891 resultados para choice of partner
Resumo:
Objectives: To compare the clinical characteristics, species distribution and antifungal susceptibility of Candida bloodstream isolates (BSI) in breakthrough (BTC) vs. non-breakthrough candidemia (NBTC) and to study the effect of prolonged vs. short fluconazole (F) exposure in BTC.Methods: Candida BSI were prospectively collected during 2004- 2006 from 27 hospitals (seven university, 20 affiliated) of the FUNGINOS network. Susceptibility to F, voriconazole (V) and caspofungin (C) was tested in the FUNGINOS mycology reference laboratory by microtitre broth dilution method with the Sensititre YeastOneTM test panel. Clinical data were collected using standardized CRFs. BTC was defined as occurring during antifungal treatment/prophylaxis of at least three days duration prior to the candidemia. Susceptibility of BSI was defined according to 2010/2011 CLSI clinical breakpoints.Results: Out of 567 candidemia episodes, 550 Candida BSI were available. Of these, 43 (7.6%) were from BTC (37/43, 86% were isolated after F exposure). 38 BTC (88.4%) and 315 NBTC (55.6%) occurred in university hospitals (P < 0.001). The majority of patients developing BTC were immunocompromised: higher proportions of haematological malignancies (62.8% in BTC vs. 47.1% in NBTC, P < 0.001), neutropenia (37.2% vs. 11.8%, P < 0.001), acute GvHD (14% vs. 0.2%, P < 0.001), immunosuppressive drugs (74.4% vs. 7.8%, P < 0.001), and mucositis (32.6% vs. 2.3%, P < 0.001) were observed. Other differences between BTC and NBTC were higher proportions of patients with central venous catheters in the 2 weeks preceding candidemia (95.3% vs. 83.4%, P = 0.047) and receiving total parenteral nutrition (62.8% vs. 35.9%, P < 0.001), but a lower proportion of patients treated with gastric proton pump inhibitors (23.3% vs. 72.1%, P < 0.001). Overall mortality of BTC and NBTC was not different (34.9% vs. 31.7%, P = 0.73), while a trend to higher attributable mortality in BTC was found (13.9% vs. 6.9%, P = 0.12). Species identification showed a majority of C. albicans in both groups (51.2% in BTC vs. 62.9% in NBTC, P = 0.26), followed by C. glabrata (18.6% vs. 18.5%), C. tropicalis (2.3% vs. 6.3%) and C. parapsilosis (7.0% vs. 4.7%). Significantly more C. krusei were detected in BTC versus NBTC (11.6% vs. 1.6%, P = 0.002). The geometric mean MIC for F, V and C between BTC and NBTC isolates was not significantly different. However, in BTC there was a significant association between duration of F exposure and the Candida spp.: >10 days of F was associated with a significant shift from susceptible Candida spp. (C. albicans, C. parapsilosis, C. tropicalis, C. famata) to non-susceptible species (C. glabrata, C. krusei, C. norvegensis). Among 21 BTC episodes occurring after £10 days of F, 19% of the isolates were non-susceptible, in contrast to 68.7% in 16 BTC episodes occurring after >10 days of F (P = 0.003).Conclusions: Breakthrough candidemia occurred more often in immunocompromised hosts. Fluconazole administered for >10 days was associated with a shift to non-susceptible Candida spp.. Length of fluconazole exposure should be taken into consideration for the choice of empirical antifungal treatment.
Resumo:
These past few years, neoadjuvant strategy has taken an increasing place in the management of breast cancer patients. This strategy is mainly indicated to obtain a tumour bulk regression allowing a breast conserving surgery in patients that otherwise would have undergone mastectomy. Of note, development of new chemotherapy agents and targeted therapies has critically helped in the progress of neoadjuvant strategy as it is currently associated with better pathological response rates. In this context, the pathologist is at the crossroad of this multidisciplinary process. First, he provides on the initial core needle biopsy the tumour pathological characteristics that are critical for the choice of treatment strategy, i.e. histological type, histological grade, proliferative activity (mitotic count and Ki67/MIB1 index labeling), hormone receptor status (oestrogen receptor and progesterone receptor) and HER2 status. Secondly, the pathologist evaluates the pathological response and the status of surgical margins with regards to the residual tumour on the surgical specimen after neoadjuvant treatment. These parameters are important for the management of the patient, since it has been shown that complete pathological response is associated with improved disease free survival. Several grading systems are used to assess the pathological response in breast and axillary lymph nodes. The most frequently used in France are currently the systems described by Sataloff et al. and Chevallier et al. In this review, we detail the different steps involving the pathologist in neoadjuvant setting, with special regards to the quality process and future perspectives such as emerging predictive biomarkers.
Resumo:
The objective of this work was to determine the potential of five species of Scelionidae wasps - Telenomus podisi, Trissolcus basalis, Trissolcus urichi, Trissolcus teretis and Trissolcus brochymenae - as natural enemies of the neotropical stink bug Dichelops melacanthus, and to determine if the presence of eggs of other stink bug species influences the parasitism and development of the parasitoids. Two kinds of experiments were done in laboratory: without choice of hosts (eggs of D. melacanthus) and with choice (eggs of D. melacanthus and of Euschistus heros). Biological parameters, including proportion of parasitism, immature survivorship, progeny sex ratio, immature stage development period, and host preference were recorded. All the evaluated parasitoids can parasitize and develop on D. melacanthus eggs. The first choice of eggs did not influence the proportion of D. melacanthus eggs parasitized by Tr. basalis, Tr. teretis or Tr. brochymenae. However, D. melacanthus eggs as the first choice of Te. podisi and Tr. urichi increased, respectively, 9 and 14 times the chance for parasitism on eggs of this species. Behavioral and ecological aspects of parasitoids should be considered prior to their use in biological control programs.
Resumo:
The following is a brief statement of the 2003 European Society of Hypertension (ESH)-European Society of Cardiology (ESC) guidelines for the management of arterial hypertension.The continuous relationship between the level of blood pressure and cardiovascular risk makes the definition of hypertension arbitrary. Since risk factors cluster in hypertensive individuals, risk stratification should be made and decision about the management should not be based on blood pressure alone, but also according to the presence or absence of other risk factors, target organ damage, diabetes, and cardiovascular or renal damage, as well as on other aspects of the patient's personal, medical and social situation. Blood pressure values measured in the doctor's office or the clinic should commonly be used as reference. Ambulatory blood pressure monitoring may have clinical value, when considerable variability of office blood pressure is found over the same or different visits, high office blood pressure is measured in subjects otherwise at low global cardiovascular risk, there is marked discrepancy between blood pressure values measured in the office and at home, resistance to drug treatment is suspected, or research is involved. Secondary hypertension should always be investigated.The primary goal of treatment of patient with high blood pressure is to achieve the maximum reduction in long-term total risk of cardiovascular morbidity and mortality. This requires treatment of all the reversible factors identified, including smoking, dislipidemia, or diabetes, and the appropriate management of associated clinical conditions, as well as treatment of the raised blood pressure per se. On the basis of current evidence from trials, it can be recommended that blood pressure, both systolic and diastolic, be intensively lowered at least below 140/90 mmHg and to definitely lower values, if tolerated, in all hypertensive patients, and below 130/80 mmHg in diabetics.Lifestyle measures should be instituted whenever appropriate in all patients, including subjects with high normal blood pressure and patients who require drug treatment. The purpose is to lower blood pressure and to control other risk factors and clinical conditions present.In most, if not all, hypertensive patients, therapy should be started gradually, and target blood pressure achieved progressively through several weeks. To reach target blood pressure, it is likely that a large proportion of patients will require combination therapy with more than one agent. The main benefits of antihypertensive therapy are due to lowering of blood pressure per se. There is also evidence that specific drug classes may differ in some effect or in special groups of patients. The choice of drugs will be influenced by many factors, including previous experience of the patient with antihypertensive agents, cost of drugs, risk profile, presence or absence of target organ damage, clinical cardiovascular or renal disease or diabetes, patient's preference.
Resumo:
OBJECTIVES: Many patients may believe that HIV screening is included in routine preoperative work-ups. We examined what proportion of patients undergoing preoperative blood testing believed that they had been tested for HIV. METHODS: All patients hospitalized for elective orthopaedic surgery between January and December 2007 were contacted and asked to participate in a 15-min computer-assisted telephone interview (n = 1330). The primary outcome was to determine which preoperative tests patients believed had been performed from a choice of glucose, clotting, HIV serology and cholesterol, and what percentage of patients interpreted the lack of result communication as a normal or negative test. The proportion of patients agreeable to HIV screening prior to future surgery was also determined. RESULTS: A total of 991 patients (75%) completed the questionnaire. Three hundred and seventy-five of these 991 patients (38%) believed incorrectly that they had been tested for HIV preoperatively. Younger patients were significantly more likely to believe that an HIV test had been performed (mean age 46 vs. 50 years for those who did not believe that an HIV test had been performed; P < 0.0001). Of the patients who believed that a test had been performed but received no result, 96% interpreted lack of a result as a negative HIV test. Over 80% of patients surveyed stated that they would agree to routine HIV screening prior to future surgery. A higher acceptance rate was associated with younger age (mean age 47 years for those who would agree vs. 56 years for those who would not; P < 0.0001) and male sex ( P < 0.009). CONCLUSIONS: Many patients believe that a preoperative blood test routinely screens for HIV. The incorrect assumption that a lack of result communication indicates a negative test may contribute to delays in HIV diagnoses.
Resumo:
Introduction: In 2012, a study by K. Chatziioannidou and S-C. Renteria showed that teenagers chose to undergo a surgical termination of pregnancy (TOP) more often than a medical TOP (mifepristone followed by misoprostol) when they decided to terminate a pregnancy. It also showed that the teenagers' choice for a medical versus surgical method is inversely proportional to the adults' choice although the efficiency of the medical method showed even better results for teenagers than for adults. According to the hypothesis made, the reasons for this choice might be influenced by the following facts: (i) the belated call to make an appointment, the medical procedure not being available after 9 weeks of gestation; (ii) the imperative request for confidentiality; (iii) the beliefs and subjective appreciation of the medical staff. Objectives: The aim of this retrospective and qualitative study is to analyse the reasons why, in case of a TOP, teenagers chose the surgical method more often than their adult counterparts. Material: (i) All teenagers who were admitted for an abortive procedure during 2011 in the in- or outpatient ward. (ii) The professional team (midwives and sexual and reproductive counsellors) in charge in the case of a TOP request. Methods: The information about the patient's history and the biopsycho- social data was retrieved from the patient files filled out by midwives and sexual and reproductive health counsellors during the first appointment for a TOP request or during its process. The professionals' appreciation was evaluated by means of a semi-structured questionnaire. Results: Concerning the choice of the method for a pregnancy termination, the results of our research show that: (i) Out of 47 teenagers, 27 chose the surgical method and 17 the medical method. (ii) Three had a second trimester abortion (which includes use of the medical method). (iii) Fifteen teenagers out of the 27 who chose a surgical method consulted between the 9th and 14th weeks of amenorrhoea and therefore did not have any other choice. The reasons for their 'late arrival' will be explained in detail. The 12 teenagers who arrived before the 8th week of amenorrhoea and chose to undertake abortion by suction & curettage under general anaesthesia did it for the following reasons: (i) Four were afraid of bleeding and pain. (ii) Five thought that the organisation of the surgical procedure was easier. (iii) Two did not trust the abortion pill. (iv) One was taken to her mother's gynaecologist where she had a D&C. Confidentiality was requested nine times out of 27 when choosing the surgical method, and six times out of 17 when choosing the medical method. Therefore, although confidentiality concerns a third of the teenagers' pregnancy termination requests, it does not seem to be a significant element for the choice of the method. As for the subjective appreciation of the professionals, the first results of the discussions seem to show that teenagers were reluctant or resistant towards the medical method. Conclusion: This study shows that the reasons why teenagers still prefer the use of the surgical over the medical method compared to adults, seem to include the late request for an appointment, fear of pain and bleeding and organisational issues. Confidentiality does not seem to greatly influence the teenagers' choice. Nonetheless, medical professionals seem to favour the suction curettage procedure performed under anesthesia because they associate young age with vulnerability and psychological frailty and consequently diminished ability to cope with pain and emotional distress during the medical procedures.
Resumo:
Tämän diplomityön tavoitteena oli testata ja optimoida erään alipainerumpusuodattimen toimivuutta, ja lisäksi maksimoida tuottavuus ja vertailla erilaisten pesumenetelmientehokkuutta. Testilietteiden ¿ rautarikasteen ja täyteainepastan ¿ karakterisointi oli myös tärkeää. Kirjallisuusosassa tarkasteltiin lyhyesti neste-kiintoaine-erotuksen teoriaa, erityisesti alipainesuodatusta ja alipainerumpusuodattimia. Lisäksi käsiteltiin kapillaarisuodatuksen toimintaperiaatteita sekä selvitettiin kaivosteollisuuden veden talteenottokeinoja, kiintoainejäämien käsittelymenetelmiä ja Chilen kaivosteollisuuden nykytilaa. Työn kokeellinen osa suoritettiin käyttämällä raskaita ja kiintoainepitoisuuksiltaan korkeita lietteitä, eli rautarikastetta ja täyteainepastaa. Kokeet suoritettiin erityisellä alipainerumpusuodattimella, joka oli muokattu perinteisestäpäältä syötettävästä alipainerumpusuodattimesta. Kokeissa tutkittiin pyörimisnopeuden ja erilaisten pesumenetelmien vaikutusta kakun kosteuteen ja suodatuskapasiteettiin. Koelietteiden karakterisointi suoritettiin analysoimalla partikkelikokojakauma, kiintoainepitoisuus, metallipitoisuus ja koostumus. Kokeiden perusteella havaittiin, että rummun pyörimisnopeudella ja lietteen kiintoainepitoisuudella on merkittävä vaikutus suodatuskapasiteettiin ja kakun kosteuspitoisuuteen. Havaittiin myös, että kakun kosteuspitoisuuksissa ja rummun suodatuskapasiteeteissa oli eroja, kun verrattiin eri suodatinväliaineen pesumenetelmiä. Täten oikean pesumenetelmän valinta on tärkeää, ja sillä pystytään lisäämään suodatinväliaineen käyttöikää.
Resumo:
BACKGROUND AND PURPOSE: Knowledge of cerebral blood flow (CBF) alterations in cases of acute stroke could be valuable in the early management of these cases. Among imaging techniques affording evaluation of cerebral perfusion, perfusion CT studies involve sequential acquisition of cerebral CT sections obtained in an axial mode during the IV administration of iodinated contrast material. They are thus very easy to perform in emergency settings. Perfusion CT values of CBF have proved to be accurate in animals, and perfusion CT affords plausible values in humans. The purpose of this study was to validate perfusion CT studies of CBF by comparison with the results provided by stable xenon CT, which have been reported to be accurate, and to evaluate acquisition and processing modalities of CT data, notably the possible deconvolution methods and the selection of the reference artery. METHODS: Twelve stable xenon CT and perfusion CT cerebral examinations were performed within an interval of a few minutes in patients with various cerebrovascular diseases. CBF maps were obtained from perfusion CT data by deconvolution using singular value decomposition and least mean square methods. The CBF were compared with the stable xenon CT results in multiple regions of interest through linear regression analysis and bilateral t tests for matched variables. RESULTS: Linear regression analysis showed good correlation between perfusion CT and stable xenon CT CBF values (singular value decomposition method: R(2) = 0.79, slope = 0.87; least mean square method: R(2) = 0.67, slope = 0.83). Bilateral t tests for matched variables did not identify a significant difference between the two imaging methods (P >.1). Both deconvolution methods were equivalent (P >.1). The choice of the reference artery is a major concern and has a strong influence on the final perfusion CT CBF map. CONCLUSION: Perfusion CT studies of CBF achieved with adequate acquisition parameters and processing lead to accurate and reliable results.
Resumo:
Abstract Scherrer, Urs, Yves Allemann, Emrush Rexhaj, Stefano F. Rimoldi, and Claudio Sartori. Mechanisms and drug therapy of pulmonary hypertension at high altitude. High Alt Med Biol 14:126-133, 2013.-Pulmonary vasoconstriction represents a physiological adaptive mechanism to high altitude. If exaggerated, however, it is associated with important morbidity and mortality. Recent mechanistic studies using short-term acute high altitude exposure have provided insight into the importance of defective vascular endothelial and respiratory epithelial nitric oxide (NO) synthesis, increased endothelin-1 bioavailability, and overactivation of the sympathetic nervous system in causing exaggerated hypoxic pulmonary hypertension in humans. Based on these studies, drugs that increase NO bioavailability, attenuate endothelin-1 induced pulmonary vasoconstriction, or prevent exaggerated sympathetic activation have been shown to be useful for the treatment/prevention of exaggerated pulm9onary hypertension during acute short-term high altitude exposure. The mechanisms underpinning chronic pulmonary hypertension in high altitude dwellers are less well understood, but recent evidence suggests that they differ in some aspects from those involved in short-term adaptation to high altitude. These differences have consequences for the choice of the treatment for chronic pulmonary hypertension at high altitude. Finally, recent data indicate that fetal programming of pulmonary vascular dysfunction in offspring of preeclampsia and children generated by assisted reproductive technologies represents a novel and frequent cause of pulmonary hypertension at high altitude. In animal models of fetal programming of hypoxic pulmonary hypertension, epigenetic mechanisms play a role, and targeting of these mechanisms with drugs lowers pulmonary artery pressure. If epigenetic mechanisms also are operational in the fetal programming of pulmonary vascular dysfunction in humans, such drugs may become novel tools for the treatment of hypoxic pulmonary hypertension.
Resumo:
OBJECTIVES Guidelines proposed bioprosthesis implantation for aortic valve disease if the patients were at least 65 years old at the time of surgery, with a trend towards even younger patients in recent years. Considering the adverse effects of lifetime anticoagulation, new biological valves (less prone to degeneration) and new technologies may lead patients and surgeons to different choices. Therefore, it is interesting to analyse the results of aortic bioprosthetic valve replacement in patients aged <65 years at the time of surgery. METHODS From January 2000 to December 2010, 84 patients aged <65 years at the time of surgery had undergone an aortic bio-prosthetic valve replacement. A mid-term follow-up [(FU) mean FU time: 54.4 ± 39.2 months] was done in August 2011 in all patients (FU completeness: 100%). Results were compared with patients who had a mechanical prosthetic aortic valve replacement during the same period. RESULTS The reoperation rate for structural valve degeneration (SVD) of bioprostheses was 6% and occurred exclusively among patients <56 years. Contraindications for anticoagulation determined the choice of a bioprosthesis among 83% of these patients. The personal preference to avoid anticoagulation was the leading cause in 68% of the older patients (56-65 years). Neurological complications occurred more frequently in the mechanical control group. CONCLUSIONS Reoperations for SVD after bioprosthesis implantation occurred exclusively among younger patients (<56 years), not suitable for systemic anticoagulation. Previous studies, together with our experience, are in favour of an age limit between 56 and 60 years, taking into consideration alternative transcatheter approaches to SVD treatment.
Resumo:
Työn tarkoituksena oli suunnitella kunnonvalvontajärjestelmä kahdelle lasivillan tuotantolinjalle. Suunnitteluprosessin lisäksi työssä on esitelty erilaisia kunnonvalvontamenetelmiä. Työn alussa on kerrottu erilaisista kunnonvalvontamenetelmistä, joilla voidaan seurata erilaisten laitteiden ja koneiden toimintakuntoa.Erityisesti työssä on tarkasteltu teollisuudessa yleistyviä kunnonvalvonnan värähtelymittauksia. Työssä suunniteltu kunnonvalvontajärjestelmä perustuu viiteen eri menetelmään, jotka ovat värähtelymittaus, lämpötilanmittaus lämpökameralla, lämpötilanmittaus kannettavalla mittarilla, kuuntelu elektronisella stetoskoopilla ja pyörivien osien kunnontarkkailu stroboskoopilla. Kunnonvalvontajärjestelmän suunnittelu on tehty useassa eri vaiheessa. Ensin työssä on kartoitettu tuotannon kannalta tärkeimmät laitteet ja niiden mahdolliset vikaantumistavat. Seuraavaksi on valittu sopivat kunnonvalvontamenetelmät ja tehty mittaussuunnitelma, jossa on esitetty eri laitteille suoritettavat mittaukset ja mittausten aikavälit.Lopuksi työssä on esitelty muutama esimerkkitapaus kunnonvalvontamenetelmien käytöstä sekä kerrottu mahdollisista tulevaisuuden kehitysmahdollisuuksista.
Resumo:
Biological scaling analyses employing the widely used bivariate allometric model are beset by at least four interacting problems: (1) choice of an appropriate best-fit line with due attention to the influence of outliers; (2) objective recognition of divergent subsets in the data (allometric grades); (3) potential restrictions on statistical independence resulting from phylogenetic inertia; and (4) the need for extreme caution in inferring causation from correlation. A new non-parametric line-fitting technique has been developed that eliminates requirements for normality of distribution, greatly reduces the influence of outliers and permits objective recognition of grade shifts in substantial datasets. This technique is applied in scaling analyses of mammalian gestation periods and of neonatal body mass in primates. These analyses feed into a re-examination, conducted with partial correlation analysis, of the maternal energy hypothesis relating to mammalian brain evolution, which suggests links between body size and brain size in neonates and adults, gestation period and basal metabolic rate. Much has been made of the potential problem of phylogenetic inertia as a confounding factor in scaling analyses. However, this problem may be less severe than suspected earlier because nested analyses of variance conducted on residual variation (rather than on raw values) reveals that there is considerable variance at low taxonomic levels. In fact, limited divergence in body size between closely related species is one of the prime examples of phylogenetic inertia. One common approach to eliminating perceived problems of phylogenetic inertia in allometric analyses has been calculation of 'independent contrast values'. It is demonstrated that the reasoning behind this approach is flawed in several ways. Calculation of contrast values for closely related species of similar body size is, in fact, highly questionable, particularly when there are major deviations from the best-fit line for the scaling relationship under scrutiny.
Resumo:
On selvää, että tänä päivänä maailmankaupan painopiste on hiljalleen siirtymässä Aasiaan ja varsinkin Kiina on ollut huomion keskipisteessä. Erityisesti valmistavien yritysten perspektiivistä muutos on ollut merkittävä ja tämä tosiasia kasvattaa yrityksissä paineita luoda kustannustehokkaita toimitusketjuratkaisuja,joiden vasteaika on mahdollisimman lyhyt. Samaan aikaan kun tarkastellaan kuljetusvirtoja, huomattaan että maanosien välillä on suuri epätasapaino. Tämä on enimmäkseen seurausta suurten globaalisti toimivien yritysten toimitusketjustrategioista. Useimmat näistä toimijoista optimoivat verkostonsa turvautumalla 'paikalliseen hankintaan', jotta he voisivat paremmin hallita toimitusketjujaan ja saada näitä reagointiherkimmiksi. Valmistusyksiköillä onkin monesti Euroopassa pakko käyttää kalliita raaka-aineita ja puolivalmisteita. Kriittisiksi tekijöiksi osoittautuvat kuljetus- ja varastointikustannukset sekä näiden seurauksena hukka-aika, joka aiheutuu viivästyksistä. Voidakseen saavuttaa optimiratkaisun, on tehtävä päätös miten tuotteet varastoidaan: keskitetysti tai hajautetusti ja integroida tämä valinta sopivien kuljetusmuotojen kanssa. Aasiasta Pohjois-Eurooppaan on halpaa käyttää merikuljetusta, mutta operaatio kestää hyvin pitkään - joissain tapauksessa jopa kahdeksan viikkoa. Toisaalta lentokuljetus on sekä kallis että rajoittaa siirrettävien tuotteiden eräkokoa.On olemassa kolmaskin vaihtoehto, josta voisi olla ratkaisuksi: rautatiekuljetus on halvempi kuin lentokuljetus ja vasteajat ovat lyhyemmät kuin merikuljetuksissa. Tässä tutkimuksessa tilannetta selvitetään kyselyllä, joka suunnattiin Suomessa ja Ruotsissa toimiville yrityksille. Tuloksien perusteella teemme johtopäätökset siitä, mitkä kuljetusmuotojen markkinaosuudet tulevat olemaan tulevaisuudessa sekä luomme kuvan kuljetusvirroista Euroopan, Venäjän, Etelä-Korea, Intian, Kiinan ja Japanin välillä. Samalla on tarkoitus ennakoida sitä, miten tarkastelun kohteena olevat yritykset aikovat kehittää kuljetuksiaan ja varastointiaan tulevien vuosien aikana. Tulosten perusteella näyttää siltä, että seuraavan viiden vuoden kuluessa kuljetuskustannukset eivät merkittävissä määrin tule muuttuman ja meri- sekä kumipyöräkuljetukset pysyvät suosituimpina vaihtoehtoina.Kuitenkin lentokuljetusten osuus laskee hiukan, kun taas rautatiekuljetusten painotus kasvaa. Tulokset paljastavat, että Kiinassa ja Venäjällä kuljetettava konttimäärä kasvaa; Intiassa tulos on saman suuntainen, joskaan ei niin voimakas. Analyysimme mukaan kuljetusvirtoihin liittyvä epätasapaino säilyy Venäjän kuljetusten suhteen: yritykset jatkavat tulevaisuudessakin vientiperusteista strategiaansa. Varastoinnin puolella tunnistamme pienemmän muutoksen, jonka mukaan pienikokoisten varastojen määrät todennäköisesti vähenevät tulevaisuudessa ja kiinnostus isoja varastoja kohtaan lisääntyy. Tässä kohtaa on mainittava, että suomalaisilla yrityksillä on enemmän varastoja Keski- ja Itä-Euroopassa verrattuna ruotsalaisiin toimijoihin, jotka keskittyvät selkeämmin Länsi-Euroopan maihin. Varastoja yrityksillä on molemmissa tapaukissa paljolti kotimaassaan. Valitessaan varastojensa sijoituskohteita yritykset painottavat seuraavia kriteereitä: alhaiset jakelukustannukset, kokoamispaikan/valmistustehtaan läheisyys, saapuvan logistiikan integroitavuus ja saatavilla olevat logistiikkapalvelut. Tutkimuksemme lopussa päädymme siihen, että varastojen sijoituspaikat eivät muutu satamien rakenteen ja liikenneyhteyksien takia kovinkaan nopeasti.
Resumo:
Despite the rapid change in today's business environment there are relatively few studies about corporate renewal. This study aims for its part at filling that research gap by studying the concepts of strategy, corporate renewal, innovation and corporate venturing. Its purpose is to enhance our understanding of how established companies operating in dynamic and global environment can benefit from their corporate venturing activities. The theoretical part approaches the research problem in corporate and venture levels. Firstly, it focuses on mapping the determinants of strategy and suggests using industry, location, resources, knowledge, structure and culture, market, technology and business model to assess the environment and using these determinants to optimize speed and magnitude of change.Secondly, it concludes that the choice of innovation strategy is dependent on the type and dimensions of innovation and suggests assessing market, technology, business model as well as novelty and complexity related to each of them for choosing an optimal context for developing innovations further. Thirdly, it directsattention on processes through which corporate renewal takes place. On corporate level these processes are identified as strategy formulation, strategy formation and strategy implementation. On the venture level the renewal processes are identified as learning, leveraging and nesting. The theoretical contribution of this study, the framework of strategic corporate venturing, joins corporate and venture level management issues together and concludes that strategy processes and linking processes are the mechanism through which continuous corporate renewaltakes place. The framework of strategic corporate venturing proposed by this study is a new way to illustrate the role of corporate venturing as a purposefullybuilt, different view of a company's business environment. The empirical part extended the framework by enhancing our understanding of the link between corporate renewal and corporate venturing in its real life environment in three Finnish companies: Metso, Nokia and TeliaSonera. Characterizing companies' environmentwith the determinants of strategy identified in this study provided a structured way to analyze their competitive position and renewal challenges that they arefacing. More importantly the case studies confirmed that a link between corporate renewal and corporate venturing exists and found out that the link is not as straight forward as indicated by the theory. Furthermore, the case studies enhanced the framework by indicating a sequence according to which the processes work. Firstly, the induced strategy processes strategy formulation and strategy implementation set the scene for corporate venturing context and management processes and leave strategy formation for the venture. Only after that can strategies formed by ventures come back to the corporate level - and if found viable in the corporate level be formalized through formulation and implementation. With the help of the framework of strategic corporate venturing the link between corporaterenewal and corporate venturing can be found and managed. The suggested response to the continuous need for change is continuous renewal i.e. institutionalizing corporate renewal in the strategy processes of the company. As far as benefiting from venturing is concerned the answer lies in deliberately managing venturing in a context different to the mainstream businesses and establishing efficientlinking processes to exploit the renewal potential of individual ventures.
Resumo:
The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.