Optimizing the performance of catalytic traps for hydrocarbon abatement during the cold-start of a gasoline engine

A key target to reduce current hydrocarbon emissions from vehicular exhaust is to improve their abatement under cold-start conditions. Herein, we demonstrate the potential of factorial analysis to design a highly efficient catalytic trap. The impact of the synthesis conditions on the preparation of copper-loaded ZSM-5 is clearly revealed by XRD, N2 sorption, FTIR, NH3-TPD, SEM and TEM. A high concentration of copper nitrate precursor in the synthesis improves the removal of hydrocarbons, providing both strong adsorption sites for hydrocarbon retention at low temperature and copper oxide nanoparticles for full hydrocarbon catalytic combustion at high temperature. The use of copper acetate precursor leads to a more homogeneous dispersion of copper oxide nanoparticles also providing enough catalytic sites for the total oxidation of hydrocarbons released from the adsorption sites, although lower copper loadings are achieved. Thus, synthesis conditions leading to high copper loadings jointly with highly dispersed copper oxide nanoparticles would result in an exceptional catalytic trap able to reach superior hydrocarbon abatement under highly demanding operational conditions.

The “dehesa”, a key ecosystem in maintaining the diversity of Mediterranean saproxylic insects (Coleoptera and Diptera: Syrphidae)

The “dehesa” is a traditional Iberian agrosilvopastoral ecosystem characterized by the presence of old scattered trees that are considered as “keystone-structures”, which favor the presence of a wide range of biodiversity. We show the high diversity of saproxylic beetles and syrphids (Diptera) in this ecosystem, including red-listed species. We analyzed whether saproxylic species distribution in the “dehesa” was affected by tree density per hectare, dominant tree species or vegetation coverage. Species diversity did not correlate with tree density; however, it was affected by tree species and shrub coverage but in a different way for each taxon. The highest beetle diversity was linked to Quercus pyrenaica, the most managed tree species, with eight indicator species. In contrast, Q. rotundifolia hosted more species of saproxylic syrphids. Regarding vegetation coverage, shrub coverage was the only variable that affected insect richness, again in a different way for both taxa. In contrast, beetle species composition was only affected by dominant tree species whereas syrphid species composition was not affected by tree species or shrub coverage. We concluded that the high diversity of saproxylic insects in the “dehesa” is related to its long history of agrosilvopastoral management, which has generated landscape heterogeneity and preserved old mature trees. However, the richness and composition of different taxa of insects respond in different ways to tree species and vegetation coverage. Consequently, conservation strategies should try to maintain traditional management, and different saproxylic taxa should be used to monitor the effect of management on saproxylic diversity.

Quality certification, performance and size in hotel chains

This paper examines the relationship between quality certification and performance, and quality certification and size in hotel chains operating in Spain. In an initial phase, a quantitative study is made with secondary and objective data to analyse these relationships. In a second phase, a qualitative analysis is applied to reach a better understanding of the quantitative results. The findings show that chains with certified hotels achieve better performance levels; that better performance levels increase with the percentage of certified hotels within the chain; and that quality certification has positive effects on some performance variables. In addition, size is not a key factor for certification, although it could be an enabler.

Investigation of Performance Enhancements for a Liquid-Desiccant Solar Air-Conditioner

Thermally driven liquid-desiccant air-conditioners (LDAC) are a proven but still developing technology. LDACs can use a solar thermal system to reduce the operational cost and environmental impact of the system by reducing the amount of fuel (e.g. natural gas, propane, etc.) used to drive the system. LDACs also have a key benefit of being able to store energy in the form of concentrated desiccant storage. TRNSYS simulations were used to evaluate several different methods of improving the thermal and electrical coefficients of performance (COPt and COPe) and the solar fraction (SF) of a LDAC. The study analyzed a typical June to August cooling season in Toronto, Ontario. Utilizing properly sized, high-efficiency pumps increased the COPe to 3.67, an improvement of 55%. A new design, featuring a heat recovery ventilator on the scavenging-airstream and an energy recovery ventilator on the process-airstream, increased the COPt to 0.58, an improvement of 32%. This also improved the SF slightly to 54%, an increase of 8%. A new TRNSYS TYPE was created to model a stratified desiccant storage tank. Different volumes of desiccant were tested with a range of solar array system sizes. The largest storage tank coupled with the largest solar thermal array showed improvements of 64% in SF, increasing the value to 82%. The COPe was also improved by 17% and the COPt by 9%. When combining the heat recovery systems and the desiccant storage systems, the simulation results showed a 78% increase in COPe and 30% increase in COPt. A 77% improvement in SF and a 17% increase in total cooling rate were also predicted by the simulation. The total thermal energy consumed was 10% lower and the electrical consumption was 34% lower. The amount of non-renewable energy needed from the natural gas boiler was 77% lower. Comparisons were also made between LDACs and vapour-compression (VC) systems. Dependent on set-up, LDACs provided higher latent cooling rates and reduced electrical power consumption. Negatively, a thermal input was required for the LDAC systems but not for the VC systems.

Performance Indicators in Agricultural Financial Markets. Factor Markets Working Document No. 43, May 2013

This study attempts to develop performance indicators for the financial markets based on the findings in an earlier Factor Markets Working Paper (No. 33, “Agricultural credit market institutions: A comparison of selected European countries”) and on FADN (Farm Accountancy Data Network) data. Two indicators were developed. One measured the long-term economic sustainability of agricultural firms since the financial characteristics of the firms were perceived as important factors when rejecting a loan applicant. If the indicator works, it should show that a low value in this indicator is related to the performance in the financial markets. The second indicator was the loan-to-value (LTV), or debt-to-asset ratio, the reasoning behind this indicator is that low values can point to credit constraints, and in WP 33 we saw that the interviewed experts expected LTVs to be much higher than what is actually the case. We find that the first indicator can’t be used to measure the performance of the financial institutions, since we can’t show any relationship between the indicator and activities in the financial markets. However, the indicator is valuable for its measurement of the long-term financial sustainability of the agricultural sector, or of the firms. The loan-to-value indicator does imply that most countries would have room to increase the credit.

Household Final Consumption in the EU: The key driver for a sustainable recovery? ECRI Commentary No. 18, 4 December 2015

This commentary finds that after four to five years of poor performance, final consumption of households is expected to recover significantly in 2015 and 2016. This is all the more important since final consumption of households was the main driver of economic growth during the 12 years preceding the financial crisis. Some obstacles still stand in the way, however, preventing a sustainable recovery in private consumption.

TIC em hospitais privados: estudo do uso, do custo e da integração

A tese estuda e analisa as Tecnologias da Informação e Comunicação (TIC) disponíveis em hospitais no Brasil, associados à ANAHP – Associação Nacional de Hospitais Privados que patrocinou a coleta de dados e apoiou a pesquisa com dois temas centrais: uso e custo; integração e interoperabilidade das TIC. A Organização para a Cooperação e Desenvolvimento Econômico (OECD), em estudo sobre TIC em saúde, afirmou que, se implantadas de maneira eficiente, as TIC podem resultar em melhoria da qualidade na prestação de serviços de saúde, aumento da segurança no atendimento ao paciente e custos menores. Para permitir a comparação de resultados e o uso de modelos de pesquisa confiáveis, este estudo adaptou o Modelo de Pesquisa de Uso de TI utilizado pelo GVcia - Centro de Tecnologia da Informação Aplicada da FGV – EAESP e realizou uma complementação dos instrumentos de pesquisa para levantar dados específicos da integração das TIC em hospitais utilizando com referência uma pesquisa aplicada a hospitais norte-americanos. A coleta de dados foi realizada para o período 2009 a 2015 em duas etapas. Na primeira, foi enviado o questionário eletrônico, validado por executivos de hospitais e apresentado no apêndice A. Na segunda etapa, os dados enviados foram validados e aspectos da integração foram esclarecidos por meio de entrevistas. O estudo de custo e uso das TIC resultou no cálculo de diversos indicadores. Gastos e investimentos com TIC em hospitais privados atingiu a 3,5% do faturamento anual dos hospitais da amostra enquanto que o setor da saúde, por sua vez, gastou e investiu 6,4% do faturamento anual com as TIC que implementou. Outro indicador inédito e importante para futuros estudos no setor é o custo anual das TIC por leito hospitalar que permaneceu estável em torno de US$ 39.000 entre 2010 e 2014 e caiu para US$ 36.000 em 2015, valor equivalente a R$ 120.000 de dezembro de 2015. Outras estatísticas e indicadores apresentados no estudo ajudam a entender a evolução e o desempenho das TIC na prestação de serviços de saúde e poderão ser úteis para decidir se as TIC ajudarão a melhorar a segurança e atenção ao paciente, aos profissionais de saúde no acesso a dados do paciente, e a necessária sintonia com o Modelo da Saúde Digital (e-Saúde), a custos adequados. Os resultados do presente estudo são comparáveis aos americanos semelhantes e permitem inferir que o parque tecnológico em uso nos hospitais privados brasileiros poderá alavancar a integração de sistemas existentes, permitindo a sintonia com Modelos de Saúde Digital, com a melhoria de desempenho da cadeia estendida da saúde na atenção ao cidadão que poderá ser assistido onde estiver, a qualquer momento, com segurança. Ação gerencial e investimentos são os tópicos centrais que envolvem a integração.

Being young in a changing world: how temperature and salinity changes interactively modify the performance of larval stages of the barnacle Amphibalanus improvisus

The fate of key species, such as the barnacle Amphibalanus improvisus, in the course of global change is of particular interest since any change in their abundance and/or performance may entail community-wide effects. In the fluctuating Western Baltic, species typically experience a broad range of environmental conditions, which may preselect them to better cope with climate change. In this study, we examined the sensitivity of two crucial ontogenetic phases (naupliar, cypris) of the barnacle toward a range of temperature (12, 20, and 28°C) and salinity (5, 15, and 30 psu) combinations. Under all salinity treatments, nauplii developed faster at intermediate and high temperatures. Cyprid metamorphosis success, in contrast, was interactively impacted by temperature and salinity. Survival of nauplii decreased with increasing salinity under all temperature treatments. Highest settlement rates occurred at the intermediate temperature and salinity combination, i.e., 20°C and 15 psu. Settlement success of "naive" cyprids, i.e., when nauplii were raised in the absence of stress (20°C/15 psu), was less impacted by stressful temperature/salinity combinations than that of cyprids with a stress history. Here, settlement success was highest at 30 psu particularly at low and high temperatures. Surprisingly, larval survival was not highest under the conditions typical for the Kiel Fjord at the season of peak settlement (20°C/15 psu). The proportion of nauplii that ultimately transformed to attached juveniles was, however, highest under these "home" conditions. Overall, only particularly stressful combinations of temperature and salinity substantially reduced larval performance and development. Given more time for adaptation, the relatively smooth climate shifts predicted will probably not dramatically affect this species.

Spatial distribution of key zooplankton species using continuous plankton recorder (CPR) data from the North Atlantic (2000-2009)

The continuous plankton recorder (CPR) survey is an upper layer plankton monitoring program that has regularly collected samples, at monthly intervals, in the North Atlantic and adjacent seas since 1946. Water from approximately 6 m depth enters the CPR through a small aperture at the front of the sampler and travels down a tunnel where it passes through a silk filtering mesh of 270 µm before exiting at the back of the CPR. The plankton filtered on the silk is analyzed in sections corresponding to 10 nautical miles (approx. 3 m**3 of seawater filtered) and the plankton microscopically identified (Richardson et al., 2006 and reference therein). In the present study we used the CPR data to investigate the current basin scale distribution of C. finmarchicus (C5-C6), C. helgolandicus (C5-C6), C. hyperboreus (C5-C6), Pseudocalanus spp. (C6), Oithona spp. (C1-C6), total Euphausiida, total Thecosomata and the presence/absence of Cnidaria and the Phytoplankton Colour Index (PCI). The PCI, which is a visual assessment of the greenness of the silk, is used as an indicator of the distribution of total phytoplankton biomass across the Atlantic basin (Batten et al., 2003). Monthly data collected between 2000 and 2009 were gridded using the inverse-distance interpolation method, in which the interpolated values were the nodes of a 2 degree by 2 degree grid. The resulting twelve monthly matrices were then averaged within the year and in the case of the zooplankton the data were log-transformed (i.e. log10 (x+1).

Alienation Effects : Performance and Self-Management in Yugoslavia, 1945-89 /

Jakovljevic considers the concept of theatricality as central to understanding the events that took place in Yugoslavia. He examines the country’s trials, state ceremonies and festivals, army maneuvers, propaganda, and pop culture as “rehearsals and temporary enactments of an ideologically formulated future.”.

Does industry matter? Examining the role of industry structure and organizational learning in innovation and brand performance

A manager's perception of industry structure (dynamism) has the potential to impact various organizational strategies and behaviors. This may be particularly so with regard to perceptions driving organizational learning orientations and innovation based marketing strategy. The position taken here suggests that firms operating within a competitive industry tend to pursue innovative ways of performing value-creating activities, which requires the development of learning capabilities. The results of a study of SMEs suggest that market focused learning, relative to other learning capabilities plays a key role in the relationships between industry structure, innovation and brand performance. The findings also show that market focused learning and internally focused learning influence innovation and that innovation influences a brand's performance. (c) 2005 Elsevier Inc. All rights reserved.

Process, performance, and pollution potential: A review of septic tank-soil absorption systems

On-site wastewater treatment and dispersal systems (OWTS) are used in non-sewered populated areas in Australia to treat and dispose of household wastewater. The most common OWTS in Australia is the septic tank-soil absorption system (SAS) - which relies on the soil to treat and disperse effluent. The mechanisms governing purification and hydraulic performance of a SAS are complex and have been shown to be highly influenced by the biological zone (biomat) which develops on the soil surface within the trench or bed. Studies suggest that removal mechanisms in the biomat zone, primarily adsorption and filtering, are important processes in the overall purification abilities of a SAS. There is growing concern that poorly functioning OWTS are impacting upon the environment, although to date, only a few investigations have been able to demonstrate pollution of waterways by on-site systems. In this paper we review some key hydrological and biogeochemical mechanisms in SAS, and the processes leading to hydraulic failure. The nutrient and pathogen removal efficiencies in soil absorption systems are also reviewed, and a critical discussion of the evidence of failure and environmental and public health impacts arising from SAS operation is presented. Future research areas identified from the review include the interactions between hydraulic and treatment mechanisms, and the biomat and sub-biomat zone gas composition and its role in effluent treatment.

Moving and dancing towards decolonisation in education: An example from an Indigenous Australian performance classroom

This paper explores the special type of thinking, moving and dancing place which is opened up for decolonisaton when students engage in an embodied pedagogical practice in Indigenous education. The author examines what decolonisation means in this context by describing the ways in which the curriculum, the students and teacher, and more generally the discipline of ethnomusicology itself, undergo a process to question, critique, and move aside the pedagogical script of colonialism in order to allow Indigenous ways of understanding music and dance to be presented, privileged and empowered. Key questions are: What is the relationship between embodiment and disembodiment and decolonisation and colonisation? In what ways is embodiment more than, or other than, the presence of moving bodies? In what ways is performativity an aspect of power/knowledge/subject formations? How can it be theorised? What could the pedagogical scripts of decolonisation look like?

Recommendations and guidelines for the performance of accurate heat transfer measurements in rapid forming processes

The published requirements for accurate measurement of heat transfer at the interface between two bodies have been reviewed. A strategy for reliable measurement has been established, based on the depth of the temperature sensors in the medium, on the inverse method parameters and on the time response of the sensors. Sources of both deterministic and stochastic errors have been investigated and a method to evaluate them has been proposed, with the help of a normalisation technique. The key normalisation variables are the duration of the heat input and the maximum heat flux density. An example of application of this technique in the field of high pressure die casting is demonstrated. The normalisation study, coupled with previous determination of the heat input duration, makes it possible to determine the optimum location for the sensors, along with an acceptable sampling rate and the thermocouples critical response-time (as well as eventual filter characteristics). Results from the gauge are used to assess the suitability of the initial design choices. In particular the unavoidable response time of the thermocouples is estimated by comparison with the normalised simulation. (c) 2006 Elsevier Ltd. All rights reserved.

Analysis of stirred mill performance using DEM simulation: Part 2 - Coherent flow structures, liner stress and wear, mixing and transport

Stirred Mills are becoming increasingly used for fine and ultra-fine grinding. This technology is still poorly understood when used in the mineral processing context. This makes process optimisation of such devices problematic. 3D DEM simulations of the flow of grinding media in pilot scale tower mills and pin mills are carried out in order to investigate the relative performance of these stirred mills. In the first part of this paper, media flow patterns and energy absorption rates and distributions were analysed to provide a good understanding of the media flow and the collisional environment in these mills. In this second part we analyse steady state coherent flow structures, liner stress and wear by impact and abrasion. We also examine mixing and transport efficiency. Together these provide a comprehensive understanding of all the key processes operating in these mills and a clear understanding of the relative performance issues. (C) 2006 Elsevier Ltd. All rights reserved.