993 resultados para Cerca
Resumo:
Atualmente, a poluição atmosférica constitui uma das principais causas ambientais de mortalidade. Cerca de 30% da população europeia residente em áreas urbanas encontra-se exposta a níveis de poluição atmosférica superiores aos valores- limite de qualidade do ar legislados para proteção da saúde humana, representando o tráfego rodoviário uma das principais fontes de poluição urbana. Além dos poluentes tradicionais avaliados em áreas urbanas, os poluentes classificados como perigosos para a saúde (Hazard Air Pollutants - HAPs) têm particular relevância devido aos seus conhecidos efeitos tóxicos e cancerígenos. Neste sentido, a avaliação da exposição tornase primordial para a determinação da relação entre a poluição atmosférica urbana e efeitos na saúde. O presente estudo tem como principal objetivo o desenvolvimento e implementação de uma metodologia para avaliação da exposição individual à poluição atmosférica urbana relacionada com o tráfego rodoviário. De modo a atingir este objetivo, foram identificados os parâmetros relevantes para a quantificação de exposição e analisados os atuais e futuros potenciais impactos na saúde associados com a exposição à poluição urbana. Neste âmbito, o modelo ExPOSITION (EXPOSure model to traffIc-relaTed aIr pOllutioN) foi desenvolvido baseado numa abordagem inovadora que envolve a análise da trajetória dos indivíduos recolhidas por telemóveis com tecnologia GPS e processadas através da abordagem de data mining e análise geoespacial. O modelo ExPOSITION considera também uma abordagem probabilística para caracterizar a variabilidade dos parâmetros microambientais e a sua contribuição para exposição individual. Adicionalmente, de forma a atingir os objetivos do estudo foi desenvolvido um novo módulo de cálculo de emissões de HAPs provenientes do transporte rodoviário. Neste estudo, um sistema de modelação, incluindo os modelos de transporteemissões- dispersão-exposição, foi aplicado na área urbana de Leiria para quantificação de exposição individual a PM2.5 e benzeno. Os resultados de modelação foram validados com base em medições obtidas por monitorização pessoal e monitorização biológica verificando-se uma boa concordância entre os resultados do modelo e dados de medições. A metodologia desenvolvida e implementada no âmbito deste trabalho permite analisar e estimar a magnitude, frequência e inter e intra-variabilidade dos níveis de exposição individual, bem como a contribuição de diferentes microambientes, considerando claramente a sequência de eventos de exposição e relação fonte-recetor, que é fundamental para avaliação dos efeitos na saúde e estudos epidemiológicos. O presente trabalho contribui para uma melhor compreensão da exposição individual em áreas urbanas, proporcionando novas perspetivas sobre a exposição individual, essenciais na seleção de estratégias de redução da exposição à poluição atmosférica urbana, e consequentes efeitos na saúde.
Resumo:
The Minho River, situated 30 km south of the Rias Baixas is the most important freshwater source flowing into the Western Galician Coast (NW of the Iberian Peninsula). This discharge is important to determine the hydrological patterns adjacent to its mouth, particularly close to the Galician coastal region. The buoyancy generated by the Minho plume can flood the Rias Baixas for long periods, reversing the normal estuarine density gradients. Thus, it becomes important to analyse its dynamics as well as the thermohaline patterns of the areas affected by the freshwater spreading. Thus, the main aim of this work was to study the propagation of the Minho estuarine plume to the Rias Baixas, establishing the conditions in which this plume affects the circulation and hydrographic features of these coastal systems, through the development and application of the numerical model MOHID. For this purpose, the hydrographic features of the Rias Baixas mouths were studied. It was observed that at the northern mouths, due to their shallowness, the heat fluxes between the atmosphere and ocean are the major forcing, influencing the water temperature, while at the southern mouths the influence of the upwelling events and the Minho River discharge were more frequent. The salinity increases from south to north, revealing that the observed low values may be caused by the Minho River freshwater discharge. An assessment of wind data along the Galician coast was carried out, in order to evaluate the applicability of the study to the dispersal of the Minho estuarine plume. Firstly, a comparative analysis between winds obtained from land meteorological stations and offshore QuikSCAT satellite were performed. This comparison revealed that satellite data constitute a good approach to study wind induced coastal phenomena. However, since the numerical model MOHID requires wind data with high spatial and temporal resolution close to the coast, results of the forecasted model WRF were added to the previous study. The analyses revealed that the WRF model data is a consistent tool to obtain representative wind data near the coast, showing good results when comparing with in situ wind observations from oceanographic buoys. To study the influence of the Minho buoyant discharge influence on the Rias Baixas, a set of three one-way nested models was developed and implemented, using the numerical model MOHID. The first model domain is a barotropic model and includes the whole Iberian Peninsula coast. The second and third domains are baroclinic models, where the second domain is a coarse representation of the Rias Baixas and adjacent coastal area, while the third includes the same area with a higher resolution. A bi-dimensional model was also implemented in the Minho estuary, in order to quantify the flow (and its properties) that the estuary injects into the ocean. The chosen period for the Minho estuarine plume propagation validation was the spring of 1998, since a high Minho River discharge was reported, as well as favourable wind patterns to advect the estuarine plume towards the Rias Baixas, and there was field data available to compare with the model predictions. The obtained results show that the adopted nesting methodology was successful implemented. Model predictions reproduce accurately the hydrodynamics and thermohaline patterns on the Minho estuary and Rias Baixas. The importance of the Minho river discharge and the wind forcing in the event of May 1998 was also studied. The model results showed that a continuous moderate Minho River discharge combined with southerly winds is enough to reverse the Rias Baixas circulation pattern, reducing the importance of the occurrence of specific events of high runoff values. The conditions in which the estuarine plume Minho affects circulation and hydrography of the Rias Baixas were evaluated. The numerical results revealed that the Minho estuarine plume responds rapidly to wind variations and is also influenced by the bathymetry and morphology of the coastline. Without wind forcing, the plume expands offshore, creating a bulge in front of the river mouth. When the wind blows southwards, the main feature is the offshore extension of the plume. Otherwise, northward wind spreads the river plume towards the Rias Baixas. The plume is confined close to the coast, reaching the Rias Baixas after 1.5 days. However, for Minho River discharges higher than 800 m3 s-1, the Minho estuarine plume reverses the circulation patterns in the Rias Baixas. It was also observed that the wind stress and Minho River discharge are the most important factors influencing the size and shape of the Minho estuarine plume. Under the same conditions, the water exchange between Rias Baixas was analysed following the trajectories particles released close to the Minho River mouth. Over 5 days, under Minho River discharges higher than 2100 m3 s-1 combined with southerly winds of 6 m s-1, an intense water exchange between Rias was observed. However, only 20% of the particles found in Ria de Pontevedra come directly from the Minho River. In summary, the model application developed in this study contributed to the characterization and understanding of the influence of the Minho River on the Rias Baixas circulation and hydrography, highlighting that this methodology can be replicated to other coastal systems.
Resumo:
The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.
Resumo:
Este trabalho de investigação foi realizado com o objetivo geral de se descobrir quais são os Fatores Críticos de Sucesso e os aspectos chaves de qualidade e sustentabilidade, a serem considerados no ensino de Engenharia de Produção em um IES privada no Brasil. No presente estudo de caso executou-se uma revisão teórica sistemática nas áreas temáticas da pesquisa, que propiciou a criação de um framework que define os 7 Fatores Críticos de Sucesso ao ensino de Engenharia de Produção, apontando sua divisão nas áreas de qualidade e sustentabilidade, e, por fim, a subdivisão em 6 subáreas de ações operacionais a serem consideradas pela gestão de IES para alcançar melhorias de desempenho em suas atividades. Posteriormente ao levantamento teórico, foi realizado o estudo de caso propriamente dito, que dividiu-se em duas etapas, uma qualitativa e uma quantitativa. Na primeira elaborou-se um roteiro de entrevista em profundidade aplicada a um terço do corpo docente do curso em estudo, captando a impressão destes sobre as temáticas em estudo voltadas à execução de suas atividades. Os dados obtidos foram organizados com o auxílio do software WebQDA, gerando ideias do que deve ser trabalhado para melhorar as condições e resultados do referido curso. A etapa quantitativa foi iniciada com a elaboração de um questionário on-line, desenvolvido a partir do enquadramento teórico e da informação obtida na parte qualitativa do estudo, que envolveu respostas de cerca de dois terços dos discentes de Engenharia de Produção. A informação foi recolhida através de um formulário disponibilizado pelo googledocs, e os resultados foram analisados com o auxílio do software SPSS, permitindo conhecer as expectativas e percepções dos alunos e, consequentemente, os gaps provenientes a serem trabalhados. Finalmente, o estudo revelou que para aspectos de qualidade, os pontos de tangibilidade, como infraestrutura geral, laboratórios técnicos específicos, cantina e biblioteca, precisam ser melhorados, e, para aspectos de sustentabilidade, surge a necessidade de melhorar as formas de divulgação do curso, captação de alunos e propostas para a retenção dos mesmos para outros cursos e projetos da IES. Deste modo, o trabalho desenvolvido atingiu seu objetivo e se mostrou válido para aplicações na IES e em outros cursos da mesma (com as devidas adaptações). Fica como recomendação final aplicar o estudo periodicamente para se captar as mudanças situacionais que ocorrerem, manter um controle eficiente dos aspectos estudados e gerar melhorias contínuas no curso estudado e na própria IES.
Resumo:
A convite do Departamento de Línguas e Culturas da Universidade de Aveiro, formulado em finais de 2007, cerca de três dezenas de especialistas de diferentes áreas de conhecimento aceitaram escrever um ensaio cada, para integrar este volume que se destina a assinalar os 500 anos do nascimento de Fernando Oliveira, também conhecido por Fernão de Oliveira (c. 1507– – c. 1582), um Humanista genial cujo nome está intimamente associado a Aveiro. A escolha do adjectivo “genial” que figura no título e que serve para qualificar a extraordinária e multifacetada produção oliveiriana, espelho dos seus múltiplos interesses, não sendo consensual, foi intencional. Com ele pretende-se homenagear também Luís de Albuquerque, outro grande vulto da cultura e da ciência portuguesas, que, não receando as palavras, escreveu um ensaio sobre o autor intitulado «Fernando Oliveira. Um Português genial, aventureiro e insubmisso»1. Também a escolha da grafia do nome do autor foi devidamente ponderada. Seguindo as mais recentes práticas, já muito discutidas e fundamentadas2, decidimo-nos por Fernando Oliveira, por ser a forma onomástica mais moderna, inscrita no frontispício da Arte da Guerra do Mar e em todas as outras obras, com excepção da Grammatica da Lingoagem Portuguesa, onde aparece Fernão doliveyra. Respeitámos, no entanto, as opções dos autores, sobretudo dos que se dedicaram ao estudo do tratado gramatical, que ora escreveram Fernão de Oliveira, ora Fernão d’Oliveira, consentindo assim que a oscilação da grafia do nome fosse aflorando ao longo deste volume, à semelhança do que acontece no conjunto de escritos do autor. (...)
Resumo:
Sea salt is a natural product obtained from the evaporation of seawater in saltpans due to the combined effect of wind and sunlight. Nowadays, there is a growing interest for protection and re-valorisation of saltpans intrinsically associated to the quality of sea salt that can be evaluated by its physico-chemical properties. These man-made systems can be located in different geographical areas presenting different environmental surroundings. During the crystallization process, organic compounds coming from these surroundings can be incorporated into sea salt crystals, influencing their final composition. The organic matter associated to sea salt arises from three main sources: algae, surrounding bacterial community, and anthropogenic activity. Based on the hypothesis that sea salt contains associated organic compounds that can be used as markers of the product, including saltpans surrounding environment, the aim of this PhD thesis was to identify these compounds. With this purpose, this work comprised: 1) a deep characterisation of the volatile composition of sea salt by headspace solid phase microextraction combined with comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (HS-SPME/GCGC–ToFMS) methodology, in search of potential sea salt volatile markers; 2) the development of a methodology to isolate the polymeric material potentially present in sea salt, in amounts that allow its characterisation in terms of polysaccharides and protein; and 3) to explore the possible presence of triacylglycerides. The high chromatographic resolution and sensitivity of GC×GC–ToFMS enabled the separation and identification of a higher number of volatile compounds from sea salt, about three folds, compared to unidimentional chromatography (GC–qMS). The chromatographic contour plots obtained revealed the complexity of marine salt volatile composition and confirmed the relevance of GC×GC–ToFMS for this type of analysis. The structured bidimentional chromatographic profile arising from 1D volatility and 2D polarity was demonstrated, allowing more reliable identifications. Results obtained for analysis of salt from two locations in Aveiro and harvested over three years suggest the loss of volatile compounds along the time of storage of the salt. From Atlantic Ocean salts of seven different geographical origins, all produced in 2007, it was possible to identify a sub-set of ten compounds present in all salts, namely 6-methyl-5-hepten-2-one, 2,2,6-trimethylcyclohexanone, isophorone, ketoisophorone, β-ionone-5,6-epoxide, dihydroactinidiolide, 6,10,14-trimethyl-2-pentadecanone, 3-hydroxy-2,4,4-trimethylpentyl 2-methylpropanoate, 2,4,4-trimethylpentane-1,3-diyl bis(2-methylpropanoate), and 2-ethyl-1-hexanol. These ten compounds were considered potential volatile markers of sea salt. Seven of these compounds are carotenoid-derived compounds, and the other three may result from the integration of compounds from anthropogenic activity as metabolites of marine organisms. The present PhD work also allowed the isolation and characterisation, for the first time, of polymeric material from sea salt, using 16 Atlantic Ocean salts. A dialysis-based methodology was developed to isolate the polymeric material from sea salt in amounts that allowed its characterisation. The median content of polymeric material isolated from the 16 salts was 144 mg per kg of salt, e.g. 0.014% (w/w). Mid-infrared spectroscopy and thermogravimetry revealed the main occurrence of sulfated polysaccharides, as well as the presence of protein in the polymeric material from sea salt. Sea salt polysaccharides were found to be rich in uronic acid residues (21 mol%), glucose (18), galactose (16), and fucose (13). Sulfate content represented a median of 45 mol%, being the median content of sulfated polysaccharides 461 mg/g of polymeric material, which accounted for 66 mg/kg of dry salt. Glycosidic linkage composition indicates that the main sugar residues that could carry one or more sulfate groups were identified as fucose and galactose. This fact allowed to infer that the polysaccharides from sea salt arise mainly from algae, due to their abundance and composition. The amino acid profile of the polymeric material from the 16 Atlantic Ocean salts showed as main residues, as medians, alanine (25 mol%), leucine (14), and valine (14), which are hydrophobic, being the median protein content 35 mg/g, i.e. 4,9 mg per kg of dry salt. Beside the occurrence of hydrophobic volatile compounds in sea salt, hydrophobic non-volatile compounds were also detected. Triacylglycerides were obtained from sea salt by soxhlet extraction with n-hexane. Fatty acid composition revealed palmitic acid as the major residue (43 mol%), followed by stearic (13), linolenic (13), oleic (12), and linoleic (9). Sea salt triacylglycerides median content was 1.5 mg per kg of dry salt. Both protein and triacylglycerides seem to arise from macro and microalgae, phytoplankton and cyanobacteria, due to their abundance and composition. Despite the variability resulting from saltpans surrounding environment, this PhD thesis allowed the identification of a sea salt characteristic organic compounds profile based on volatile compounds, polysaccharides, protein, and triacylglycerides.
Resumo:
Directionally solidified zirconia-based eutectic (DSE) fibres were obtained using the laser floating zone (LFZ) method. Two systems were investigated: zirconia-barium zirconate and zirconia-mullite. The purpose was to take advantage of zirconia properties, particularly as an ionic conductor and a mechanical rein-forcement phase. The influence of processing conditions in the structural and microstructural characteristics and their consequences on the electrical and mechanical behaviour were the focus of this thesis. The novel zirconia-barium zirconate eutectic materials were developed in order to combine oxygen ionic conduction through zirconia with protonic conduction from barium zirconate, promoting mixed ionic conduction behaviour. The mi-crostructure of the fibres comprises two alternated regions: bands having coarser zirconia-rich microstructure; and inter-band regions changing from a homogeneous coupled eutectic, at the lowest pulling rate, to columnar colony microstructure, for the faster grown fibres. The bands inter-distance increases with the growth rate and, at 300 mm/h, zirconia dendrites develop enclosed in a fine-interpenetrated network of 50 vol.% ZrO2-50 vol.% BaZrO3. Both phases display contiguity without interphase boundaries, according to impedance spec-troscopy data. Yttria-rich compositions were considered in order to promote the yttrium incorporation in both phases, as revealed by Raman spectroscopy and corroborated by the elemental chemical analysis in energy dispersive spectros-copy. This is a mandatory condition to attain simultaneous contribution to the mixed ionic conduction. Such results are supported by impedance spectrosco-py measurements, which clearly disclose an increase of total ionic conduction for lower temperatures in wet/reduction atmospheres (activation energies of 35 kJ/mol in N2+H2 and 48 kJ/mol in air, in the range of 320-500 ºC) compared to the dry/oxidizing conditions (attaining values close to 90 kJ/mol, above 500 ºC). At high temperatures, the proton incorporation into the barium zirconate is un-favourable, so oxygen ion conduction through zirconia prevails, in dry and oxi-dizing environments, reaching a maximum of 1.3x10-2 S/cm in dry air, at ~1000 ºC. The ionic conduction of zirconia was alternatively combined with another high temperature oxygen ion conductor, as mullite, in order to obtain a broad elec-trolytic domain. The growth rate has a huge influence in the amount of phases and microstructure of the directionally solidified zirconia-mullite fibres. Their microstructure changes from planar coupled eutectic to dendritic eutectic mor-phology, when the growth rate rises from 1 to 500 mm/h, along with an incre-ment of tetragonal zirconia content. Furthermore, high growth rates lead to the development of Al-Si-Y glassy phase, and thus less mullite amount, which is found to considerably reduce the total ionic conduction of as-grown fibres. The reduction of the glassy phase content after annealing (10h; 1400 ºC) promotes an increase of the total ionic conduction (≥0.01 S/cm at 1370 °C), raising the mullite and tetragonal zirconia contents and leading to microstructural differ-ences, namely the distribution and size of the zirconia constituent. This has important consequences in conductivity by improving the percolation pathways. A notable increase in hardness is observed from 11.3 GPa for the 10 mm/h pulled fibre to 21.2 GPa for the fibre grown at 500 mm/h. The ultra-fine eutectic morphology of the 500 mm/h fibres results in a maximum value of 534 MPa for room temperature bending strength, which decreases to about one-fourth of this value at high temperature testing (1400 ºC) due to the soft nature of the glassy-matrix.
Resumo:
Habitat conversion and environmental degradation have reached alarming levels in the Pantanal, endangering all its biodiversity. This scenario is complicated by the fact that the biome relies on only a few protected areas, which combined do not exceed 10% of the territory. Felids, as predators, play a vital role in the maintenance of this ecosystem, but require large areas, have low population densities and, typically, are very sensitive to environmental disturbances. Amolar Mountain Ridge is considered an area of extreme importance and high priority for conservation within the biome. There are four species of felids in this region: the jaguar (Panthera onca), the puma (Puma concolor), the ocelot (Leopardus pardalis), and jaguarundi (Puma yagouaroundi). However, little is known about the ecology of these species in this region or the magnitude of interaction between the communities living around the protected areas and the animals. The goal of this study was to increase our knowledge about these felids and understand how people interact with them in order to contribute to their conservation in the network of parks within Amolar. Camera trapping surveys were carried out in two areas of the network, covering approximately 83,000 hectares, in order to identify the species of mammals occurring in the region, those that may be potential prey for the felids, and to obtain basic ecological data about both felids and prey. In addition, we conducted surveys in three riverside schools in order to assess the knowledge, perceptions and attitudes of schoolchildren regarding the four focal felids, and surveys among the adult population to assess their perceptions and attitudes towards the jaguar. We recorded a total of 33 species of mammals from both study areas. The large cats were cathemeral, reflecting the temporal activity of larger prey, whereas the ocelot was nocturnal, mirroring the activity of smaller prey. Jaguar occupancy was influenced by prey abundance, while puma occupancy was influenced by patch density in drier dense forest. Jaguars and pumas may be competitors over temporal and spatial scales, while no resource overlap was found for ocelots. Overall, both adults and children tended to have negative perceptions about the cats, which were related to the fear of being attacked. To increase awareness about the species and to maximize the effectiveness of protective measures in the network of reserves, it is recommended to develop and implement an Environmental Educational Program in the medium- to long-term in order to minimize the fear of these felids and to counsel locals on the role of felids in the maintenance of the Pantanal’s biodiversity.
Resumo:
The high dependence of Portugal from foreign energy sources (mainly fossil fuels), together with the international commitments assumed by Portugal and the national strategy in terms of energy policy, as well as resources sustainability and climate change issues, inevitably force Portugal to invest in its energetic self-sufficiency. The 20/20/20 Strategy defined by the European Union defines that in 2020 60% of the total electricity consumption must come from renewable energy sources. Wind energy is currently a major source of electricity generation in Portugal, producing about 23% of the national total electricity consumption in 2013. The National Energy Strategy 2020 (ENE2020), which aims to ensure the national compliance of the European Strategy 20/20/20, states that about half of this 60% target will be provided by wind energy. This work aims to implement and optimise a numerical weather prediction model in the simulation and modelling of the wind energy resource in Portugal, both in offshore and onshore areas. The numerical model optimisation consisted in the determination of which initial and boundary conditions and planetary boundary layer physical parameterizations options provide wind power flux (or energy density), wind speed and direction simulations closest to in situ measured wind data. Specifically for offshore areas, it is also intended to evaluate if the numerical model, once optimised, is able to produce power flux, wind speed and direction simulations more consistent with in situ measured data than wind measurements collected by satellites. This work also aims to study and analyse possible impacts that anthropogenic climate changes may have on the future wind energetic resource in Europe. The results show that the ECMWF reanalysis ERA-Interim are those that, among all the forcing databases currently available to drive numerical weather prediction models, allow wind power flux, wind speed and direction simulations more consistent with in situ wind measurements. It was also found that the Pleim-Xiu and ACM2 planetary boundary layer parameterizations are the ones that showed the best performance in terms of wind power flux, wind speed and direction simulations. This model optimisation allowed a significant reduction of the wind power flux, wind speed and direction simulations errors and, specifically for offshore areas, wind power flux, wind speed and direction simulations more consistent with in situ wind measurements than data obtained from satellites, which is a very valuable and interesting achievement. This work also revealed that future anthropogenic climate changes can negatively impact future European wind energy resource, due to tendencies towards a reduction in future wind speeds especially by the end of the current century and under stronger radiative forcing conditions.
Resumo:
A grande motivação para este trabalho resultou na avaliação da vulnerabilidade sísmica das escolas básicas e secundárias que fazem parte integrante do parque escolar de Portugal Continental. Apesar de até ao momento apenas se terem estudado a vulnerabilidade de algumas escolas em algumas zonas particulares do nosso país, para este trabalho de investigação tivemos uma ambição muito maior e obviamente fizemos um esforço muito maior. Estabelecemos assim como meta, a avaliação de todo o parque escolar. Embora todo o parque escolar possua na ordem das três centenas de escolas em todo o território nacional e sendo este projeto de reabilitação, um projeto com a duração de 2007 a 2015. Em 2011, por motivos da crise económica, todo o projeto congelou sendo reabilitadas até à data cerca de apenas um terço das escolas. Esta quantidade foi o número de escolas que avaliamos em todo o país. As escolas, sendo edifícios públicos com uma importância fundamental, tanto pela elevada concentração de jovens, como pela função essencial como centros de aprendizagem para as gerações vindouras, como também pela ameaça que representam na eventualidade dum cenário sísmico pela enorme densidade de utilizadores, e pela vantagem de nesse cenário de catástrofe a importância estrutural ser superior em relação à maior parte dos edifícios correntes, devidamente demonstrado pelos argumentos enumerados, consequentemente as escolas podem servir como instalações de proteção civil perante uma catástrofe sísmica para apoio das populações circundantes afetadas. Portanto para cada uma das escolas cordialmente fornecidas pelo Parque Escolar, E.P.E., foi feito um estudo exaustivo e muito individual de cada uma das escolas, onde cada análise foi desenvolvida por uma metodologia simplificada, sendo cada análise sempre individual, e nunca tendo sida aplicada em série, este fator melhora substancialmente a eficácia da avaliação para a quantificação das vulnerabilidades e da determinação do grau de dano e das frações de perda para os requisitos fundamentais de limitação de danos, de não colapso, e de colapso iminente que correspondem a ações com períodos de retorno de 95, 475 e 975 anos. Este trabalho é fundamental para as entidades competentes terem a consciência da vulnerabilidade das escolas secundárias, para puderem atuar a nível estrutural e diminuir assim a vulnerabilidade sísmica, e mesmo que por impossibilidade económica o poder governamental não intervenha, então pode e principalmente deve, elaborar planos de emergência tanto com engenheiros civis qualificados como com a total colaboração das corporações de bombeiros que fazem parte das forças de operação e socorro da Autoridade Nacional de Proteção Civil (ANPC).
Resumo:
This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.
Resumo:
The use of plants with medicinal purposes is an ancient practice still very common in developing regions, and is rapidly spreading in industrialized countries. This fact is evidenced by the large number of ethnobotanical studies found in the literature referring that these plants are often used as decoctions and infusions. In most studies the reported biological activities are attributed to the presence of phenolic compounds, due to their antioxidant properties, and to polysaccharides, with its anti-tumoral properties. In “Trás-os-Montes” region, some of the most popular infusions used by the popular medicine are prepared with the dried leaves of Fraxinus angustifolia, the dried shoots of Mentha suaveolens, and the dried inflorescences of Pterospartum tridentatum. However, there are no studies about the polysaccharides present in these infusions. Thus, through the structural characterization of the polysaccharides present in the infusions of F. angustifolia, M. suaveolens, and P. tridentatum, the present PhD thesis intends to evaluate the possible relation between polysaccharides and the immunostimulatory activity that these infusions might present. In a preliminary phase, infusions of F. angustifolia were prepared according to the popular tradition, and it was observed that the obtained water soluble material contained approximately 85% of material non-retained in C18 cartridges, with hydrophilic characteristics, with the remaining 15% comprising retained-material with hydrophobic characteristics. It was also shown that the infusions only contained between 2 and 4% of high molecular weight material (HMWM), which comprised approximately 30% of carbohydrate material. Sugar and methylation analysis of the HMWM suggested the presence of pectic polysaccharides, together with type II arabinogalactans, mannans, and xyloglucans. However, the amount of material obtained is to low for the fractionation, and structural analysis of the polysaccharides present. The 4 h decoction, divided in two periods of 2 h, with water renewal, allowed to increase the HMWM yield, relatively to the infusions traditional infusions. It was also observed that the decoction also allowed to increase the HMWM proportion of carbohydrate material, due to an increase in the proportion of uronic acid present, although the neutral sugar residues seemed to be detected in similar proportions. Therefore, in all the experiments subsequently performed, the HMWM used was obtained through the decoction of F. angustifolia dried leaves, M. suaveolens dried shoots, and P. tridentatum dried inflorescences. x After the fractionation, through ethanol precipitation, and anion exchange chromatography, of the polysaccharides from the HMWM obtained by the decoction of the vegetable material of the distinct studied plants, it was observed the presence of high proportions of pectic polysaccharides, containing type I arabinogalactans, together with minor proportions of type II arabinogalactans, mannans, and xyloglucans. The presence of pectic polysaccharides in the extracts from F. angustifolia was also evidenced through endo-polygalacturonase treatment, and ESI-MS and ESI-MS/MS experiments. The detection of linked pentose and uronic acid residues, also seemed to suggest the presence of xylogalacturonan domains in the pectic polysaccharides from F. angustifolia. The extracts from F. angustifolia dried leaves also contained type II arabinogalactans that exhibited a higher structural diversity than those detected in the M. suaveolens, and P. tridentatum extracts, particularly in the substitution degree of the galactan backbone, and in the extension of the (1→5)-Araf side chains. Moreover, for all the plants studied, it was also observed that the type II arabinogalactans, extracted during the 2nd 2h of the extraction process, exhibited a substitution degree of the galactan backbone higher than those extracted during the 1st 2h. The extracts from P. tridentatum dried inflorescences contained higher proportions of mannans, and also of xyloglucans, both presenting a substitution degree higher than those, which were detected in lower proportion in the extracts of F. angustifolia and M. suaveolens. Through ESI-MS and ESI-MS/MS it was possible to evidence that the mannans present in the extracts of P. tridentatum presented acetyl groups on the O-2 of the mannosyl residues. It was also evidenced that the P. tridentatum mannans were more extensively acetylated than the mannans detected in the coffee infusion, LBG, and other non-conventional mannan sources. Moreover, it was detected the presence of oligosaccharides comprising hexose residues linked to non acetylated pentose residues, suggesting the possible presence of arabinose residues in the mannans from P. tridentatum extracts. The immunostimulatory activity of three fractions isolated from the extracts of F. angustifolia, M. suaveolens, and P. tridentatum, was tested and an increase in the NO production by macrophages, without compromising their cellular viability, was observed. The type I, and type II arabinogalactans detected in the extracts from F. angustifolia, and M. suaveolens seem to have contributed for the observed immunostimulatory activity. For the fraction from P. tridentatum, the mannans acetylation, and the presence of type I, and type II arabinogalactans seemed to contribute for the macrophage immunostimulatory activity observed. The possible presence of storage xyloglucans from the inflorescences seeds, also seems to have contributed for the immunostimulatory activity registered when the macrophages were stimulated with higher extract concentrations. The results obtained allow to conclude that the extracts of F. angustifolia dried leaves, M. suaveolens dried shoots, and P. tridentatum dried inflorescences contained high proportions of pectic polysaccharides, exhibiting type I arabinogalactans, together with other polysaccharides, such as type II arabinogalactans, mannans, and xyloglucans. This polysaccharide mixture seems to have contributed to the immunostimulatory activity of fractions isolated from the extracts of the studied plants. Therefore, as the same type of polysaccharides seem to be present in the decoctions and in the infusions, it seems possible that the polysaccharides might contribute for the therapeutic properties frequently associated by the popular tradition to the infusions of these plants.
Resumo:
O presente projeto de investigação em Engenharia Civil é construído em torno das necessidades atuais expressas pelos setores da construção e obras públicas em fundações. Em colaboração com a empresa GEO este trabalho pretende dar resposta em tempo útil aos empreiteiros, pondo o conhecimento científico ao serviço da indústria, colmatando a escassez de investigação académica que se verifica neste domínio. Esta investigação, à qual se associou a empresa BRASFOND, recorre ao estudo de ensaios de carga estática à compressão realizados no Brasil, segundo a NBR 12131 (2005) e NBR 12131 (2006). Assim, para estudar o desempenho de polímeros aplicados na estabilização de solos em fundações, foram analisados 6 ensaios de carga realizados em obras de intervenção da empresa GEO, disponibilizados pela empresa BRASFOND. Os ensaios de carga verticais estáticos de compressão axial foram realizados em estacas de 3 obras, nomeadamente a construção de uma central termoelétrica, em 2009, e de dois edifícios, em 2010. O projeto de fundações da central termoelétrica assentou na execução de estacas com polímeros, com 1270 estacas moldadas “in loco” com 1 000 mm de diâmetro e profundidade variável de 10 m a 18 m, em solos moles e pouco compactos de 8 m a 9 m de espessura, encastradas até 3 m sobre um maciço Gnaisse medianamente alterado (W3). Dos ensaios de carga realizados nesta obra, foram alvo deste estudo a análise dos primeiros 4 disponibilizados pela empresa. Os valores estimados por métodos semi-empíricos da capacidade resistente das estacas, considerando a recuperação da rocha nos trechos encastrados, foram comparados com a carga resistente última à compressão obtida através do ensaio de carga. O projeto de fundações de dois edifícios de elevado número de andares (cerca de 30) no litoral do Estado de São Paulo, em Santos, assentou na execução de fundações indiretas em solos moles a muito moles, com estacas de grandes dimensões moldadas com recurso a polímeros. Para atestar a qualidade das estacas, de forma a avaliar o comportamento carga versus assentamento e estimar as características da capacidade de carga, procedeu-se à execução de dois ensaios de carga estática à compressão, um dos quais instrumentado em profundidade. Os valores estimados por métodos semi-empíricos da capacidade resistente das estacas foram comparados com a carga resistente última à compressão obtida através do ensaio de carga. Para além deste estudo se revestir de interesse académico e empresarial, o contexto inerente à aplicação de polímeros em fundações é relevante para a prática pedagógica. Assim, este projeto envolve também uma componente educacional, esta última implementada numa escola do ensino básico e secundário da região centro do país.
Resumo:
O aquecimento do sistema climático é inequívoco e a influência humana é clara. A continuação da emissão de gases com efeito de estufa irá potenciar os impactes das alterações climáticas, representando um compromisso futuro que se perpetuará por vários séculos. As alterações climáticas não proporcionam uma experiência sensorial direta, embora as variações de temperatura e de precipitação e os extremos climáticos de vários tipos poderem ser experienciados. O cidadão comum não se apercebe do que está a acontecer, a menos que ocorram mudanças significativas, no estado normal do tempo para uma determinada época, na região do mundo onde ele vive. Mesmo para os especialistas, o problema só é cognoscível através de uma vasta rede científica, técnica e institucional. O conhecimento, é portanto, transmitido ao público em geral maioritariamente através de representações dos media sobre o discurso produzido pela comunidade científica. O principal objetivo deste trabalho é averiguar a interligação entre o discurso científico, o discurso mediático e as perceções da população portuguesa na temática das alterações climáticas. A metodologia utilizada, para a prossecução do objetivo, num trabalho que cruza o domínio científico da engenharia do ambiente com o das ciências sociais, encontra-se dividida em 3 fases principais: (1) Uma primeira fase onde se realiza uma análise ao discurso científico de produção nacional, com uma análise de conteúdo aos resumos dos artigos científicos, utilizando 884 resumos da base de dados Scopus de 1975 a 2013 com a palavra-chave ‘Climate Change’; (2) Uma segunda fase onde se analisa o conteúdo de notícias de meios de comunicação social portugueses, aplicando uma análise de conteúdo a 4340 notícias veiculadas por 4 órgãos de comunicação social (Correio da Manhã, Público, RTP e TSF) entre 2004 e 2013, utilizando os respetivos motores de busca online com a palavra-chave ‘Alterações Climáticas’; e, (3) uma terceira fase onde se compila a informação dos estudos existentes sobre a população portuguesa, utilizando os dados dos Eurobarómetros que incluem o tema das alterações climáticas de 1982 a 2014. Seguindo uma linha condutora que inclui o discurso científico, o discurso mediático e as perceções sociais, almejou-se uma abrangência do tema das alterações climáticas, investigando a existência do fenómeno e as respetivas causas, as consequências com a análise dos impactes e dos riscos associados a esses impactes e as soluções através de medidas de mitigação e de adaptação. Nos principais resultados emerge a evidência de que a intensidade de crescimento da produção científica nacional não se traduz num crescimento consistente dos índices de noticiabilidade dos órgãos de comunicação social e desde 2010 que o número de dias por ano, sem notícias sobre alterações climáticas, ultrapassa dos 50%. Em consequência, os níveis de informação da população portuguesa sobre as alterações climáticas são sistematicamente inferiores à média europeia. Em Portugal as taxas de pouco ou nulo conhecimento rondam os dois terços de inquiridos. Não obstante o seu caráter contínuo, para que as alterações climáticas se tornem alvo de interesse dos media é necessário que ocorram reuniões políticas, encontros científicos ou outros acontecimentos. A visibilidade alcançada pelos acontecimentos nacionais é muito fraca e os acontecimentos meteorológicos extremos, não são frequentemente relacionados com o fenómeno das alterações climáticas. No seio da comunidade científica portuguesa existe um claro consenso sobre a existência das alterações climáticas e das suas causas antropogénicas. No discurso mediático português não se verifica enviesamento da informação não sendo surpreendente os baixos níveis de ceticismo dos portugueses. A abordagem aos impactes das alterações climáticas, tanto no discurso científico como no discurso mediático, é robusta e em 2014, cerca de sete em dez portugueses afirma que as alterações climáticas são um problema muito sério. Contudo, Portugal apresenta a proporção mais baixa da Europa de respondentes que percepcionam as alterações climáticas como o problema mais grave que o mundo enfrenta. Para estes resultados poderá contribuir a baixa inclusão de termos relacionados com o risco, tanto no discurso científico como no mediático, não ultrapassando os 20%. Tanto o discurso científico como o discurso mediático não estão direcionados para as soluções (mencionando especificamente medidas de mitigação ou medidas de adaptação). A menção às medidas de mitigação e às medidas de adaptação não ultrapassam os 16% no discurso científico e apresentam valores ainda mais baixos no discurso mediático (13%). Em ambos os discursos existe uma clara preferência pela menção às medidas de adaptação em detrimento das medidas de mitigação. Com valores tão baixos na abordagem às soluções das alterações climáticas não surpreendem os também diminutos níveis de responsabilidade que a população portuguesa atribui a si própria no combate às alterações climáticas.
Resumo:
Rapid and specific detection of foodborne bacteria that can cause food spoilage or illness associated to its consumption is an increasingly important task in food industry. Bacterial detection, identification, and classification are generally performed using traditional methods based on biochemical or serological tests and the molecular methods based on DNA or RNA fingerprints. However, these methodologies are expensive, time consuming and laborious. Infrared spectroscopy is a reliable, rapid, and economic technique which could be explored as a tool for bacterial analysis in the food industry. In this thesis it was evaluated the potential of IR spectroscopy to study the bacterial quality of foods. In Chapter 2, it was developed a calibration model that successfully allowed to predict the bacterial concentration of naturally contaminated cooked ham samples kept at refrigeration temperature during 8 days. In this part, it was developed the methodology that allowed the best reproducibility of spectra from bacteria colonies with minimal sample preparation, which was used in the subsequent work. Several attempts trying different resolutions and number of scans in the IR were made. A spectral resolution of 4 cm-1, with 32 scans were the settings that allowed the best results. Subsequently, in Chapter 3, it was made an attempt to identify 22 different foodborne bacterial genera/species using IR spectroscopy coupled with multivariate analysis. The principal component analysis, used as an exploratory technique, allowed to form distinct groups, each one corresponding to a different genus, in most of the cases. Then, a hierarchical cluster analysis was performed to further analyse the group formation and the possibility of distinction between species of the same bacterial genus. It was observed that IR spectroscopy not only is suitable to the distinction of the different genera, but also to differentiate species of the same genus, with the simultaneous use of principal component analysis and cluster analysis techniques. The utilization of IR spectroscopy and multivariate statistical analysis were also investigated in Chapter 4, in order to confirm the presence of Listeria monocytogenes and Salmonella spp. isolated from contaminated foods, after growth in selective medium. This would allow to substitute the traditional biochemical and serological methods that are used to confirm these pathogens and that delay the obtainment of the results up to 2 days. The obtained results allowed the distinction of 3 different Listeria species and the distinction of Salmonella spp. from other bacteria that can be mistaken with them. Finally, in chapter 5, high pressure processing, an emerging methodology that permits to produce microbiologically safe foods and extend their shelf-life, was applied to 12 foodborne bacteria to determine their resistance and the effects of pressure in cells. A treatment of 300 MPa, during 15 minutes at room temperature was applied. Gram-negative bacteria were inactivated to undetectable levels and Gram-positive showed different resistances. Bacillus cereus and Staphylococcus aureus decreased only 2 logs and Listeria innocua decreased about 5 logs. IR spectroscopy was performed in bacterial colonies before and after HPP in order to investigate the alterations of the cellular compounds. It was found that high pressure alters bands assigned to some cellular components as proteins, lipids, oligopolysaccharides, phosphate groups from the cell wall and nucleic acids, suggesting disruption of the cell envelopes. In this work, bacterial quantification and classification, as well as assessment of cellular compounds modification with high pressure processing were successfully performed. Taking this into account, it was showed that IR spectroscopy is a very promising technique to analyse bacteria in a simple and inexpensive manner.