A redução de vogais no português: estudo de uma amostra do PE em comparação com o PB

This study aims to verify the reduction phenomenon and/or disappearance of vowels, especially unstressed vowels in PE compared to the PB, obtained by analysis of the recording of an oral reading sample of the Mar Português poem, by Fernando Pessoa, made by informants of the two variants. The noticeable difference in pronunciation of the informants, with any possibility of reaching up to no understanding of European pronunciation by Brazilian speakers motivated the development of an experiment that allowed us to compare the duration of vowels produced in the two variants. By isolating and measuring the vowels at Praat audio analysis program, this study was to confirm the reduction and, in extreme cases, the disappearance of unstressed vowels in PE, a phenomenon described in Mateus and D'Andrade (2000)

Construção da memória a partir dos lugares, instituições e documentos: um estudo do Centro de Documentação e Memória Pe. Antão Jorge do Santuário Nacional de Aparecida

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessment of antimicrobial activity of cinnamon (Cinnamomum zeylanicum) essential oil combined with EDTA and polyethylene glycol in yogurt

Essential oils (EOs) are technological options that may be employed in natural foods due to their antimicrobial activities. However, restrictions exist when high EOs concentrations are required which, in their turn, affect sensory qualities. Technological alternatives, such as combination of EOs with chelating and dispersing agents, have been proposed in the literature. Current research determined the antimicrobial activity of cinnamon EO against microbial spoilage in yogurt when added at the highest acceptable sensory EO concentration, alone or associated with ethylenediaminetetraacetic acid (EDTA) and/or polyethylene glycol. Cinnamon EO's chemical analysis was performed by gas chromatography-mass spectrometry (GC-MS). Sensory analysis was conducted to define the highest acceptable sensory concentration of cinnamon EO in yogurt, stipulated at 0.04% cinnamon EO. Antimicrobial activity in yogurt was then evaluated for aerobic mesophiles, psychrotrophilic microorganisms, yeasts and molds counts. Treatments comprised (1) control, (2) 0.04% EO, (3) 0.04% EO + 0.01% EDTA, (4) 0.04% EO + 0.02% polyethylene glycol; (5) 0.04% EO + 0.01% EDTA + 0.2% polyethylene glycol, in triplicates. Concentration 0.04% of cinnamon EO, alone or associated with EDTA and/or polyethylene glycol, failed to show any antimicrobial activity against aerobic mesophiles, yeasts and molds.

Effects of polyethylene film wrap on cooler shrink and the microbial status of beef carcasses

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controlling the formation of ionic-liquid-based aqueous biphasic systems by changing the hydrogen-bonding ability of polyethylene glycol end groups

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

PE and PS lipids synergistically enhance membrane poration by a peptide with anticancer properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do estresse oxidativo, estado nutricional e vitaminas lipossolúveis em crianças atendidas no ambulatório de puericultura. Recife (PE) Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Prevalência da síndrome metabólica em moradores adultos do Arquipélago de Fernando de Noronha (PE)-Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Prevalência da síndrome metabólica em moradores adultos do Arquipélago de Fernando de Noronha (PE)-Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Top spoilage losses in maize silage sealed with plastic films with different permeabilities to oxygen

The quality of plastic films used for horizontal silos is important to limit losses in the upper silage layer. The aim of this work was to study the effectiveness of different plastic films in reducing the top losses in maize silage. The following treatments were evaluated: (i) coextruded polyethylene/polyamide oxygen barrier film (OB), (ii) polyethylene film (PE), (iii) polyvinyl chloride film (PVC), and (iv) coextruded PE/polyvinyl alcohol film (PVOH). These treatments differed according to oxygen permeability with values of 75, 722, 982 and 289 cm(3) m(-2) per 24 hour respectively. OB and PVOH films had better temperature and fermentation profiles than the more permeable films. The OB film was effective in reducing the dry-matter (DM) losses during storage (82 g kg(-1)), and the PVOH film had an intermediate value of DM loss (101 g kg(-1)). PE and PVC films had higher losses (138 and 145 g kg(-1) respectively). Oxygen permeability of the films promoted a positive correlation with DM losses (P < 0.05; r2 = 0.945). The results indicate that O2 permeability through the plastic film is a crucial factor for maintaining silage quality in the upper layer of the silo when it is perfectly sealed.

Genetic diversity of the Brazilian Creole cattle Pe-duro assessed by microsatellites and mitochondrial DNA

The objective of this study was to describe the genetic diversity and structure of the largest Pe-duro population by assessing variation at ten autosomal microsatellite (STR) loci and mitochondrial DNA (mtDNA) sequences. The mean expected heterozygosity was 0.755, the mean observed heterozygosity was 0.600 and significant inbreeding coefficient (Fis) and deviations from the Hardy-Weinberg equilibrium in most of analyzed loci demonstrate the impact of inbreeding and homozygosis on this population. A more in-depth genetic analysis could be achieved by expanding the STR list. The analysis of mtDNA provided evidence of ancestral African taurine haplotypes in Pe-duro and excluded maternal Zebuine introgression. In this report, the main Pe-duro population is genetically portrayed by sampling approximately 40% of it. As this herd represents the core of the Pe-duro conservation program, these findings are of outstanding value for the management and preservation of this Brazilian 'native' cattle breed.

Production of Fructooligosaccharides by Aspergillus phoenicis Biofilm on Polyethylene as Inert Support

Aspergillus phoenicis biofilms on polyethylene as inert support were used to produce fructooligosaccharides (FOS) in media containing 25% (m/V) of sucrose as a carbon source. The maximum production of total FOS (122 mg/mL), with 68% of 1-kestose and 32% of nystose, was obtained in Khanna medium maintained at 30 degrees C for 48 h under orbital agitation (100 rpm). At high concentrations of sucrose (30%, m/V), the recovery of FOS was higher than that observed at a low concentration (5%, m/V). High levels of FOS (242 mg/mL) were also recovered when using the biofilm in sodium acetate buffer with high sucrose concentration (50%, m/V) for 10 h. When the dried biofilm was reused in a fresh culture medium, there was a recovery of approx. 13.7% of total FOS after 72 h of cultivation at 30 C, and 10% corresponded to 1-kestose. The biofilm morphology, analyzed by scanning electron microscope, revealed a noncompact mycelium structure, with unfilled spaces and channels present among the hyphae. The results obtained in this study show that A. phoenicis biofilms may find application for FOS production in a single-step fermentation process, which is cost-effective in terms of reusability, downstream processing and efficiency.

Effect of pulse repetition rate and number of pulses in the analysis of polypropylene and high density polyethylene by nanosecond infrared laser induced breakdown spectroscopy

Pulse repetition rates and the number of laser pulses are among the most important parameters that do affect the analysis of solid materials by laser induced breakdown spectroscopy, and the knowledge of their effects is of fundamental importance for suggesting analytical strategies when dealing with laser ablation processes of polymers. In this contribution, the influence of these parameters in the ablated mass and in the features of craters was evaluated in polypropylene and high density polyethylene plates containing pigment-based PbCrO4. Surface characterization and craters profile were carried out by perfilometry and scanning electron microscopy. Area, volume and profile of craters were obtained using Taylor Map software. A laser induced breakdown spectroscopy system consisted of a Q-Switched Nd:YAG laser (1064 nm, 5 ns) and an Echelle spectrometer equipped with ICCD detector were used. The evaluated operating conditions consisted of 10, 25 and 50 laser pulses at 1, 5 and 10 Hz, 250 mJ/pulse (85 J cm(-2)), 2 mu s delay time and 6 mu s integration time gate. Differences in the topographical features among craters of both polymers were observed. The decrease in the repetition rate resulted in irregular craters and formation of edges, especially in polypropylene sample. The differences in the topographical features and ablated masses were attributed to the influence of the degree of crystallinity, crystalline melting temperature and glass transition temperature in the ablation process of the high density polyethylene and polypropylene. It was also observed that the intensities of chromium and lead emission signals obtained at 10 Hz were two times higher than at 5 Hz by keeping the number of laser pulses constant. (C) 2011 Elsevier B. V. All rights reserved.

Laminated Tubular-channel Ferroelectret Systems from Low-density Polyethylene Films and from Fluoroethylene-propylene Copolymer Films - A Comparison

A template-based lamination technique for the manufacture of ferroelectrets from uniform electret films was recently reported. In the present work, this technique is used to prepare similar ferroelectret structures from low-density polyethylene (LDPE) films and from fluoro-ethylene-propylene (FEP) copolymer films. A comparative analysis of the pressure-, temperature-, and frequency-dependent piezoelectric properties has been performed on the two ferroelectret systems. It is observed that the FEP ferroelectrets exhibit better piezoelectric responses and are thermally more stable. The difference between the piezoelectric d(33) coefficients of the two ferroelectret systems is partially explained here by their different elastic moduli. The anti-resonance peaks of both structures have been investigated by means of dielectric resonance spectroscopy and electroacoustic sound-pressure measurements. A difference of more than 10 kHz is observed between the anti-resonance frequencies of the two ferroelectret systems.

Avaliação do processo de sedimentação recente na Bacia do Pina – Recife (PE) Brasil – por meio do uso da variação vertical de carbonato biodetrítico e susceptibilidade magnética

O sistema estuarino-lagunar da Bacia do Pina e Rio Capibaribe situa-se no Recife (PE) Brasil, formado pela confluência dos rios Capibaribe, Tejipió, Jiquiá, Jordão e Pina, de grande importância para a Região Metropolitana do Recife. A variação vertical da porcentagem de carbonato de cálcio (CaCO3) no ambiente e a susceptibilidade magnética são ferramentas utilizadas para identificar o processo sedimentar dominante durante a deposição em ambientes costeiros e marinhos, podendo ser de origem marinha ou continental. Foi recuperado um testemunho, com 109 cm, localizado no setor médio do sistema estuarino. Os valores de susceptibilidade foram obtidos com o medidor da marca Bartington MS 2C, descritos visualmente quanto a granulometria e estruturas sedimentares, sub-amostrados em intervalos de 2 cm para a %CaCO3. Os valores de susceptibilidade variaram de 1 a 24 SI, os valores de carbonato variaram de 1,56 a 41,17 %. De acordo com a descrição visual foi observado a presença de granocrescência ascendente entre areia fina a média, cascalho biodetríticos, fragmentos de CaCO3, camadas de lama com matéria orgânica, fragmentos plásticos em algumas profundidades e a presença de uma camada de cascalho terrígeno. Por ser um ambiente de transição continental/marinho, a variação da sedimentação possivelmente está associada ao regime pluviométrico, onde em períodos chuvosos o sedimento fino presente no ambiente é remobilizado, e no período seco a pouca vazão fluvial favorece a deposição de finos. No intervalo 14 – 16 cm foi observado a maior porcentagem de CaCO3 indicando influência marinha durante a sedimentação. Diversos pulsos de sedimentação predominantemente terrígena foram observados na coluna sedimentar, representados por picos mais altos de susceptibilidade magnética provavelmente associados à ciclicidade das cheias do rio Capibaribe. As variações verticais de carbonato e da susceptibilidade obtidas foram importantes na identificação da variabilidade de influência terrígena ou marinha durante o processo de sedimentação recente no estuário