Modelação do risco de perda dentária por doença periodontal

O prognóstico da perda dentária é um dos principais problemas na prática clínica de medicina dentária. Um dos principais fatores prognósticos é a quantidade de suporte ósseo do dente, definido pela área da superfície radicular dentária intraóssea. A estimação desta grandeza tem sido realizada por diferentes metodologias de investigação com resultados heterogéneos. Neste trabalho utilizamos o método da planimetria com microtomografia para calcular a área da superfície radicular (ASR) de uma amostra de cinco dentes segundos pré-molares inferiores obtida da população portuguesa, com o objetivo final de criar um modelo estatístico para estimar a área de superfície radicular intraóssea a partir de indicadores clínicos da perda óssea. Por fim propomos um método para aplicar os resultados na prática. Os dados referentes à área da superfície radicular, comprimento total do dente (CT) e dimensão mésio-distal máxima da coroa (MDeq) serviram para estabelecer as relações estatísticas entre variáveis e definir uma distribuição normal multivariada. Por fim foi criada uma amostra de 37 observações simuladas a partir da distribuição normal multivariada definida e estatisticamente idênticas aos dados da amostra de cinco dentes. Foram ajustados cinco modelos lineares generalizados aos dados simulados. O modelo estatístico foi selecionado segundo os critérios de ajustamento, preditibilidade, potência estatística, acurácia dos parâmetros e da perda de informação, e validado pela análise gráfica de resíduos. Apoiados nos resultados propomos um método em três fases para estimação área de superfície radicular perdida/remanescente. Na primeira fase usamos o modelo estatístico para estimar a área de superfície radicular, na segunda estimamos a proporção (decis) de raiz intraóssea usando uma régua de Schei adaptada e na terceira multiplicamos o valor obtido na primeira fase por um coeficiente que representa a proporção de raiz perdida (ASRp) ou da raiz remanescente (ASRr) para o decil estimado na segunda fase. O ponto forte deste estudo foi a aplicação de metodologia estatística validada para operacionalizar dados clínicos na estimação de suporte ósseo perdido. Como pontos fracos consideramos a aplicação destes resultados apenas aos segundos pré-molares mandibulares e a falta de validação clínica.

Rôle du facteur de transcription PITX1 dans les pathogenèses de l'ostéoporose et des maladies parodontales

L’ostéoporose est une maladie caractérisée par une faible masse osseuse et une détérioration du tissu osseux. Cette condition entraîne une plus grande fragilité osseuse et des risques de fractures. Plusieurs études ont associé l’ostéoporose à la faible densité osseuse des mandibules, à la perte d’attache parodontale, à l’augmentation de la hauteur de la crête alvéolaire et à la chute des dents. Cette étude vise à comprendre les mécanismes sous-jacents cette perte osseuse. En effet, au cours du développement des souris, PITX1 joue un rôle clé dans l'identité des membres postérieurs et dans le bon développement des mandibules et des dents. Son inactivation complète chez la souris mène à un phénotype squelettique sévère. Tandis que, son inactivation partielle provoque des symptômes apparentés à l'arthrose avec une augmentation de la masse osseuse au niveau de l’os cortical et de l’os trabéculaire. Inversement, une étude antérieure chez des jumelles monozygotiques discordantes pour l’ostéoporose, montrent une augmentation d’environ 8.6 fois du niveau d’expression du gène Pitx1 chez la jumelle ostéoporotique. Collectivement, ces données nous ont poussés à investiguer sur le rôle du facteur de transcription PITX1 dans le métabolisme osseux normal et pathologique. Dans ce contexte, des souris transgéniques Col1α1-Pitx1 sur-exprimant Pitx1 spécifiquement dans le tissu osseux sous le promoteur du collagène de type-I (fragment 2.1kpb) ont été générées et phénotypiquement caractérisées. Ces résultats ont révelé que les souris transgéniques Col1α1-Pitx1 présentaient un phénotype similaire à celui des patients ostéoporotiques accompagné d'une perte de dents et des problèmes dentaires et parodontaux. De plus, cette étude a révélé que la surexpression de Pitx1 induit une altération de l’homéostasie osseuse via l’inactivation de la voie de signalisation Wnt/β-caténine canonique. Cette hypothèse a été appuyée par le fait que le traitement des souris transgéniques Col1α1-Pitx1 avec du chlorure de lithium, un activateur de la voie Wnt canonique, prévient le phénotype ostéoporotique chez ces souris. Finalement, cette étude établit un rôle crucial de PITX1 dans la régulation de la masse osseuse et une implication possible dans l’ostéoporose et les maladies parodontales via l’inactivation de la voie de signalisation Wnt/β-caténine canonique.

Unwrapping microcomputed tomographic images for measuring cortical osteolytic lesions in the 5T2 murine model of myeloma treated by bisphosphonate

International audience

Effects of a rhythmic and choreographic program in obese and overweight participants

Introduction: Currently there is a growing trend in the prevalence of overweight and obesity. This increased prevalence trend leads to an increase in the costs of health care. Objective: The aim of the present study was to analyze the effects on physical fitness and bone mineral density through an intervention program of physical activity based on rhythmic and choreographic activities in an overweight and obese population. Method: An 8-month physical activity based on rhythmic and choreographic activities was conducted in overweight and obese people. Thirty-four participants aged 50.43 ± 10.57 with a body mass index (BMI) 38.37 ± 4.82 took part in the physical activity program. This study assesses the effects of fitness, percentage of body fat and bone mineral density (BMD). Results: After an 8-month physical activity intervention program based on rhythmic and choreographic activities, significant differences were found in: percentage of body fat (p = 0.004), aerobic capacity (p = 0.023), flexibility of the lower limbs (flexibility in the right leg p = 0.029 and left leg p = 0.002), balance (p < 0.001), strength in lower limbs (p = 0..003) and strength in upper limbs (p < 0.001). Besides that, significant differences were found in parameters related with BMD such as T-Score (p = 0.025) and Z-Score (p = 0.012), Bone Quality Index (BQI) (p = 0.026) and an increase in Broadband Ultrasound Attenuation (BUA) although not a statistically significant one (p = 0.939). Conclusions: These findings suggest that a physical activity program based on rhythmic and choreographic activities can act as a preventive method of mobility and fragility, as well as preventing bone loss.

Tratamento regenerativo para a peri-implantite

A peri-implantite é uma patologia que ocorre nos tecidos adjacentes dos implantes, onde ocorre uma perda óssea em redor do implante, podendo levar à sua perda. Vários mecanismos terapêuticos têm sido propostos na tentativa de travar a evolução desta patologia, como é o caso do tratamento regenerativo, onde se recorre ao uso de membranas e enxertos ou substitutos ósseos. O tratamento regenerativo tem sido alvo de grande discussão, uma vez que é impossível saber de que maneira cada paciente pode reagir à aplicação desta terapia, para além de que os resultados existentes nos estudos atuais reportam uma escassez no tratamento por completo da patologia. No entanto, os estudos existentes demonstram bons resultados e relatam que a sua aplicação é promissora no tratamento da peri-implantite, nomeadamente na redução dos parâmetros clínicos (profundidade de sondagem e hemorragia pós-sondagem) e dos parâmetros radiográficos (preenchimento ósseo).

CORR Insights® : loss of cement-bone interlock in retrieved tibial components from total knee arthroplasties

Most surgeons cement the tibial component in total knee replacement surgery. Mid-term registry data from a number of countries, including those from the United Kingdom and Australia, support the excellent survivorship of cemented tibial components. In spite of this success, results can always be improved, and cementing technique can play a role. Cementing technique on the tibia is not standardized, and surgeons still differ about the best ways to deliver cement into the cancellous bone of the upper tibia. Questions remain regarding whether to use a gun or a syringe to inject the cement into the cancellous bone of the tibial plateau . The ideal cement penetration into the tibial plateau is debated, though most reports suggest that 4 mm to 10 mm is ideal. Thicker mantles are thought to be dangerous due to the risk of bone necrosis, but there is little in the literature to support this contention...

Low appendicular muscle mass is correlated with femoral neck bone mineral density loss in postmenopausal women

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The association between coronary artery calcification progression and loss of bone density in non-dialyzed CKD patients

Background: Coronary artery calcification (CAC) and low bone density are coexisting deleterious conditions commonly shared by chronic kidney disease (CKD) patients. In the present study, we aimed to investigate whether the progression of CAC was associated with overtime reduction in bone density in non-dialyzed CKD patients. Methods: This is a prospective study of 24 months including 72 non-dialyzed CKD patients Stages 2 - 4 (age 57.6 +/- 10.3 years, 62% male, 22% diabetics). CAC and vertebral bone density (VBD) were measured by computed tomography. Results: At baseline, 46% of the patients had CAC (calcified group) and calcification was not identified in 54% of the patients (non-calcified group). The calcified group was older, predominantly male, and had lower VBD in comparison to non-calcified group. CAC progression was observed only in the calcified group (91% of the patients increased calcium score). The multiple regression analysis revealed loss of VBD as the independent determinant of CAC progression in these patients. Conclusion: CAC progression was associated with loss of VBD in non-dialyzed CKD patients.

Loss of inhibition over master pathways of bone mass regulation results in osteosclerotic bone metastases in prostate cancer

Prostate cancer is the most common cancer among men in industrialised countries. Most patients with prostate cancer, however, will not die of it. As a result, many of them will experience symptomatic metastasis during the course of the disease. Prostate cancer has a high propensity to metastasize to bone. Unlike many other cancers prostate cancer cells induce a rather osteosclerotic than osteolytic reaction in the bone marrow by interfering with physiological bone remodelling. A proper understanding of the mechanisms of tumour cell-induced bone alterations and exaggerated bone deposition in prostate cancer may open new and urgently needed therapeutic approaches in the field of palliative care for affected patients. In this review we focus on the central role of two major regulators of bone mass, the wingless type integration site family members (WNTs) and the bone morphogenetic proteins (BMPs), in the development of osteosclerotic bone metastases.

Does high intensity resistance training maintain bone mass during moderate weight loss in older overweight adults with type 2 diabetes

The aim was to investigate whether the addition of supervised high intensity progressive resistance training to a moderate weight loss program (RT+WLoss) could maintain bone mineral density (BMD) and lean mass compared to moderate weight loss (WLoss) alone in older overweight adults with type 2 diabetes. We also investigated whether any benefits derived from a supervised RT program could be sustained through an additional home-based program. This was a 12-month trial in which 36 sedentary, overweight adults aged 60 to 80 years with type 2 diabetes were randomized to either a supervised gymnasium-based RT+WLoss or WLoss program for 6 months (phase 1). Thereafter, all participants completed an additional 6-month home-based training without further dietary modification (phase 2). Total body and regional BMD and bone mineral content (BMC), fat mass (FM) and lean mass (LM) were assessed by DXA every 6 months. Diet, muscle strength (1-RM) and serum total testosterone, estradiol, SHBG, insulin and IGF-1 were measured every 3 months. No between group differences were detected for changes in any of the hormonal parameters at any measurement point. In phase 1, after 6 months of gymnasium-based training, weight and FM decreased similarly in both groups (P < 0.01), but LM tended to increase in the RT+WLoss (n=16) relative to the WLoss (n = 13) group [net difference (95% CI), 1.8% (0.2, 3.5), P < 0.05]. Total body BMD and BMC remained unchanged in the RT+WLoss group, but decreased by 0.9 and 1.5%, respectively, in the WLoss group (interaction, P < 0.05). Similar, though non-significant, changes were detected at the femoral neck and lumbar spine (L2-L4). In phase 2, after a further 6 months of home-based training, weight and FM increased significantly in both the RT+WLoss (n = 14) and WLoss (n = 12) group, but there were no significant changes in LM or total body or regional BMD or BMC in either group from 6 to 12 months. These results indicate that in older, overweight adults with type 2 diabetes, dietary modification should be combined with progressive resistance training to optimize the effects on body composition without having a negative effect on bone health.

Clonal characterization of bone marrow derived stem cells and their application for bone regeneration

Tissue engineering allows the design of functionally active cells within supportive bio-scaffolds to promote the development of new tissues such as cartilage and bone for the restoration of pathologically altered tissues. However, all bone tissue engineering applications are limited by a shortage of stem cells. The adult bone marrow stroma contains a subset of nonhematopoietic cells referred to as bone marrow mesenchymal stem cells (BMSCs). BMSCs are of interest because they are easily isolated from a small aspirate of bone marrow and readily generate single- cell-derived colonies. These cells have the capacity to undergo extensive replication in an undifferentiated state ex vivo. In addition, BMSCs have the potential to develop either in vitro or in vivo into distinct mesenchymal tissues, including bone, cartilage, fat, tendon, muscle, and marrow stroma. Thus, BMSCs are an attractive cell source for tissue engineering approaches. However, BMSCs are not homo- geneous and the quantity of stem cells decreases in the bone marrow in aged population. A sequential loss of lineage differentiation potential has been found in the mixed culture of bone marrow stromal cells due to a heterogenous popu- lation. Therefore, a number of studies have proposed that homogenous bone marrow stem cells can be generated from clonal culture of bone marrow cells and that BMSC clones have the greatest potential for the application of bone regeneration in vivo

Mineralized human primary osteoblast matrices as a model system to analyse interactions of prostate cancer cells with the bone microenvironment

Prostate cancer metastasis is reliant on the reciprocal interactions between cancer cells and the bone niche/micro-environment. The production of suitable matrices to study metastasis, carcinogenesis and in particular prostate cancer/bone micro-environment interaction has been limited to specific protein matrices or matrix secreted by immortalised cell lines that may have undergone transformation processes altering signaling pathways and modifying gene or receptor expression. We hypothesize that matrices produced by primary human osteoblasts are a suitable means to develop an in vitro model system for bone metastasis research mimicking in vivo conditions. We have used a decellularized matrix secreted from primary human osteoblasts as a model for prostate cancer function in the bone micro-environment. We show that this collagen I rich matrix is of fibrillar appearance, highly mineralized, and contains proteins, such as osteocalcin, osteonectin and osteopontin, and growth factors characteristic of bone extracellular matrix (ECM). LNCaP and PC3 cells grown on this matrix, adhere strongly, proliferate, and express markers consistent with a loss of epithelial phenotype. Moreover, growth of these cells on the matrix is accompanied by the induction of genes associated with attachment, migration, increased invasive potential, Ca2+ signaling and osteolysis. In summary, we show that growth of prostate cancer cells on matrices produced by primary human osteoblasts mimics key features of prostate cancer bone metastases and thus is a suitable model system to study the tumor/bone micro-environment interaction in this disease.

Strategy in developing cell based therapy for large bone

Regeneration of osseous defects by tissue-engineering approach provides a novel means of treatment utilizing cell biology, materials science, and molecular biology. The concept of in vitro cultured osteoblasts having an ability to induce new bone formation has been demonstrated in the critical size defects using small animal models. The bone derived cells can be incorporated into bioengineered scaffolds and synthesize bone matrix, which on implantation can induce new bone formation. In search of optimal cell delivery materials, the extracellular matrix as cell carriers for the repair and regeneration of tissues is receiving increased attention. We have investigated extracellular matrix formed by osteoblasts in vitro as a scaffold for osteoblasts transplantation and found a mineralized matrix, formed by human osteoblasts in vitro, can initiate bone formation by activating endogenous mesenchymal cells. To repair the large bone defects, osteogenic or stem cells need to be prefabricated in a large three dimensional scaffold usually made of synthetic biomaterials, which have inadequate interaction with cells and lead to in vivo foreign body reactions. The interstitial extracellular matrix has been applied to modify biomaterials surface and identified vitronectin, which binds the heparin domain and RGD (Arg-Gly-Asp) sequence can modulate cell spreading, migration and matrix formation on biomaterials. We also synthesized a tri-block copolymer, methoxy-terminated poly(ethylene glycol)(MPEG)-polyL-lactide(PLLA)-polylysine(PLL) for human osteoblasts delivery. We identified osteogenic activity can be regulated by the molecular weight and composition of the triblock copolymers. Due to the sequential loss of lineage differentiation potential during the culture of bone marrow stromal cells that hinderers their potential clinical application, we have developed a clonal culture system and established several stem cell clones with fast growing and multi-differentiation properties. Using proteomics and subtractive immunization, several differential proteins have been identified and verified their potential application in stem cell characterization and tissue regeneration

Evolutionary design of bone scaffolds with reference to material selection

The favourable scaffold for bone tissue engineering should have desired characteristic features, such as adequate mechanical strength and three-dimensional open porosity, which guarantee a suitable environment for tissue regeneration. In fact, the design of such complex structures like bone scaffolds is a challenge for investigators. One of the aims is to achieve the best possible mechanical strength-degradation rate ratio. In this paper we attempt to use numerical modelling to evaluate material properties for designing bone tissue engineering scaffold fabricated via the fused deposition modelling technique. For our studies the standard genetic algorithm was used, which is an efficient method of discrete optimization. For the fused deposition modelling scaffold, each individual strut is scrutinized for its role in the architecture and structural support it provides for the scaffold, and its contribution to the overall scaffold was studied. The goal of the study was to create a numerical tool that could help to acquire the desired behaviour of tissue engineered scaffolds and our results showed that this could be achieved efficiently by using different materials for individual struts. To represent a great number of ways in which scaffold mechanical function loss could proceed, the exemplary set of different desirable scaffold stiffness loss function was chosen. © 2012 John Wiley & Sons, Ltd.

Identification of bone morphogenetic proteins 2 and 4 in commercial demineralized freeze-dried bone allograft preparations : pilot study

BACKGROUND: Demineralized freeze-dried bone allografts (DFDBAs) have been proposed as a useful adjunct in periodontal therapy to induce periodontal regeneration through the induction of new bone formation. The presence of bone morphogenetic proteins (BMPs) within the demineralized matrix has been proposed as a possible mechanism through which DFDBA may exert its biologic effect. However, in recent years, the predictability of results using DFDBA has been variable and has led to its use being questioned. One reason for the variability in tissue response may be attributed to differences in the processing of DFDBA, which may lead to loss of activity of any bioactive substances within the DFDBA matrix. Therefore, the purpose of this investigation was to determine whether there are detectable levels of bone morphogenetic proteins in commercial DFDBA preparations. METHODS: A single preparation of DFDBA was obtained from three commercial sources. Each preparation was studied in triplicate. Proteins within the DFDBA samples were first extracted with 4M guanidinium HCI for seven days at 40 degrees celsius and the residue was further extracted with 4M guanidinium HCL/EDTA for seven days at 40 degrees celsius. Two anti-human BMP-2 and -4 antibodies were used for the detection of the presence of BMP's in the extracts. RESULTS: Neither BMP-2 nor BMP-4 was detected in any of the extracts. When recombinant human BMP-2 and -4 were added throughout the extraction process of DFDBA extraction, not only were intact proteins detected but smaller molecular weight fragments were also noted in the extract. CONCLUSIONS: These results indicate that all of the DFDBA samples tested had no detectable amounts of BMP-2 and -4. In addition, an unknown substance present in the DFDBA may be responsible for degradation of whatever BMPs might be present.