924 resultados para Estabilidade empregatícia


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este estudo avaliou a estabilidade das alterações dentárias e esqueléticas produzidas pela Expansão Rápida da Maxila Assistida Cirurgicamente (ERMAC), no sentido transversal e vertical. A amostra selecionada para este estudo retrospectivo foi composta de 60 telerradiografias em norma frontal, de 15 pacientes, sendo 6 do sexo masculino e 9 do sexo feminino, com média de idade de 23 anos e 3 meses. Utilizou-se o disjuntor tipo Hyrax e o procedimento cirúrgico foi caracterizado pela osteotomia sagital mediana da maxila e não abordagem da sutura pterigopalatina. O início da ativação ocorreu no terceiro dia pós-operatório, sendo que, os limites para a expansão foram determinados por critérios eminentemente clínicos. Todos os pacientes foram radiografados nas fases pré-expansão (T1), pós-expansão imediata (T2), 3 meses pós- expansão (com o próprio disjuntor como contenção) (T3) e 6 meses pós-expansão (com a placa de acrílico removível como contenção) (T4). Medidas lineares foram obtidas a partir dos traçados cefalométricos gerados por um programa computadorizado (Radiocef Studio 2) e analisadas estatisticamente pelo teste de variância (ANOVA) e Tukey ao nível de 5% de significância. Concluiu-se que a ERMAC produziu um aumento estatisticamente significante, da cavidade nasal, largura maxilar, distância intermolares superiores, de T1 para T2, e que se mantiveram em T3 e T4. A largura facial e as distâncias intermolares inferiores não apresentaram alterações após a ERMAC. Avaliando o comportamento vertical da face, notou-se um aumento da AFAI nos tempos T1 para T2 que, diminuiu após a contenção de 3 meses (T3) e permaneceu estável em T4, embora aumentada se comparada com T1.(AU)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo do presente estudo consistiu em analisar a estabilidade das alterações oclusais em 18 pacientes com má oclusão de Classe II, divisão 1, idade média inicial de 10,77 anos, tratados com o aparelho regulador de função RF-2 durante 18 meses e reavaliados num período de pós-tratamento 7,16 anos, em média. Os 54 modelos de gesso foram avaliados no início do tratamento (T1), no final do tratamento (T2) e decorridos 7,16 anos pós-tratamento (T3). Foram analisadas as alterações transversais e sagitais; o Índice de irregularidade de Little e o Índice de Prioridade de Tratamento (IPT). As alterações ocorridas nos períodos analisados foram verificadas por meio da análise de Variância- ANOVA e, em seguida, pelo teste de comparações múltiplas de Bonferroni, com o valor crítico adotado de 0,05. Os resultados demonstraram que o tratamento com o RF-2 promoveu um aumento transversal estatisticamente significante, tanto no arco dentário superior quanto no inferior, porém, no período pós-tratamento, houve recidiva parcial ou mesmo total deste aumento na maioria das dimensões analisadas. Já o comprimento dos arcos dentários superior e inferior diminuiu durante todo o período avaliado. O Índice de Irregularidade de Little apresentou-se estável durante o tratamento, entretanto aumentou no período pós-tratamento. Além disso, o tratamento com o RF-2 proporcionou uma diminuição estatisticamente significante do IPT, refletindo a eficácia do tratamento realizado uma vez que esta diminuição permaneceu estável no período pós-tratamento. Portanto, o aparelho RF-2 demonstrou ser eficaz na correção dentária da má oclusão de Classe II, divisão 1, com estabilidade dos resultados decorridos 7,16 anos após o tratamento. Porém, em relação ao ganho transversal nos arcos dentários obtido durante o tratamento, houve recidiva parcial ou total de todas as variáveis analisadas.(AU)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo desta pesquisa consistiu em comparar as alterações dentárias, esqueléticas e tegumentares promovidas pelo aparelho de Fränkel-2 com um grupo controle, além de observar a estabilidade desses efeitos promovidos pelo tratamento, num período médio de 7,11 anos pós-tratamento. A amostra compreendeu um total de 90 telerradiografias em norma lateral, sendo 54 telerradiografias provenientes de 18 pacientes tratados com o RF-2 avaliados em três fases (T1:início de tratamento;T2: final de tratamento e T3: pós-tratamento) e 36 telerradiografias de 18 pacientes-controle, observados em dois tempos. Para comparação entre os grupos tratado e controle foi utilizado o teste t de Student não pareado. Já para a análise dos valores do grupo tratado nos três tempos (T1, T2 e T3) foi utilizada a Análise de Variância (ANOVA) a um critério e o teste de Tukey (p<0,05). As principais alterações proporcionadas pelo aparelho RF-2 observadas a partir da comparação do grupo tratado com o controle envolveram efeitos mandibulares, principalmente a protrusão e aumento do comprimento mandibular associado com uma rotação horária, que resultou em uma maior altura facial total (N-Me) e ântero-inferior (AFAI), além de suave rotação anti-horária do plano palatino (SN.PP). Os incisivos superiores retruíram e o inferior vestibularizou. Houve uma distalização relativa dos molares superiores juntamente com a diminuição do overjet , desta forma a convexidade do perfil facial tegumentar melhorou. No período pós-tratamento (T3) observou-se uma estabilidade sagital de maxila (SNA) e mandíbula (SNB), das variáveis do padrão facial, da inclinação do incisivo superior, do ângulo nasolabial e do overjet . A mandíbula e a maxila continuaram a crescer no sentido antero-posterior, juntamente com as alturas faciais Houve também a extrusão de incisivos e molares. Já o plano oclusal e o ângulo goníaco diminuíram na fase pós-tratamento.(AU)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo desta pesquisa constituiu em avaliar, por meio das telerradiografias posteroanteriores, as alterações transversais promovidas pelo aparelho Frankel-2 em pacientes com maloclusão de Classe II, divisão 1, além de verificar a estabilidade das mesmas após um período médio de 7,11 anos pós-tratamento. A amostra compreendeu um total de 45 telerradiografias posteroanteriores provenientes de 15 pacientes tratados com o RF-2, realizadas em três fases: (T1) início do tratamento; (T2) final de tratamento; (T3) pós-tratamento. Foram avaliadas outras 36 telerradiografias posteroanteriores de 18 pacientes não tratados (grupo controle), acompanhados num período correspondente ao tratamento (T1-T2). As telerradiografias foram digitalizadas e foi utilizado o software Radiocef Studio 2 para realizar as mensurações das medidas cefalométricas. Para a comparação entre as alterações ocorridas no grupo tratado e no grupo controle, foi aplicado o teste t não pareado. Já para as modificações nas fases inicial, final e pós-tratamento no grupo tratado, foi empregada a Análise de Variância seguida do teste de comparações múltiplas de Tukey, com o valor crítico de 0,05. Os resultados mostraram que durante o período de tratamento as distâncias intercaninos inferiores e intermolares superiores aumentaram de forma estatisticamente significante. Já as distâncias que representam a largura da cavidade nasal, altura facial inferior, largura mandibular e distância intermolares inferiores não sofreram alterações estatisticamente significantes. No período pós-tratamento, observou-se uma suave redução nas distâncias intercaninos inferiores e intermolares superiores. Porém, considerando-se as alterações ocorridas devido ao crescimento e desenvolvimento transversal dos arcos dentários no período analisado, em que haveria uma redução destas distâncias, provavelmente houve uma estabilidade relativa das alterações dentárias transversais promovidas pelo RF-2. Portanto, pode-se concluir que o RF-2 não possui qualquer efeito esquelético transversal. Contudo, há um aumento das distâncias intermolares superiores e intercaninos inferiores durante o tratamento, que permanece relativamente estável, considerando-se as alterações ocorridas pelo crescimento e desenvolvimento normal dos arcos dentários.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The natural and anthropogenic changes that are occurring at the coastal zone around the world represent the greatest problem to society in this century. This problem becomes more evident due to high density of coastal cities, to growing tourist-estate speculation of those areas and to climate change that tend to trigger and accelerate the erosive processes that operating in the littoral. In this context, it‟s possible perceive ever more a significant increase of problems associated to the coastal erosion and retreat of cliffs in the state of Rio Grande do Norte, where this study area of this search is located. The area is located in the coastal zone of the city of Baía Formosa/RN, in south-eastern coast of Rio Grande do Norte, and has a extension of about 1200 meters along the Porto beach. The main objective of this study is to analyze the stability of these cliffs in this region. Through field investigations, testings and computational analysis using the Finite Element Method and Equilibrium Limit Methods. The area was divided into four sections, and were applied checklists, and also realized characterization tests and direct shear tests with materials obtained along these sections. In this manner, it was found that the segments of cliff in this coastal zone have heights around 4 meters to 14 meters and inclinations of approximately 40° to 90°.However the constituents soils of the cliffs were classified, in general terms in accordance to Unified Soil Classification System (USCS), as clayey sands or silty sands, clays of low plasticity, clayey gravels and poorly graduaded sands. The most variegated and clayey soils belong to base of the cliff. The stability analysis showed that the safety factors ranged in section 01, from 1.92 to 4.93, in the section 02, from 1.00 to 1.43, in the section 03, from 1.36 to 1.75 , and section 04, from 1.00 to 3.64. Thus, the sections 02 and 03 were considered more unstable. However, the section 03 can be considered as the most critical section due to the absence of coastal protection structures and the narrow strip of beach.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Biodegradable microspheres used as controlled release systems are important in pharmaceutics. Chitosan biopolymer represents an attractive biomaterial alternative because of its physicochemical and biological characteristics. Chitosan microspheres are expected to become promising carrier systems for drug and vaccine delivery, especially for non-invasive ways oral, mucosal and transdermal routes. Controlling the swelling rate and swelling capacity of the hydrogel and improving the fragile nature of microspheres under acidic conditions are the key challenges that need to be overcomed in order to enable the exploration of the full pharmaceutical potential use of these microparticles. Many studies have focused on the modification of chitosan microsphere structures with cross-linkers, various polymers blends and new organic-inorganic hybrid systems in order to obtain improved properties. In this work, microspheres made of chitosan and nanosized hydrophobic silica (Aerosil R972) were produced by a method consisting of two steps. First, a preparation of a macroscopically homogeneous chitosan-hydrophobic silica dispersion was prepared followed by spray drying. FTIR spectroscopy, X-ray powder diffraction, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (TEM) were used to characterize the microspheres. Also, the were conducted acid stability, moisture sorption capacity, release properties and biological assays. The chitosan-hydrophobic silica composite microspheres showed improved thermal degradation, lower water affinity, better acid stability and ability to retard rifampicin and propranolol hydrochloride (drug models) release under simulated physiological conditions. In vitro biocompatibility studies indicated low cytotoxicity and low capacity to activate cell production of the pro-inflammatory mediator nitric oxide. The results show here encourage further studies on the use of the new chitosan-hydrophobic silica composite microspheres as drug carrier systems via oral or nasal routes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The coastline from Rio Grande do Norte state is characterized for the presence of dunes and cliffs. The latter consist of slopes with height up to 40 meters and inclinations ranging from 30° to 90° wich horizontal. Thus, this dissertation had as objective the evaluation of the stability of cliff from Ponta do Pirambu in Tibau do Sul/RN, and the realization of a parametric study on the stability of a homogeneous cliff considering as variables the material's cohesion, the cliff height and the slope inclination. The study in Ponta do Pirambu considered yet the possibility of the existence of a colluvial cover with thickness ranging from 0.50 to 5.00 meters. The analyzes were performed by Bishop method, using GEO5 software. In parametric analysis were produced graphics that relate height cliff with the inclination, to safety factors equals to 1.00 and 1.50; besides graphics where it is possible easily get the lowest safety factor as from the cohesion, cliff height and its inclination. It was concluded that these graphs are very useful to preliminary analyzes, for the definition of critical areas in risk mappings in areas of cliffs and for determination of an equation for obtaining the lowest safety factor function of the strength parameters and of slope geometry. Regarding the cliff from Ponta do Pirambu, the results showed that the cliff is subject to superficial landslides located in the points where may there be the presence of colluvium with thicknesses greater than two meters. However, the cliff remains stable presenting the global safety factor equal or superior to 2.50 in the saturated condition.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This thesis was performed in four chapters, at the theoretical level, focused mainly on electronic density. In the first chapter, we have applied an undergraduate minicourse of Diels-Alder reaction in Federal University of Rio Grande do Norte. By using computational chemistry tools students could build the knowledge by themselves and they could associate important aspects of physical-chemistry with Organic Chemistry. In the second chapter, we studied a new type of chemical bond between a pair of identical or similar hydrogen atoms that are close to electrical neutrality, known as hydrogen-hydrogen (H-H) bond. In this study performed with complexed alkanes, provides new and important information about their stability involving this type of interaction. We show that the H-H bond playing a secondary role in the stability of branched alkanes in comparison with linear or less branched isomers. In the third chapter, we study the electronic structure and the stability of tetrahedrane, substituted tetrahedranes and silicon and germanium parents, it was evaluated the substituent effect on the carbon cage in the tetrahedrane derivatives and the results indicate that stronger electron withdrawing groups (EWG) makes the tetrahedrane cage slightly unstable while slight EWG causes a greater instability in the tetrahedrane cage. We showed that the sigma aromaticity EWG and electron donating groups (EDG) results in decrease and increase, respectively, of NICS and D3BIA aromaticity indices. In addition, another factor can be utilized to explain the stability of tetra-tert-butyltetrahedrane as well as HH bond. GVB and ADMP were also used to explain the stability effect of the substituents bonded to the carbon of the tetrahedrane cage. In the fourth chapter, we performed a theoretical investigation of the inhibitory effect of the drug abiraterone (ABE), used in the prostate cancer treatment as CYP17 inhibitor, comparing the interaction energies and electron density of the ABE with the natural substrate, pregnenolone (PREG). Molecular dynamics and docking were used to obtain the CYP1ABE and CYP17-PREG complexes. From molecular dynamics was obtained that the ABE has higher diffusion trend water CYP17 binding site compared to the PREG. With the ONIOM (B3LYP:AMBER) method, we find that the interaction electronic energy of ABE is 21.38 kcal mol-1 more stable than PREG. The results obtained by QTAIM indicate that such stability is due a higher electronic density of interactions between ABE and CYP17

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sorghum (Sorghum bicolor (L.) Moench) is a good alternative to be used as silage, especially in places with water scarcity and high temperatures, due to their morphological and physiological characteristics. The appropriate management, as the ideal seeding time, interferes both productivity and the quality of silage. The work was conducted with the objective of evaluating the agronomic and bromatological performance of varieties and hybrids of silage sorghum and their phenotypic stability in two seasons, season and off-season, in the city of Uberlândia, Minas Gerais. The experiments were performed at Capim Branco Experimental Farm of Federal University of Uberlândia (UFU), located in the referred city. There were two sowing dates in the same experimental area, off-season (March to June 2014) and season (November 2014 to March 2015), and the varieties and hybrids were evaluated in both situations. The design was a randomized block with 25 treatments (hybrids and varieties of sorghum) and three replications. Agronomical and bromatological data were subjected to an analysis of variance; averages were grouped by Scott-Knott test at 5% of probability, through Genes computer program; and to estimate the stability, it was opted for Annicchiarico method. The flowering of cultivars, dry matter productivity, plant height, Acid Detergent Fiber (ADF), Neutral Detergent Fiber (NDF) and Crude Protein (CP) are affected by the environment and the variety. Regarding productivity and quality of the fiber, SF11 variety was superior, independent of the rated environment. In relation to the performance stability of dry matter, the varieties SF15, SF11, SF25, PROG 134 IPA, 1141572, 1141570 and 1141562 were highlighted. For the stability of the quality of fibers (FDA and FDN), the variety 1141562 stood out. The environment reduces the expression of characters “days of flowering”, “plant height” and “productivity of dry matter of hybrids”. From the 25 hybrids analyzed for productivity and stability of dry matter performance, seven were highlighted, regardless of the rated environment: Volumax commercial hybrid and experiments 12F39006, 12F39007, 12F37014, 12F39014, 12F38009 and 12F02006.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

CHAPTER II - This study evaluated the effects of two different types of acute aerobic exercise on the osmotic stability of human erythrocyte membrane and on different hematological and biochemical variables that are associated with this membrane property. The study population consisted of 20 healthy and active men. Participants performed single sessions of two types of exercise. The first session consisted of 60 min of moderate-intensity continuous exercise (MICE). The second session, executed a week later, consisted of high-intensity interval exercise (HIIE) until exhaustion. The osmotic stability of the erythrocyte membrane was represented by the inverse of the salt concentration (1/H50) at the midpoint of the sigmoidal curve of dependence between the absorbance of hemoglobin and the NaCl concentration. The values of 1/H50 changed from 2.29 ± 0.1 to 2.33 ± 0.09 after MICE and from 2.30 ± 0.08 to 2.23 ± 0.12 after HIIE. In MICE has occurred an increase in the mean corpuscular volume, probably due to in vivo lysis of older erythrocytes, with preservation of cells that were larger and more resistant to in vitro lysis. The study showed that a single bout of acute exercise affected the erythrocyte osmotic stability, which increased after MICE and decreased after HIIE.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

CHAPTER 1 - This study histologically evaluated two implant designs: a classic thread design versus another specifically designed for healing chamber formation placed with two drilling protocols. Forty dental implants (4.1 mm diameter) with two different macrogeometries were inserted in the tibia of 10 Beagle dogs, and maximum insertion torque was recorded. Drilling techniques were: until 3.75 mm (regular-group); and until 4.0 mm diameter (overdrillinggroup) for both implant designs. At 2 and 4 weeks, samples were retrieved and processed for histomorphometric analysis. For torque and BIC (bone-to-implant contact) and BAFO (bone area fraction occupied), a general-linear model was employed including instrumentation technique and time in vivo as independent. The insertion torque recorded for each implant design and drilling group significantly decreased as a function of increasing drilling diameter for both implant designs (p<0.001). No significant differences were detected between implant designs for each drilling technique (p>0.18). A significant increase in BIC was observed from 2 to 4 weeks for both implants placed with the overdrilling technique (p<0.03) only, but not for those placed in the 3.75 mm drilling sites (p>0.32). Despite the differences between implant designs and drilling technique an intramembranous-like healing mode with newly formed woven bone prevailed. CHAPTER 2 - The objective of this preliminary histologic study was to determine whether the alteration of drilling protocols (oversized, intermediate, undersized drilling) present different biologic responses at early healing periods of 2 weeks in vivo in a beagle dog model. Ten beagle dogs were acquired and subjected to surgeries in the tibia 2 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.5 mm, 3.75 mm, and 4.0 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical significance was set to 95% level of confidence and the number of dogs was considered as the statistical unit for all comparisons. For the torque and BIC and BAFO, a general linear model was employed including instrumentation technique and time in vivo as independent. Overall, the insertion torque increased as a function of drilling diameter from 4.0 mm, to 3.75 mm, to 3.5 mm, with a significant difference in torque levels between all groups (p<0.001). Statistical assessment of BIC and BAFO showed significantly higher values for the 3.75 mm (recommended) drilling group was observed relative to the other two groups (p<0.001). Different drilling dimensions resulted in variations in insertion torque values (primary stability) and different pattern of healing and interfacial remodeling was observed for the different groups. CHAPTER 3 - The present study evaluated the effect of different drilling dimensions (undersized, regular, and oversized) in the insertion and removal torques of dental implants in a beagle dog model. Six beagle dogs were acquired and subjected to bilateral surgeries in the radii 1 and 3 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.2 mm, 3.5 mm, and 3.8 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical analysis was performed by paired t tests for repeated measures and by t tests assuming unequal variances (all at the 95% level of significance). Overall, the insertion torque and removal torque levels obtained were inversely proportional to the drilling dimension, with a significant difference detected between the 3.2 mm and 3.5 mm relative to the 3.8 mm groups (P < 0.03). Although insertion torque–removal torque paired observations was statis- tically maintained for the 3.5 mm and 3.8 mm groups, a significant decrease in removal torque values relative to insertion torque levels was observed for the 3.2 mm group. A different pattern of healing and interfacial remodeling was observed for the different groups. Different drilling dimensions resulted in variations in insertion torque values (primary stability) and stability maintenance over the first weeks of bone healing.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Since the creation of supersonic vehicles, during the Second World War, the engineers have given special attention to the interaction between the aerodynamic efforts and the structures of the aircrafts due to a highly destructive phenomenon called flutter in aeronautical panel. Flutter in aeronautical panels is a self-excited aeroelastic phenomenon, which can occurs during supersonic flights due to dynamic instability of inertia, elastic and aerodynamic forces of the system. In the flutter condition, when the critical aerodynamic pressure is reached, the vibration amplitudes of the panel become dynamically unstable and increase exponentially with time, affecting significantly the fatigue life of the existing aeronautical components. Thus, in this paper, the interest is to investigate the possibility of reducing the effects of the supersonic aeroelastic instability of rectangular plates by applying passive constrained viscoelastic layers. The rationale for such study is the fact that as the addition of viscoelastic materials provides decreased vibration amplitudes it becomes important to quantify the suppression of plate flutter coalescence modes that can be obtained. Moreover, despite the fact that much research on the suppression of panel flutter has been carried out by using passive, semi-active and active control techniques, very few of them are adapted to deal with the problem of estimating the flutter speeds of viscoelastic systems, since they must conveniently account for the frequency- and temperature-dependent behavior of the viscoelastic material. In this context, two different model of viscoelastic material are developed and applied to the model of sandwich plate by using finite elements. After the presentation of the theoretical foundations of the methodology, the description of a numerical study on the flutter analysis of a three-layer sandwich plate is addressed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Toneladas de pescado são desperdiçadas diariamente aquando do processamento do peixe e o hambúrguer de pata-roxa foi desenvolvido para reaproveitar esse pescado subvalorizado e para ser uma fonte nutricional rica em antioxidantes. No presente trabalho, pretendeu-se comprovar o potencial antioxidante antes e após o tratamento térmico do hambúrguer de pata-roxa, e o potencial citotóxico e antiproliferativo sobre um modelo celular do cancro da mama (MCF-7). Foi também observada a estabilidade do hambúrguer de pata-roxa embalado a vácuo e refrigerado. A extração dos compostos fitoquímicos foi realizada com solventes de polaridade distinta (água, metanol e diclorometano) e com diferentes durações do processo (12h e 24h). O tratamento térmico aplicado foi vinte minutos a 180ºC. O potencial antioxidante foi avaliado pela capacidade de redução do radical livre 1,1-difenil-2-picrilhidrazil (DPPH) e pela capacidade de redução de radicais de oxigénio (ORAC), e através da quantificação total de polifenóis (QTP) pelo método de Folin-Ciocalteu (FC). O potencial citotóxico e antiproliferativo foi avaliado na linha celular MCF-7, cujos resultados foram revelados por ensaios espectrofotométricos (método do brometo de 3- (4,5-dimetiltiazol-2-il)-2,5-difenil tetrazólio (MTT)) e fluorimétricos (método de acetoxi-metil éster de calceína (calceína-AM)). A estabilidade do hambúrguer de pataroxa em vácuo e refrigerado foi avaliada através do estudo microbiológico com metodologias de referência (contagens de “totais” e produtores de sulfureto de hidrogénio (H2S) aeróbios e anaeróbios, esporos de Clostridium sulfitos-redutores, enterobactérias, Escherichia coli e pesquisa de Salmonella spp.), da determinação do índice de ácido tiobarbitúrico (TBA) e da avaliação da cor do hambúrguer pelo sistema CIE-L*a*b*. Os ensaios de DPPH e ORAC comprovaram a atividade antioxidante do extrato de hambúrguer de pata-roxa (metanol, 12h) com 79,5% de redução do DPPH e 8603,01μmol ET/100g para amostras sem tratamento térmico, e 87,4% de redução do DPPH e 2567,27μmol ET/100g para amostras com tratamento térmico. Quanto ao conteúdo fenólico, os extratos (metanol, 12h) revelaram 17,13mg EAG/100g do hambúrguer cru e 31,81mg EAG/100g do hambúrguer cozinhado. A extração de 24 horas não aumentou a quantidade de compostos fitoquímicos presentes no extrato. O hambúrguer apenas revelou ainda um potencial citotóxico in vitro relevante na linha celular MCF-7 (1mg/mL, 24h).Apesar do abuso observado na temperatura de armazenamento em refrigeração (temperatura média de 10,3ºC), o hambúrguer de pata-roxa cru, quando submetido ao embalamento a vácuo, apresentou um aumento no período de vida útil de prateleira de 4 dias relativamente à pata-roxa. Foi detetada a presença de esporos de Clostridium sulfito-redutores e 1,0x101ufc E. coli por 1g de hambúrguer de pata-roxa. Não foi detetada a presença de Salmonella spp. O índice de TBA manteve-se estável, mas o hambúrguer de pata-roxa sofreu uma perda na vivacidade (Cab) e na tonalidade (hab) da cor ao fim de 6 dias em refrigeração. É necessário continuar o estudo para melhorar o novo produto alimentar funcional, mas o presente trabalho permitiu concluir que o hambúrguer de pata-roxa reúne as condições para ter um elevado potencial antioxidante, apresentar maior estabilidade em armazenamento e, em simultâneo, constituir uma solução para o desperdício de pescado.