889 resultados para shape vs use
Resumo:
Mode of access: Internet.
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
In order to investigate the potential of magic angle spinning nuclear magnetic resonance (MAS NMR) in the elucidation of post-mortem metabolism in muscle biopsies, simultaneous H-1 and (31)p MAS NMR measurements were made continuously on postmortem (20 min to 24 h) muscle longissimus samples from rabbits. The animals had either been or not been given adrenaline (0.5 mg kg(-1) 4 h pre-slaughter) to deplete stores of muscle glycogen. The intracellular pH was calculated from H-1 spectra, and the post-mortem rate of formation of lactate was followed and quantified. Comparison of measurements made on muscle samples from rabbits treated with adrenaline with measurements made on muscle samples from untreated' rabbits revealed significant effects of adrenaline treatment on both pH (pH24 h = 6.42 vs. pH24 It = 5.60) and formation of lactate (16 mmol g(-1) vs. 65 mmol g(-1)). The P-31 NMR spectra were used to follow the rate of degradation of ATP and phosphocreatine. The present study clearly shows that MAS NMR has potential for the study of post-mortem energy metabolism.
Resumo:
This paper considers the problem of tissue classification in 3D MRI. More specifically, a new set of texture features, based on phase information, is used to perform the segmentation of the bones of the knee. The phase information provides a very good discrimination between the bone and the surrounding tissues, but is usually not used due to phase unwrapping problems. We present a method to extract textural information from the phase that does not require phase unwrapping. The textural information extracted from the magnitude and the phase can be combined to perform tissue classification, and used to initialise an active shape model, leading to a more precise segmentation.
Resumo:
Background: Few studies have examined the potential benefits of specialist nurse-led programs of care involving home and clinic-based follow-up to optimise the post-discharge management of chronic heart failure (CHF). Objective: To determine the effectiveness of a hybrid program of clinic plus home-based intervention (C+HBI) in reducing recurrent hospitalisation in CHF patients. Methods: CHF patients with evidence of left ventricular systolic dysfunction admitted to two hospitals in Northern England were assigned to a C+HBI lasting 6 months post-discharge (n=58) or to usual, post-discharge care (UC: n=48) via a cluster randomization protocol. The co-primary endpoints were death or unplanned readmission (event-free survival) and rate of recurrent, all-cause readmission within 6 months of hospital discharge. Results: During study follow-up, more UC patients had an unplanned readmission for any cause (44% vs. 22%: P=0.0191 OR 1.95 95% CI 1.10-3.48) whilst 7 (15%) versus 5 (9%) UC and C+HBI patients, respectively, died (P=NS). Overall, 15 (26%) C+HBI versus 21 (44%) UC patients experienced a primary endpoint. C+HBI was associated with a non-significant, 45% reduction in the risk of death or readmission when adjusting for potential confounders (RR 0.55, 95% CI 0.28-1.08: P=0.08). Overall, C+HBI patients accumulated significantly fewer unplanned readmissions (15 vs. 45: P
Resumo:
Aims: The primary objective was to describe the usage pattern of hormone therapy (HT) in a sample of urban Australian women in 2001 and to assess the characteristics of users vs. non-users. The second objective was to determine whether there had been any change in usage since the publication of the results of the combined oestrogen plus progestagen arm of the Women's Health Initiative (WHI) in 2002. Methods: A cohort of 374 postmenopausal women aged 50-80 years participated in this substudy of the LAW (Longitudinal Assessment of Ageing in Women) project: a 5-year multidisciplinary, observational study. Participants completed an annual medical assessment including details of the use of HT and the reasons for use, as well as demographic and psychosocial data. Results: In December 2001, 30.8% of the participants were using HT, whereas 55.4% were ever users. The management of vasomotor symptoms and mood disturbance were the primary reasons for use. Of those who had been using HT in December 2001 (24.4%) women ceased using HT in the 3 months following publication of the WHI results. The percentage of women using HT in December 2003 (13.9%) was less than half of that of December 2001. Conclusion: The rate of HT use and the reasons for use, in 2001 in Brisbane was similar to that of other Australian regions. Usage of HT decreased since the publication of the WHI results in 2002 which may reflect changing attitudes by patients and practitioners regarding HT.
Resumo:
Background. Given the public health burden of skin cancer in white populations, an increase in sun protective behavior is needed. In a highrisk community, we assessed long-term Sunscreen use among people who had participated in a randomized trial of daily Sunscreen application for prevention of skin cancer. Methods. In 1992, 1621 residents of the subtropical Australian township of Nambour were randomly allocated to either daily or discretionary sunscreen use until 1996. From 1997 to 2002, we monitored by questionnaires their ongoing sunscreen use. Results. People who had never or irregularly used sunscreen when in summer sun before the trial were more likely (P < 0.0001) to be sustaining regular application especially to their face (20% vs. 11%) and forearms (14% vs. 5%) if they had been allocated to daily, not discretionary, use of sunscreen for 5 years. Conclusions. Regular voluntary sunscreen use for skin cancer prevention can be sustained by sun-sensitive people in the long term. Habit formation appears to be an important goal for sun protection programs among those living, or on vacation, in sunny places. (c) 2005 Elsevier Inc. All rights reserved.
Resumo:
Objectives The aims of the study were to describe the prevalence and associations of mental health disorder (MHD) among a cohort of HIV-infected patients attending the Victorian HIV/AIDS Service between 1984 and 2000, and to examine whether antiretroviral therapy use or mortality was influenced by MHD (defined as a record of service provision by psychiatric services on the Victorian Psychiatric Case Register). It was hypothesized that HIV-positive individuals with MHD would have poorer treatment outcomes, reduced responses to highly active antiretroviral therapy (HAART) and increased mortality compared with those without MHD. Methods This is a retrospective cohort of 2981 individuals (73% of the Victorian population diagnosed with HIV infection) captured on an HIV database which was electronically matched with the public Victorian Psychiatric Case Register (VPCR) (accounting for 95% of public system psychiatry service provision). The prevalence, dates and recorded specifics of mental health disorders at the time of the electronic match on 1 June 2000 are described. The association with recorded MHD, gender, age, AIDS illness, HIV exposure category, duration and type of antiviral therapy, treatment era (prior to 1986, post-1987 and pre-HAART, and post-HAART) on hospitalization and mortality at 1 September 2001 was assessed. Results Five hundred and twenty-five individuals (17.6% of the Victorian HIV-positive population) were recorded with MHD, most frequently coded as attributable to substance dependence/abuse or affective disorder. MHD was diagnosed prior to HIV in 33% and, of those diagnosed after HIV, 93.8% were recorded more than 1 year after the HIV diagnosis. Schizophrenia was recorded in 6% of the population with MHD. Hospitalizations for both psychiatric and nonpsychiatric illness were more frequent in those with MHD (relative risk 5.4; 95% confidence interval 3.7, 8.2). The total number of antiretrovirals used (median 6.4 agents vs 5.5 agents) was greater in those with MHD. When adjusted for antiretroviral treatment era, HIV exposure category, CD4 cell count and antiretroviral therapy, survival was not affected by MHD. Conclusions MHD is frequent in this population with HIV infection and is associated with increased healthcare utilization but not with reduced survival.
Resumo:
This paper presents the creation of 3D statistical shape models of the knee bones and their use to embed information into a segmentation system for MRIs of the knee. We propose utilising the strong spatial relationship between the cartilages and the bones in the knee by embedding this information into the created models. This information can then be used to automate the initialisation of segmentation algorithms for the cartilages. The approach used to automatically generate the 3D statistical shape models of the bones is based on the point distribution model optimisation framework of Davies. Our implementation of this scheme uses a parameterized surface extraction algorithm, which is used as the basis for the optimisation scheme that automatically creates the 3D statistical shape models. The current approach is illustrated by generating 3D statistical shape models of the patella, tibia and femoral bones from a segmented database of the knee. The use of these models to embed spatial relationship information to aid in the automation of segmentation algorithms for the cartilages is then illustrated.
Resumo:
We employ two different methods, based on belief propagation and TAP,for decoding corrupted messages encoded by employing Sourlas's method, where the code word comprises products of K bits selected randomly from the original message. We show that the equations obtained by the two approaches are similar and provide the same solution as the one obtained by the replica approach in some cases K=2. However, we also show that for K>=3 and unbiased messages the iterative solution is sensitive to the initial conditions and is likely to provide erroneous solutions; and that it is generally beneficial to use Nishimori's temperature, especially in the case of biased messages.
Resumo:
The pattern of illumination on an undulating surface can be used to infer its 3-D form (shape-from-shading). But the recovery of shape would be invalid if the luminance changes actually arose from changes in reflectance. So how does vision distinguish variation in illumination from variation in reflectance to avoid illusory depth? When a corrugated surface is painted with an albedo texture, the variation in local mean luminance (LM) due to shading is accompanied by a similar modulation in local luminance amplitude (AM). This is not so for reflectance variation, nor for roughly textured surfaces. We used depth mapping and paired comparison methods to show that modulations of local luminance amplitude play a role in the interpretation of shape-from-shading. The shape-from-shading percept was enhanced when LM and AM co-varied (in-phase) and was disrupted when they were out of phase or (to a lesser degree) when AM was absent. The perceptual differences between cue types (in-phase vs out-of-phase) were enhanced when the two cues were present at different orientations within a single image. Our results suggest that when LM and AM co-vary (in-phase) this indicates that the source of variation is illumination (caused by undulations of the surface), rather than surface reflectance. Hence, the congruence of LM and AM is a cue that supports a shape-from-shading interpretation. © 2006 Elsevier Ltd. All rights reserved.
Resumo:
The pattern of illumination on an undulating surface can be used to infer its 3-D form (shape from shading). But the recovery of shape would be invalid if the shading actually arose from reflectance variation. When a corrugated surface is painted with an albedo texture, the variation in local mean luminance (LM) due to shading is accompanied by a similar modulation in texture amplitude (AM). This is not so for reflectance variation, nor for roughly textured surfaces. We used a haptic matching technique to show that modulations of texture amplitude play a role in the interpretation of shape from shading. Observers were shown plaid stimuli comprising LM and AM combined in-phase (LM+AM) on one oblique and in anti-phase (LM-AM) on the other. Stimuli were presented via a modified ReachIN workstation allowing the co-registration of visual and haptic stimuli. In the first experiment, observers were asked to adjust the phase of a haptic surface, which had the same orientation as the LM+AM combination, until its peak in depth aligned with the visually perceived peak. The resulting alignments were consistent with the use of a lighting-from-above prior. In the second experiment, observers were asked to adjust the amplitude of the haptic surface to match that of the visually perceived surface. Observers chose relatively large amplitude settings when the haptic surface was oriented and phase-aligned with the LM+AM cue. When the haptic surface was aligned with the LM-AM cue, amplitude settings were close to zero. Thus the LM/AM phase relation is a significant visual depth cue, and is used to discriminate between shading and reflectance variations. [Supported by the Engineering and Physical Sciences Research Council, EPSRC].
Resumo:
Ocular dimensions are widely recognised as key variants of refractive error. Previously, accurate depiction of eye shape in vivo was largely restricted by limitations in the imaging techniques available. This thesis describes unique applications of the recently introduced 3-dimensional magnetic resonance imaging (MRI) approach to evaluate human eye shape in a group of young adult subjects (n=76) with a range of ametropia (MSE= -19.76 to +4.38D). Specific MRI derived parameters of ocular shape are then correlated with measures of visual function. Key findings include the significant homogeneity of ocular volume in the anterior eye for a range of refractive errors, whilst significant volume changes occur in the posterior eye as a function of ametropia. Anterior vs. posterior eye differences have also been shown through evaluations of equivalent spherical radius; the posterior 25% cap of the eye was shown to be relatively steeper in myopes compared to emmetropes. Further analyses showed differences in retinal quadrant profiles; assessments of the maximum distance from the retinal surface to the presumed visual axes showed exaggerated growth of the temporal quadrant in myopic eyes. Comparisons of retinal contour values derived from transformation of peripheral refraction data were made with MRI; flatter retinal curvature values were noted when using the MRI technique. A distinctive feature of this work is the evaluation of the relationship between ocular structure and visual function. Multiple aspects of visual function were evaluated through several vehicles: multifocal electroretinogram testing, visual field sensitivity testing, and the use of psychophysical methods to determine ganglion cell density. The results show that many quadrantic structural and functional variations exist. In general, the data could not demonstrate a significant correlation between visual function and associated measures of ocular conformation either within or between myopic and emmetropic groups.
Resumo:
This work is undertaken in the attempt to understand the processes at work at the cutting edge of the twist drill. Extensive drill life testing performed by the University has reinforced a survey of previously published information. This work demonstrated that there are two specific aspects of drilling which have not previously been explained comprehensively. The first concerns the interrelating of process data between differing drilling situations, There is no method currently available which allows the cutting geometry of drilling to be defined numerically so that such comparisons, where made, are purely subjective. Section one examines this problem by taking as an example a 4.5mm drill suitable for use with aluminium. This drill is examined using a prototype solid modelling program to explore how the required numerical information may be generated. The second aspect is the analysis of drill stiffness. What aspects of drill stiffness provide the very great difference in performance between short flute length, medium flute length and long flute length drills? These differences exist between drills of identical point geometry and the practical superiority of short drills has been known to shop floor drilling operatives since drilling was first introduced. This problem has been dismissed repeatedly as over complicated but section two provides a first approximation and shows that at least for smaller drills of 4. 5mm the effects are highly significant. Once the cutting action of the twist drill is defined geometrically there is a huge body of machinability data that becomes applicable to the drilling process. Work remains to interpret the very high inclination angles of the drill cutting process in terms of cutting forces and tool wear but aspects of drill design may already be looked at in new ways with the prospect of a more analytical approach rather than the present mix of experience and trial and error. Other problems are specific to the twist drill, such as the behaviour of the chips in the flute. It is now possible to predict the initial direction of chip flow leaving the drill cutting edge. For the future the parameters of further chip behaviour may also be explored within this geometric model.