Experimental study using coir geotextiles in watershed management

This paper presents the results of a field experiment conducted in Kerala, South India, to test the effectiveness of coir geotextiles for embankment protection. In the context of sustainable watershed management, coir is a cheap and locally available material 5 that can be used to strengthen traditional earthen bunds or protect the banks of village ponds from erosion. Particularly in developing countries, where coir is abundantly available and textiles can be produced by small-scale industry, this is an attractive alternative for conventional methods

Interactive comment on “Experimental study using coir geotextiles in watershed management

This paper presents the results of a field experiment conducted in Kerala, South India, to test the effectiveness of coir geotextiles for embankment protection. The results reveal that treatment with geotextile in combination with grass is an effective eco-hydrological measure to protect steep slopes from erosion. In the context of sustainable watershed management, coir is a cheap and locally available material that can be used to strengthen traditional earthen bunds or protect the banks of village ponds from erosion. Particularly in developing countries, where coir is abundantly available and textiles can be produced by small-scale industry, this is an attractive alternative for conventional methods. The paper analyses the performance of different treatments with regard to soil moisture content, protection against erosion and biomass production

Investigations on the structural and operational changes of Ring Seine Fishing Systems of Kerala and its Life Cycle Assessment (lCA)

The study covers theFishing capture technology innovation includes the catching of aquatic animal, using any kind of gear techniques, operated from a vessel. Utilization of fishing techniques varies, depending upon the type of fisheries, and can go from a basic and little hook connected to a line to huge and complex mid water trawls or seines operated by large fishing vessels.The size and autonomy of a fishing vessel is largely determined by its ability to handle, process and store fish in good condition on board, and thus these two characteristics have been greatly influenced by the introduction and utilization of ice and refrigeration machinery. Other technological developments especially hydraulic hauling machinery, fish finding electronics and synthetic twines have also had a major impact on the efficiency and profitability of fishing vessels.A wide variety of fishing gears and practices ranging from small-scale artisanal to advanced mechanised systems are used for fish capture in Kerala. Most important among these fishing gears are trawls, seines, lines, gillnets and entangling nets and traps The modern sector was introduced in 1953 at Neendakara, Shakthikulangara region under the initiative of Indo-Norwegian project (INP). The novel facilities introduced in fishing industry by Indo- Norwegian project accordingly are mechanically operated new boats with new fishing nets. Soon after mechanization, motorization programme gained momentum in Kerala especially in Alleppey, Ernakulam and Kollam districts.

Erneuerbare Energien im Verbund mit Hochleistungs-Bleiakkumulatoren zur Bereitstellung von Spitzenleistung - am Beispiel von Windkraftwerken im 20 kV-Versorgungsnetz der CEGEDEL / Luxemburg -

Die wachsende Weltbevölkerung bedingt einen höheren Energiebedarf, dies jedoch unter der Beachtung der nachhaltigen Entwicklung. Die derzeitige zentrale Versorgung mit elektrischer Energie wird durch wenige Erzeugungsanlagen auf der Basis von fossilen Primärenergieträgern und Kernenergie bestimmt, die die räumlich verteilten Verbraucher zuverlässig und wirtschaftlich über ein strukturiertes Versorgungssystem beliefert. In den Elektrizitätsversorgungsnetzen sind keine nennenswerten Speicherkapazitäten vorhanden, deshalb muss die von den Verbrauchern angeforderte Energie resp. Leistung jederzeit von den Kraftwerken gedeckt werden. Bedingt durch die Liberalisierung der Energiemärkte und die geforderte Verringerung der Energieabhängigkeit Luxemburgs, unterliegt die Versorgung einem Wandel hin zu mehr Energieeffizienz und erhöhter Nutzung der dargebotsabhängigen Energiequellen. Die Speicherung der aus der Windkraft erzeugten elektrischen Energie, wird in den Hochleistungs-Bleiakkumulatoren, errichtet im ländlichen Raum in der Nähe der Windkraftwerke, eingespeichert. Die zeitversetzte Einspeisung dieser gespeicherten elektrischen Energie in Form von veredelter elektrischer Leistung während den Lastspitzen in das 20 kV-Versorgungsnetz der CEGEDEL stellt die Innovation in der luxemburgischen Elektrizitätsversorgung dar. Die Betrachtungen beschränken sich somit auf die regionale, relativ kleinräumige Einbindung der Windkraft in die elektrische Energieversorgung des Großherzogtums Luxemburg. Die Integration der Windkraft im Regionalbereich wird in den Vordergrund der Untersuchung gerückt. Überregionale Ausgleichseffekte durch Hochspannungsleitungen der 230/400 kV-Systeme werden außer Acht gelassen. Durch die verbrauchernahe Bereitstellung von elektrischer Spitzenleistung vermindern sich ebenfalls die Übertragungskosten aus den entfernten Spitzenlastkraftwerken, der Ausbau von Kraftwerkskapazitäten kann in die Zukunft verschoben werden. Die Emission von Treibhausgasen in thermischen Kraftwerken wird zum Teil reduziert. Die Berechnungen der Wirtschaftlichkeit von Hybridanlagen, zusammengesetzt aus den Windkraftwerken und den Hochleistungs-Bleiakkumulatoren bringen weitere Informationen zum Einsatz dieser dezentralen Speichern, als Partner der nachhaltigen Energieversorgung im ländlichen Raum. Die untersuchte Einspeisung von erneuerbarer Spitzenleistung lässt sich auch in die Entwicklungsländer übertragen, welche nicht über zentrale Kraftwerkskapazitäten und Verteilungsnetze verfügen.

Economics of Hybrid Photovoltaic Power Plants

The global power supply stability is faced to several severe and fundamental threats, in particular steadily increasing power demand, diminishing and degrading fossil and nuclear energy resources, very harmful greenhouse gas emissions, significant energy injustice and a structurally misbalanced ecological footprint. Photovoltaic (PV) power systems are analysed in various aspects focusing on economic and technical considerations of supplemental and substitutional power supply to the constraint conventional power system. To infer the most relevant system approach for PV power plants several solar resources available for PV systems are compared. By combining the different solar resources and respective economics, two major PV systems are identified to be very competitive in almost all regions in the world. The experience curve concept is used as a key technique for the development of scenario assumptions on economic projections for the decade of the 2010s. Main drivers for cost reductions in PV systems are learning and production growth rate, thus several relevant aspects are discussed such as research and development investments, technical PV market potential, different PV technologies and the energetic sustainability of PV. Three major market segments for PV systems are identified: off-grid PV solutions, decentralised small scale on-grid PV systems (several kWp) and large scale PV power plants (tens of MWp). Mainly by application of ‘grid-parity’ and ‘fuel-parity’ concepts per country, local market and conventional power plant basis, the global economic market potential for all major PV system segments is derived. PV power plant hybridization potential of all relevant power technologies and the global power plant structure are analyzed regarding technical, economical and geographical feasibility. Key success criteria for hybrid PV power plants are discussed and comprehensively analysed for all adequate power plant technologies, i.e. oil, gas and coal fired power plants, wind power, solar thermal power (STEG) and hydro power plants. For the 2010s, detailed global demand curves are derived for hybrid PV-Fossil power plants on a per power plant, per country and per fuel type basis. The fundamental technical and economic potentials for hybrid PV-STEG, hybrid PV-Wind and hybrid PV-Hydro power plants are considered. The global resource availability for PV and wind power plants is excellent, thus knowing the competitive or complementary characteristic of hybrid PV-Wind power plants on a local basis is identified as being of utmost relevance. The complementarity of hybrid PV-Wind power plants is confirmed. As a result of that almost no reduction of the global economic PV market potential need to be expected and more complex power system designs on basis of hybrid PV-Wind power plants are feasible. The final target of implementing renewable power technologies into the global power system is a nearly 100% renewable power supply. Besides balancing facilities, storage options are needed, in particular for seasonal power storage. Renewable power methane (RPM) offers respective options. A comprehensive global and local analysis is performed for analysing a hybrid PV-Wind-RPM combined cycle gas turbine power system. Such a power system design might be competitive and could offer solutions for nearly all current energy system constraints including the heating and transportation sector and even the chemical industry. Summing up, hybrid PV power plants become very attractive and PV power systems will very likely evolve together with wind power to the major and final source of energy for mankind.

Morbilidad laboral en el sector agrícola en trabajadores afiliados a una administradora de riesgos laborales (ARL) de Colombia, durante el periodo 2011-2012.

Este estudio muestra la prevalencia por enfermedad laboral de un grupo de trabajadores afiliados a una ARL en Colombia. Compara la morbilidad laboral entre dos grupo de trabajadores expuestos y no expuestos al trabajo agrícola y al interior del grupo de trabajadores agrícolas agrupados en las actividades de corte de caña, cultivo de banano y flores. Se realizó un estudio descriptivo de tipo transversal durante el periodo 2011-2012, mediante la revisión de una base de datos de morbilidad laboral. Se realizó un análisis uni-variado y Bi-variado y se comparó la morbilidad con datos sociodemográficos, grupos de trabajadores agrícolas y no agrícolas, y actividad productiva del sector agrícola. Se revisaron 3129 diagnósticos de enfermedad profesional durante el periodo de estudio, 433 diagnósticos fueron trabajadores agrícolas y 2696 pertenecieron a otros grupos de trabajadores. Los desórdenes Osteomusculares fueron los diagnósticos más prevalentes en el grupo Agro 92% y No Agro 86% y en las actividades de corte de caña, cultivo de banano y flores. Entre el grupo Agrícola y no agrícola se encontraron diferencias significativas en los siguientes diagnósticos: Síndrome del túnel del carpo, Síndrome de manguito rotador, Otras sinovitis y tenosinovitis, Lumbago no Especificado, Hipoacusia Neurosensorial Bilateral y epicondilitis lateral; de igual manera se encontraron diferencias entre las actividades de corte de caña y cultivo de banano y flores en los diagnósticos de: Epicondilitis, Sinovitis, Síndrome del túnel del Carpo y Trastorno lumbar. El factor de riesgo más prevalente en el grupo agrícola fue el Ergonómico con el 92.8% de los casos

El Outsourcing en la dinámica de sistemas hacia mercados extranjeros

Este trabajo recopila literatura académica relevante sobre estrategias de entrada y metodologías para la toma de decisión sobre la contratación de servicios de Outsourcing para el caso de empresas que planean expandirse hacia mercados extranjeros. La manera en que una empresa planifica su entrada a un mercado extranjero, y realiza la consideración y evaluación de información relevante y el diseño de la estrategia, determina el éxito o no de la misma. De otro lado, las metodologías consideradas se concentran en el nivel estratégico de la pirámide organizacional. Se parte de métodos simples para llegar a aquellos basados en la Teoría de Decisión Multicriterio, tanto individuales como híbridos. Finalmente, se presenta la Dinámica de Sistemas como herramienta valiosa en el proceso, por cuanto puede combinarse con métodos multicriterio.

Exposición laboral de agentes químicos carcinógenos presentes en las empresas afiliadas a una ARL en Colombia 2011-2014

Objetivo: Caracterizar los sectores económicos con mayor susceptibilidad de exposición a agentes químicos carcinógenos, categorizados en el grupo 1 por la Agencia Internacional para la Investigación del Cáncer IARC (formaldehído, polvo de madera, benceno y sílice cristalina) afiliadas a una Administradora de riesgos Laborales (ARL) en Colombia entre el periodo 2011 a 2014. Método: Estudio de tipo descriptivo retrospectivo con datos históricos obtenidos desde 2011 hasta 2014. De acuerdo con el número de mediciones que se realizó en cada área y cargo de las empresas objeto de estudio, se utilizó la medición basal para determinar el estado inicial y evaluar de manera concurrente la exposición de estos cuatro agentes químicos. Resultados: En total se obtuvieron 201 mediciones de higiene industrial para cuatro agentes químicos carcinógenos. Los resultados mostraron que índice de riesgo de la exposición a agentes químicos carcinógenos en diferentes empresas, se encuentra en algunos casos en niveles altos o críticos dado que superar los valores máximos permisibles definidos por la Conferencia Americana de Higienistas Industriales de Gobierno (ACGIH). Conclusión: Los trabajadores de diferentes empresas en Colombia están expuestas a diferentes tipos de concentraciones por agentes químicos cancerígenos. Las concentraciones ambientales obtenidas en el ambiente laboral en algunos casos excedieron las concentraciones máximas permitidas, por lo que se recomienda que las empresas e instituciones del país fortalezcan las medidas de prevención, vigilancia y control para minimizar los riegos a que pueden estar expuestos sus trabajadores.

Descripción de los casos de accidentes laborales ocurridos en una empresa manufacturera, 2010 al 2014

Introducción Debido a que los accidentes de origen ocupacional ocupan un lugar importante dentro de las causas de ausentismo, discapacidades y hasta las muertes se realizó la descripción de la accidentalidad, teniendo en cuenta factores como la severidad y tipo de lesión, el tipo de actividad laboral y re accidentalidad ocurrida en una empresa manufacturera en un periodo de 2010 al 2014. Objetivos Establecer la distribución de los accidentes laborales ocurridos en una empresa manufacturera en el periodo de 2010 al 2014 según edad, género, área laboral y tipo de lesión. Materiales y métodos Se realizó un estudio de corte transversal en donde se analizaron las características según los trabajadores y la empresa y se realizaron asociaciones para establecer cuáles eran los factores de riesgo para presentar re accidentalidad. Se tomó una empresa manufacturera del sector de producción de alimentos que cuenta con un total de 950 empleados, en riesgo de presentar accidentes laborales. Se seleccionaron 338 accidentes ocurridos en el periodo de 2010 y 2014.Se realizaron análisis de los accidentes según las variables de: género, área de trabajo y tipo de herida para determinar su distribución según dichos factores. Posteriormente se realizaron análisis bivariado por medio de asociaciones estadísticas usando el estadístico Chi cuadrado y pruebas no paramétricas o paramétricas según la distribución de normalidad de las variables cuantitativas. El programa que se usó para el análisis fue el de SPSS versión 22. Resultados El estudio identificó que la proporción de accidentes durante el periodo estudiado con respecto al número de trabajadores fue de 35,6% y de los 950 trabajadores el 28,8% presentaron accidentes que corresponde a los 274 trabajadores. La mediana de edad fue de 35 años y se presentó más frecuente en mujeres (55,6%). El área laboral en la que se presentaron mayor número de accidentes fue el área de manufactura (75,7%). La proporción de mujeres que presentaban mayor accidentes en el área de manufactura si representó una diferencia de 23,4% con respecto a la proporción de hombres que presentaron mayor accidentes en la misma área. Con respecto al tipo de lesión, se presentaron accidentes frecuentemente en miembros superiores y según el género, las mujeres presentaron 2,02% más accidentes en miembros superiores comparado con los hombres. Los análisis en cuanto a re accidentalidad determinaron que el 16,8% de los trabajadores presentaron más de un accidente y un trabajador presentó 5 accidentes en el periodo de tiempo estudiado en la empresa, la edad se relacionó significativamente con el hecho de presentar re accidentalidad.

Planeamento estratégico de sistemas de informação em empresa de construção

Os Sistemas de Informação têm influenciado a vida quotidiana a um ritmo inesperado e com mudanças significativas na setor da construção, cuja importância é crucial para a economia de qualquer país. Sendo Angola, um país de economia emergente, caracterizado por um mercado em expansão e reestruturação, onde as decisões de Sistema Informação ainda são tomadas de forma isolada, e cada vez mais investidores estão a atuar no país, impulsionando o crescimento, é imperioso para o sector a identificação e exploração de Sistemas de Informação flexíveis e adaptáveis para fazer face as forças competitivas do setor. Partindo desta envolvente a presente dissertação visa ressaltar o reconhecimento da importância do Planeamento Estratégico de Sistemas de Informação-PESI para as organizações atuais. Neste contexto realizou-se o estudo de PESI em torno de um caso concreto numa Pequena Media Empresa, Angolana, a Terponte,SA, cujo objectivo é fornecer a construtora um plano em termos de SI para futuro. Os dados foram recolhidos através da utilização dos métodos qualitativos e quantitativos, sendo os mais pertinentes a análise documental, observação direta, entrevistas, questionários aos órgãos da empresa em estudo e demais intuições. A análise dos dados demonstrou uma deficiente gestão da informação, bem como inexistência de integração aplicacional. A presente dissertação pretende contribuir para o avanço do conhecimento científico no domínio do Planeamento Estratégico dos Sistemas de Informação e para a resolução de problemas específicos nomeadamente nas empresas do setor da construção civil.

Living up to the value agenda: the empirical realities of through-life value creation in construction

Current research agendas are increasingly encouraging the construction industry to operate on the basis of 'added value'. Such debates echo the established concept of 'high value manufacturing' and associated trends towards servitization. Within construction, the so-called 'value agenda' draws heavily from the notion of integrated solutions. This is held to be especially appropriate in the context of PFI projects. Also relevant is the concept of service-led projects whereby the project rationale is driven by the client's objectives for delivering an enhanced service to its own customers. Such ideas are contextualized by a consideration of broader trends of privatization and outsourcing within and across the construction industry's client base. The current emphasis on integrated solutions reflects long-term trends within privatized client organizations towards the outsourcing of asset management capabilities. However, such trends are by no means uniform or consistent. An in-depth case study of three operating divisions within a major construction company illustrates that firms are unlikely to reorientate their business in response to the 'value agenda'. In the case of PFI, the tendency has been to establish specialist units for the purposes of winning work. Meanwhile, institutionally embedded operating routines within the rest of the business remain broadly unaffected.

Modelling the construction projects using plans of work

An overview of organization in the construction industry is identified from plans of work published in the UK. This provides a basis for identifying the essential steps through which any construction project must pass. It is shown that all construction projects pass through a set of stages of work, consisting of inception, feasibility, scheme design, detail design, contract formation, construction and commissioning. Although there may be changes to the sequence and importance of these stages, their identification helps in making judgements about organizational structure on construction projects.

Construction subcontracts: for what we are about to receive

This paper is from a study on specialist and trade contracting in the construction industry. The research was commissioned by CIRIA and undertaken by the University of Reading in conjunction with Sir Alexander Gibb & Partners Ltd. The purpose of the work was to provide guidance for effective and equitable practice in the management of projects where much of the work is executed, and possibly designed, by specialist and trade contractors (STCs). As part of this study, a preliminary investigation into the nature and origins of specialist contracting was undertaken, in conjunction with a survey of the problems confronting STCs. This paper presents that phase of the project.

Construction management contracts: law and practice

The context of construction management (CM) reveals that this method of procurement is as much a management philosophy as a contract structure. It is important to consider legal and contractual issues in this context. The interplay between management and law is complex and often misunderstood. Before considering specific issues, the use of contractual remedies in business agreements is discussed. In addition, the extent to which standardising a form of contract detracts or contributes to the success of projects is also considered. The dearth of judicial decisions, and the lack of a standard form, render it difficult to be specific about legal issues. Therefore, the main discussion of legal issues is centred around a recently completed research project which involved eliciting the views of a cross-section of experienced construction management clients, consultants and trade contractors. These interviews are used as the basis for highlighting some of the most important legal points to consider when setting up CM projects. The interviews revealed that the advantage of CM is the proximity of the client to the trade contractors and the disadvantage is that it depends on a high degree of professionalism and experience; qualities which are unfortunately difficult to find in the UK construction industry.

Construction contracts: law and management (3rd edition)

This book is aimed primarily at students for whom the study of building or civil engineering contracts forms part of a construction-based course. We have had in mind the syllabus requirements for first degrees in Building, Civil Engineering, Architecture, Quantity Surveying and Building Surveying, as well as those of postgraduate courses in Construction Management and Project Management. We have also assumed that such students will already have been introduced to the general principles of English law, especially those relating to contract and tort. As a result, while aspects of those subjects that are of particular relevance to construction are dealt with here, the reader must look elsewhere for the general legal background. In producing this third edition, we have again been greatly assisted by the many helpful comments made by reviewers and users of its predecessor. Nonetheless, our basic aim is identical to that which underpinned the first edition: to provide an explanation of the fundamental principles of construction contract law, rather than a clause-by-clause analysis of any particular standard-form contract. As a result, while we draw most frequently upon JCT 98 for our illustrations of particular points, this merely reflects the pre-eminent position occupied by that particular form of contract in the UK construction industry. We conclude by repeating our previous warning as to the dangers inherent in a little learning. Neither this book, nor the courses for which it is intended, seek to produce construction lawyers. The objective is rather to enable those who are not lawyers to resolve simple construction disputes before they become litigious, and to recognize when matters require professional legal advice. It should be the aim of every construction student to understand the legal framework sufficiently that they can instruct and brief specialist lawyers, and this book is designed to help them towards that understanding.