hier ausgewählten EPC 2010 eGaN-HFETs (200 V Spannungsklasse) werden eingehend diskutiert. Das Schaltverhalten der eGaN-HFETs in einem Synchron-Tiefsetzsteller wird untersucht und modelliert. Eine Analyse aller in den GaN-FETs entstehenden Verlustleistungen wird durchgeführt. Zur Abschätzung der dynamischen Verlustleistungen wird eine analytische Methode umgesetzt und weiter entwickelt. Um die Vorteile der erhöhten Schaltfrequenzen nutzen zu können, erfolgt eine sehr ausführliche Betrachtung der notwendigen magnetischen Komponenten, deren Auswahl- und Verwendungskriterien im Detail untersucht, evaluiert und aufgegliedert werden. Diese werden im praktischen Teil ausgiebig in Verbindung mit den GaN-Transistoren ausgesucht und messtechnisch bewertet. Theoretische Betrachtungen hinsichtlich der Grenzen, die magnetische Bauelemente schnell schaltenden Halbleitern auferlegen, werden durchgeführt. Da die untersuchten Niedervolt-GaN-HFETs quasi kein Gehäuse haben, ist eine korrekte Strommessung nicht realisierbar. Am praktischen Beispiel eines Synchron-Tiefsetzstellers werden zwei experimentelle Methoden entwickelt, mit deren Hilfe die Verlustleistungen in den EPC 2010 eGaN-HFETs ermittelt werden. Anschließend wird das Verbesserungspotential der GaN-Leistungstransistoren erläutert sowie deren Anwendungsbereiche diskutiert.

Characterization of ZnO Nanorods Grown on GaN Using Aqueous Solution Method

Uniformly distributed ZnO nanorods with diameter 70-100 nm and 1-2μm long have been successfully grown at low temperatures on GaN by using the inexpensive aqueous solution method. The formation of the ZnO nanorods and the growth parameters are controlled by reactant concentration, temperature and pH. No catalyst is required. The XRD studies show that the ZnO nanorods are single crystals and that they grow along the c axis of the crystal plane. The room temperature photoluminescence measurements have shown ultraviolet peaks at 388nm with high intensity, which are comparable to those found in high quality ZnO films. The mechanism of the nanorod growth in the aqueous solution is proposed. The dependence of the ZnO nanorods on the growth parameters was also investigated. While changing the growth temperature from 60°C to 150°C, the morphology of the ZnO nanorods changed from sharp tip (needle shape) to flat tip (rod shape). These kinds of structure are useful in laser and field emission application.

The Effect of Periodic Silane Burst on the Properties of GaN on Si (111) Substrates

The periodic silane burst technique was employed during metalorganic chemical vapor deposition of epitaxial GaN on AlN buffer layers grown on Si (111). Periodic silicon delta doping during growth of both the AlN and GaN layers led to growth of GaN films with decreased tensile stresses and decreased threading dislocation densities, as well as films with improved quality as indicated by x-ray diffraction, micro-Raman spectroscopy, atomic force microscopy, and transmission electron microscopy. The possible mechanism of the reduction of tensile stress and the dislocation density is discussed in the paper.

High Density Single Crystalline GaN Nanodot Arrays Fabricated Using Template-Assisted Selective Growth

High density, uniform GaN nanodot arrays with controllable size have been synthesized by using template-assisted selective growth. The GaN nanodots with average diameter 40nm, 80nm and 120nm were selectively grown by metalorganic chemical vapor deposition (MOCVD) on a nano-patterned SiO2/GaN template. The nanoporous SiO2 on GaN surface was created by inductively coupled plasma etching (ICP) using anodic aluminum oxide (AAO) template as a mask. This selective regrowth results in highly crystalline GaN nanodots confirmed by high resolution transmission electron microscopy. The narrow size distribution and uniform spatial position of the nanoscale dots offer potential advantages over self-assembled dots grown by the Stranski–Krastanow mode.

Growth of ZnO Nanorods on GaN Using Aqueous Solution Method

Uniformly distributed ZnO nanorods with diameter 80-120 nm and 1-2µm long have been successfully grown at low temperatures on GaN by using the inexpensive aqueous solution method. The formation of the ZnO nanorods and the growth parameters are controlled by reactant concentration, temperature and pH. No catalyst is required. The XRD studies show that the ZnO nanorods are single crystals and that they grow along the c axis of the crystal plane. The room temperature photoluminescence measurements have shown ultraviolet peaks at 388nm with high intensity, which are comparable to those found in high quality ZnO films. The mechanism of the nanorod growth in the aqueous solution is proposed. The dependence of the ZnO nanorods on the growth parameters was also investigated. While changing the growth temperature from 60°C to 150°C, the morphology of the ZnO nanorods changed from sharp tip with high aspect ratio to flat tip with smaller aspect ratio. These kinds of structure are useful in laser and field emission application.

Preliminary Characterisation of Low-Temperature Bonded Copper Interconnects for 3-D Integrated Circuits

Three dimensional (3-D) integrated circuits can be fabricated by bonding previously processed device layers using metal-metal bonds that also serve as layer-to-layer interconnects. Bonded copper interconnects test structures were created by thermocompression bonding and the bond toughness was measured using the four-point test. The effects of bonding temperature, physical bonding and failure mechanisms were investigated. The surface effects on copper surface due to pre-bond clean (with glacial acetic acid) were also looked into. A maximum average bond toughness of approximately 35 J/m² was obtained bonding temperature 300 C.

Strained Silicon on Silicon by Wafer Bonding and Layer Transfer from Relaxed SiGe Buffer

We report the creation of strained silicon on silicon (SSOS) substrate technology. The method uses a relaxed SiGe buffer as a template for inducing tensile strain in a Si layer, which is then bonded to another Si handle wafer. The original Si wafer and the relaxed SiGe buffer are subsequently removed, thereby transferring a strained-Si layer directly to Si substrate without intermediate SiGe or oxide layers. Complete removal of Ge from the structure was confirmed by cross-sectional transmission electron microscopy as well as secondary ion mass spectrometry. A plan-view transmission electron microscopy study of the strained-Si/Si interface reveals that the lattice-mismatch between the layers is accommodated by an orthogonal array of edge dislocations. This misfit dislocation array, which forms upon bonding, is geometrically necessary and has an average spacing of approximately 40nm, in excellent agreement with established dislocation theory. To our knowledge, this is the first study of a chemically homogeneous, yet lattice-mismatched, interface.

Maneig de la vegetació i del pasturatge per a la prevenció d'incendis al Cap de Creus

Estudi sobre l'aplicació del pasturatge boví al Parc Natural de Cap de Creus com una possible eina per fer disminuir la biomassa vegetal i així intentar prevenir els incendis forestals i la seva expansió enel territori

Batxillerat: camins cap a la Universitat

El batxillerat és un intens camí que recorre l'estudiant i que en bona part dels casos té com a meta la universitat. En el trajecte hi ha uns quants esculls, com el treball de recerca i la selectivitat. Els joves han de prémer fort l'accelerador si volen assolir la fita consignada. El suport de la família i els professors els pot fer el viatge una mica més fàcil

Cap a una política d'exàmens eficaç dins dels estudis de primer grau acadèmic d'ensenyament: ensenyament primari

La formació de mestre d’ensenyament primari ha desenvolupat el procediment d’avaluació per reconèixer les competències adquirides pels estudiants que entren en el si de l’Escola Superior Catòlica de Lovaina des de 2003. En aquest article se’n descriu l’origen i l’operativitat

Mobilitzant-se cap a la cooperació

L’estiu del 2006 va ser el punt de partida per iniciar un projecte de cooperació amb Nicaragua; 15 alumnes han pogut fer diferents estades en aquest país, cooperant amb el programa ¨Yo si puedo¨ d’entrada i continuant desprès amb la col·laboració amb (la UNAN) per a realitzar el pràcticum d´infermeria. Actualment s’està treballant amb la redacció i signació del conveni amb el ¨Colectivo de Mujeres de Matagalpa¨

Módulo de investigación en el aula. Curso ordinario del CAP 90-91.

Desarrollar una actitud investigadora en los futuros docentes. Situar a la teoría como instrumento al servicio del análisis de las realidades educativas. Un curso del CAP con dos grupos de 25 alumnos cada uno. Un tutor de prácticas para cada seis alumnos. Los alumnos asisten durante dos o tres días a la semana -diez horas aproximadamente- a los centros de prácticas y otros días acuden a las clases de los módulos teóricos y de investigación en el aula una hora cada módulo. Los pasos son: participación intensiva en la práctica. Registro de lo que ocurre en la situación. Reflexión analítica de lo registrado. UUE de Novak y Gowin, 1988. También elaboran algunos materiales. Tabla Aristotélica de invención. Soporte mural para la UUE. Grabación en vídeo de las secciones de puesta en común. Utilizan documentos bibliográficos. Revisión y análisis de los diferentes acontecimientos que han tenido lugar en el módulo de investigación en el aula que se estructuran en torno a secuencias. Dificultades para utilizar de forma comprensiva y constructiva la información teórica. En pocos trabajos se han llegado a formular hipótesis sobre los cambios que se pueden efectuar en una práctica educativa. Falta de experiencia y capacidad técnica para llegar a ser, según algún grupo, más objetivos y rigurosos. Resultados desiguales en los trabajos en equipo. Se puede afirmar que ha sido valioso el módulo porque: ha proporcionado a los alumnos herramientas y estrategias para el proceso de enseñanza-aprendizaje. Ha iniciado una vía de interrelación entre la teoría y la práctica. Ha permitido a los alumnos de prácticas elaborar su propio conocimiento a partir de sus experiencias.

Cap a un model d'estudi comunicatiu del paisatge: Interpretació del factors apropiatiu i vivencial del paisatge com a procés de comunicació intrapersonal

El plantejament inicial d'aquesta investigació parteix de la hipòtesi que assenyala que qualsevol procés d'interacció de l'individu amb el paisatge té connotacions comunicatives que cal destriar i, en aquest sentit, es fa necessari establir uns paràmetres d'anàlisi que permetin interpretar els processos de vivència i d'apropiació del paisatge en clau de manifestació comunicativa i, més concretament, des de la perspectiva de la comunicació intrapersonal