6D Visual Odometry with Dense Probabilistic Egomotion Estimation

Proceedings of the International Conference on Computer Vision Theory and Applications, 361-365, 2013, Barcelona, Spain

Real-Time Visual Ground-Truth System for Indoor Robotic Applications

The robotics community is concerned with the ability to infer and compare the results from researchers in areas such as vision perception and multi-robot cooperative behavior. To accomplish that task, this paper proposes a real-time indoor visual ground truth system capable of providing accuracy with at least more magnitude than the precision of the algorithm to be evaluated. A multi-camera architecture is proposed under the ROS (Robot Operating System) framework to estimate the 3D position of objects and the implementation and results were contextualized to the Robocup Middle Size League scenario.

Calibration Method for Underwater Visual Ground-Truth System

This work presents an automatic calibration method for a vision based external underwater ground-truth positioning system. These systems are a relevant tool in benchmarking and assessing the quality of research in underwater robotics applications. A stereo vision system can in suitable environments such as test tanks or in clear water conditions provide accurate position with low cost and flexible operation. In this work we present a two step extrinsic camera parameter calibration procedure in order to reduce the setup time and provide accurate results. The proposed method uses a planar homography decomposition in order to determine the relative camera poses and the determination of vanishing points of detected lines in the image to obtain the global pose of the stereo rig in the reference frame. This method was applied to our external vision based ground-truth at the INESC TEC/Robotics test tank. Results are presented in comparison with an precise calibration performed using points obtained from an accurate 3D LIDAR modelling of the environment.

Probabilistic Egomotion for Stereo Visual Odometry

We present a novel approach of Stereo Visual Odometry for vehicles equipped with calibrated stereo cameras. We combine a dense probabilistic 5D egomotion estimation method with a sparse keypoint based stereo approach to provide high quality estimates of vehicle’s angular and linear velocities. To validate our approach, we perform two sets of experiments with a well known benchmarking dataset. First, we assess the quality of the raw velocity estimates in comparison to classical pose estimation algorithms. Second, we added to our method’s instantaneous velocity estimates a Kalman Filter and compare its performance with a well known open source stereo Visual Odometry library. The presented results compare favorably with state-of-the-art approaches, mainly in the estimation of the angular velocities, where significant improvements are achieved.

No Fate But What We Make: a Case of Full Recovery After Out-of-Hospital Cardiac Arrest

An 80 years old man suffered a cardiac arrest shortly after arrival to his local health department. Basic Life Support was started promptly and nine minutes later, on evaluation by an Advanced Life Support team, the victim was defibrillated with a 200J shock. When orotracheal intubation was attempted, masseter muscle contraction was noticed: on reevaluation, the victim had pulse and spontaneous breathing.Thirty minutes later, the patient had been transferred to an emergency department. As he complained of chest pain, the ECG showed a ST segment depression in leads V4 to V6 and laboratory tests showed cardiac troponine I slightly elevated. A coronary angiography was performed urgently: significant left main plus three vessel coronary artery disease was disclosed.Eighteen hours after the cardiac arrest, a quadruple coronary artery bypass grafting operation was undertaken. During surgery, a fresh thrombus was removed from the middle left anterior descendent artery. Post-operative course was uneventful and the patient was discharged seven days after the procedure. Twenty four months later, he remains asymptomatic.In this case, the immediate call for the Advanced Life Support team, prompt basic life support and the successful defibrillation, altogether, contributed for the full recovery. Furthermore, the swiftness in the detection and treatment of the acute reversible cause (myocardial ischemia in this case) was crucial for long-term prognosis.

A música e o texto visual como forma de motivação na aprendizagem da língua estrangeira

Tese de mestrado em Línguas, Literaturas e Culturas

A construção da marca visual e os media digitais enquanto temes

A construção de uma marca gráfica, signo que se pretende que identifique e sintetize uma entidade, deve ser consciente dos processos, objectivos e modus operandi que integram o seu contexto e tornam este tema ainda hoje um ponto central no design de identidade e no design de comunicação. Ainda assim, assistimos ao surgir de tendências que vão uniformizando várias marcas que procuram, passe o paradoxo, demarcar-se. Meme é um conceito originalmente publicado pelo biólogo Richard Dawkins (Dawkins, 1989), que significa ‘replicador’, sendo uma teoria alternativa para explicar a evolução humana (uma teoria que não depende dos genes, mas sim da noção de imitação: da noção de ideias que se reproduzem de pessoa para pessoa, quase como um vírus). O conceito vem da palavra grega mimeme e significa ‘aquilo que é imitado’. Este conceito foi desenvolvido por Susan Blackmore no livro The Meme Machine (1999) e, mais recentemente, esta autora introduz a ideia de teme – o meme tecnológico. Como explicar, por exemplo, que a recente imagem gráfica da NOS (2014) seja tão similar à da POV, criada por Paula Scher em 2007? E por sua vez, qual a razão da identidade visual da Optimus (magma, 2008) ser também, em certa medida, idêntica à da Nokia Trends Lab (criado por Greenspace), projecto do mesmo ramo de operação das telecomunicações? No modus operandi do trabalho de design de identidade entram em acção os media digitais, tanto no momento de concepção, como no momento de exibição e fruição das marcas gráficas. Assim, as aplicações, o software transformaram-se numa espécie de silent designers (conceito proposto por Gorb e Dumas em 1987), uma vez que são verdadeiros orientadores da resposta visual a um determinado problema: impulsionam direcções na linguagem visual do design, resultando em soluções semelhantes. Dada esta mudança de paradigmas que as novas tecnologias forjaram no zeitgeist do design, este artigo – baseado em parte da investigação de doutoramento em design – versa sobre a construção da marca gráfica e sobre a análise das categorias visuais que operam em cada signo gráfico da marca, bem como os medias digitais onde elas se inscrevem. Visualmente podemos constatar que as características dos nossos processos de percepção e as características dos meios de criação e transmissão das marcas actuam de forma a aproximar as soluções gráficas, resultando, por vezes, em temes. Com o objectivo de gerar debate académico sobre o tema da sintaxe e da retórica visual da marca gráfica, procuramos identificar e visualizar variáveis estruturais comuns das marcas realizadas com uma linguagem advinda do Estilo Internacional e das marcas mais recentes, digitais, fluídas e em sistema aberto, com a intenção de contribuir para implementar uma literacia visual que descodifique este signo icónico, dentro da actual realidade.

Analysis of the Out-Of-Plane Seismic Behavior of Unreinforced Masonry: A Literature Review

Although the issue of the out-of-plane response of unreinforced masonry structures under earthquake excitation is well known with consensus among the research community, this issue is simultaneously one of the more complex and most neglected areas on the seismic assessment of existing buildings. Nonetheless, its characterization should be found on the solid knowledge of the phenomenon and on the complete understanding of methodologies currently used to describe it. Based on this assumption, this article presents a general framework on the issue of the out-of-plane performance of unreinforced masonry structures, beginning with a brief introduction to the topic, followed by a compact state of art in which the principal methodologies proposed to assess the out-of-plane behavior of unreinforced masonry structures are presented. Different analytical approaches are presented, namely force and displacement-based, complemented with the presentation of existing numerical tools for the purpose presented above. Moreover, the most relevant experimental campaigns carried out in order to reproduce the phenomenon are reviewed and briefly discussed.

A simplified four-branch model for the analytical study of the out-of-plane performance of regular stone URM walls

During the last years, several studies have been made aiming to assess the out-of-plane seismic response of unreinforced stone masonry structures. This fact led to the development of a wide variety of models and approaches, ranging from simple kinematic based analytical models up to complex numerical simulations. Nevertheless, for the sake of simplicity, the out-of-plane seismic response of a masonry wall pier may be obtained by means of a simple single-degree-of-freedom system while still providing good results. In fact, despite the assumptions associated with such a simple formulation, it is also true that the epistemic uncertainty inherent with the selection of appropriate input parameters in more complex models may render them truly ineffective. In this framework, this paper focuses on the study of the out-of-plane bending of unreinforced stone masonry walls (cantilevers) by proposing a simplified analytical approach based on the construction of a linearized four-branch model, which is used to characterize the linear and nonlinear response of such structural elements through an overturning moment-rotation relationship. The formulation of the four-branch model is presented and described in detail and the meaningful parameters used for its construction are obtained from a set of experimental laboratory tests performed on six full-scale unreinforced regular sacco stone masonry specimens. Moreover, a parametric analysis aiming to evaluate the effect of these parameters’ variation on the final configuration of the model is presented and critically discussed. Finally, the results obtained from the application of the developed four-branch model on real unreinforced regular sacco stone masonry walls are thoroughly analysed and the main conclusions obtained from its application are summarized.

Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

Simulation of masonry out-of-plane failure modes by multi-body dynamics

The seismic assessment of the local failure modes in existing masonry buildings is currently based on the identification of the so-called local mechanisms, often associated with the out-of-plane wall behavior, whose stability is evaluated by static force-based approaches and, more recently, by some displacement-based proposals. Local mechanisms consist of kinematic chains of masonry portions, often regarded as rigid bodies, with geometric nonlinearity and concentrated nonlinearity in predefined contact regions (unilateral no-tension behavior, possible sliding with friction). In this work, the dynamic behavior of local mechanisms is simulated through multi-body dynamics, to obtain the nonlinear response with efficient time history analyses that directly take into account the characteristics of the ground motion. The amplification/filtering effects of the structure are considered within the input motion. The proposed approach is validated with experimental results of two full-scale shaking-table tests on stone masonry buildings: a sacco-stone masonry façade tested at Laboratório Nacional de Engenharia Civil and a two-storey double-leaf masonry building tested at European Centre for Training and Research in Earthquake Engineering (EUCENTRE).

Tuberculosis among HIV-1-infected subjects in a tertiary out-patient service in São Paulo city, Brazil

TB is currently considered to be the most important infectious disease among HIV-1-infected subjects in developing countries, such as Brazil. A retrospective analysis of TB cases was performed, occurring from January 1995 to December 2010 in our cohort of 599 HIV positive patients. The primary outcome was the occurrence of active TB. Forty-one TB cases were diagnosed over this period of 16 years, among 599 HIV positive patients in an open cohort setting in the city of Sao Paulo, Brazil. All-time lowest mean CD4 T cell count at the time of TB diagnosis was 146 and 186 cells/mm³, respectively. The mean HIV viral load was 5.19 log10 copies/mL, and 59% of the patients were on HAART. TB incidence was 1.47 per 100 person-years, for a total follow-up time of 2775 person-years. The probability of surviving up to 10 years after diagnosis was 75% for TB patients as opposed to 96% for patients with other, non-TB opportunistic diseases (p = 0.03). TB can be considered a public health problem among people living with HIV in Brazil despite of the widespread use of antiretrovirals for the treatment of HIV infection/AIDS.

Algorithms for information extraction and signal annotation on long-term biosignals using clustering techniques

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Melhoria do planeamento e abastecimento à montagem

Para conseguir responder às exigências atuais dos mercados, as indústrias necessitam de ser flexíveis, ou seja, é necessário terem a capacidade de adaptar o seu funcionamento e os seus produtos às alterações que se sucedem. Como forma de responder a este facto, o funcionamento da empresa assenta numa produção flexível para conseguir que os seus produtos que abranjam diferente o maior número possível de clientes. No entanto esta metodologia tem apresentado alguns problemas na sua implementação, por isso com o objetivo de obter uma produção mais eficaz e eficiente, a empresa tem canalizado esforços para a melhoria contínua das linhas de montagem. O trabalho desenvolvido na FUTE está enquadrado com a melhoria contínua e visa o processo de abastecimento dos diversos materiais necessários para a produção, característica fundamental para que as linhas possam produzir de forma contínua. Este estudo iniciou-se por analisar o método de abastecimento e identificar os seus problemas e causas, para que posteriormente com o auxílio dos conhecimentos adq uiridos, fosse possível conceber soluções. Os resultados apresentados neste trabalho demonstram que as melhorias implementadas a nível de organização de armazéns, métodos de trabalho e meios de transporte de materiais permitem diminuir o tempo e os recursos necessários durante o processo de abastecimento, além de melhorar condições de trabalho dos operários.

Contributos das TIC para as Necessidades Educativas Especiais - Treino da Perceção Visual

As novas tecnologias de informação e comunicação vêm introduzir novas abordagens e orientações nas relações das pessoas no mundo global, ao mesmo tempo que vêm redefinir paradigmas diversos em várias áreas disciplinares, nomeadamente nas áreas da saúde e da educação. A massificação das tecnologias vem assim aproximar a informação e o conhecimento das pessoas e a sua utilização no apoio aos processos de ensino e de aprendizagem dos alunos com necessidades educativas especiais e dificuldades de aprendizagem específicas tem vindo a ser discutida cada vez mais com uma maior relevância. Pretende-se através da presente dissertação contribuir com soluções que apoiem a desmaterialização dos processos e desburocratização dos relacionamentos entres os diversos intervenientes num processo de terapia de uma criança. Apesar de poder ser extensível a outros cenários, o projeto desenvolvido aplica-se ao caso concreto de crianças com necessidades educativas especiais e dificuldades de aprendizagem específicas, motivadas por dificuldades de perceção visual, que obrigam, além da adoção de programas de treino, como jogos interativos, a um acompanhamento integrado de todos os intervenientes na sua terapia: terapeutas, professores, pais e educadores, assistentes sociais entre outros, tornando-se fundamental a utilização de uma plataforma universal que permita a troca e sistematização de informações. Inicialmente foi necessário um enquadramento desta temática por via da leitura, pesquisa e reuniões com elementos ligados a diferentes áreas que intervém no tratamento de necessidades educativas especiais. Depois de uma pesquisa bibliográfica inicial sobre as dimensões a explorar, recolheu-se informação sobre estudos e projetos desenvolvidos para apoiar esta área, e desenvolveu-se um projeto destinado a contribuir para o trabalho positivo de todos os profissionais que se dedicam à terapia/tratamento das crianças com necessidades educativas especiais, particularmente derivadas de dificuldades de perceção visual. Posteriormente, realizou-se a avaliação do protótipo de forma a validar o real contributo do sistema na melhoria da comunicação e partilha de informação entre todos os intervenientes no processo de terapia de crianças com necessidades educativas especiais e da utilização das tecnologias interativas no treino da perceção visual. Com vista a uma futura implementação de um recurso educativo deste âmbito, foram também recolhidos os pontos negativos e sugestões de melhoria a incorporar. Em suma, este trabalho valida os contributos das TIC, e deste sistema em particular, na relação dos intervenientes num processo de terapia interdisciplinar e no treino da perceção visual.