Demonstration of nonlinear inverse synthesis transmission over transoceanic distances

Nonlinear Fourier transform (NFT) and eigenvalue communication with the use of nonlinear signal spectrum (both discrete and continuous), have been recently discussed as promising transmission methods to combat fiber nonlinearity impairments. In this paper, for the first time, we demonstrate the generation, detection and transmission performance over transoceanic distances of 10 Gbaud and nonlinear inverse synthesis (NIS) based signal (4 Gb/s line rate), in which the transmitted information is encoded directly onto the continuous part of the signal nonlinear spectrum. By applying effective digital signal processing techniques, a reach of 7344 km was achieved with a bit-error-rate (BER) (2.1×10-2) below the 20% FEC threshold. This represents an improvement by a factor of ~12 in data capacity x distance product compared with other previously demonstrated NFT-based systems, showing a significant advance in the active research area of NFT-based communication systems.

A new inverse DEA method for merging banks

This study suggests a novel application of Inverse Data Envelopment Analysis (InvDEA) in strategic decision making about mergers and acquisitions in banking. The conventional DEA assesses the efficiency of banks based on the information gathered about the quantities of inputs used to realize the observed level of outputs produced. The decision maker of a banking unit willing to merge/acquire another banking unit needs to decide about the inputs and/or outputs level if an efficiency target for the new banking unit is set. In this paper, a new InvDEA-based approach is developed to suggest the required level of the inputs and outputs for the merged bank to reach a predetermined efficiency target. This study illustrates the novelty of the proposed approach through the case of a bank considering merging with or acquiring one of its competitors to synergize and realize higher level of efficiency. A real data set of 42 banking units in Gulf Corporation Council countries is used to show the practicality of the proposed approach.

Inverse space-dependent force problems for the wave equation

The determination of the displacement and the space-dependent force acting on a vibrating structure from measured final or time-average displacement observation is thoroughly investigated. Several aspects related to the existence and uniqueness of a solution of the linear but ill-posed inverse force problems are highlighted. After that, in order to capture the solution a variational formulation is proposed and the gradient of the least-squares functional that is minimized is rigorously and explicitly derived. Numerical results obtained using the Landweber method and the conjugate gradient method are presented and discussed illustrating the convergence of the iterative procedures for exact input data. Furthermore, for noisy data the semi-convergence phenomenon appears, as expected, and stability is restored by stopping the iterations according to the discrepancy principle criterion once the residual becomes close to the amount of noise. The present investigation will be significant to researchers concerned with wave propagation and control of vibrating structures.

First experimental demonstration of nonlinear inverse synthesis transmission over transoceanic distances

We demonstrate for the first time, the transmission performance of 10Gbaud nonlinear inverse synthesis based signal over transoceanic distances, showing a significant improvement in data capacity x distance product (x12) compared with other NFT-based systems.

Serum α-tocopherol has a nonlinear inverse association with periodontitis among US adults

Previous experimental models suggest that vitamin E may ameliorate periodontitis. However, epidemiologic studies show inconsistent evidence in supporting this plausible association. We aimed to investigate the association between serum α-tocopherol (αT) and γ-tocopherol (γT) and periodontitis in a large cross-sectional US population. This study included 4708 participants in the 1999–2001 NHANES. Serum tocopherols were measured by HPLC and values were adjusted by total cholesterol (TC). Periodontal status was assessed by mean clinical attachment loss (CAL) and probing pocket depth (PPD). Total periodontitis (TPD) was defined as the sum of mild, moderate, and severe periodontitis. All measurements were performed by NHANES. Means ± SDs of serum αT:TC ratio from low to high quartiles were 4.0 ± 0.4, 4.8 ± 0.2, 5.7 ± 0.4, and 9.1 ± 2.7 μmol/mmol. In multivariate regression models, αT:TC quartiles were inversely associated with mean CAL (P-trend = 0.06), mean PPD (P-trend < 0.001), and TPD (P-trend < 0.001) overall. Adjusted mean differences (95% CIs) between the first and fourth quartile of αT:TC were 0.12 mm (0.03, 0.20; P-difference = 0.005) for mean CAL and 0.12 mm (0.06, 0.17; P < 0.001) for mean PPD, whereas corresponding OR for TPD was 1.65 (95% CI: 1.26, 2.16; P-difference = 0.001). In a dose-response analysis, a clear inverse association between αT:TC and mean CAL, mean PPD, and TPD was observed among participants with relatively low αT:TC. No differences were seen in participants with higher αT:TC ratios. Participants with γT:TC ratio in the interquartile range showed a significantly lower mean PPD than those in the highest quartile. A nonlinear inverse association was observed between serum αT and severity of periodontitis, which was restricted to adults with normal but relatively low αT status. These findings warrant further confirmation in longitudinal or intervention settings.

The existence of an inverse limit of inverse system of measure spaces - a purely measurable case

The existence of an inverse limit of an inverse system of (probability) measure spaces has been investigated since the very beginning of the birth of the modern probability theory. Results from Kolmogorov [10], Bochner [2], Choksi [5], Metivier [14], Bourbaki [3] among others have paved the way of the deep understanding of the problem under consideration. All the above results, however, call for some topological concepts, or at least ones which are closely related topological ones. In this paper we investigate purely measurable inverse systems of (probability) measure spaces, and give a sucient condition for the existence of a unique inverse limit. An example for the considered purely measurable inverse systems of (probability) measure spaces is also given.

Additive and multiplicative properties of scoring methods for preference aggregation

The paper reviews some additive and multiplicative properties of ranking procedures used for generalized tournaments with missing values and multiple comparisons. The methods analysed are the score, generalised row sum and least squares as well as fair bets and its variants. It is argued that generalised row sum should be applied not with a fixed parameter, but a variable one proportional to the number of known comparisons. It is shown that a natural additive property has strong links to independence of irrelevant matches, an axiom judged unfavourable when players have different opponents.

Isolement de protéines liant les phospholipides à partir de tissus et du sérum bovins : évidences pour l'implication dans le transport inverse du cholestérol

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Utilisation d’un modèle de co-culture cellulaire pour l’évaluation in vitro du transport inverse du cholestérol

De nouveaux modèles cellulaires in vitro par transfert de milieu et par coculture ont été mis au point afin d’évaluer la capacité des HDL à éliminer l’excès de cholestérol des tissus périphériques et de le transporter vers le foie afin d’être excrété par le foie, un processus nommé le transport inverse du cholestérol (TIC). Le système cellulaire par transfert in vitro où des macrophages J774 sont gorgés de LDL acétylées et marqués au 3H-cholestérol a été préalablement établi afin de mesurer par scintillation l’efflux de cholestérol marqué vers le milieu de culture contenant des accepteurs de cholestérol. Ce milieu conditionné est transféré sur des cellules HepG2 afin d’étudier l’influx du cholestérol marqué. Ce dernier nous permet d’observer un transport de cholestérol de 25 % hors des J774 et un transport de 39 000 cpm dans les HepG2 en utilisant un milieu contenant 2 % de sérums humains mis en commun. Une stimulation des cellules J774 par l’AMPc augmente l’efflux et l’influx d’environ 45 %. Des tests de preuve de concept ont été effectués sur le système cellulaire par co-culture qui utilise des chambres de Boyden où les J774 sont localisées au fond d’un puits et les HepG2 dans un insert, et où le milieu est partagé entre les deux types cellulaires. On a déterminé qu’une confluence densité de 60 000 cellules/cm2 sur un insert constitué d’une membrane de polyester avec des pores de 3,0 μm, sans autre revêtement, permet d’observer un influx spécifique au sérum d’environ 6 000 cpm associés aux cellules HepG2, où 50 % des comptes radioactifs sont dans les cellules et l’autre moitié présente à la surface cellulaire.

Isolement de protéines liant les phospholipides à partir de tissus et du sérum bovins : évidences pour l'implication dans le transport inverse du cholestérol

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Inverse Association Between Gluteofemoral Obesity and Risk of Barrett's Esophagus in a Pooled Analysis

BACKGROUND & AIMS: Gluteofemoral obesity (determined by measurement of subcutaneous fat in hip and thigh regions) could reduce risks of cardiovascular and diabetic disorders associated with abdominal obesity. We evaluated whether gluteofemoral obesity also reduces risk of Barrett's esophagus (BE), a premalignant lesion associated with abdominal obesity.

METHODS: We collected data from non-Hispanic white participants in 8 studies in the Barrett's and Esophageal Adenocarcinoma Consortium. We compared measures of hip circumference (as a proxy for gluteofemoral obesity) from cases of BE (n=1559) separately with 2 control groups: 2557 population-based controls and 2064 individuals with gastroesophageal reflux disease (GERD controls). Study-specific odds ratios (OR) and 95% confidence intervals (95% CI) were estimated using individual participant data and multivariable logistic regression and combined using random effects meta-analysis.

RESULTS: We found an inverse relationship between hip circumference and BE (OR per 5 cm increase, 0.88; 95% CI, 0.81-0.96), compared with population-based controls in a multivariable model that included waist circumference. This association was not observed in models that did not include waist circumference. Similar results were observed in analyses stratified by frequency of GERD symptoms. The inverse association with hip circumference was only statistically significant among men (vs population-based controls: OR, 0.85; 95% CI, 0.76-0.96 for men; OR, 0.93; 95% CI, 0.74-1.16 for women). For men, within each category of waist circumference, a larger hip circumference was associated with decreased risk of BE. Increasing waist circumference was associated with increased risk of BE in the mutually adjusted population-based and GERD control models.

CONCLUSIONS: Although abdominal obesity is associated with increased risk of BE, there is an inverse association between gluteofemoral obesity and BE, particularly among men.

VLSI design and implementation of 2-D Inverse Discrete Wavelet Transform

This paper proposes a JPEG-2000 compliant architecture capable of computing the 2 -D Inverse Discrete Wavelet Transform. The proposed architecture uses a single processor and a row-based schedule to minimize control and routing complexity and to ensure that processor utilization is kept at 100%. The design incorporates the handling of borders through the use of symmetric extension. The architecture has been implemented on the Xilinx Virtex2 FPGA.

Avoiding Overfitting in Inverse Modeling of Chloride Migration in Concrete

Inverse analysis for reactive transport of chlorides through concrete in the presence of electric field is presented. The model is solved using MATLAB’s built-in solvers “pdepe.m” and “ode15s.m”. The results from the model are compared with experimental measurements from accelerated migration test and a function representing the lack of fit is formed. This function is optimised with respect to varying amount of key parameters defining the model. Levenberg-Marquardt trust-region optimisation approach is employed. The paper presents a method by which the degree of inter-dependency between parameters and sensitivity (significance) of each parameter towards model predictions can be studied on models with or without clearly defined governing equations. Eigen value analysis of the Hessian matrix was employed to investigate and avoid over-parametrisation in inverse analysis. We investigated simultaneous fitting of parameters for diffusivity, chloride binding as defined by Freundlich isotherm (thermodynamic) and binding rate (kinetic parameter). Fitting of more than 2 parameters, simultaneously, demonstrates a high degree of parameter inter-dependency. This finding is significant as mathematical models for representing chloride transport rely on several parameters for each mode of transport (i.e., diffusivity, binding, etc.), which combined may lead to unreliable simultaneous estimation of parameters.

Least Squares Approach to Inverse Problems in Musculoskeletal Biomechanics

Inverse simulations of musculoskeletal models computes the internal forces such as muscle and joint reaction forces, which are hard to measure, using the more easily measured motion and external forces as input data. Because of the difficulties of measuring muscle forces and joint reactions, simulations are hard to validate. One way of reducing errors for the simulations is to ensure that the mathematical problem is well-posed. This paper presents a study of regularity aspects for an inverse simulation method, often called forward dynamics or dynamical optimization, that takes into account both measurement errors and muscle dynamics. The simulation method is explained in detail. Regularity is examined for a test problem around the optimum using the approximated quadratic problem. The results shows improved rank by including a regularization term in the objective that handles the mechanical over-determinancy. Using the 3-element Hill muscle model the chosen regularization term is the norm of the activation. To make the problem full-rank only the excitation bounds should be included in the constraints. However, this results in small negative values of the activation which indicates that muscles are pushing and not pulling. Despite this unrealistic behavior the error maybe small enough to be accepted for specific applications. These results is a starting point start for achieving better results of inverse musculoskeletal simulations from a numerical point of view.