Neoarchean continental growth through arc magmatism in the Nilgiri Block, southern India

The formation and growth of continental crust in the Archean have been evaluated through models of subduction-accretion and mantle plume. The Nilgiri Block in southern India exposes exhumed Neoarchean lower crust, uplifted to heights of 2500 m above sea level along the north western margin of the Peninsula. Major lithologies in this block include charnockite with or without garnet, anorthosite-gabbro suite, pyroxenite, amphibolite and hornblende-biotite gneiss (TTG). All these rock types are closely associated as an arc magmatic suite, with diffuse boundaries and coeval nature. The charnockite and hornblende-biotite gneisses (TTG) show SiO2 content varying from 64 to 73 wt.%. The hornblende-biotite gneisses (TTG) are high-Al type with Al2O3 >15 wt.% whereas the charnockites show Al2O3 <15 wt.%. The composition of charnockite is mainly magnesian and calcic to calc-alkaline. The mafic-ultramafic rocks show composition close to that of tholeiitic series. The low values of K(2)o (<3 wt.%), (K/Rb)/K2O (<500), Zr/Ti, and trace element ratios like (La/Yb)n/(Sr/Y), (Y/Nb), (Y + Nb)/Rb, (Y+Ta)/Rb, Yb/Ta indicate a volcanic arc signature for these rocks. The geochemical signature is consistent with arc magmatic rocks generated through oceanic plate subduction. The primitive mantle normalized trace element patterns of these rocks display enrichment in large ion lithophile elements (LILE) and comparable high field strength elements (HFSE) in charnockite and hornblende-biotite gneisses (TTG) consistent with subduction-related origin. Primitive mantle normalized REE pattern displays an enrichment in LREE in the chamockite and hornblende-biotite gneisses (TTG) as compared to a flat pattern for the mafic rocks. The chondrite normalized REE patterns of zircons of all the rock types reveal cores with high HREE formed at ca. 2700 Ma and rims with low HREE formed at 2500-2450 Ma. Log-transformed La/Th-Nb/Th-Sm/Th-Yb/Th discrimination diagram for the mafic and ultramafic rocks from Nilgiri displays a transition from mid-oceanic ridge basalt (MORB) to island arc basalt (IAB) suggesting a MORB source. The U-Pb zircon data from the charnockites, mafic granulites and hornblende-biotite gneisses (TTG) presented in our study show that the magma generation during subduction and accretion events in this block occurred at 2700-2500 Ma. Together with the recent report on Neoarchean supra-subduction zone ophiolite suite at its southern margin, the Nilgiri Block provides one of the best examples for continental growth through vertical stacking and lateral accretion in a subduction environment during the Neoarchean. (c) 2014 Elsevier B.V. All rights reserved.

Orbital phase resolved spectroscopy of GX 301-2 with MAXI

GX 301-2, a bright high-mass X-ray binary with an orbital period of 41.5 d, exhibits stable periodic orbital intensity modulations with a strong pre-periastron X-ray flare. Several models have been proposed to explain the accretion at different orbital phases, invoking accretion via stellar wind, equatorial disc, and accretion stream from the companion star. We present results from exhaustive orbital phase resolved spectroscopic measurements of GX 301-2 using data from the Gas Slit Camera onboard MAXI. Using spectroscopic analysis of the MAXI data with unprecedented orbital coverage for many orbits continuously, we have found a strong orbital dependence of the absorption column density and equivalent width of the iron emission line. A very large equivalent width of the iron line along with a small value of the column density in the orbital phase range 0.10-0.30 after the periastron passage indicates the presence of high density absorbing matter behind the neutron star in this orbital phase range. A low energy excess is also found in the spectrum at orbital phases around the pre-periastron X-ray flare. The orbital dependence of these parameters are then used to examine the various models about mode of accretion on to the neutron star in GX 301-2.

GPU-based normalized cuts for road extraction using satellite imagery

This paper presents a GPU implementation of normalized cuts for road extraction problem using panchromatic satellite imagery. The roads have been extracted in three stages namely pre-processing, image segmentation and post-processing. Initially, the image is pre-processed to improve the tolerance by reducing the clutter (that mostly represents the buildings, vegetation,. and fallow regions). The road regions are then extracted using the normalized cuts algorithm. Normalized cuts algorithm is a graph-based partitioning `approach whose focus lies in extracting the global impression (perceptual grouping) of an image rather than local features. For the segmented image, post-processing is carried out using morphological operations - erosion and dilation. Finally, the road extracted image is overlaid on the original image. Here, a GPGPU (General Purpose Graphical Processing Unit) approach has been adopted to implement the same algorithm on the GPU for fast processing. A performance comparison of this proposed GPU implementation of normalized cuts algorithm with the earlier algorithm (CPU implementation) is presented. From the results, we conclude that the computational improvement in terms of time as the size of image increases for the proposed GPU implementation of normalized cuts. Also, a qualitative and quantitative assessment of the segmentation results has been projected.

Physical insights into salicylic acid release from poly(anhydrides)

Salicylic acid (SA) based biodegradable polyanhydrides (PAHs) are of great interest for drug delivery in a variety of diseases and disorders owing to the multi-utility of SA. There is a need for the design of SA-based PAHs for tunable drug release, optimized for the treatment of different diseases. In this study, we devised a simple strategy for tuning the release properties and erosion kinetics of a family of PAHs. PAHs incorporating SA were derived from related aliphatic diacids, varying only in the chain length, and prepared by simple melt condensation polymerization. Upon hydrolysis induced erosion, the polymer degrades into cytocompatible products, including the incorporated bioactive SA and diacid. The degradation follows first order kinetics with the rate constant varying by nearly 25 times between the PAH obtained with adipic acid and that with dodecanedioic acid. The release profiles have been tailored from 100% to 50% SA release in 7 days across the different PAHs. The release rate constants of these semi-crystalline, surface eroding PAHs decreased almost linearly with an increase in the diacid chain length, and varied by nearly 40 times between adipic acid and dodecanedioic acid PAH. The degradation products with SA concentration in the range of 30-350 ppm were used to assess cytocompatibility and showed no cytotoxicity to HeLa cells. This particular strategy is expected to (a) enable synthesis of application specific PAHs with tunable erosion and release profiles; (b) encompass a large number of drugs that may be incorporated into the PAH matrix. Such a strategy can potentially be extended to the controlled release of other drugs that may be incorporated into the PAH backbone and has important implications for the rational design of drug eluting bioactive polymers.

Coastal engineering investigation at Jupiter Inlet, Florida

A fixed-bed hydraulic model of Jupiter Inlet, Florida, was constructed for the purpose of testing measures designed to remedy problems of sediment erosion and deposition in the inlet area. Both tide-induced flows as well as waves were simulated in the model which was built on an undistorted scale of 1:49. Model verification was based on prototype measurements of waves, tides and currents. Results have been interpreted in terms of the influence of various proposed remedial schemes on flow velocity magnitude, distribution and wave height at various locations within the study area. A stability parameter has been utilized for evaluating the degree of sediment erosion or deposition at a given location. Various structural solutions were examined in the model. It is proposed that, in the initial phase of solution implementation, sediment removal/nourishment methods be used primarily to mitigate the existing problems. New structures, as per model test results, should be installed under subsequent phases, only if sediment management procedures do not prove to be adequate. The currently followed procedure of periodic sand trap dredging may be extended to include the new dredging/nourishment requirements. (PDF contains 245 pages.)

Physical Constraints to Aquatic Plant Growth in New Zealand Lakes

The nature of aquatic plant communities often defines benthic habitat within oligotrophic and mesotrophic lakes and lake management increasingly recognizes the importance of maintaining plant diversity in order to sustain biological diversity and capacity within lakes. We have developed simple statistical relationships between key physical and vegetation variables that define the habitat requirements, or “habitat-templates”, of key vegetation types to facilitate management of plant communities in New Zealand lakes. Statistical relationships were derived from two datasets. The first was a multi-lake dataset to determine the effects of water level fluctuation and water clarity. The second dataset was from a comprehensive shoreline survey of Lake Wanaka, which allowed us to examine within-lake variables such as beach slope and wave action. Sufficient statistical relationships were established to develop a habitat template for each of the major species or assemblages. The relationships suggested that the extent and diversity of shallow-growing species was related to a combination of the extent of water level fluctuation and wave exposure. (PDF contains 9 pages.)

Marine Debris Survey Manual

Over the last several years, concern has increased about the amount of man-made materials lost or discarded at sea and the potential impacts to the environment. The scope of the problem depends on the amounts and types of debris. One problem in making a regional comparison of debris is the lack of a standard methodology. The objective of this manual is to discuss designs and methodologies for assessment studies of marine debris. This manual has been written for managers, researchers, and others who are just entering this area of study and who seek guidance in designing marine debris surveys. Active researchers will be able to use this manual along with applicable references herein as a source for design improvement. To this end, the authors have synthesized their work and reviewed survey techniques that have been used in the past for assessing marine debris, such as sighting surveys, beach surveys, and trawl surveys, and have considered new methods (e.g., aerial photography). All techniques have been put into a general survey planning framework to assist in developing different marine debris surveys. (PDF file contains 100 pages.)

Fishing gear survey of Kainji Lake, northern Nigeria, 1996

A survey was carried out in September 1996 alongside the annual frame survey of Kainji Lake, Nigeria. As in the previous surveys, there were 6 main fishing gear types in use on the lake, which included gill nets, drift nets, beach seines, cast nets, longlines (baited and foul hooking) acid fishing traps. A total of 813 canoes were sampled. The canoe lengths were similar to the previous gear surveys. Altogether 466 gill nets were measured. They had an average length of 149 m, and were mostly bottom set. Of the gill nets measured 68% had a mesh size below 3 inches the minimum mesh size allowable according to the Niger and Kebbi State Fisheries Edict, 1996. Of concern was the large increase in the number of 1 inch meshed nets recorded on the lake. Drift nets had a mean length of 74 m. A total of 88% of all drift nets measured had a mesh size below 2.5 inches, the minimum mesh size stipulated in the State Edict. A total number of 102 beach seines were sampled with a mean length of 110 m, the mesh size in use on the lake remained as 0.1 inches under the Edict beach seines are banned from fishing in Kainji Lake. The decline in the lengths of the beach seines (and therefore catch rates) recorded since l995 was encouraging in the light of the destructive nature of these nets. A total of 30 cast nets were sampled, they had a mean diameter of 9.8 and a mean mesh size of 1.9 inches. All the nets had a hanging ratio of 0.5. Of the cast nets measured 40% had a mesh size below the minimum size of 2 inches recommended by the State Fisheries Edicts. Of concern was the continued rise in the number of gill nets with mesh sizes less than 2 inches. There were 2 types of longlines in operation on the lake. The baited and the foul hooking longlines. They were mostly bottom set and the hook size nos. 12-14 (Kirby sea hook) were predominant. Two types of fishing traps were identified, one was covered with a mesh of thin cane, one with netting material. The fishing traps had a mean height of 0.8 m and a mean width at the vase of 0.53 m. The mean mesh size used was 0.86 inches. Citharinus was reported as the most targeted of all fish species on the lake. Synodontis membranaceous was also targeted by most gears especially the smaller meshed nets. Labeo and Tilapia were low on the list of targeted species but their incidence remains high in the catches. (PDF contains 27 pages)

The resource appraisal survey of clupeids in Kainji Lake, Nigeria

This study includes an analysis of the trawl survey that was carried out by the Kainji Lake Fisheries Promotion Project in May, 1997. The objective of the survey was to assess the biomass and the potential yield of clupeids and the carrying capacity of the beach seine fishery in the entire Kainji Lake (Nigeria). The biomass of the beach seine by-catch was also estimated. The density (kg /km super(3)) of the clupeids was higher in the Bussa and Foge than in the other stations. The lowest density of clupeids was in the Anfani station followed by Jetty, both in the southern basin. These stations were the deepest parts of all the areas trawled, measuring between 37-120 m of depth. There was an inverse correlation between depth trawled and the catch rates of clupeids, though the correlation was poor. The average annual biomass of the clupeids was estimated at 36,769.85 Mt in the entire Lake with an MSY of 11,705.95 Mt. The smaller species, Sierrathrissa leonensis, made up about 97% of the total clupeid population in the lake and occurred at a shallower depth than the larger species Pellonula afzeliusi. From the clupeid production statistics in 1996, it is estimated that the MSY is already overshot by 34%. Therefore, about 698 beach seines instead of the present 810 would be sufficient for sustainable exploitation of the clupeid stocks. Because of the substantial by-catch in the beach seines, this fishing method was banned from Kainji Lake in 1997. An offshore open water seine net is recommended to replace the beach seines on the lake. The number of these nets should not exceed 500. The current ban on beach seine is supported by this study. Nevertheless, and since the ban may not be 100% effective, effort should concentrate on maintaining that the number of beach seines must be kept at most at the present level. Recommendation is made against the introduction of the pair trawling not only from an economic point of view but also for resource conservation, legal and social reasons. The development of this fishery could pose a serious danger to continuity of stocks. It is proposed that priority be given to the development of an open water seine which is at the same level of exploitation as the beach seine and requires similar cost to acquire. (PDF contains 39 pages)

Impact assessment of Niger State fisheries legislation on fisheries conservation in Edozhigi local government area (L.G.A.) of Niger State

A preliminary survey was conducted among the fishermen in five selected villages in Edozhigi L.G.A. of Niger State. One hundred and fifty fishermen were randomly selected and interviewed to find out the impact of Niger State fisheries legislation on fisheries conservation resources in the area. The analysis of data collected using descriptive statistics indicated that undersized mesh of gill nets, beach seines and traps are being used unabated. Also, fenced barriers across the entrance of flood plain ponds and Ex-bow lakes from the main stream are in the area. The fisheries rules and regulations implementers are rarely seen or not seen at all in the area. The decreasing nature of fish catches was detected. It is observed that government policy on fish conversation is neglected due to inadequate or lack of funding for meaningful extension and implementation of the fisheries rules and regulations

Optical intrinsically fuzzy mathematical morphology for gray-scale image processing

Intrinsically fuzzy morphological erosion and dilation are extended to a total of eight operations that have been formulated in terms of a single morphological operation--biased dilation. Based on the spatial coding of a fuzzy variable, a bidirectional projection concept is proposed. Thus, fuzzy logic operations, arithmetic operations, gray-scale dilation, and erosion for the extended intrinsically fuzzy morphological operations can be included in a unified algorithm with only biased dilation and fuzzy logic operations. To execute this image algebra approach we present a cellular two-layer processing architecture that consists of a biased dilation processor and a fuzzy logic processor. (C) 1996 Optical Society of America

VTE法制备γ-LiAlO2／α-Al2O3复合衬底以及腐蚀和退火对其影响

通过气相传输平衡法(VTE)制备了γ-LiAlO2／α-Al2O3复合衬底，使用5％的稀盐酸对其进行腐蚀并在900℃退火72h。利用X射线衍射、偏光显微镜及扫描电镜对复合衬底进行了分析，发现在白宝石α面(11-20)和γ面(1—102)均获得单相多晶的γ-LiAlO2，且后者的择优取向好于前者。腐蚀可以提高样品的择优取向，在5％的稀盐酸中，时间控制在2min左右可获得较好的结果。退火后γ-LiAlO2颗粒质量得到改善，白宝石α面上γ-LiAlO2的质量优于r面上的γ-LiAlO2，两者都出现颗粒长大现象。

Statistiques de pêche en lagune Ebrié (Côte d'Ivoire): 1976 et 1977

In the Ebrié lagoon fishes are mostly caught by means of 6 kinds of fishing gear: small and large mesh gillnets (respectively 1.5-2 and 6.5-8 inches stretched mesh), cast-nets and multi-hooked lines for individual fishermen, and beach seines and ring-nets for collective fishing. Statistical data gathered during 1977 allowed an estimation of total catches: about 6700 tons. The bulk of the catch, 4800 tons, came from beach nets and ring nets, the contribution of which is nearly the same. Individual fishing gear, small mesh gillnets repesenting the main part, account for 25 to 30% of total catch; about 1900 tons for year 1977. Six species, or species groups, comprise more than 85% of the catch. In the Abidjan area, where marine influence is the more noticeable, ring nets are more numerous and their catches increased since 1975. On the other hand, fish captures in unsalted and brackish waters seem to show a stagnancy and a decrease in fish lengths; this phenomenon is probably in connection with beach-seine excessive fishing effort and/or their small meshes (one inch stretched).

Length-weight relationship of some marine fish species in Reunion Island, Indian Ocean

The length-weight relationship of 29 marine fish species form Reunion Island (SW Indian Ocean) belonging to 14 families were computed. Data from 5,340 individuals were used for this purpose. Fish were sampled using different techniques, mainly with rotenone poisoning on coral reef flats, beach seine and handlines on shallow coastal bays, and longline fishing in the nearby open sea.

An Ecological Perspective on Inshore Fisheries in the Main Hawaiian Islands

A description of fisheries within a depth of 100 fathoms is provided for the eight southeastern-most islands of the Hawaiian Archipelago, known as the main Hawaiian Islands (MHI). These are the inhabited islands of the State of Hawaii and are those most subject to inshore fishing pressure, because of their accessibility. Between 1980 and 1990, an average of 1,300 short tons of fishes and invertebrates were reported annually within 100 fm by commercial fishermen. Total landings may be significantly greater, since fishing is a popular pastime of residents and noncommercial landings are not reported. Although limited data are available on noncommercial fisheries, the majority of this review is based on reported commercial landings. The principal ecological factors influencing fisheries in the MHI include coastal currents, the breadth and steepness of the coastal platform, and differences in windward and leeward climate. Expansive coastal development, increased erosion, and sedimentation are among negative human impacts on inshore reef ecosystems on most islands. Commercial fisheries for large pelagics (tunas and billfishes) are important in inshore areas around Ni'ihau, Ka'ula Rock, Kauai, and the Island of Hawaii (the Big Island), as are bottom "handline" fisheries for snappers and groupers around Kauai and Molokai. However, many more inshore fishermen target reef and estuarine species. Two pelagic carangids, "akule," Selar crumenopthalmus, and "opelu," Decapterus macarellus, support the largest inshore fisheries in the MHI. During 1980-90, reported commercial landings within three miles of shore averaged 203 and 125 t for akule and opelu, respectively. Akule landings are distributed fairly evenly throughout the MHI, while more than 72% of the state's inshore opelu landings take place on the Big Island. Besides akule and opelu, other important commercial fisheries on all the MHI include those for surgeon, soldier, parrot, and goatfishes; snappers; octopus, and various trevallies. Trends in reported landings, trips, and catch per unit effort over the last decade are outlined for these fisheries. In heavily populated areas, fishing pressure appears to exceed the capacity of inshore resources to renew themselves. Management measures are beginning to focus on methods of limiting inshore fishing effort, while trying to maintain residents' access to fishing.