Consumers’ Demand for Pork Quality: Applying Semantic Network Analysis, May 2006

Abstract Consideration of consumers’ demand for food quality entails several aspects. Quality itself is a complex and dynamic concept, and constantly evolving technical progress may cause changes in consumers’ judgment of quality. To improve our understanding of the factors influencing the demand for quality, food quality must be defined and measured from the consumer’s perspective (Cardello, 1995). The present analysis addresses the issue of food quality, focusing on pork—the food that respondents were concerned about. To gain insight into consumers’ demand, we analyzed their perception and evaluation and focused on their cognitive structures concerning pork quality. In order to more fully account for consumers’ concerns about the origin of pork, in 2004 we conducted a consumer survey of private households. The qualitative approach of concept mapping was used to uncover the cognitive structures. Network analysis was applied to interpret the results. In order to make recommendations to enterprises, we needed to know what kind of demand emerges from the given food quality schema. By establishing the importance and relative positions of the attributes, we find that the country of origin and butcher may be the two factors that have the biggest influence on consumers’ decisions about the purchase of pork.

Controlled dynamic generation of standard 1,6-hexamethylene diisocyanate aerosols

A procedure for the dynamic generation of 1,6-hexamethylene diisocyanate (HDI) aerosol atmospheres of 70 micrograms m-3 (0.01 ppm) to 1.75 mg m-3 (0.25 ppm), based on the precise control of the evaporation of pure liquid HDI and subsequent dilution with air, was developed. The apparatus consisted of a home-made glass nebulizer coupled with a separation stage to exclude non-respirable droplets (greater than 10 microns). The aerosol concentrations were achieved by passing air through the nebulizer at 1.5-4.5 l. min-1 to generate dynamically 0.01-0.25 ppm of diisocyanate in an experimental chamber of 8.55 m3. The distribution of the liquid aerosol was established with an optical counter and the diisocyanate concentration was determined from samples collected in impingers by a high-pressure liquid chromatographic method. The atmospheres generated were suitable for the evaluation both of sampling procedures full scale, and of analytical methods: at 140 micrograms m-3 (0.02 ppm) they remained stable for 15-min provocation tests in clinical asthma, as verified by breath-zone sampling of exposed patients.

Morphostructural analysis of an alpine debris flows catchment: implication for debris supply

Rock slope instabilities are implicitly linked to the supply of sediment and debris recharging channels prone to debris flow. Hence, the incorporation of bedrock structure and terrain morphology can be relevant in the analysis of sediment budget and debris flow hazard assessment. Here, the mode of debris production of the Manival catchment (northern French Alps) is documented by the study of its morphostructural aspects extracted from high resolution DEM. Terrain implication in the process of debris supply is evaluated by: a) A systematic classification of the major morphological units based on the slope gradient that enables a spatial analysis of zones of debris production and deposition. b) A detailed structural analysis performed on DEM in order to identify potential unstable slopes. c) An analysis of the gullies orientation that informs in term of structural control of the sources zones. d) Localisation of high density joints sets that document about whether sources of continuous debris production are controlled by the structural setting of the catchment. These DEM-based indicators can be used as proxies for assessing the influences of the current topography and enable to quantify a degree of susceptibility to mass wasting and hillslope erosion activity. This present contribution suggests some directions for characterizing sediment flux dynamic in small alpine catchment.

Dynamic perceptual mapping

Perceptual maps have been used for decades by market researchers to illuminatethem about the similarity between brands in terms of a set of attributes, to position consumersrelative to brands in terms of their preferences, or to study how demographic and psychometricvariables relate to consumer choice. Invariably these maps are two-dimensional and static. Aswe enter the era of electronic publishing, the possibilities for dynamic graphics are opening up.We demonstrate the usefulness of introducing motion into perceptual maps through fourexamples. The first example shows how a perceptual map can be viewed in three dimensions,and the second one moves between two analyses of the data that were collected according todifferent protocols. In a third example we move from the best view of the data at the individuallevel to one which focuses on between-group differences in aggregated data. A final exampleconsiders the case when several demographic variables or market segments are available foreach respondent, showing an animation with increasingly detailed demographic comparisons.These examples of dynamic maps use several data sets from marketing and social scienceresearch.

Track analysis of the Neotropical Entimini (Coleoptera: Curculionidae: Entiminae)

Track analysis of the Neotropical Entimini (Coleoptera, Curculionidae, Entiminae). Distributional patterns of the species belonging to the tribe Entimini from the Neotropical region were analyzed. Based on a track analysis of 22 species of Entimus, Rhigus, and Phaedropus, for which distributional data were available, two generalized tracks were found. One is located in northern Brazil, corresponding to the Amazonian subregion, and is determined by Phaedropus candidus and Rhigus speciosus. The other is located in southern Brazil, corresponding to the Parana subregion, and is determined by Entimus imperialis, E. excelsus, Phaedropus togatus, Rhigus dejeanii, R. faldermanni, R. horridus, R. lateritus, R. nigrosparsus, and R. tribuloides. The development of the Chacoan subregion is hypothesized to have been the dynamic vicariant event that fragmented the former Amazonian-Parana forest.

Mating triggers dynamic immune regulations in wood ant queens.

Mating can affect female immunity in multiple ways. On the one hand, the immune system may be activated by pathogens transmitted during mating, sperm and seminal proteins, or wounds inflicted by males. On the other hand, immune defences may also be down-regulated to reallocate resources to reproduction. Ants are interesting models to study post-mating immune regulation because queens mate early in life, store sperm for many years, and use it until their death many years later, while males typically die after mating. This long-term commitment between queens and their mates limits the opportunity for sexual conflict but raises the new constraint of long-term sperm survival. In this study, we examine experimentally the effect of mating on immunity in wood ant queens. Specifically, we compared the phenoloxidase and antibacterial activities of mated and virgin Formica paralugubris queens. Queens had reduced levels of active phenoloxidase after mating, but elevated antibacterial activity 7 days after mating. These results indicate that the process of mating, dealation and ovary activation triggers dynamic patterns of immune regulation in ant queens that probably reflect functional responses to mating and pathogen exposure that are independent of sexual conflict.

Dynamic social representations of the 2009 H1N1 pandemic: Shifting patterns of sense-making and blame

We investigate dynamics of public perceptions of the 2009 H1N1 influenza pandemic to understand changing patterns of sense-making and blame regarding the outbreak of emerging infectious diseases. We draw on social representation theory combined with a dramaturgical perspective to identify changes in how various collectives are depicted over the course of the pandemic, according to three roles: heroes, villains and victims. Quantitative results based on content analysis of three cross-sectional waves of interviews show a shift from mentions of distant collectives (e.g., far-flung countries) at Wave 1 to local collectives (e.g., risk groups) as the pandemic became of more immediate concern (Wave 2) and declined (Wave 3). Semi-automated content analysis of media coverage shows similar results. Thematic analyses of the discourse associated with collectives revealed that many were consistently perceived as heroes, villains and victims.

Radar analysis of the life cycle of mesoscale convective systems during the 10 June 2000 event

The 10 June 2000 event was the largest flash flood event that occurred in the Northeast of Spain in the late 20th century, both as regards its meteorological features and its considerable social impact. This paper focuses on analysis of the structures that produced the heavy rainfalls, especially from the point of view of meteorological radar. Due to the fact that this case is a good example of a Mediterranean flash flood event, a final objective of this paper is to undertake a description of the evolution of the rainfall structure that would be sufficiently clear to be understood at an interdisciplinary forum. Then, it could be useful not only to improve conceptual meteorological models, but also for application in downscaling models. The main precipitation structure was a Mesoscale Convective System (MCS) that crossed the region and that developed as a consequence of the merging of two previous squall lines. The paper analyses the main meteorological features that led to the development and triggering of the heavy rainfalls, with special emphasis on the features of this MCS, its life cycle and its dynamic features. To this end, 2-D and 3-D algorithms were applied to the imagery recorded over the complete life cycle of the structures, which lasted approximately 18 h. Mesoscale and synoptic information were also considered. Results show that it was an NS-MCS, quasi-stationary during its stage of maturity as a consequence of the formation of a convective train, the different displacement directions of the 2-D structures and the 3-D structures, including the propagation of new cells, and the slow movement of the convergence line associated with the Mediterranean mesoscale low.

Dynamic changes in brain functional connectivity during concurrent dual-task performance.

This study investigated the spatial, spectral, temporal and functional proprieties of functional brain connections involved in the concurrent execution of unrelated visual perception and working memory tasks. Electroencephalography data was analysed using a novel data-driven approach assessing source coherence at the whole-brain level. Three connections in the beta-band (18-24 Hz) and one in the gamma-band (30-40 Hz) were modulated by dual-task performance. Beta-coherence increased within two dorsofrontal-occipital connections in dual-task conditions compared to the single-task condition, with the highest coherence seen during low working memory load trials. In contrast, beta-coherence in a prefrontal-occipital functional connection and gamma-coherence in an inferior frontal-occipitoparietal connection was not affected by the addition of the second task and only showed elevated coherence under high working memory load. Analysis of coherence as a function of time suggested that the dorsofrontal-occipital beta-connections were relevant to working memory maintenance, while the prefrontal-occipital beta-connection and the inferior frontal-occipitoparietal gamma-connection were involved in top-down control of concurrent visual processing. The fact that increased coherence in the gamma-connection, from low to high working memory load, was negatively correlated with faster reaction time on the perception task supports this interpretation. Together, these results demonstrate that dual-task demands trigger non-linear changes in functional interactions between frontal-executive and occipitoparietal-perceptual cortices.

One minute of grief: Emotional processing in short-term dynamic psychotherapy for adjustment disorder.

OBJECTIVE: Depth of emotional processing has shown to be related to outcome across approaches to psychotherapy. Moreover, a specific emotional sequence has been postulated and tested in several studies on experiential psychotherapy (Pascual-Leone & Greenberg, 2007). This process-outcome study aims at reproducing the sequential model of emotional processing in psychodynamic psychotherapy for adjustment disorder and linking these variables with ultimate therapeutic outcome. METHOD: In this study, 32 patients underwent short-term dynamic psychotherapy. On the basis of reliable clinical change statistics, a subgroup (n = 16) presented with good outcome and another subgroup (n = 16) had a poor outcome in the end of treatment. The strongest alliance session of each case was rated using the observer-rated system Classification of Affective Meaning States. Reliability coefficients for the measure were excellent (κ = .82). RESULTS: Using 1 min as the fine-grained unit of analysis, results showed that the experience of fundamentally adaptive grief was more common in the in-session process of patients with good outcome, compared with those with poor outcomes (χ2 = 6.56, p = .01, d = 1.23). This variable alone predicted 19% of the change in depressive symptoms as measured by the Beck Depression Inventory at the end of treatment. Moreover, sequences of the original model were supported and related to outcome. CONCLUSIONS: These results are discussed within the framework of the sequential model of emotional processing and its possible relevance for psychodynamic psychotherapy. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Combination of MRI and dynamic FET PET for initial glioma grading.

AIM: MRI and PET with 18F-fluoro-ethyl-tyrosine (FET) have been increasingly used to evaluate patients with gliomas. Our purpose was to assess the additive value of MR spectroscopy (MRS), diffusion imaging and dynamic FET-PET for glioma grading. PATIENTS, METHODS: 38 patients (42 ± 15 aged, F/M: 0.46) with untreated histologically proven brain gliomas were included. All underwent conventional MRI, MRS, diffusion sequences, and FET-PET within 3±4 weeks. Performances of tumour FET time-activity-curve, early-to-middle SUVmax ratio, choline / creatine ratio and ADC histogram distribution pattern for gliomas grading were assessed, as compared to histology. Combination of these parameters and respective odds were also evaluated. RESULTS: Tumour time-activity-curve reached the best accuracy (67%) when taken alone to distinguish between low and high-grade gliomas, followed by ADC histogram analysis (65%). Combination of time-activity-curve and ADC histogram analysis improved the sensitivity from 67% to 86% and the specificity from 63-67% to 100% (p < 0.008). On multivariate logistic regression analysis, negative slope of the tumour FET time-activity-curve however remains the best predictor of high-grade glioma (odds 7.6, SE 6.8, p = 0.022). CONCLUSION: Combination of dynamic FET-PET and diffusion MRI reached good performance for gliomas grading. The use of FET-PET/MR may be highly relevant in the initial assessment of primary brain tumours.

Faktorenanalytische Untersuchung und Rehabilitätsbestimmung der statischen und dynamischen Pupillometrie bei Normalpersonen und psychopathologischen Gruppen [Factor analytic study and determination of rehabilitation of static and dynamic pupillometry in normal persons and psychopathologic groups]

Variables measured during static and dynamic pupillometry were factor-analyzed. Following factors were obtained regardless whether investigations were carried out in normals or in psychiatric patients: A static factor, a dynamic factor, a stimulus-specific factor and a restitution-dependent factor. Evaluation of reliability in normals demonstrated a high reliability for the static variables of pupillometry.

Authors', Institutions' and Countries' rankings in regional and urban science : an analysis for nine top international journals from 1991 to 2000

This paper examines the most productive authors, institutions and countries in regional and urban science from 1991 to 2000 using information on published articles (and pages) from a sample of widely recognized journals in this field: ARS, JUE, JRS, IJURR, IRSR, PRS, RSUE, RS and US. We also consider the relation between the country of the institution named in articles and the country in which the journal is published, in order to know if there are a home publication bias in regional and urban science. Analysis was made for the whole decade and by subperiods, this allowed us to make a more dynamic interpretation of the results

Dynamic compact thermal models with multiple power sources: application to an ultrathin chip stacking technology

Whereas numerical modeling using finite-element methods (FEM) can provide transient temperature distribution in the component with enough accuracy, it is of the most importance the development of compact dynamic thermal models that can be used for electrothermal simulation. While in most cases single power sources are considered, here we focus on the simultaneous presence of multiple sources. The thermal model will be in the form of a thermal impedance matrix containing the thermal impedance transfer functions between two arbitrary ports. Eachindividual transfer function element ( ) is obtained from the analysis of the thermal temperature transient at node ¿ ¿ after a power step at node ¿ .¿ Different options for multiexponential transient analysis are detailed and compared. Among the options explored, small thermal models can be obtained by constrained nonlinear least squares (NLSQ) methods if the order is selected properly using validation signals. The methods are applied to the extraction of dynamic compact thermal models for a new ultrathin chip stack technology (UTCS).

Nonlinear inverse dynamic models of gas sensing systems based on chemical sensor arrays for quantitative measurements

Gas sensing systems based on low-cost chemical sensor arrays are gaining interest for the analysis of multicomponent gas mixtures. These sensors show different problems, e.g., nonlinearities and slow time-response, which can be partially solved by digital signal processing. Our approach is based on building a nonlinear inverse dynamic system. Results for different identification techniques, including artificial neural networks and Wiener series, are compared in terms of measurement accuracy.