Sleep-wake patterns of student workers and non-workers

Adolescents usually exhibit late sleep phase and irregular sleep patterns. As a result, they do not get enough sleep and report daytime sleepiness. This condition could be aggravated in working students who have a more limited time for sleep. In this survey, we investigated the impact of evening classes and employment on the sleep patterns of adolescents. We compared female (n = 17) and male (n = 14) non-worker students to female (n = 28) and male (n = 20) worker students who attended the same high school. The volunteers (aged 17.4 years +/- 11 months) answered a sleep log during a 16-day period. Worker students slept and woke up earlier, had a shorter nocturnal sleep length and a shorter daily (nocturnal plus diurnal) sleep length compared to non-working pupils. The four groups of students delayed sleep onset time on weekends, but only worker students delayed wake-up time on Sundays. The wake-up time was similar among groups on Sundays. While student workers tended to increase the sleep length in the weekends, non-working students increased it on Mondays and/or Tuesdays. The results showed that sleep schedules and sleep length were different according to the work status. Going to bed later on Saturday by the four groups of students suggests the influence of social activities, while a later wake-up time on Sundays could result from a shorter sleep length on workdays.

Structural evolution up to 1100 degrees C of xerogels prepared from TEOS sonohydrolysis and liquid phase exchanged by acetone

Silica xerogels were prepared from sonohydrolysis of tetraethoxysilane and exchange of the liquid phase of the wet gel by acetone. Monolithic xerogels were obtained by slow evaporation of acetone. The structural characteristics of the xerogels were studied as a function of temperature up to 1100 degrees C by means of bulk and skeletal density measurements, linear shrinkage measurements and thermal analyses (DTA, TG and DL). The results were correlated with the evolution in the UV-Vis absorption. Particularly, the initial pore structure of the dried acetone-exchanged xerogel was studied by small-angle X-ray scattering and nitrogen adsorption. The acetone-exchanged xerogels exhibit greater porosity in the mesopore region presenting greater mean pore size (similar to 4 nm) when compared to non-exchanged xerogels. The porosity of the xerogels is practically stable in the temperature range between 200 degrees C and 800 degrees C. Evolution in the structure of the solid particles (silica network) is the predominant process upon heating up to about 400 degrees C and pore elimination is the predominant process above 900 degrees C. At 1000 degrees C the xerogels are still monolithic and retain about 5 vol.% pores. The xerogels exhibited foaming phenomenon after hold for 10 h at 1100 degrees C. This temperature is even higher than that found for foaming of non-exchanged xerogels. (c) 2005 Elsevier B.V. All rights reserved.

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

Objectives. This study evaluated the durability of bond strength between resin cement and a feldspathic ceramic submitted to different etching regimens with and without silane coupling agent application.Methods. Thirty-two blocks (6.4 mm x 6.4 mm x 4.8 mm) were fabricated using a microparticulate feldspathic ceramic (Vita VM7), ultrasonically cleaned with water for 5 min and randomly divided into four groups, according to the type of etching agent and silanization method: method 1, etching with 10% hydrofluoric (HF) acid gel for I min + silanization; method 2, HF only; method 3, etching with 1.23% acidulated phosphate fluoride (APF) for 5 min + silanization; method 4, APF only. Conditioned blocks were positioned in their individual silicone molds and resin cement (Panavia F) was applied on the treated surfaces. Specimens were stored in distilled water (37 degrees C) for 24 h prior to sectioning. After sectioning the ceramic-cement blocks in x- and Y-axis with a bonded area of approximately 0.6 mm(2), the microsticks of each block were randomly divided into two storage conditions: Dry, immediate testing; TC, thermal cycling (12,000 times) + water storage for 150 d, yielding to eight experimental groups. Microtensile bond strength tests were performed in universal testing machine (cross-head speed: 1 mm/min) and failure types were noted. Data obtained (MPa) were analyzed with three-way ANOVA and Tukey's test (alpha = 0.05).Results. Significant influence of the use of silane (p < 0.0001), storage conditions (p = 0.0013) and surface treatment were observed (p = 0.0014). The highest bond strengths were achieved in both dry and thermocycled conditions when the ceramics were etched with HF acid gel and silanized (17.4 +/- 5.8 and 17.4 +/- 4.8 MPa, respectively). Silanization after HF acid gel and APT treatment increased the results dramatically (14.5 +/- 4.2-17.4 +/- 4.8 MPa) compared to non-silanized groups (2.6 +/- 0.8-8.9 +/- 3.1 MPa) where the failure type was exclusively (100%) adhesive between the cement and the ceramic.Significance. Silanization of the feldspathic ceramic surface after APF or HF acid etching increased the microtensile bond strength results significantly, with the latter providing higher results. Long-term thermocycling and water storage did not decrease the results in silanized groups. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Is the number of antennal plate organs (sensilla placodea) greater in hygienic than in non-hygienic Africanized honey bees?

Hygienic behavior is a desirable trait in honey bees (Apis mellifera L.), as hygienic bees quickly remove diseased brood, intermpting the infectious cycle. Hygienic lines of honey bees appear to be more sensitive to the odors of dead and diseased honey bee brood, and Africanized honey bees are generally more hygienic than are European honey bees. We compared the number of sensilla placodea, antennal sensory structures involved in the perception of odor, in 10 bees from each of six hygienic and four non-hygienic colonies of Africanized honey bees. The sensilla placodea of three of the terminal segments (flagellomeres) of the right antenna of each bee were counted with a scanning electron microscope. There were no significant differences in the mean numbers of sensilla placodea between the hygienic and non-hygienic bees, though the variance was higher in the hygienic group. Flagellomere 4 had significantly more sensilla placodea than flagellomeres 6 and 8. However, there was no significant difference between the other two flagellomeres. As hygienic bees are capable of identifying dead, injured, or infested brood inside a capped brood cell, sensilla placodea probably have an important role in enabling worker bees to sense sick brood. However, we did not find greater numbers of this sensory structure in the antennae of hygienic, compared to non-hygienic Africanized honey bees.

Evaluation of clinical periodontal conditions in smokers and non-smokers

Given that tobacco smoking habit is a risk factor for periodontal diseases, the aim of this study was to compare clinical periodontal aspects between smokers and non-smokers. The clinical status were assessed in 55 patients, 29 smokers and 26 non-smokers, aged 30 to 50 years, with mean age of 40. The clinical parameters used were: probing depth (PD), plaque index (PI), gingival index (GI), clinical attachment level (CAL), gingival recession (GR) and gingival bleeding index (GBI) for arches (upper and lower ) and teeth (anterior and posterior). Tooth loss was also evaluated in both groups. Multiple regression analysis showed: tendency of greater probing depth and clinical attachment level means for smokers; greater amount of plaque in smokers in all regions; greater gingival index means for non-smokers with clinical significance (p<0.05) in all regions. Although, without statistical significance, the analysis showed greater gingival bleeding index means almost always for nonsmokers; similar gingival recession means in both groups and tendency of upper tooth loss in smokers and lower tooth loss in non-smokers. The findings of this study showed that clinical periodontal parameters may be different in smokers when compared to non-smokers and that masking of some periodontal signs can be a result of nicotine's vasoconstrictor effect.

Longitudinal behavioral analysis during dental care of children aged 0 to 3 years

Abstract: When and how the dentist intervenes have repercussions on children's physical and emotional patterns. The objective of the present study was to conduct a longitudinal behavioral analysis during dental care of babies aged 0 to 3 years. A total of 216 patients seen at the Baby Clinic of the School of Dentistry at Araçatuba, São Paulo State University (UNESP), were selected. The selection criterion was attendance at ten dental care sessions at bimonthly intervals for routine procedures such as clinical examination and oral hygiene. There was a predominance of cooperative behavior compared to uncooperative behavior when each visit was analyzed separately. The behavior of the patients must have been directly influenced by their psychomotor development. Constant attendance and exposure of the baby to non-stressful dental stimuli are factors that favor a cooperative behavior.

Interventions to promote the wearing of hearing protection

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Non-conventional vortex configurations in a mesoscopic flat disk

The influence of superficial defects on the vortex configurations of a thin superconducting disk is investigated within the time dependent Ginzburg-Landau formalism. The free energy, magnetization, vorticity, and the Cooper pair density are calculated for both metastable and stable vortex configurations and different number of defects on its surface in the presence of an external magnetic field applied perpendicular to the disk area. We show that the competition between the confinement geometry and the geometric position of the defects leads to non-conventional vortex configurations which are not compatible with the symmetry of the sample geometry.

Acute toxicity and environmental risk of teflubenzuron to Daphnia magna, Poecilia reticulata and Lemna minor in the absence and presence of sediment

This study aimed to estimate the acute toxicity of teflubenzuron (1-(3,5-dichloro-2,4-difluorophenyl)-3-(2,6-difluorobenzoyl)urea) (TFB) for Daphnia magna, Lemna minor and Poecilia reticulata, in the absence and presence of sediment; evaluate the effect of sediment on the TFB bioavailability; and to classify this insecticide according to its environmental poisoning risk for agricultural and aquaculture uses. The tests of TFB acute toxicity were conducted in static system in a completely randomized design with increasing TFB concentrations, and a control group. The TFB has been classified according to the estimated values of EC50 and LC50 by its acute toxicity and environmental risk. The sediment significantly reduced toxicity and bioavailability of TFB in water column. Therefore, the insecticide can be classified as being highly toxic to Daphnia magna, which means the agricultural and aquacultural uses of TFB pose a high risk of environmental toxicity to non-target organisms. However, it was practically non-toxic to L. minor and P. reticulata. © 2013 Copyright Taylor and Francis Group, LLC.

Desenvolvimento de um protocolo para avaliação de habilidades comunicativas de alunos não-falantes em ambiente escolar

Pós-graduação em Educação - FFC

Estudo vocabular de petições jurídicas: ornamentação e rebuscamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ensino a distância: educação ou treinamento no PEC/FOR PROF?

Pós-graduação em Educação - FFC

Ações de formação continuada de professores que ensinam Matemática nos anos iniciais do Ensino Fundamental da rede municipal de Presidente Prudente (SP) e saberes docentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Saberes em campo: a configuração do ensino escolar da educação física no Estado de São Paulo (1964-1985)

Pós-graduação em Educação Escolar - FCLAR

Estudo da influência da granulometria no comportamento reológico de polpa de bauxita e no fator de atrito

O presente trabalho apresenta estudos de caracterização reológica e determinações de fatores de atrito em três polpas de bauxita, originárias da Mina de Miltônia, Paragominas – Pará, resultantes de condições operacionais com graus diferentes de moagem. Deste modo, a diferenciação básica entre as mesmas reside na distribuição granulométrica. O objetivo é fazer uma proposta de revisão da especificação granulométrica do produto (polpa de bauxita para o mineroduto), permitindo uma comparação com as polpas do projeto (planta piloto) e da operação atual (usina de beneficiamento) quanto a resposta a alterações, principalmente, da viscosidade e fatores de atrito. A polpa proposta incorpora um percentual maior de finos (< 10 microns) em relação as demais polpas. Os benefícios possibilitarão ganhos de recuperação com a incorporação desta parcela de finos, a qual atualmente é descartada para a bacia de rejeitos. O material foi caracterizado por análises granulométricas da série Tyler, físicas e físico-químicas, microscopia eletrônica de varredura (MEV) e espectrometria de raios-x dispersiva em energia (EDS). Utilizando-se de um viscosímetro de cilindros coaxiais, tipo Searle, abordo use os aspectos reológicos destas polpas, em função da sua distribuição granulométrica e da variação da concentração de sólidos. As propriedades reológicas avaliadas foram a viscosidade, a tensão de escoamento e também os comportamentos que mostram a dependência da viscosidade com o tempo de aplicação de uma taxa de cisalhamento constante, verificando-se por meio de curva de histerese, a existência ou não da tixotropia e da reopexia. Os resultados experimentais mostraram que para as polpas ensaiadas, a granulometria e a concentração de sólidos são parâmetros relevantes na determinação da viscosidade. Os testes com estas três polpas de bauxita, de granulometrias diferentes, foram realizados a concentrações pré-determinadas, de modo a determinar o modelo reológico cujos parâmetros apresentaram os melhores coeficientes de correlação (R²), sendo que os melhores ajustes encontrados foram segundo o modelo de Herschel-Bulkley. Os fatores de atrito foram obtidos por formulações que envolvem uma relação logarítmica, utilizando-se da Lei da Parede como método de obtenção das expressões aplicáveis a estes fluidos não- Newtonianos viscoplásticos, sendo comparados com os calculados pelas correlações de Dodge e Metzner e verificou-se que de uma maneira geral há a concordância entre o modelo estudado nas três polpas. A análise dos fatores de atrito na concentração de 50% de sólidos, concentração de bombeio por mineroduto, mostra que o comportamento das polpas estudadas é semelhante, com os melhores ajustes para a faixa de 10.000 a 100.000 Reynolds (faixa média de trabalho para o escoamento turbulento de polpas de minério, homogêneas e heterogêneas).