Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.

Natural blood feeding and temperature shift modulate the global transcriptional profile of Rickettsia rickettsii infecting its tick vector

Rickettsia rickettsii is an obligate intracellular tick-borne bacterium that causes Rocky Mountain Spotted Fever (RMSF), the most lethal spotted fever rickettsiosis. When an infected starving tick begins blood feeding from a vertebrate host, R. rickettsii is exposed to a temperature elevation and to components in the blood meal. These two environmental stimuli have been previously associated with the reactivation of rickettsial virulence in ticks, but the factors responsible for this phenotype conversion have not been completely elucidated. Using customized oligonucleotide microarrays and high-throughput microfluidic qRT-PCR, we analyzed the effects of a 10 degrees C temperature elevation and of a blood meal on the transcriptional profile of R. rickettsii infecting the tick Amblyomma aureolatum. This is the first study of the transcriptome of a bacterium in the genus Rickettsia infecting a natural tick vector. Although both stimuli significantly increased bacterial load, blood feeding had a greater effect, modulating five-fold more genes than the temperature upshift. Certain components of the Type IV Secretion System (T4SS) were up-regulated by blood feeding. This suggests that this important bacterial transport system may be utilized to secrete effectors during the tick vector's blood meal. Blood feeding also up-regulated the expression of antioxidant enzymes, which might correspond to an attempt by R. rickettsii to protect itself against the deleterious effects of free radicals produced by fed ticks. The modulated genes identified in this study, including those encoding hypothetical proteins, require further functional analysis and may have potential as future targets for vaccine development.

Molekulare Evolution der Intermediärfilament-Proteine des Flussneunauges Lampetra fluviatilis

Über cDNA-Banken und RT-PCR wurden erstmals 15 Intermediärfilament-Proteine (IF-Proteine) des Flussneunauges Lampetra fluviatilis (Agnatha, kieferlose Wirbeltiere) kloniert und sequenziert: drei Typ I-Keratine, vier Typ II-Keratine, fünf keratinartige IF-Proteine (drei Kγ, zwei Kα), die Typ III-Proteine Vimentin und Desmin sowie ein Typ IV-Neurofilament-Protein (NF).Die IF-Proteine wurden aus verschiedenen Organen isoliert und durch zweidimensionale Polyacrylamid-Gelelektrophorese (2D-PAGE) aufgetrennt. Biochemische sowie massenspektrometrische Analysen anhand der 2D-PAGE ermöglichten in Kombination mit den Sequenzdaten die Identifizierung von Vimentin, Desmin sowie aller sequenzierten Keratine bis auf zwei der fünf Kα/Kγ-Proteine. Die meisten Keratine ließen sich darüber hinaus in die Kategorien „E“ (von „epidermal“) und „S“ (von „simple epithelial“) einteilen.Von den sequenzierten Keratinen ist das IIS-Keratin K8 wahrscheinlich ortholog zu den bekannten K8-Sequenzen höherer Vertebraten. Die Bezeichnung K18 für das einzige IS-Keratin des Neunauges in Anlehnung an das IS-Keratin K18 des Menschen basiert auf der stets beobachteten Koexpression mit K8 in einfachen Epithelien.Die Sequenz des Neunaugen-Vimentins zeigt große Übereinstimmungen mit den bekannten Desminsequenzen der Vertebraten. Die keratinartigen Proteine Kα und Kγ sind bis jetzt nur von Agnathen (Neunaugen und Schleimaale) bekannt.In molekularen Stammbäumen können K8, K18, Vimentin, Desmin und das NF_L des Neunauges gut als Außengruppe definiert werden.

Untersuchungen zur Pathogenese der "Bypass graft disease"

Untersuchung zur Pathogenese der 'Bypass graft disease' Histomorphologische Untersuchungen und in vitro Zellkulturanalysen bilden die Grundlage für Fortschritte im Verständnis der pathologischen Mechanismen der aortokoronaren 'Bypass graft disease'. In der vorliegenden Arbeit wurde die pathomorphologische Veränderung der Gefäßanatomie im Verlauf der 'Bypass graft disease' an Hand histologischer Präparate explantierter humaner venöser Bypass-Läsionen analysiert. Erstmalig wurde ein histomorphologisches Klassifizierungsschema (Typ I - Typ III) beschrieben. Morphometrische Analysen zeigten, dass die Fläche der Neointima und Media im Verlauf der pathologischen Umgestaltung der Bypass-Architektur (Typ I zu Typ III) deutlich zunimmt. Bestimmungen der Zelldichte dokumentierten eine deutlich größere Zellzahl in allen Gefäßwandschichten der Bypass-Läsionen bei der Gegenüberstellung mit einer Kontrollgruppe nativer Venen, wobei im Verlauf der 'Bypass graft disease' (Typ I zu Typ III) eine Abnahme der Zelldichte zu beobachten war. Erstmalig durchgeführte Untersuchungen zur Proliferationsaktivität in aortokoronaren Bypass-Läsionen im Vergleich zu nativen Gefäßen präsentierten eine deutlich höhere zelluläre Proliferation in den Bypass-Präparaten. Diese war am stärksten in Typ III Läsionen ausgeprägt. Expressionsstudien im in vitro Zellkulturmodellsystem identifiziereten die homodimeren Isotypen (AA / BB) des Wachstumsfaktors PDGF als Stimulatoren der Transkriptionsfaktoren c-fos und c-myc in primärkultivierten humanen Muskelzellen der Aorta.

Zur Evolution des Cytoskeletts beim Sibirischen Stör Acipenser baeri

Im Rahmen meiner Arbeit wurden erstmals die Intermediärfilament-Proteine (IF-Proteine) des Sibirischen Störs Acipenser baeri (Strahlenflosser, Knorpelganoid) kloniert und sequenziert. Aus einer cDNA-Bank konnten die Sequenzen von 13 IF-Proteine gewonnen werden. Von insgesamt zehn Keratinen codieren sieben für Typ I-Keratine und drei für Typ II. Zusätzlich konnten noch Desmin, Vimentin und ein Lamin identifiziert werden. Je einem Typ I- (K13) und einem Typ-II-Keratin (K2) fehlen wenige Aminosäuren in der Head-Domäne.Cytoskelett-Präparationen aus Epidermis, Mitteldarm, Magen und Kieme wurden mittels 2D-PAGE aufgetrennt. Durch Einsatz des CKBB-Test und Immunoblots wurden die verschiedenen Typ I und II-Keratine sowie Desmin und Vimentin identifiziert. Die gewebsspezifische Expression der Keratine ermöglichte zumeist ihre Einteilung in 'E' (epidermal) und 'S' ('simple epithelial').Die MALDI-MS-Analyse einer 2D-PAGE-Koelektrophorese von Seitenflosse und Mitteldarm zeigte, daß die 34 vorhandenen Proteinflecke auf nur 13 verschiedene IF-Proteine zurückgehen. Neun dieser Flecke konnten Sequenzen zugewiesen werden. Zusammen mit den verbleibenden vier Proteinflecken ergeben sich für den Stör nunmehr insgesamt 17 bekannte IF-Proteine. Von drei biochemisch identifizierten IS-Keratinen kommt eines nur im Mitteldarm vor und nur einem konnte eine Sequenz zugeordnet werden (K18). Dem einzigen Typ IIS-Keratin konnte keine Sequenz zugeordnet werden, wahrscheinlich handelt es sich um dabei um das K8-Orthologe. Jedem der fünf Typ IE-Proteine konnte eine Sequenz zugeordnet werden (K10 bis K14), ebenso wie dem einzigen identifizierten Typ IIE-Keratin (K2). Von den Typ III-Proteinen wurden Desmin und Vimentin ihren Proteinflecken zugeordnet. Die nicht zugeordnete Sequenz aba-k1 codiert möglicherweise für ein IIE-Keratin, während aba-k15 vermutlich die Sequenz für ein IE-Keratin enthält. Bei den Proteinflecken, denen eine Sequenz zugeordnet werden konnten, kann für Aba-K2 die Zugehörigkeit zum IIE-Typ angenommen werden, während es sich bei Aba-K10 wahrscheinlich um ein IE-Keratin handelt.Durch Datenbankvergleiche und molekulare Stammbäume konnte die Zugehörigkeit der identifizierten Lamin-Sequenz zum B3-Subtyp der Vertebraten gezeigt werden.Die Daten der Biochemie und indirekten Immunfluoreszenzmikroskopie zeigen, daß Keratine in Epithelien und Vimentin in mesenchymalen Geweben vorkommen. Es existieren starke Hinweise, daß im letzten Gewebetyp Keratine auch koexprimiert werden. Desmin kommt in großen Mengen im Magen und im Mitteldarm vor und stellt dort das prominenteste Protein.Mit den gewonnenen Sequenzdaten wurden molekulare Stammbäume und Sequenzidentitäten berechnet. Die daraus resultierenden Konsequenzen für die Verwandtschaftsverhältnisse der verschiedenen IF-Proteine sowie der Wirbeltiere werden diskutiert.

Cell-free cryopreserved arterial allografts from multiorgan donors: a new strategy to fabricate artificial blood vessels suited for peripheral vascular surgery

Critical lower limb ischemia is a severe disease. A common approach is infrainguinal bypass. Synthetic vascular prosthesis, are good conduits in high-flow low-resistance conditions but have difficulty in their performance as small diameter vessel grafts. A new approach is the use of native decellularized vascular tissues. Cell-free vessels are expected to have improved biocompatibility when compared to synthetic and are optimal natural 3D matrix templates for driving stem cell growth and tissue assembly in vivo. Decellularization of tissues represent a promising field for regenerative medicine, with the aim to develop a methodology to obtain small-diameter allografts to be used as a natural scaffold suited for in vivo cell growth and pseudo-tissue assembly, eliminating failure caused from immune response activation. Material and methods. Umbilical cord-derived mesenchymal cells isolated from human umbilical cord tissue were expanded in advanced DMEM. Immunofluorescence and molecular characterization revealed a stem cell profile. A non-enzymatic protocol, that associate hypotonic shock and low-concentration ionic detergent, was used to decellularize vessel segments. Cells were seeded cell-free scaffolds using a compound of fibrin and thrombin and incubated in DMEM, after 4 days of static culture they were placed for 2 weeks in a flow-bioreactor, mimicking the cardiovascular pulsatile flow. After dynamic culture, samples were processed for histological, biochemical and ultrastructural analysis. Discussion. Histology showed that the dynamic culture cells initiate to penetrate the extracellular matrix scaffold and to produce components of the ECM, as collagen fibres. Sirius Red staining showed layers of immature collagen type III and ultrastructural analysis revealed 30 nm thick collagen fibres, presumably corresponding to the immature collagen. These data confirm the ability of cord-derived cells to adhere and penetrate a natural decellularized tissue and to start to assembly into new tissue. This achievement makes natural 3D matrix templates prospectively valuable candidates for clinical bypass procedures

Spin-crossover in metallomesogens of iron(II)

Covalent grafting mesogenic groups to the coordination cores of the parent mononuclear low-spin and spin-crossover compounds afforded metallomesogenic complexes of iron(II). In comparison with the parent complexes the spin-crossover properties of the alkylated derivatives are substantially modified. The type of the modification was found to be dependent on the properties of the parent system and the nature of the used anion, however, the general tendency is the destabilization of the low-spin state at the favor of spin-crossover or high-spin behavior below 400 K. The structural insight revealed the micro-segregated layered organization. The effect of the alkylation of the parent compounds consists first of all in the change of the lattice to a two-dimensional lamellar one retaining significant intermolecular contacts only within the ionic bilayers. The comprehensive analysis of the structural and thermodynamic data in the homologous series pointed at the mechanism of the interplay between the structural modification on melting and the induced anomalous change of the magnetic properties. A family of one-dimensional spin-crossover polymers was synthesized and characterized using a series of spectroscopic methods, X-ray powder diffraction, magnetic susceptibility measurements and differential scanning calorimetry. The copper analogue of was also synthesized and its crystal structure solved. In comparison with the mononuclear systems, the polymeric mesogens of iron(II) are less sensitive to the glass transition, which was attributed to the moderate concomitant variation of the structure. Nevertheless, the observed increase of the magnetic hysteresis with lengthening of the alkyl substituents was ascribed to the interplay of the structural reorganization of the coordination core due to spin-crossover with the structural delay in the spatial reorganization of the mesogenic substituents. The classification of mononuclear and polymeric metallomesogens according to the interactions between the structural- and the spin-transition and analysis of the data on the reported spin-crossover metallomesogens led to the separation of three types, namely: Type i: systems with coupling between the electronic structure of the iron(II) ions and the mesomorphic behavior of the substance; Type ii: systems where both transitions coexist in the same temperature region but are not coupled due to competition with the dehydration or due to negligible structural transformation; Type iii: systems where both transitions occur in different temperature regions and therefore are uncoupled. Fine-tuning, in particular regarding the temperature at which the spin-transition occurs with hysteresis properties responsible for the memory effect, are still a major challenge towards practical implementation of spin-crossover materials. A possible answer to the problem could be materials in which the spin-crossover transition is coupled with another transition easily controllable by external stimuli. In the present thesis we have shown the viability of the approach realized in the mesogenic systems with coupled phase- and spin-transitions.

Transcriptional responses of the Helicobacter pylori cag pathogenicity island

The severity of Helicobacter pylori infections largely depends on the genetic diversity of the infecting strain, and particularly on the presence of the cag pathogenicity island (cag-PAI). This virulence locus encodes a type-IV secretion system able to translocate in the host cell at least the cag-encoded toxin CagA and peptidoglycan fragments, that together are responsible for the pathogenic phenotype in the host. Little is known about the bacterial regulators that underlie the coordinated expression of cag gene products, needed to assemble a functional secretion system apparatus. To fill this gap, a comprehensive analysis of the transcriptional regulation of the cag-PAI operons was undertaken. To pursue this goal, a robust tool for the analysis of gene expression in H. pylori was first implemented. A bioluminescent reporter system based on the P. luminescens luxCDABE operon was constructed and validated by comparisons with transcriptional analyses, then it was systematically used for the comprehensive study and mapping of the cag promoters. The identification of bona fide cag promoters had permitted to pinpoint the set of cag transcriptional units of the PAI. The responses of these cag transcriptional units to metabolic stress signals were analyzed in detail, and integrated with transcription studies in deletion mutants of important H. pylori virulence regulators and protein-DNA interaction analyses to map the binding sites of the regulators. Finally, a small regulatory RNA cncR1 encoded by the cag-PAI was identified, and the 5’- and 3’-ends of the molecule were mapped by primer extension analyses, northern blot and studies with lux reporter constructs. To identify regulatory effects exerted by cncR1 on the H. pylori gene expression, the cncR1 knock out strain was derived and compared to the parental wild type strain by a macroarray approach. Results suggest a negative effect exerted by cncR1 on the regulome of the alternative sigma54 factor.

Exploring the biofilm of Streptococcus agalactiae to identify virulence factors

Streptococcus agalactiae, also known as Group B Streptococcus (GBS) is the primary colonizer of the anogenital mucosa of up to 40% of healthy women and an important cause of invasive neonatal infections worldwide. Among the 10 known capsular serotypes, GBS type III accounts for 30-76% of the cases of neonatal meningitis. Biofilms are dense aggregates of surface-adherent microorganisms embedded in an exopolysaccharide matrix. Centers for Disease Control and Prevention estimate that 65% of human bacterial infections involve biofilms (Post et al., 2004). In recent years, the ability of GBS to form biofilm attracted attention for its possible role in fitness and/or virulence. Here, a new in vitro biofilm formation protocol was developed to guarantee more stringent conditions, to better discriminate between strong-, low- and non- biofilm forming strains and reduce ambiguous data interpretation. This protocol was applied to screen the in vitro biofilm formation ability of more than 350 GBS clinical isolates from pregnant women and neonatal infections belonging to different serotype, in relation to media composition and pH. The results showed the enhancement of GBS biofilm formation in acidic condition and identified a subset of isolates belonging to serotypes III and V that forms strong biofilms in these conditions. Interestingly, the best biofilm formers belonged to the serotype III hypervirulent clone ST-17.It was also found that pH 5.0 induces down-regulation of the capsule but that this reduction is not enough by itself to ensure biofilm formation. Moreover, the ability of proteinase K to strongly inhibit biofilm formation and to disaggregate mature biofilms suggested that proteins play an essential role in promoting GBS biofilm formation and contribute to the biofilm structural stability. Finally, a set of proteins potentially expressed during the GBS in vitro biofilm formation were identified by mass spectrometry.

Untersuchungen zur Funktion multipler DnaJ-Proteine in dem Cyanobakterium Synechocystis sp. PCC 6803

Sowohl in Synechocystis sp. PCC 6803 als auch in anderen Cyanobakterien konnten multiple DnaJ-Proteine nachgewiesen werden, deren Funktion jedoch noch weitestgehend unverstanden ist. Im Rahmen dieser Arbeit wurden die Funktionen der multiplen DnaJ-Proteine von Synechocystis sp. charakterisiert. Das DnaJ-Protein, Sll0897 gehört aufgrund seiner Domänenstruktur zu den Typ I-Proteinen, Slr0093 und Sll1933 zu den Typ II-Proteinen und Sll0909, Sll1011, Sll1384 und Sll1666 zu den Typ III DnaJ-Proteinen. Durch Komplementationsstudien des E. coli ΔdnaJ-Stammes OD259 konnte eine Komplementation des Wachstumsdefekts bei höheren Temperaturen durch die Proteine Slr0093 und Sll0897 gezeigt werden. In Synechocystis war eine komplette Disruption von sll1933 nicht möglich, weshalb das Protein Sll1933 unter normalen Wachstumsbedingungen essentiell ist. Doppelte Insertionmutationen waren lediglich bei der Kombination der Gene sll0909 und sll1384 möglich. Untersuchungen des Wachstumsverhaltens der dnaJ-Disruptions-stämme unter Hitze- und Kältestressbedingungen zeigten, dass das Protein Sll0897 eine wichtige Funktion bei der Stressantwort in Synechocystis besitzt und unter Hitzestressbedingungen essentiell ist. Eine vollständige Deletion des Gens sll0897 war Synechocystis sp. bereits unter normalen Wachstumsbedingungen nicht möglich. Bei den für ein Wachstum mindestens notwendigen Domänen des Sll0897 handelt es sich um die charakteristische J-Domäne und die Glycin-Phenylalanin-reiche Domäne. Unter Hitzestressbedingungen ist das Volllängen-Protein Sll0897 für ein Wachstum essentiell. rnNeben den in vivo Wachstumsexperimenten wurde eine Methode zur heterologen Expression der sieben DnaJ-Proteine in E. coli und einer nativen Reinigung von Slr0093, Sll0897, Sll0909 und Sll1666 etabliert. Untersuchungen zur Thermostabilität der gereinigten Proteine zeigten für das Slr0093 und Sll1666 einen reversiblen Prozess, wodurch sie auch nach dem Hitzestress noch als Faltungshelfer fungieren können. Bei den Proteinen Sll0897 und Sll0909 ist der Prozess jedoch nicht reversibel, so dass sie nach Hitzestresseinwirkung neu synthetisiert oder durch Chaperoneinwirkung korrekt gefaltet werden müssen. Die Affinitäts-„Pull-Down“ Analysen lieferten keine klaren Hinweise auf die DnaK-Interaktionspartner der Proteine Slr0093, Sll0897, Sll0909 und Sll1666, weshalb weitere Untersuchungen notwendig sind. Mit Hilfe der Gelfiltrationsanalysen konnten die errechneten molaren Massen der Proteine Slr0093 und Sll1666 bestätigt und beide Proteine in einer monomeren Form nachgewiesen werden. Die DnaJ-Proteine Sll0897 und Sll0909 konnten in zwei oligomeren Zuständen detektiert werden. Analysen der ATPase-Aktivität des DnaK2-Proteins alleine und des DnaK2-Proteins zusammen mit den DnaJ-Proteinen Slr0093, Sll0897, Sll0909 und Sll1666 zeigten eine Steigerung der ATP-Hydrolyserate bei der Interaktion von DnaK und DnaJ, wobei Sll0897 die größte Steigerung der ATPase-Aktivität des DnaK2 induzierte.

Specific processing of tenascin-C by the metalloprotease meprinbeta neutralizes its inhibition of cell spreading

The metalloprotease meprin has been implicated in tissue remodelling due to its capability to degrade extracellular matrix components. Here, we investigated the susceptibility of tenascin-C to cleavage by meprinbeta and the functional properties of its proteolytic fragments. A set of monoclonal antibodies against chicken and human tenascin-C allowed the mapping of proteolytic fragments generated by meprinbeta. In chicken tenascin-C, meprinbeta processed all three major splicing variants by removal of 10kDa N-terminal and 38kDa C-terminal peptides, leaving a large central part of subunits intact. A similar cleavage pattern was found for large human tenascin-C variant where two N-terminal peptides (10 or 15kDa) and two C-terminal fragments (40 and 55kDa) were removed from the intact subunit. N-terminal sequencing revealed the exact amino acid positions of cleavage sites. In both chicken and human tenascin-C N-terminal cleavages occurred just before and/or after the heptad repeats involved in subunit oligomerization. In the human protein, an additional cleavage site was identified in the alternative fibronectin type III repeat D. Whereas all these sites are known to be attacked by several other proteases, a unique cleavage by meprinbeta was located to the 7th constant fibronectin type III repeat in both chicken and human tenascin-C, thereby removing the C-terminal domain involved in its anti-adhesive activity. In cell adhesion assays meprinbeta-digested human tenascin-C was not able to interfere with fibronectin-mediated cell spreading, confirming cleavage in the anti-adhesive domain. Whereas the expression of meprinbeta and tenascin-C does not overlap in normal colon tissue, inflamed lesions of the mucosa from patients with Crohn's disease exhibited many meprinbeta-positive leukocytes in regions where tenascin-C was strongly induced. Our data indicate that, at least under pathological conditions, meprinbeta might attack specific functional sites in tenascin-C that are important for its oligomerization and anti-adhesive activity.

On-table reconstruction of comminuted fractures of the radial head

The most widely accepted treatment for comminuted fractures of the radial head is either the excision or open reduction and internal fixation. The purpose of the present study is to evaluate the value of an 'on-table' reconstruction technique in severely comminuted fractures of the radial head. In this study, two patients with a Mason type-III and four patients with a Mason type-IV radial-head fracture were treated with 'on-table' reconstruction and fixation using low-profile mini-plates. After a mean follow-up of 112 months (47-154 months), the mean elbow motion was 0-6-141 degrees extension flexion with 79 degrees of pronation and 70 degrees of supination. The mean Broberg and Morrey functional rating score was 97.0 points, the Mayo Elbow Performance Index was 99.2 points and the mean Disabilities of the Arm, Shoulder, and Hand (DASH) Outcome Measure score was 1.94 points. One patient had symptoms of degenerative changes, with a slight joint-space narrowing. There were no radiographic signs of devitalisation at final examination. Comminuted fractures of the radial head, which would otherwise require excision, can be successfully treated with an 'on-table' reconstruction technique.

Comminuted fractures of the radial head and neck: is fixation to the shaft necessary?

Mason type III fractures of the radial head are treated by open reduction and internal fixation, resection or prosthetic joint replacement. When internal fixation is performed, fixation of the radial head to the shaft is difficult and implant-related complications are common. Furthermore, problems of devascularisation of the radial head can result from fixation of the plate to the radial neck. In a small retrospective study, the treatment of Mason type III fractures with fixation of the radial neck in 13 cases (group 2) was compared with 12 cases where no fixation was performed (group 1). The mean clinical and radiological follow-up was four years (1 to 9). The Broberg-Morrey index showed excellent results in both groups. Degenerative radiological changes were seen more frequently in group 2, and removal of the implant was necessary in seven of 13 cases. Post-operative evaluation of these two different techniques revealed similar ranges of movement and functional scores. We propose that anatomical reconstruction of the radial head without metalwork fixation to the neck is preferable, and the outcome is the same as that achieved with the conventional technique. In addition degenerative changes of the elbow joint may develop less frequently, and implant removal is not necessary.

Classification of suppressor additives based on synergistic and antagonistic ensemble effects

Three fundamental types of suppressor additives for copper electroplating could be identified by means of potential Transient measurements. These suppressor additives differ in their synergistic and antagonistic interplay with anions that are chemisorbed on the metallic copper surface during electrodeposition. In addition these suppressor chemistries reveal different barrier properties with respect to cupric ions and plating additives (Cl, SPS). While the type-I suppressor selectively forms efficient barriers for copper inter-diffusion on chloride-terminated electrode surfaces we identified a type-II suppressor that interacts non-selectively with any kind of anions chemisorbed on copper (chloride, sulfate, sulfonate). Type-I suppressors are vital for the superconformal copper growth mode in Damascene processing and show an antagonistic interaction with SPS (Bis-Sodium-Sulfopropyl-Disulfide) which involves the deactivation of this suppressor chemistry. This suppressor deactivation is rationalized in terms of compositional changes in the layer of the chemisorbed anions due to the competition of chloride and MPS (Mercaptopropane Sulfonic Acid) for adsorption sites on the metallic copper surface. MPS is the product of the dissociative SPS adsorption within the preexisting chloride matrix on the copper surface. The non-selectivity in the adsorption behavior of the type-II suppressor is rationalized in terms of anion/cation pairing effects of the poly-cationic suppressor and the anion-modified copper substrate. Atomic-scale insights into the competitive Cl/MPS adsorption are gained from in situ STM (Scanning Tunneling Microscopy) using single crystalline copper surfaces as model substrates. Type-III suppressors are a third class of suppressors. In case of type-land type-II suppressor chemistries the resulting steady-state deposition conditions are completely independent on the particular succession of additive adsorption. In contrast to that a strong dependence of the suppressing capabilities on the sequence of additive adsorption ("first comes, first serves" principle) is observed for the type-IIIsuppressor. This behavior:is explained by a suppressor barrier that impedes not only the copper inter-diffusion but also the transport of other additives (e.g. SPS) to the copper surface. (C) 2011 Elsevier Ltd. All rights reserved.

A nonsense mutation in the optic atrophy 3 gene (OPA3) causes dilated cardiomyopathy in Red Holstein cattle

Cardiomyopathies are severe degenerative disorders of the myocardium that lead to heart failure. During the last three decades bovine dilated cardiomyopathy (BDCMP) was observed worldwide in cattle of Holstein-Friesian origin. In the Swiss cattle population BDCMP affects Fleckvieh and Red Holstein breeds. The heart of affected animals is enlarged due to dilation of both ventricles. Clinical signs are caused by systolic dysfunction and affected individuals die as a result of severe heart insufficiency. BDCMP follows an autosomal recessive pattern of inheritance and the disease-causing locus was mapped to bovine chromosome 18 (BTA18). In the present study we describe the successful identification of the causative mutation in the OPA3 gene located on BTA18 that was previously reported to cause 3-methylglutaconic aciduria type III in Iraqi-Jewish patients. We demonstrated conclusive genetic and functional evidence that the nonsense mutation c.343C>T in the bovine OPA3 gene causes the late-onset dilated cardiomyopathy in Red Holstein cattle.