A set of linear equations to calculate the steady-state operation of an electrical distribution system

In this paper, the calculation of the steady-state operation of a radial/meshed electrical distribution system (EDS) through solving a system of linear equations (non-iterative load flow) is presented. The constant power type demand of the EDS is modeled through linear approximations in terms of real and imaginary parts of the voltage taking into account the typical operating conditions of the EDS's. To illustrate the use of the proposed set of linear equations, a linear model for the optimal power flow with distributed generator is presented. Results using some test and real systems show the excellent performance of the proposed methodology when is compared with conventional methods. © 2011 IEEE.

Relationship between citrus productivity and indicators of uniformity in trickle irrigation system

In trickle irrigation systems, the design is based on the pre-established emission uniformity (EU) which is the combined result of the equipment characteristics and its hydraulic configuration. However, this desired value of the EU may not be confirmed by the final project (in field conditions) and neither by the yield uniformity. The hypotheses of this research were: a) the EU of a trickle irrigation system at field conditions is equal to the emission uniformity pre-established in the its design; b) EU has always the lowest value when compared with other indicators of uniformity; c) the discharge variation coefficient (VC) is not equal to production variation coefficient in the operational unit; d) the difference between the discharge variation coefficient and the productivity variation coefficient depends on the water depth applied. This study aimed to evaluate the relationship between EU used in the irrigation system design and the final yield uniformity. The uniformity indicators evaluated were: EU, distribution uniformity (UD) and the index proposed by Barragan & Wu (2005). They were compared estimating the performance of a trickle irrigation system applied in a citrus orchard with dimensions of 400m x 600m. The design of the irrigation system was optimized by a Linear Programming model. The tree rows were leveled in the larger direction and the spacing adopted in the orchard was 7m x 4m. The manifold line was always operating on a slope condition. The sensitivity analysis involved different slopes, 0, 3, 6, 9 and 12%, and different values of emission uniformity, 60, 70, 75, 80, 85, 90 and 94%. The citrus yield uniformity was evaluated by the variation coefficient. The emission uniformity (EU) after design differed from the EU pre-established, more sharply in the initial values lower than 90%. Comparing the uniformity indexes, the EU always generated lower values when compared with the UD and with the index proposed by Barragan. The emitter variation coefficient was always lower than the productivity variation coefficient. To obtain uniformity of production, it is necessary to consider the irrigation system uniformity and mainly the water depth to be applied.

A new microcontrolled structural health monitoring system based on the electromechanical impedance principle

This article presents a new method to detect damage in structures based on the electromechanical impedance principle. The system follows the variations in the output voltage of piezoelectric transducers and does not compute the impedance itself. The proposed system is portable, autonomous, versatile, and could efficiently replace commercial instruments in different structural health monitoring applications. The identification of damage is performed by simply comparing the variations of root mean square voltage from response signals of piezoelectric transducers, such as lead zirconate titanate patches bonded to the structure, obtained for different frequencies of the excitation signal. The proposed system is not limited by the sampling rate of analog-to-digital converters, dispenses Fourier transform algorithms, and does not require a computer for processing, operating autonomously. A low-cost prototype based on microcontroller and digital synthesizer was built, and experiments were carried out on an aluminum structure and excellent results have been obtained. © The Author(s) 2012.

Convertibility and the banking system in Argentina

Includes bibliography

Worker participation in company profits or operating results in Latin America

Includes bibliography

Biomobile: sistema de identificação de usuários em dispositivos móveis na plataforma Android utilizando reconhecimento de faces a partir de vídeo

Pós-graduação em Ciência da Computação - IBILCE

Congestion Effects on Regional & System Emission and Consumers Allocated Cost

This paper considers the congestion effects on emission and consumers' allocated cost. In order to consider some environmental and operational effects of congestion, an environmental constrained active-reactive optimal power flow (AROPF) considering capability curve is presented. On outage conditions, the total cost of the system will increase. On the other hand in power systems, the operating cost and system emission have conflicted objectives, then it may be concluded that the outage in the system may lead to a total emission decrease. In this paper the famous Aumann-Shapley method is used as a pricing methodology. Two case studies such as 14-bus and US-bus IEEE test systems are conducted. Results demonstrate that, although the line outage in power systems leads to increase the total cost, the amount of emission depending on the place where the outage occurs can be more than, less than or equal to the normal conditions' emission. Also results show that although from power sellers' standpoint the well-known Aumann-Shapley method is a precise pricing method to cover the incurred cost with an acceptable error that can show the real effect of congestion on consumers' cost, from consumers' standpoint it is not a good method for cost allocation, because some consumers will face with an increase in cost and the others will face with a decrease on their cost.

Interface com o AEDROMO (Ambiente experimental e didático com robôs móveis) utilizando sistema Android

The AEDROMO (Experimental and Didactic Environment with Mobile Robots) is a versatile, user friendly and scalable environment that supports a wide range of experiments. In it there is an area that is similar to a desk where objects can interact with each other, including robots and other objects, and thus can perform numerous activities. In it's current state, AEDROMO has client computers that interact with the system through an interface, and thus realize the communication between the user and AEDROMO. This project offer support to create a new form of interface for AEDROMO and can therefore be used for devices running Android, the app developed in this project will serve as a basis for future work on this new interface

Desenvolvimento de objeto de aprendizagem para dispositivos móveis explorando os sensores internos do sistema operacional Android

The traditional model of teaching little is modernized in recent decades. When in contact with this system, it is normal that the new-generation students feel unmo tivated in carrying out the proposed activities in the classroom. Considers Prensky (2001) these students, called Digital Natives, born with a modern way of thinking and learn and feel encouraged and motivated with activities that invite to interact. For this reason, it has been proposed the development of an object of learning in the form of application for Android tablets, exploring the internal sensors available in them, with the purpose of offering an interactive activity to students on the physical concepts involved in the process of photosynthesis in plants. For the construction, informational texts written in didactic language and easy to understand, illustrative images and animations were employed. In addition, we used the light sensor in the interactive activity on the process of photosynthesis so that the student could observe and understand how the environment is able to interfere with this process

A Fixed Netting System as a Means of Excluding Birds From a Domestic Waste Landfill

Many bird species are attracted to landfills which take domestic or putrescible waste. These sites provide a reliable, rich source of food which can attract large concentrations of birds. The birds may cause conflicts with human interest with respect to noise, birds carrying litter off site, possible transmission of pathogens in bird droppings and the potential for birdstrikes. In the UK there is an 8 mile safeguarding radius around an airfield, within which any planning applications must pass scrutiny from regulatory bodies to show they will not attract birds into the area and increase the birdstrike risk. Peckfield Landfill site near Leeds, West Yorkshire was chosen for a trial of a netting system designed to exclude birds from domestic waste landfills. The site was assessed for bird numbers before the trial, during the netting trial and after the net had been removed. A ScanCord net was installed for 6 weeks, during which time all household waste was tipped inside the net. Gull numbers decreased on the site from a mean of 1074 per hourly count to 29 per hourly count after two days. The gull numbers increased again after the net had been removed. Bird concentrations in the surroundings were also monitored to assess the effect of the net. Bird numbers in the immediate vicinity of the landfill site were higher than those further away. When the net was installed, the bird concentrations adjacent to the landfill site decreased. Corvids were not affected by the net as they fed on covered waste which was available outside the net throughout the trial. This shows that bird problems on a landfill site are complex, requiring a comprehensive policy of bird control. A supporting bird scaring system and clear operating policy for sites near to airports would be required.

ANALYSIS OF MANGROVE FOREST SUCCESSION, USING SEDIMENT CORES: A CASE STUDY IN THE CANANEIA-IGUAPE COASTAL SYSTEM, SAO PAULO-BRAZIL

Sediment cores are an essential tool for the analysis of the dynamics of mangrove succession. Coring was used to correlate changes in depositional environments and lateral sedimentary facies with discrete stages of forest succession at the Cananeia-Iguape Coastal System in southeastern Brazil. A local level successional pattern was examined based on four core series T1) a sediment bank; T2) a smooth cordgrass Spartina alterniflora bank; T3) an active mangrove progradation fringe dominated by Laguncularia racemosa, and; T4) a mature mangrove forest dominated by Avicennia schaueriana. Cores were macroscopically described in terms of color, texture, sedimentary structure and organic components. The base of all cores exhibited a similar pattern suggesting common vertical progressive changes in depositional conditions and subsequent successional colonization pattern throughout the forest. The progradation zone is an exposed bank, colonized by S. alterniflora. L. racemosa, replaces S. alterniflora as progradation takes place. As the substrate consolidates A. schaueriana replaces L. racemosa and attains the greatest structural development in the mature forest. Cores collected within the A. schaueriana dominated stand contained S. alterniflora fragments near the base, confirming that a smooth cordgrass habitat characterized the establishment and early seral stages. Cores provide a reliable approach to describe local-level successional sequences in dynamic settings subject to drivers operating on multiple temporal and spatial scales where spatial heterogeneity can lead to multiple equilibria and where similar successional end-points may be reached through convergent paths.

Robust and optimal adjustment of Power System Stabilizers through Linear Matrix Inequalities

This work presents the application of Linear Matrix Inequalities to the robust and optimal adjustment of Power System Stabilizers with pre-defined structure. Results of some tests show that gain and zeros adjustments are sufficient to guarantee robust stability and performance with respect to various operating points. Making use of the flexible structure of LMI's, we propose an algorithm that minimizes the norm of the controllers gain matrix while it guarantees the damping factor specified for the closed loop system, always using a controller with flexible structure. The technique used here is the pole placement, whose objective is to place the poles of the closed loop system in a specific region of the complex plane. Results of tests with a nine-machine system are presented and discussed, in order to validate the algorithm proposed. (C) 2012 Elsevier Ltd. All rights reserved.

Pervasive multimedia guidance system for special needs passengers on public transport

[EN] This article presents a practical case of a pervasive multimedia guidance system for public transport passengers. In order to provide useful information to passengers, the system is capable of operating and adapting spontaneously to the different parts of a public transport network, using local data communication technologies. The multimedia data provided by the system are highly accessible, and adapt to the passengers' preferences, and are consequently suitable for special needs passengers. To this end, a paradigm of pervasive computing has been applied.

Aplicación para dispositivos móviles basados en Android para la consulta y gestión de reservas de vuelos de la aerolínea Canaryfly

[ES]El actual proyecto consiste en la implementación de un primer prototipo de la aplicación basada en dispositivos Android que la empresa Canaryfly, una aerolínea canaria, ofrecerá a sus clientes con el objetivo  de facilitarles información de sus vuelos y la posibilidad de gestionar sus reservas. La aplicación final pretende ser una extensión del sistema actual de Canaryfly, dado que el objetivo que se persigue  es el de ofrecer las mismas funcionalidades que ofrece la página web. Las funcionalidades desarrolladas para este proyecto han sido la creación de formularios para realizar la solicitud de presupuestos para vuelos especiales, dígase chárter y vuelos en grupo. También se ha creado un primer sistema de facturación online y otro formulario para la recuperación de datos de una reserva, además del formulario para la búsqueda de vuelos.

SweetRunner : juego de plataforma estilo runner para Android

[ES] El primordial objetivo del presente Trabajo de Final de Título (TFT) es realizar un juego de plataforma estilo runner para dispositivos móviles con sistema Android, y por medio de este, realizar un análisis de las diferentes herramientas que se pueden emplear para el desarrollo juegos para móvil estilo runner.  El resultado que se obtuvo fue SweetRuner, una aplicación móvil que permite jugar en dispositivos móviles que posean sistema Android en una versión igual o superior a Honeycomb. Las características que posee SweetRunner son: creación aleatoria de los elementos del juego; obstáculos y bonificaciones; aumento de dificultad conforme aumenta la puntuación; cálculo de puntuación y puntuación máxima; finalmente, comunicación con la red social Facebook. El desarrollo de SweetRunner se realizó en el motor de videojuegos Unity3D, ya que es considerado la mejor opción para este tipo de juegos, por las facilidades que brinda y por su sencillez y amigabilidad. La mayoría de las herramientas empleadas en el desarrollo de la app son de software libre, pero también se ha trabajado con software privativo. Es por esta razón que el presente trabajo se distribuye bajo la licencia GNU LGPL versión3, ya que con esta licencia se pueden enlazar a un programa no GPL, que puede ser software libre o no. El presente trabajo tiene el potencial necesario para convertirse en una guía para desarrollar juegos para móviles estilo runner. Esta guía facilitará el proceso de desarrollo y optimización, además de ayudar a entender el funcionamiento y la potencialidad de las diferentes herramientas y componentes que se usaron.