Advances in thermoplastic pultruded composites

Pultrusion is a versatile continuous high speed production technology allowing the production of fibre reinforced complex profiles. Thermosetting resins are normally used as matrices in the production of structural constant cross section profiles. Although only recently thermoplastic matrices have been used in long and continuous fibre reinforced composites replacing with success thermosetting matrices, the number of their applications is increasing due to their better ecological and mechanical performance. Composites with thermoplastic matrices offers increased fracture toughness, higher impact tolerance, short processing cycle time and excellent environmental stability. They are recyclable, post-formable and can be joined by welding. The use of long/continuous fibre reinforced thermoplastic matrix composites involves, however, great technological and scientific challenges since thermoplastics present much higher viscosity than thermosettings, which makes much difficult and complex the impregnation of reinforcements and consolidation tasks. In this work continuous fibres reinforced thermoplastic matrix towpregs were produced using equipment developed by the Institute for Polymers and Composites (IPC). The processing of the towpregs was made by pultrusion, in a developed prototype equipment existing in the Engineering School of the Polytechnic Institute of Porto (ISEP). Different thermoplastic matrices and fibres raw-materials were used in this study to manufacture pultruded composites for commercial applications (glass and carbon fibre/ polypropylene) and for advanced markets (carbon fibre/Primospire®). To improve the temperature distribution profile in heating die, different modifications were performed. In order to optimize both processes, towpregs production and pultruded composites profiles were analysed to determine the influence of the most relevant processing arameters in the final properties. The final pultruded composite profiles were submitted to mechanical tests to obtain the relevant properties.

Análise de complexidade de programas em ferramentas de apoio à decisão

Dissertação de mestrado em Engenharia de Sistemas

Estudo de revestimentos ativos para o isolamento térmico de edifícios

Dissertação de mestrado em Sustentabilidade do Ambiente Construído

Desenvolvimento de um laboratório pedagógico de vias de comunicação na Universidade do Minho

Dissertação de mestrado integrado em Engenharia Civil

Varões entrançados de material compósito com capacidade de monitorização

Dissertação de mestrado integrado em Engenharia Civil

O direito fundamental à proteção na velhice através dos impostos

Dissertação de mestrado em Direito das Crianças, Família e Sucessões

Formação de professores: uma prática pedagógica frente aos desafios das necessidades educativas especiais: um estudo de caso numa IES Particular em Manaus-Am

Dissertação de mestrado em Educação Especial (área de especialização em Dificuldades de Aprendizagem Específicas)

Left Ventricular Diastolic Function in Essential Hypertensive Patients: Influence of Age and Left Ventricular Geometry

PURPOSE - To evaluate diastolic dysfunction (DD) in essential hypertension and the influence of age and cardiac geometry on this parameter. METHODS - Four hundred sixty essential hypertensive patients (HT) underwent Doppler echocardiography to obtain E/A wave ratio (E/A), atrial deceleration time (ADT), and isovolumetric relaxation time (IRT). All patients were grouped according to cardiac geometric patterns (NG - normal geometry; CR - concentric remodeling; CH- concentric hypertrophy; EH - eccentric hypertrophy) and to age (<40; 40 - 60; >60 years). One hundred six normotensives (NT) persons were also evaluated. RESULTS - A worsening of diastolic function in the HT compared with the NT, including HT with NG (E/A: NT - 1.38±0.03 vs HT - 1.27±0.02, p<0.01), was observed. A higher prevalence of DD occurred parallel to age and cardiac geometry also in the prehypertrophic groups (CR). Multiple regression analysis identified age as the most important predictor of DD (r²=0.30, p<0.01). CONCLUSION - DD was prevalent in this hypertensive population, being highly affected by age and less by heart structural parameters. DD is observed in incipient stages of hypertensive heart disease, and thus its early detection may help in the risk stratification of hypertensive patients.

Mortality from Cardiovascular Diseases in the Elderly: Comparative Analysis of Two Five-year Periods

Background:Cardiovascular diseases are the leading cause of death in Brazil. The better understanding of the spatial and temporal distribution of mortality from cardiovascular diseases in the Brazilian elderly population is essential to support more appropriate health actions for each region of the country.Objective:To describe and to compare geospatially the rates of mortality from cardiovascular disease in elderly individuals living in Brazil by gender in two 5-year periods: 1996 to 2000 and 2006 to 2010.Methods:This is an ecological study, for which rates of mortality were obtained from DATASUS and the population rates from the Brazilian Institute of Geography and Statistics (Instituto Brasileiro de Geografia e Estatística). An average mortality rate for cardiovascular disease in elderly by gender was calculated for each period. The spatial autocorrelation was evaluated by TerraView 4.2.0 through global Moran index and the formation of clusters by the index of local Moran-LISA.Results:There was an increase, in the second 5-year period, in the mortality rates in the Northeast and North regions, parallel to a decrease in the South, South-East and Midwest regions. Moreover, there was the formation of clusters with high mortality rates in the second period in Roraima among females, and in Ceará, Pernambuco and Roraima among males.Conclusion:The increase in mortality rates in the North and Northeast regions is probably related to the changing profile of mortality and improvement in the quality of information, a result of the increase in surveillance and health care measures in these regions.

O método potenciométrico na determinação do H+ trocável em solos

For the determination of exchangeable hydrogen ion in soils, the authors of the presente work made the extraction with normal calcium acetate solution that may have an initial pH between 7 and 8 without altering the amount of hydrogen ion extracted. The extraction was made by shaking 5,0 grams of air dry soil with 100 ml of normal calcium acetate solution, the pH of wich was ascertained to 7,0, 7,5 and 8,0 with acetic acid, in 250 mil conical flasks for 30 minutes in a Wagner shaker (30-40 rpm). The contents of the flasks were then, filtered. A 50 ml aliquot of each of the leachate was titrated with a 0,020 N NaOH solution and the volumes consumed sodium hydroxide were ploted against pH. The titration curves thus obtained showed to be straight lines between pH 8 and 9 and parallel to the curve obtained by the titration of the blank. Two ways of locating the end point of the titration showed to be possible: the use of a pHmeter or titrimeter or the use of phenolphtalein as indicator. When using a pH meter or a titrimeter, the end point may rest in any point between pH 8 and 9, and the volume of sodium hydroxide consumed is found by comparison with a similar curve obtained by the titration of the blank. When using phenolphtalein the calcium acetate solution must have a pH below 8.

Estudos sôbre alimentação mineral do cafeeiro: VIII. Estudo da absorção e da translocação do radiozinco no cafeeiro (Coffea arabica L.)

WATER-CULTURE EXPERIMENTS. Two water-culture experiments were carried out to study the absorption and the translocation of radiozinc in young coffee plants as influenced by two factors, namely, concentration of heavy metals (iron, man ganese, copper and molybdenum) and method of application. Inert zinc was supplied at an uniform rate of 0. 05 p. p. m.; the levels of iron supply were 0, 1.0, and 10.0 p. p.m.; manganese was supplied in three doses 0, 0.5, and 5.0 p. p.m.; copper- 0, 0. 02, and 0. 2 p. p. m.; molybdenum- 0, 0. 01, and 0. 1 p. p. m. When applied to the nutrient solution the activity os the radiozinc (as zinc chloride) was 0. 15 microcuries per plant. In the study of the leaf absorption, Zn65 was supplied at the level of 0. 10 microcuries per plant; in this case the radioative material was brushed either on the lower or on the upper surface or both two pairs of mature leaves. The absorption period was 8 weeks. The radioactivity assay showed the following results: 1 - Among the heavy metals herein investigated the iron concentration did not affect the uptake of the radiozinc; by raising the level of Mn, Cu and Mo ten times, the absorption dropped to 50 per cent and even more when compared with the control plants; when, however, these micronutrients were omitted from the nutrient solution, an increase in the uptake of zinc was registered in the minus Cu treatment only. The effects of high levels of Mn, Cu and Mo probably indicate an interionic competition for a same site on a common binding substance in the cell surface. 2 - The absorption of the radiozinc directly applied to the leaf surface reached levels as high as 8 times that registered when the root uptake took place. Among the three methods of application which have been tried, brushing the lower surface of the leaves proved to be the most effective; this result is easily understood since the stomatal openings of the coffee leaves an preferentially located in the lower surface - in this treatment, about 40 per cent of the activity was absorved and around 12 per cent were translocated either to the old or to the newer organs. Chemical analyses for heavy metals, were carried out only in the plants received Zn65Cl2 in the nutrient solution; the results were as follows; 1 - Control plants had, per 1,000 gm, of dry weight the following amounts in mg.: Zn- 48 in the roots and 29 in the tops; Fe- 165 in the roots and 9 in the tops; Mn- 58 in the roots and 15 in the tops, Cu- 15 in the roots and 1. 2 in the tops; Mo- 2. 8 in the roots and 0. 45 in the tops. 2 - The effect of different levels of micronutrients in the composition of the plants can be summarized as follows: Fe and Zn- when omitted from the nutrient solution, the iron and zinc contents in the roots decreased, no variation being noted in the tops; the higher dosis caused an accumulation in the roots but no apparent effect in the tops; Mn- by omitting this micronutrient a decrease in its content in the roots was noted, where as the concentration in the tops was the same; Mo- no variation in roots and tops contents when molybdenum was omitted; higher dosis of manganese and molybdenum increased the amounts formed both in the roots and in the tops. 3 - The influence of the different concentrations of micronutrients heavy metals on the zinc content of the coffee plants can be described by saying that: Fe and Mo- no marked variation; Mn- no effect when omitted, reduced amount when the high dosis was supplied; Mn- when the plants did not receive manganese the zinc content in roots and tops was the same as in the control plants; a decrease in the zinc content of the total plant occurred when the high dosis was employed; Cu -the situation is similar to that described for manganese. Hence, results showed by the chemical analyses roughly correspond to those of the radioactivity assay; the use of the tracer technique, however, gave best informations along this line. SOIL-POTS EXPERIMENTS. The two types of soils which when selected support the most extensive coffee plantations in the State of São Paulo, Brazil: "arenito de Bauru", a light sandy soil and "terra roxa legitima", a red soil derived from basalt. Besides NPK containing salts, the coffee plants were given two doses of inert zinc (65 and 130 mg ZnCl2 per pot) and radiozinc at a total activity of 10(6) counts/minute. The results of the countings can be summarized as follows: 1 - When plants were grown in "arenito de Bauru" the activity absorbed as per cent of the total activity supplied was not affected by the dosis of inert zinc. The highest value found was around 0. 1 per cent. 2 - For the "terra roxa" plants, the situation is almost the same; there was, however, a slight increase in the absorption of the radiozinc when 130 mgm of ZnClg2 was given: a little above 0. 2 per cent of the activity supplied was absorbed. The results clearly show that the young coffee plants practically did not absorb none of the zinc supplied; two reasons at least could be pointed out to explain such a fact: 1 - Zinc fixation by an exchange with magnesium or by filling holes in the octahedral layer of aluminosilicates, probably kaolinite; 2 - No need for fertilizer zinc in the particular stage of life cycle under which the experiment was set up. The data from chemical analysis are roughly parallel to the above mentioned. When one attempts to compare - by taking data herein reported zinc uptake from nutrient solution, leaf brushing or from fertilizers in the soil, a practical conclusion can be drawn: the control of zinc deficiency in coffee plants should not be done by adding the zinc salts to the soil; in other words: the soil applications used so extensively in other countries seem not to be suitable for our conditions; hence zinc sprays should be used wherever necessary.

Anfíbios Anuros da coleção Adolpho Lutz: III - Hyla claresignata Lutz & B. Lutz, 1939

Hyla claresignata Lutz & Lutz, 1939, is a large species apparently not closely allied to the other known Brazilian hylas. It is characterized by the very small tympanum; the head is short and the snout rounded; the legs are long, the hands and feet unusually large, the latter extensively webbbed. The specific name is derived from the insular, irregular, or roughly triangular, dark spots, with a light halo, found mostly in the dorso-lateral region and on the legs. It belongs to the rain-forest fauna of the Marítime Range. The adult is a bromeliad-dweller and the tadpole rhyacophilous. DESCRIPTION. Vomerine teeth in two separate, oblique, groups, behind the large choanae, parallel to the posterior half of their inner border. Tongue entire, short, very broad and hardly free behind. Snout short, rounded, with distinct canthus rostralis and gradually sloping loreal region. Eye very large and prominent, its horizontal diameter almost equal to the distance between its anterior corner and the tip of the snout. Tympanum very small, less than one third of the diameter of the eye, but distinct, partly covered by a short, heavy ridge. Lateral fingers less than one third webbed; fourth finger slightly longer than the second, just reaching the base of the disk of the third; subarticular tubercles well developed; an angular pollex rudiment, more noticeable in the males. Toes almost completely webbed, the edge of the web inserted at the base of the disk on the third and the fifth; an inner metatarsal tubercle. Skin smooth above, granular beneath, on the throat minutely so. No dermal appendage on the hell. Habit robust, head broader than long, body rather heavy, slightly narrowed in the postaxillary region. Legs long, the tibiotarsal articulation reaching beyond the tip of the snout when adpressed. Type (female): 61 mm. (Fig. 1.) DIAGNOSIS of TADPOLE (by G. Orton). "A large specialized, mountain-stream tadpole, with wide head an elongated, flattened snout, greatly enlarged lips and high tooth formula. Eyes dorsal. Spiracle sinistral, projecting, situated far back on side. Anus dextral. Tooth formula 8/12 to 9/14 in fully grown larvae. Tail with a prominent, vertical dark band across musculature and fins; a second concentration of dark pigment near tip of tail, may or may not form a similar but narrower band. Maximum known total length: 60mm.; head and body length 25mm. (Figs. 6 e 7). For further details see Lutz & Lutz, 1939 and Lutz B. & Orton G. 1946.

Cosa: arqueologia de un enclave comercial mediterráneo. Campaña de 2006

En el marco del proyecto “La ciutat romana de Cosa: arqueologia d’un enclau comercial mediterrani” , autorizado y apoyado por la Soprintendenza Archeologica por la Toscana, entre los dias 4 y 22 de septiembre de 2006 se ha realizado la segunda campaña de intervenciones arqueológicas en la ciudad romana de Cosa (Ansedonia, prov. Grosseto, Itàlia), colonia latina fundada en el 273 aC a unos 120 km. al norte de Roma. De acuerdo a los resultados obtenidos en la campanya del 2005 (localización/verificación de los límites precisos de la ínsula O-P/4-5 mediante la aplicación de técnicas de prospección geofísica completadas con la limpieza, registro y documentación arqueológica de las estructuras localizadas ) los trabajos del 2006 se han orientado hacia la identificación de la organización interna de la dicha ínsula tomando como referente el criptopórtico situado en el extremo N.E., el cual parece constituir el límite de una estructura singular (privada o pública ) estratégicamente ubicada en relación al fórum i a la Via Sacra. El trabajo de campo ha consistido en un intenso decapage con la finalidad de delimitar unidades de habitación complejas funcionalmente definidas y así la articulación existente entre ellas; en este sentido se ha podido documentar evidencias del espacio porticado superpuesto al criptopórtico así como, paralelamente a la calle 5 y en dirección a la Via Sacra, parte de habitaciones algunas de las cuales conservaban restos del pavimiento original, en un caso de mosaico. Paralelamente, se ha realizado el análisis en laboratorio de los materiales recuperados los cuales, aún procediendo de nivel superficial, empiezan a proporcionar datos sobre los diferentes momentos de ocupación de la zona, básicamente tardorepublicanos y augustales.

The tectonically controlled emplacement of a vertically sheeted gabbro-pyroxenite intrusion: Feeder-zone of an ocean-island volcano (Fuerteventura, Canary Islands)

The Miocene PX1 gabbro-pyroxenite pluton, Fuerteventura, Canary Islands, is a 3.5 x 5.5 km shallow-level intrusion (0.15-0.2 GPa and 1100-1120 degrees C), interpreted as the feeder-zone to an ocean-island volcano. It displays a vertical magmatic banding expressed in five 50 to 100 metre-wide NNE-SSW trending alkaline gabbro sequences alternating with pyroxenites. This emplacement geometry was controlled by brittle to ductile shear zones, generated by a regional E-W extensional tectonic setting that affected Fuerteventura during the Miocene. At a smaller scale, the PX1 gabbro and pyroxenite bands consist of metre-thick differentiation units, which suggest emplacement by periodic injection of magma pulses as vertical dykes that amalgamated, similarly to a sub-volcanic sheeted dyke complex. Individual dykes underwent internal differentiation following a solidification front parallel to the dyke edges. This solidification front may have been favoured by a significant lateral/horizontal thermal gradient, expressed by the vertical banding in the gabbros, the fractionation asymmetry within individual dykes and the migmatisation of the wall rocks. Pyroxenitic layers result from the fractionation and accumulation of clinopyroxene +/- olivine +/- plagioclase crystals from a mildly alkaline basaltic liquid. They are interpreted as truncated differentiation sequences, from which residual melts were extracted at various stages of their chemical evolution by subsequent dyke intrusions, either next to or within the crystallising unit. Compaction and squeezing of the crystal mush is ascribed to the incoming and inflating magma pulses. The expelled interstitial liquid was likely collected and erupted along with the magma flowing through the newly injected dykes. Clinopyroxene mineral orientation - as evidenced by EBSD and micro X-ray tomography investigations - displays a marked pure-shear component, supporting the interpretation of the role of compaction in the generation of the pyroxenites. Conversely, gabbro sequences underwent minor melt extraction and are believed to represent crystallised coalesced magma batches emplaced at lower rates at the end of eruptive cycles. Clinopyroxene orientations in gabbros record a simple shear component suggesting syn-magmatic deformation parallel to observed NNE-SSW trending shear zones induced by the regional tensional stress field. This emplacement model implies a crystallisation time of 1 to 5 years for individual dykes, consistent with PX1 emplacement over less than 0.5 My. A minimum amount of approximately 150 km(3) of magma is needed to generate the pluton, part of it having been erupted through the Central Volcanic Centre of Fuerteventura. If the regional extensional tectonic regime controls the PX1 feeder-zone initiation and overall geometry, rates and volumes of magma depend on other, source-related factors. High injection rates are likely to induce intrusion growth rates larger than could be accommodated by the regional extension. In this case, dyke intrusion by propagation of a weak tip, combined with the inability of magma to circulate through previously emplaced and crystallised dykes could result in an increase of non-lithostatic pressure on previously emplaced mushy dyke walls; thus generating strong pure-shear compaction within the pluton feeder-zone and interstitial melt expulsion. These compaction-dominated processes are recorded by the cumulitic pyroxenite bands. (C) 2010 Elsevier B.V. All rights reserved.

Phenotypic consequences of copy number variation: insights from Smith-Magenis and Potocki-Lupski syndrome mouse models.

A large fraction of genome variation between individuals is comprised of submicroscopic copy number variation of genomic DNA segments. We assessed the relative contribution of structural changes and gene dosage alterations on phenotypic outcomes with mouse models of Smith-Magenis and Potocki-Lupski syndromes. We phenotyped mice with 1n (Deletion/+), 2n (+/+), 3n (Duplication/+), and balanced 2n compound heterozygous (Deletion/Duplication) copies of the same region. Parallel to the observations made in humans, such variation in gene copy number was sufficient to generate phenotypic consequences: in a number of cases diametrically opposing phenotypes were associated with gain versus loss of gene content. Surprisingly, some neurobehavioral traits were not rescued by restoration of the normal gene copy number. Transcriptome profiling showed that a highly significant propensity of transcriptional changes map to the engineered interval in the five assessed tissues. A statistically significant overrepresentation of the genes mapping to the entire length of the engineered chromosome was also found in the top-ranked differentially expressed genes in the mice containing rearranged chromosomes, regardless of the nature of the rearrangement, an observation robust across different cell lineages of the central nervous system. Our data indicate that a structural change at a given position of the human genome may affect not only locus and adjacent gene expression but also "genome regulation." Furthermore, structural change can cause the same perturbation in particular pathways regardless of gene dosage. Thus, the presence of a genomic structural change, as well as gene dosage imbalance, contributes to the ultimate phenotype.