Wettability designing by ZnO periodical surface textures

A facile and effective aqueous chemical synthesis approach towards well control of periodical ZnO textures in large-scale areas is reported, by which considerable adjusting of surface wettability can be realized. With the assistance of polystyrene spheres monolayer template and morphology control agent, we succeeded in preparing a series of ordered ZnO microbowls with different sag height. It was found that the contact angle could be well adjusted by changing geometry of microbowl. Such novel, ordered arrays are expected to exploit the great potentiality in waterproof or self-cleaning micro/nanodevices, and even microfluidic devices. (C) 2010 Elsevier Inc. All rights reserved.

2-C-支链-1,6-脱水吡喃葡萄糖的开环反应及吡喃烯糖的合成研究

在糖化学合成中，1,6-脱水吡喃糖不仅是合成具有生物活性低聚糖、糖共体、抗原、抗体以及天然产物等化合物重要原料，而且还是许多具有生物活性的天然产物的结构单元。同时，它还具有[3,2,1]的双环缩醛结构，使其在糖化学合成中具有高的立体选择性和区域选择性，同时减少了C-1 和C-6 位的保护和去保护的优点。此外，环内的缩醛开环后，又可以相应地在C-1 和C-6 位进行官能团转化以及糖苷化反应。 本文报道了一种新的1,6-脱水吡喃糖的合成方法，并设计合成了2-C-支链-1,6-脱水吡喃葡萄糖1-195、1-197、1-198 以及2-C-支链-6-硫代1,6-脱水吡喃葡萄糖1-225。到目前为止，1,6-脱水糖开环并进行糖苷化反应，存在选择性较差、产率低的缺点。我们发现，在乙腈做溶剂的条件下，NiCl5 能高立体选择性高产率地催化化合物1-195、1-197、1-198 开环并与ROH、RSH 发生糖苷化反应。在NiCl5-乙腈条件下，合成了一系列2-C-支链-α-糖苷和2-C-支链-β-硫代糖苷，并对2-C-支链1,6-脱水吡喃葡萄糖的生成机理以及开环机理进行了探讨。 烯糖在糖化学合成中是重要的起始原料，从Fischer 首次合成烯糖至今，一直不断地有新的合成方法出现。但目前文献报道的方法存在所用试剂有毒、价格贵和操作繁琐等缺点。我们对Fischer-Zach 方法进行了改进， 发现Zn-NaH2PO4-H2O 和Zn-PEG600-H2O 体系都能很好地合成烯糖。该方法具有条件温和、绿色环保、操作简单的优点。在Zn-NaH2PO4 溶液或Zn-PEG600 条件下，以溴代糖为原料，高产率地合成一系列的烯糖。 The 1,6-anhydrohexopyranoses are crucial subunits of myriad bioactive nature products, as well as important syntons of carbohydrate chemistry which have been extensively used to prepare the biologically potential oligosaccharides, glycoconjugates, antibiotics, and structurally varied nature products. Their particular [3.2.1] bicyclic skeleton makes them have high regio- and stereo-control in a variety of reactions, and such structure avoids protecting hydroxyl groups at C1 and C6.Additionally, the cleavage of the internal acetal under acidic conditions could be beneficial for further transformations of functional group and glycosylation of the corresponding pyranosyl sugar at the C6 or C1 site. Herein we developed a novel approach to prepare the 1,6-anhydrohexopyranose, and synthesized the 2-C-branched-1,6-anhydrohexopyranose 1-195, 1-197, 1-198 and 2-C-branched-6-thio-1,6-anhydrohexopyranose 1-225. Until now, glycosylation of 1,6-anhydrohexopyranoses has been limited because of the low yields and low stereoselectivity. In this paper, we found that NiCl5-MeCN system could selectively cleave the ring of 1,6-anhydrohexopyranoses with alcohols and thiols at room temperature in high yields. A series of 2-C-branched-α-glycosides and 2-C-branched-β-thioglycosides have been synthesized via NiCl5-catalyzed. Furthermore, we investigated the formation and ring-opening mechanism of 2-C-acetylmethyl-1,6-anhydrohexopyranose. Glycals are significant starting material in carbohydrate chemistry. After the Fischer-Zach method for forming glucal was reported for the first time, the numerous synthetic methods for glycals have been explored. However, there are several drawbacks in the existing methods, such as the usage of very expensive and toxic reagents, intricate operation, and the influence of acid-sensitive and base-sensitive functional group. We improved the Fischer-Zach method and developed a facile, mild and environmentally benign methodology towards the synthesis of the glycals in Zn-NaH2PO4-H2O or Zn-PEG600-H2O system. Our method involves the treatment of glycosyl bromides with Zn in NaH2PO4 aqueous solution or PEG600-H2O at room temperature, affording various glycals in excellent yields.

Post-steam-treatment of Mo/HZSM-5 catalysts: An alternative and effective approach for enhancing their catalytic performances of methane dehydroaromatization

Post-steam-treatment is a facile and effective method for improving the catalytic performances of Mo/HZSM-5 catalysts in methane dehydroaromatization under nonoxidative conditions. The treatment can enhance the stability of the catalyst and also give a higher methane conversion and a higher yield of light aromatics, as well as a decrease in the formation rate of carbonaceous deposits. (27)Al, (29)Si, and (1)H multinuclear magic angle spinning nuclear magnetic resonance, X-ray photoelectron spectroscopy, X-ray diffraction, X-ray fluorescence spectroscopy, and thermogravimetric analysis measurements as well as catalytic reaction evaluations were employed to conduct comparative studies on the properties of the catalysts before and after the post-steam-treatment. The results revealed that the number of free Bronsted acid sites per unit cell decreased, while more Mo species migrated into the HZSM-5 channels for the 6Mo/HZSM-5 catalysts after the post-steam-treatment. In addition, the average pore diameter was also larger for the post-steam-treated catalysts, and this was advantageous for mass transport of the reaction products. However, a severe post-steam-treatment, i.e., with longer treating time, of the 6Mo/HZSM-5 catalyst will lead to the formation of the Al(2)(MoO(4))(3) phases, which is detrimental to the reaction.

Bonding and correlation analysis of various SiCO isomers

The structural properties for various SiCO isomers in the singlet and triplet states have been investigated using CASSCF methods with a 6-311 +G* basis set and also using three DFT and MP2 with same basis set for those systems except for the linear singlet state. The detailed bonding character is discussed, and the state-state correlations and the isomerization mechanism are also determined. Results indicate that there are four different isomers for each spin state, and for all isomers, the triplet state is more stable than the corresponding singlet state. The most stable is the linear SiCO ((3)Sigma(-)) species and may be refer-red to the ground state. At the CASSCF-MP2(full)/6-311+G* level, the state-state energy separations of the other triplet states relative to the ground state are 43.2 (cyclic), 45.2 (linear SiOC), and 75.6 kcal/mol (linear CSiO), respectively, whereas the triplet-singlet state excitation energies for each configuration are 17.3 (linear SiCO), 2.2 (cyclic SiCO), 10.2 (linear SiOC), and 18.5 kcal/mol (linear CSiO), respectively. SiCo ((3)Sigma(-)) may be classified as silene (carbonylsilene), and its COdelta- moiety possesses CO- property. The dissociation energy of the ground state is 42.5 kcal/mol at the CASSCF-MP2(full)/6-311+G* level and falls within a range of 36.5-41.5 kcal/mol at DFT level, and of 23.7-28.9 kcal/mol at the wave function-correlated level, whereas the vertical IP is 188.8 kcal/mol at the CASSCF-MP2(full)/6-311+G* level and is very close to the first IP of Si atom. Three linear isomers (SiCO, SiOC, and CSiO) have similar structural bonding character. SiOC may be referred to the iso-carbonyl Si instead of the aether compound, whereas the CSiO isomer may be considered as the combination of C (the analogue of Si) with SiO (the analogue of CO). The bonding is weak for all linear species, and the corresponding potential energy surfaces are flat, and thus these linear molecules are facile. Another important isomer is of cyclic structure, it may be considered as the combination of CO with Si by the side pi bond. This structure has the smallest triplet state-singlet state excitation energy (similar to2.2 kcal/mol); the C-O bonds are longer, and the corresponding vibrational frequencies are significantly smaller than those of the other linear species. This cyclic species is not classified as an epoxy compound. State-state correlation analysis and the isomerization pathway searches have indicated that there are no direct correlations among three linear structures for each spin state, but they may interchange by experiencing two transition states and one cyclic intermediate. The easiest pathway is to break the Si-O bond to go to the linear SiCO, but its inverse process is very difficult. The most difficult process is to break the C-O bond and to go to the linear CSiO.

Recent progress in adsorbed stationary phases for capillary electrochromatography

This review surveys the recent progress in the adsorbed stationary phases for capillary electrochromatography (CEC). Adsorption-based methods for preparation of stationary phase are novel approaches in CEC, which allow rapid and facile preparing stationary phases with desirable selectivity onto an open-tubular fused-silica capillary, a baresilica or ion-exchange packed column or a monolithic silica or polymer column. A variety of adsorbing agents have been developed as adsorbed stationary phases, including ionic long-chain surfactant, protein, peptide, amino acid, charged cyclodextrin (CD), basic compound, aliphatic ionene, and ion-exchange latex particle. The adsorbed stationary phases have been applied to separation of neutral, basic and acidic organic compounds, inorganic anions and enantiomers. They have also been applied to on-line sample concentration, fast separation and study of the competitive binding of enantiomers with protein.

Europium complexes immobilization on titania via chemical modification of titanium alkoxide

We report a facile strategy to tether lanthanide complexes to organic-inorganic hybrid titania materials via sol-gel processing by employing chemically modified titanium alkoxide as the precursor where the organic ligand sensitizing the luminescence of lanthanide ions is bonded to titanium.

Efficient and divergent synthesis of cyclophosphamide analogues from 2-arylamino-3-acetyl-5, 6-dihydro-4H-pyrans

A facile and efficient one-pot synthesis of substituted cyclophosphamidic chlorides and their analogues has been developed from readily available enaminones, 2-arylamino-3-acetyl-5,6-dihydro4H-pyrans.

Efficient One-Pot Synthesis of Highly Substituted Thiophene Library from 1,3-Dicarbonyl Compounds

A faccile and efficient one-pot synthesis of highly substituted thiophenes has been developed and employed for the preparation of a small focused library. Treatment of 1,3-dicarbonyl compounds 1 with CS2 in the presence of K2CO3 in DMF at room temperature, followed by stepwise addition of alkyl bromides 2 and methylene active bromides 3, provided via intramolecular cyclization 2,3,4,5-tetrasubstituted thiophenes 4 in yields of 77-94%. This protocol, combining construction and modification of the thiophene ring, increases the structural diversity of final products from readily available materials. A mechanism for the one-pot synthesis of thiophenes of type 4 has been proposed. A small focused library of thiophenes is prepared using the sequential addition of reagents to achieve unique substitution in the 2 and 5 position of the thiophene ring

Efficient synthesis of α-alkylidene-β-lactams via NaOH-promoted intramolecular aza-Michael addition of α-carbamoyl ketene-S,S-acetals in aqueous media

A facile and efficient synthesis of substituted alpha-alkylidene-beta-lactams have been developed via a NaOH-promoted intramolecular aza-Michael addition of alpha-carbamoyl, alpha-(1-chlorovinyl) ketene-S,S-acetals and subsequent nucleophilic vinylic substitution (SNV) reaction in alcoholic aqueous media. (C) 2008 Elsevier Ltd. All rights reserved.

Controllable synthesis of VSB-5 micirospheres and microrods: Growth mechanism and selective hydrogenation catalysis

Nanoporous VSB-5 nickel phosphate molecular sieves with relatively well controllable sizes and morphology of microspheres assembled from nanorods were synthesized at 140 degrees C over a short time in the presence of hexamethylenetetramine (HMT) by a facile hydrothermal method. The pH value, reaction time, and ratio of HMT to NaHPO2-H2O crucially influence the morphology and quality of the final products.

Magnetic control of bioelectrocatalytic processes based on assembled iron oxide particles

A facile magnetic control system was designed in bioelectrocatalytic process based on functionalized iron oxide particles. The iron oxide particles were modified with glucose oxidase, and ferrocene dicarboxylic acid was used as electron transfer mediator. Functionalized iron oxide particles can assemble along the direction of applied magnetic field, and the directional dependence of the assembled iron oxide particles can be utilized for device purposes. We report here how such functionalized magnetic particles are used to modulate the bioelectrocatalytic signal by changing the orientation of the applied magnetic field. (C) 2008 Elsevier B.V. All rights reserved.

Microemulsion-mediated solvothermal synthesis and photoluminescent property of 3D flowerlike MnWO4 micro/nanocomposite structure

Novel three-dimensional (3D) flowerlike MnWO4 micro/nanocomposite structure has been successfully synthesized for the first time. The synthesized products were systematically studied by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) and photoluminescence (PL) spectra. It is found that both reaction time and temperature have significant effects on the morphology of the products.

One-pot synthesis of silver nanoplates and charge-transfer complex nanofibers

We describe a facile one-pot process to synthesize Ag nanoplates by reducing silver nitrate with 3,3',5,5'-tetramethylbenzidine (TMB) at room temperature. The silver nanoplates were highly oriented single crystals with (111) planes as the basal planes. TMB can be readily oxidized to charge-transfer (CT) complex between TMB, as a donor, and (TMB)(2+), as an acceptor. The pi-pi interaction of the neutral amine (TMB) and diiminium structure (dication, TMB2+) result in the formation of one-dimensional CT complex nanofiber.

Synthesis and characterization of 1D Co/CoFe2O4 composites with tunable morphologies

1D Co/CoFe2O4 composites with tunable morphologies were fabricated by a facile solvothermal route in the presence of a surfactant poly(vinylpyrrolidone) (PVP); they may be very attractive for potential applications because of their outstanding soft magnetism.