Relationship between citrus productivity and indicators of uniformity in trickle irrigation system


Autoria(s): Saad, João Carlos Cury; Da Silva Jr., Hélio Moreira
Contribuinte(s)

Universidade Estadual Paulista (UNESP)

Data(s)

27/05/2014

27/05/2014

01/12/2012

Resumo

In trickle irrigation systems, the design is based on the pre-established emission uniformity (EU) which is the combined result of the equipment characteristics and its hydraulic configuration. However, this desired value of the EU may not be confirmed by the final project (in field conditions) and neither by the yield uniformity. The hypotheses of this research were: a) the EU of a trickle irrigation system at field conditions is equal to the emission uniformity pre-established in the its design; b) EU has always the lowest value when compared with other indicators of uniformity; c) the discharge variation coefficient (VC) is not equal to production variation coefficient in the operational unit; d) the difference between the discharge variation coefficient and the productivity variation coefficient depends on the water depth applied. This study aimed to evaluate the relationship between EU used in the irrigation system design and the final yield uniformity. The uniformity indicators evaluated were: EU, distribution uniformity (UD) and the index proposed by Barragan & Wu (2005). They were compared estimating the performance of a trickle irrigation system applied in a citrus orchard with dimensions of 400m x 600m. The design of the irrigation system was optimized by a Linear Programming model. The tree rows were leveled in the larger direction and the spacing adopted in the orchard was 7m x 4m. The manifold line was always operating on a slope condition. The sensitivity analysis involved different slopes, 0, 3, 6, 9 and 12%, and different values of emission uniformity, 60, 70, 75, 80, 85, 90 and 94%. The citrus yield uniformity was evaluated by the variation coefficient. The emission uniformity (EU) after design differed from the EU pre-established, more sharply in the initial values lower than 90%. Comparing the uniformity indexes, the EU always generated lower values when compared with the UD and with the index proposed by Barragan. The emitter variation coefficient was always lower than the productivity variation coefficient. To obtain uniformity of production, it is necessary to consider the irrigation system uniformity and mainly the water depth to be applied.

Formato

4621-4627

Identificador

http://elibrary.asabe.org/azdez.asp?JID=5&AID=41981&CID=dall2012&T=2

American Society of Agricultural and Biological Engineers Annual International Meeting 2012, v. 6, p. 4621-4627.

http://hdl.handle.net/11449/73935

2-s2.0-84871768498

2-s2.0-84871768498.pdf

Idioma(s)

eng

Relação

American Society of Agricultural and Biological Engineers Annual International Meeting 2012

Direitos

openAccess

Palavras-Chave #Irrigated citrus #Linear programming #Trickle irrigation #Different slopes #Distribution uniformity #Emission uniformity #Equipment characteristics #Field conditions #In-field #Initial values #Irrigation system design #Irrigation systems #Linear programming models #Operational units #Production variations #Variation coefficient #Water depth #Design #Hydraulic machinery #Orchards #Productivity #Irrigation
Tipo

info:eu-repo/semantics/conferencePaper