On-line life history calendar and sensitive topics : A pilot study

The use of the life history calendar (LHC) or the event history calendar as tools for collecting retrospective data has received increasing attention in many fields of social science and medicine. However, little research has examined the use of this method with web-based surveys. In this study, we adapted this method to an on-line setting to collect information about young adults' life histories, sexual behaviors, and substance use. We hypothesized that the LHC method would help respondents to date sensitive and non-sensitive events more precisely than when using a conventional questionnaire. We conducted an experimental design study comparing university students' responses to an on-line LHC and a conventional on-line question list. A test-retest design in which the respondents completed the survey again two weeks later was also applied to test the precision and reliability of the participants' dating of events. The results showed that whereas the numbers of sensitive and non-sensitive events were generally similar for the two on-line questionnaires, the responses obtained with the LHC were more consistent across the two administrations. Analyses of the respondents' on-line behavior while completing the LHC confirmed that respondents used the LHC's graphic interface to correct and reedit previous answers, thus decreasing data errors. (C) 2015 Elsevier Ltd. All rights reserved.

Change points detection in crime-related time series: an on-line fuzzy approach based on a shape space representation

The extension of traditional data mining methods to time series has been effectively applied to a wide range of domains such as finance, econometrics, biology, security, and medicine. Many existing mining methods deal with the task of change points detection, but very few provide a flexible approach. Querying specific change points with linguistic variables is particularly useful in crime analysis, where intuitive, understandable, and appropriate detection of changes can significantly improve the allocation of resources for timely and concise operations. In this paper, we propose an on-line method for detecting and querying change points in crime-related time series with the use of a meaningful representation and a fuzzy inference system. Change points detection is based on a shape space representation, and linguistic terms describing geometric properties of the change points are used to express queries, offering the advantage of intuitiveness and flexibility. An empirical evaluation is first conducted on a crime data set to confirm the validity of the proposed method and then on a financial data set to test its general applicability. A comparison to a similar change-point detection algorithm and a sensitivity analysis are also conducted. Results show that the method is able to accurately detect change points at very low computational costs. More broadly, the detection of specific change points within time series of virtually any domain is made more intuitive and more understandable, even for experts not related to data mining.

On-line teaching and Copyright : Any Hopes for an EU Harmonized Playground?

Education never fails to be mentioned ¿ and, often, mentioned first ¿ as a public interest that justifies an exception to copyright. Educational purposes were already present in the first version of the Berne Convention of 18862 and have remained there (although in revised language) ever since. The WIPO Copyright Treaty of 19963 expressly referred to education in its Preamble, when ¿Recognizing the need to maintain a balance between the rights of authors andthe larger public interest, particularly education, research and access to information, as reflected in the Berne Convention¿ (emphasis added). And morerecently, the EU Directive on Copyright in the Information Society4 stressed its goal ¿to promote learning and culture by protecting works and other subjectmatter while permitting exceptions or limitations in the public interest for the purpose of education and teaching¿ (Recital 14, emphasis added).

Optimización y aproximación al problema de la regresión simbólica a través de Straight Line Programs (SLP's) y algoritmos genéticos : Entrenamiento genético de SLP's

El problema de la regresión simbólica consiste en el aprendizaje, a partir de un conjunto muestra de datos obtenidos experimentalmente, de una función desconocida. Los métodos evolutivos han demostrado su eficiencia en la resolución de instancias de dicho problema. En este proyecto se propone una nueva estrategia evolutiva, a través de algoritmos genéticos, basada en una nueva estructura de datos denominada Straight Line Program (SLP) y que representa en este caso expresiones simbólicas. A partir de un SLP universal, que depende de una serie de parámetros cuya especialización proporciona SLP's concretos del espacio de búsqueda, la estrategia trata de encontrar los parámetros óptimos para que el SLP universal represente la función que mejor se aproxime al conjunto de puntos muestra. De manera conceptual, este proyecto consiste en un entrenamiento genético del SLP universal, utilizando los puntos muestra como conjunto de entrenamiento, para resolver el problema de la regresión simbólica.

Power line communication in motor cables of variable-speed electric drives − analysis and

Data transmission between an electric motor and a frequency converter is required in variablespeed electric drives because of sensors installed at the motor. Sensor information can be used for various useful applications to improve the system reliability and its properties. Traditionally, the communication medium is implemented by an additional cabling. However, the costs of the traditional method may be an obstacle to the wider application of data transmission between a motor and a frequency converter. In any case, a power cable is always installed between a motor and a frequency converter for power supply, and hence it may be applied as a communication medium for sensor level data. This thesis considers power line communication (PLC) in inverter-fed motor power cables. The motor cable is studied as a communication channel in the frequency band of 100 kHz−30 MHz. The communication channel and noise characteristics are described. All the individual components included in a variable-speed electric drive are presented in detail. A channel model is developed, and it is verified by measurements. A theoretical channel information capacity analysis is carried out to estimate the opportunities of a communication medium. Suitable communication and forward error correction (FEC) methods are suggested. A general method to implement a broadband and Ethernet-based communication medium between a motor and a frequency converter is proposed. A coupling interface is also developed that allows to install the communication device safely to a three-phase inverter-fed motor power cable. Practical tests are carried out, and the results are analyzed. Possible applications for the proposed method are presented. A speed feedback motor control application is verified in detail by simulations and laboratory tests because of restrictions for the delay in the feedback loop caused by PLC. Other possible applications are discussed at a more general level.

La gestión de la reputación on-line por parte de las compañías hoteleras : El papel del community manager

Mi trabajo de disertación se desarrolla en el contexto del Grado de Comunicación de la UOC y la finalidad es establecer un marco teórico actualizado sobre el concepto de reputación on-line aplicable al sector hotelero. En este sentido entiendo necesario partir del análisis de tres hoteles de Palma de Mallorca para obtener un diagnóstico de reputación y poderafirmar que existe una relación entre su reputación on-line y la obtención de mayores ingresos. Por este motivo, llevaré a cabo un estudio de caso comparativo con la herramienta de monitorización SocialVane del Hotel Gran Meliá Victoria con sus competidores más directos.

Automated flow-injection method for cadmium determination with pre-concentration and reagent preparation on-line

The spectrophotometric determination of Cd(II) using a flow injection system provided with a solid-phase reactor for cadmium preconcentration and on-line reagent preparation, is described. It is based on the formation of a dithizone-Cd complex in basic medium. The calibration curve is linear between 6 and 300 µg L-1 Cd(II), with a detection limit of 5.4 µg L-1, an RSD of 3.7% (10 replicates in duplicate) and a sample frequency of 11.4 h-1. The proposed method was satisfactorily applied to the determination of Cd(II) in surface, well and drinking waters.

Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.

Microwave Slot Transmission Line Filled with Ferroelectric and Ferromagnetic Layers

Now when the technology is fast developing it is very important to investigate new hybrid structures. One way is to use ferrite ferroelectric layered structures. Theoretical and experimental investigation of such structures was made. These structures have advantages of both layers and it is possible to tune the behavior of this structure by external electric and magnetic field. But these structures have some disadvantages connected with presence of thick ferroelectric layer. One way to overcome this problem is to use slotline. So this is another new way to create hybrid ferrite ferroelectric structures, but it is needed to create new theory and find experimental proof that the behavior of these structures can be tuned with external magnetic and electric fields.

Disseny i elaboració d'un gimnàs on-line

L’evolució que ha experimentat la societat, les grans ciutats, la industrialització i molts altres factors han modificat l’estil de vida de les persones accentuant-ne, irremediablement, el sedentarisme i l’abstinència de realitzar exercici físic. La pràctica esportiva i/o d’exercici físic realitzada sota les condicions recomanades pels professionals, és beneficiosa per millorar el nivell de salut o mantenir-lo en tot el possible, ja que provoca modificacions beneficioses sobre el metabolisme, el sistema cardiovascular i l’aparell locomotor. Lamentablement, l’hàbit de realitzar exercici físic no és comú en totes les persones, ja sigui per l’estil de vida que genera incompatibilitats d’horaris amb la feina, fills i familiars o bé per mandra o desgana d’haver d’aprofitar aquelles estones de temps lliure per dedicar-los al culte del cos i de la salut. Els efectes negatius que suposa una modalitat de vida sedentària per a la salut són notablement elevats, amb la qual cosa, cal buscar sistemes per augmentar l’ interès de la població per la pràctica de l’esport i l’activitat física. La creació d’aquest projecte neix de la idea d’unir el fet d’enginyar un mètode per incrementar l’interès de les persones per l’exercici físic amb els avenços tecnològics que s’han realitzat aquesta última dècada relacionats amb el desenvolupament web i multimèdia. A grans trets, la idea general d’aquest projecte es basa en el cas d’un gimnàs real i en actiu, amb necessitat de crear un portal web que serveixi alhora de pàgina web informativa i d’eina de gestió acadèmica del centre proporcionant certes funcionalitats als clients tot presentant-los una nova modalitat de realitzar exercici físic dirigit: realitzar-lo des de casa. Per desenvolupar tot el sistema informàtic que ho durà a terme, després de realitzar una recerca, anàlisi i elecció de les eines mitjançant les quals poder-ho realitzar, s’ha optat per crear l’entorn web mitjançant els llenguatges HTML i PHP en combinació amb els fulls d’estil CSS. Pel que fa a l’entorn de desenvolupament, s’ha utilitzat Notepad++ i com a entorn de proves, WAMP Server. Per últim, pel que fa a la transmissió del contingut multimèdia (vídeos de les sessions d’activitats) s’ha utilitzat Flash Media Interactive Server en combinació de Flash Media Live Encoder per codificar-ne el contingut. L’usuari final, des de qualsevol punt del planeta, podrà realitzar (sempre i quan disposi del temps i el material necessari i una connexió a Internet) en temps real i en directe les classes dirigides que es realitzen al centre. Tanmateix, també s’ha desenvolupat una botiga virtual on qualsevol persona podrà comprar-hi, entre d’altres coses relacionades amb la pràctica de l’exercici físic, tot el material necessari per realitzar qualsevol de les activitats que s’imparteixen al gimnàs i ho rebrà còmodament a casa. Aprofitar unes circumstàncies econòmiques adverses per generar una nova manera de captar clients proporcionant-los una alternativa econòmica, diferent, nova i original d’anar al gimnàs. Temps de crisis, temps d’oportunitats. Aquesta és la moralitat que pretén donar aquest projecte.

Desenvolupament d'una aplicació per a la creació de pressupostos on-line

En aquests moments, el mercat no es troba en una bona situació, per aquest motiu les empreses han de buscar noves maneres de créixer, expandir-se i noves formes d’interactuar amb els clients. La idea original d’aquest projecte sorgeix de la necessitat de disposar d’una manera diferent de promocionar-se i oferir nous serveis a través d’internet mitjançant una pàgina web. Degut a la situació actual, el preu és un aspecte molt important i influent a l’hora de realitzar una obra. Per aquest motiu es va pensar que seria molt interessant que el client pogués demanar de forma fàcil i ràpida un pressupost, i a l’instant tingués un preu orientatiu del que li pot costar la obra. D’aquesta manera l’interessat s’estalvia i agilitza molts passos previs abans de començar una obra. Després d’analitzar quina era la millor manera de portar a terme el projecte informàtic, s’ha determinat que la pàgina web es desenvoluparà utilitzant els llenguatges HTML i PHP combinant-lo amb el framework CodeIgniter. El disseny de la web es realitzarà mitjançant fulles d’estil CSS conjuntament amb el framework BootStrap. Per realitzar l’aplicació web que realitza els pressupostos s’utilitzarà AJAX i jQuery perquè d’aquesta manera el procés sigui dinàmic. L’entorn de desenvolupament escollit és el NetBeans i per provar el projecte s’utilitza el XAMPP. Un usuari només necessitarà un navegador i connexió a internet per fer servir totes les funcions de la web. Podrà realitzar pressupostos, concertar visites, contactar i per suposat veure tota la part informativa de la pàgina

Enhancing Customer Knowledge and Its Sharing At a Paper Production Line

This study has been made for specific paper production line at an international forest industry company in Finland. The main purpose for the study was a need to examine the current situation of the customer knowledge and its’ sharing at case production line, recognize the problems in it and finally, find out the improvement actions. The study is composed of theoretical and empirical parts. In theoretical part, knowledge management and information sharing in addition to customer knowledge management are presented. Empirical data from case production line was collected by using survey questionnaires. The results are analyzed in discussion and conclusions and finally, study ends with summary which includes recommendations. Based on the study, the amount and quality of customer knowledge and gaining and transferring the customer knowledge were found as the main challenges. The proposed solutions were discovered from moving towards more dynamic operating environment and in the area of customer knowledge management, especially from the communities of creation.

Determination of etoricoxib in human plasma using automated on-line solid-phase extraction coupled with LC-APCI/MS/MS

A liquid chromatography-tandem mass spectrometry method with atmospheric pressure chemical ionization (LC-APCI/MS/MS) was validated for the determination of etoricoxib in human plasma using antipyrin as internal standard, followed by on-line solid-phase extraction. The method was performed on a Luna C18 column and the mobile phase consisted of acetonitrile:water (95:5, v/v)/ammonium acetate (pH 4.0; 10 mM), run at a flow rate of 0.6 mL/min. The method was linear in the range of 1-5000 ng/mL (r²>0.99). The lower limit of quantitation was 1 ng/mL. The recoveries were within 93.72-96.18%. Moreover, method validation demonstrated acceptable results for the precision, accuracy and stability studies.