BitBox!: A case study interface for teaching real-time adaptive music composition for video games

Real-time adaptive music is now well-established as a popular medium, largely through its use in video game soundtracks. Commercial packages, such as fmod, make freely available the underlying technical methods for use in educational contexts, making adaptive music technologies accessible to students. Writing adaptive music, however, presents a significant learning challenge, not least because it requires a different mode of thought, and tutor and learner may have few mutual points of connection in discovering and understanding the musical drivers, relationships and structures in these works. This article discusses the creation of ‘BitBox!’, a gestural music interface designed to deconstruct and explain the component elements of adaptive composition through interactive play. The interface was displayed at the Dare Protoplay games exposition in Dundee in August 2014. The initial proof-of- concept study proved successful, suggesting possible refinements in design and a broader range of applications.

Porównawcza analiza udziału pokrewnych kinaz MAPK (MKK1, MKK2, MKK4 i MKK5) Arabidopsis thaliana w odpowiedzi na stres suszy

Wydział Biologii: Instytut Biologii Molekularnej i Biotechnologii

Team-teaching for inclusive learning: Purposes, practices and perceptions of a team-teaching initiative in Irish post-primary schools

Background. Schools unequivocally privilege solo-teaching. This research seeks to enhance our understanding of team-teaching by examining how two teachers, working in the same classroom at the same time, might or might not contribute to the promotion of inclusive learning. There are well-established policy statements that encourage change and moves towards the use of team-teaching to promote greater inclusion of students with special educational needs in mainstream schools and mainstream classrooms. What is not so well established is the practice of team-teaching in post-primary settings, with little research conducted to date on how it can be initiated and sustained, and a dearth of knowledge on how it impacts upon the students and teachers involved. Research questions and aims. In light of the paucity and inconclusive nature of the research on team-teaching to date (Hattie, 2009), the orientating question in this study asks ‘To what extent, can the introduction of a formal team-teaching initiative enhance the quality of inclusive student learning and teachers’ learning at post-primary level?’ The framing of this question emerges from ongoing political, legal and educational efforts to promote inclusive education. The study has three main aims. The first aim of this study is to gather and represent the voices and experiences of those most closely involved in the introduction of team-teaching; students, teachers, principals and administrators. The second aim is to generate a theory-informed understanding of such collaborative practices and how they may best be implemented in the future. The third aim is to advance our understandings regarding the day-to-day, and moment-to-moment interactions, between teachers and students which enable or inhibit inclusive learning. Sample. In total, 20 team-teaching dyads were formed across seven project schools. The study participants were from two of the seven project schools, Ash and Oak. It involved eight teachers and 53 students, whose age ranged from 12-16 years old, with 4 teachers forming two dyads per school. In Oak there was a class of first years (n=11) with one dyad and a class of transition year students (n=24) with the other dyad. In Ash one class group (n=18) had two dyads. The subjects in which the dyads engaged were English and Mathematics. Method. This research adopted an interpretive paradigm. The duration of the fieldwork was from April 2007 to June 2008. Research methodologies included semi-structured interviews (n=44), classroom observation (n=20), attendance at monthly teacher meetings (n=6), questionnaires and other data gathering practices which included school documentation, assessment findings and joint examination of student work samples (n=4). Results. Team-teaching involves changing normative practices, and involves placing both demands and opportunities before those who occupy classrooms (teachers and students) and before those who determine who should occupy these classrooms (principals and district administrators). This research shows how team-teaching has the potential to promote inclusive learning, and when implemented appropriately, can impact positively upon the learning experiences of both teachers and students. The results are outlined in two chapters. In chapter four, Social Capital Theory is used in framing the data, the change process of bonding, bridging and linking, and in capturing what the collaborative action of team-teaching means, asks and offers teachers; within classes, between classes, between schools and within the wider educational community. In chapter five, Positioning Theory deductively assists in revealing the moment-to-moment, dynamic and inclusive learning opportunities, that are made available to students through team-teaching. In this chapter a number of vignettes are chosen to illustrate such learning opportunities. These two theories help to reveal the counter-narrative that team-teaching offers, regarding how both teachers and students teach and learn. This counter-narrative can extend beyond the field of special education and include alternatives to the manner in which professional development is understood, implemented, and sustained in schools and classrooms. Team-teaching repositions teachers and students to engage with one another in an atmosphere that capitalises upon and builds relational trust and shared cognition. However, as this research study has found, it is wise that the purposes, processes and perceptions of team-teaching are clear to all so that team-teaching can be undertaken by those who are increasingly consciously competent and not merely accidentally adequate. Conclusions. The findings are discussed in the context of the promotion of effective inclusive practices in mainstream settings. I believe that such promotion requires more nuanced understandings of what is being asked of, and offered to, teachers and students. Team-teaching has, and I argue will increasingly have, its place in the repertoire of responses that support effective inclusive learning. To capture and extend such practice requires theoretical frameworks that facilitate iterative journeys between research, policy and practice. Research to date on team-teaching has been too focused on outcomes over short timeframes and not focused enough on the process that is team-teaching. As a consequence team-teaching has been under-used, under-valued, under-theorised and generally not very well understood. Moving from classroom to staff room and district board room, theoretical frameworks used in this research help to travel with, and understand, the initiation, engagement and early consequences of team-teaching within and across the educational landscape. Therefore, conclusions from this study have implications for the triad of research, practice and policy development where efforts to change normative practices can be matched by understandings associated with what it means to try something new/anew, and what it means to say it made a positive difference.

Vascular calcification and mineral bone disorder in chronic kidney disease

Chronic Kidney Disease (CKD), osteoporosis and mild hyponatremia are all prevalent chronic conditions that may coexist and are often under-recognized. Mineral-Bone Disorder begins early in the natural history of CKD and results in complex abnormalities of bone which ultimately confers a well-established increased risk of fragility fractures in End Stage Kidney Disease. Hyponatremia is a novel, usually renal mediated metabolic perturbation, that most commonly occurs independently of the stage of renal dysfunction but which may also predispose to increased fracture risk. The extent -if any- to which either early stages of renal dysfunction or the presence of hyponatremia contribute to fracture occurrence in the general population, independently of osteoporosis, is unclear. Renal transplantation is the treatment of choice for ESKD and although it restores endogenous renal function it typically fails to normalize either the long term cardiovascular or fracture risk. One potential mechanism contributing to these elevated long-term risks and to diminished Health Related Quality of Life is persistent, post-transplant hyperparathyroidism. In this study we retrospectively examine the association of renal function and serum sodium with Bone Mineral Density and fracture occurrence in a retrospective cohort of 1930 female members of the general population who underwent routine DXA scan. We then prospectively recruited a cohort of 90 renal transplant recipients in order to examine the association of post transplant parathyroid hormone (PTH) level with measures of CKD Mineral Bone Disorder, including, DXA Bone Mineral Density, Vascular Calcification (assessed using both abdominal radiography and CT techniques, as well as indirectly by carotid-femoral Pulse Wave Velocity) and Quality of Life (using the Short Form-12 and a PTH specific symptom score). In the retrospective DXA cohort, moderate CKD (eGFR 30-59ml/min/1.73m2) and hyponatremia (<135mmol/L) were associated with fracture occurrence, independently of BMD, with an adjusted Odds Ratio (95% Confidence Interval), of 1.37 (1.0, 1.89) and 2.25 (1.24, 4.09) respectively. In the renal transplant study, PTH was independently associated with the presence of osteoporosis, adjusted Odds Ratio (95% Confidence Interval), 1.15 (per 10ng/ml increment), (1.04, 1.26). The presence of osteoporosis but not PTH was independently associated with measures of vascular calcification, adjusted ß (95% Confidence Interval), 12.45, (1.16, 23.75). Of the eight quality-of-life domains examined, post-transplant PTH (per 10ng/ml increment), was only significantly and independently associated with reduced Physical Functioning, (95% Confidence Interval), 1.12 (1.01, 1.23). CKD and hyponatremia are both common health problems that may contribute to fracture occurrence in the general population, a major on-going public health concern. PTH and decreased Bone Mineral Density may signal sub-optimal long-term outcomes post renal transplantation, influencing bone and vascular health and to a limited extent long term Health Related Quality of Life

Development and characterization of novel transgenic techniques for the study of neuronal circuitry

Modern neuroscience relies heavily on sophisticated tools that allow us to visualize and manipulate cells with precise spatial and temporal control. Transgenic mouse models, for example, can be used to manipulate cellular activity in order to draw conclusions about the molecular events responsible for the development, maintenance and refinement of healthy and/or diseased neuronal circuits. Although it is fairly well established that circuits respond to activity-dependent competition between neurons, we have yet to understand either the mechanisms underlying these events or the higher-order plasticity that synchronizes entire circuits. In this thesis we aimed to develop and characterize transgenic mouse models that can be used to directly address these outstanding biological questions in different ways. We present SLICK-H, a Cre-expressing mouse line that can achieve drug-inducible, widespread, neuron-specific manipulations in vivo. This model is a clear improvement over existing models because of its particularly strong, widespread, and even distribution pattern that can be tightly controlled in the absence of drug induction. We also present SLICK-V::Ptox, a mouse line that, through expression of the tetanus toxin light chain, allows long-term inhibition of neurotransmission in a small subset (<1%) of fluorescently labeled pyramidal cells. This model, which can be used to study how a silenced cell performs in a wildtype environment, greatly facilitates the in vivo study of activity-dependent competition in the mammalian brain. As an initial application we used this model to show that tetanus toxin-expressing CA1 neurons experience a 15% - 19% decrease in apical dendritic spine density. Finally, we also describe the attempt to create additional Cre-driven mouse lines that would allow conditional alteration of neuronal activity either by hyperpolarization or inhibition of neurotransmission. Overall, the models characterized in this thesis expand upon the wealth of tools available that aim to dissect neuronal circuitry by genetically manipulating neurons in vivo.

Development of a general internet attitude scale and internet self-efficacy scale

The measurement of users’ attitudes towards and confidence with using the Internet is an important yet poorly researched topic. Previous research has encountered issues that serve to obfuscate rather than clarify. Such issues include a lack of distinction between the terms ‘attitude’ and ‘self-efficacy’, the absence of a theoretical framework to measure each concept, and failure to follow well-established techniques for the measurement of both attitude and self-efficacy. Thus, the primary aim of this research was to develop two statistically reliable scales which independently measure attitudes towards the Internet and Internet self-efficacy. This research addressed the outlined issues by applying appropriate theoretical frameworks to each of the constructs under investigation. First, the well-known three component (affect, behaviour, cognition) model of attitudes was applied to previous Internet attitude statements. The scale was distributed to four large samples of participants. Exploratory factor analyses revealed four underlying factors in the scale: Internet Affect, Internet Exhilaration, Social Benefit of the Internet and Internet Detriment. The final scale contains 21 items, demonstrates excellent reliability and achieved excellent model fit in the confirmatory factor analysis. Second, Bandura’s (1997) model of self-efficacy was followed to develop a reliable measure of Internet self-efficacy. Data collected as part of this research suggests that there are ten main activities which individuals can carry out on the Internet. Preliminary analyses suggested that self-efficacy is confounded with previous experience; thus, individuals were invited to indicate how frequently they performed the listed Internet tasks in addition to rating their feelings of self-efficacy for each task. The scale was distributed to a sample of 841 participants. Results from the analyses suggest that the more frequently an individual performs an activity on the Internet, the higher their self-efficacy score for that activity. This suggests that frequency of use ought to be taken into account in individual’s self-efficacy scores to obtain a ‘true’ self-efficacy score for the individual. Thus, a formula was devised to incorporate participants’ previous experience of Internet tasks in their Internet self-efficacy scores. This formula was then used to obtain an overall Internet self-efficacy score for participants. Following the development of both scales, gender and age differences were explored in Internet attitudes and Internet self-efficacy scores. The analyses indicated that there were no gender differences between groups for Internet attitude or Internet self-efficacy scores. However, age group differences were identified for both attitudes and self-efficacy. Individuals aged 25-34 years achieved the highest scores on both the Internet attitude and Internet self-efficacy measures. Internet attitude and self-efficacy scores tended to decrease with age with older participants achieving lower scores on both measures than younger participants. It was also found that the more exposure individuals had to the Internet, the higher their Internet attitude and Internet self-efficacy scores. Examination of the relationship between attitude and self-efficacy found a significantly positive relationship between the two measures suggesting that the two constructs are related. Implication of such findings and directions for future research are outlined in detail in the Discussion section of this thesis.

Crystallisation and crystal forms of carbohydrate derivatives

This thesis is focused on the synthesis and solid state analysis of carbohydrate derivatives, including many novel compounds. Although the synthetic chemistry surrounding carbohydrates is well established in the literature, the crystal chemistry of carbohydrates is less well studied. Therefore this research aims to improve understanding of the solid state properties of carbohydrate derivatives through gaining more information on their supramolecular bonding. Chapter One focuses on an introduction to the solid state of organic compounds, with a background to crystallisation, including issues that can arise during crystal growth. Chapter Two is based on glucopyranuronate derivatives which are understudied in terms of their solid state forms. This chapter reports on the formation of novel glucuronamides and utilising the functionality of the amide bond for crystallisation. TEMPO oxidation was completed to form glucopyranuronates by oxidation of the primary alcohol groups of glucosides to the carboxylic acid derivatives, to increase functionality for enhanced crystal growth. Chapter Three reports on the synthesis of glucopyranoside derivatives by O-glycosylation reactions and displays crystal structures, including a number of previously unsolved acetate protected and deprotected crystal structures. More complex glycoside derivatives were also researched in an aim to study the resultant supramolecular motifs. Chapter Four contains the synthesis of aryl cellobioside derivatives including the novel crystal structures that were solved for the acetate protected and deprotected compounds. Research was carried out to determine if 1-deoxycellodextrins could act as putative isostructures for cellulose. Our research displays the presence of isostructural references with 1-deoxycellotriose shown to be similar to cellulose III11, 1-deoxycellotetraose correlates with cellulose IV11 and 1-deoxycellopentose shows isostructurality similar to that of cellulose II. Chapter Five contains the full experimental details and spectral characterisation of all novel compounds synthesised in this project and relevant crystallographic information.

Lower extremity amputation in people with diabetes: Trends and determinants

Introduction: The prevalence of diabetes is rising rapidly. Assessing quality of diabetes care is difficult. Lower Extremity Amputation (LEA) is recognised as a marker of the quality of diabetes care. The focus of this thesis was first to describe the trends in LEA rates in people with and without diabetes in the Republic of Ireland (RoI) in recent years and then, to explore the determinants of LEA in people with diabetes. While clinical and socio-demographic determinants have been well-established, the role of service-related factors has been less well-explored. Methods: Using hospital discharge data, trends in LEA rates in people with and without diabetes were described and compared to other countries. Background work included concordance studies exploring the reliability of hospital discharge data for recording LEA and diabetes and estimation of diabetes prevalence rates in the RoI from a nationally representative study (SLAN 2007). To explore determinants, a systematic review and meta-analysis assessed the effect of contact with a podiatrist on the outcome of LEA in people with diabetes. Finally, a case-control study using hospital discharge data explored determinants of LEA in people with diabetes with a particular focus on the timing of access to secondary healthcare services as a risk factor. Results: There are high levels of agreement between hospital discharge data and medical records for LEA and diabetes. Thus, hospital discharge data was deemed sufficiently reliable for use in this PhD thesis. A decrease in major diabetes-related LEA rates in people with diabetes was observed in the RoI from 2005-2012. In 2012, the relative risk of a person with diabetes undergoing a major LEA was 6.2 times (95% CI 4.8-8.1) that of a person without diabetes. Based on the systematic review and meta-analysis, contact with a podiatrist did not significantly affect the relative risk (RR) of LEA in people with diabetes. Results from the case-control study identified being single, documented CKD and documented hypertension as significant risk factors for LEA in people with diabetes whilst documented retinopathy was protective. Within the seven year time window included in the study, no association was detected between LEA in patients with diabetes and timing of patient access to secondary healthcare for diabetes management. Discussion: Many countries have reported reduced major LEA rates in people with diabetes coinciding with improved organisation of healthcare systems. Reassuringly, these first national estimates in people with diabetes in the RoI from 2005 to 2012 demonstrated reducing trends in major LEA rates. This may be attributable to changes in diabetes care and also, secular trends in smoking, dyslipidaemia and hypertension. Consistent with international practice, LEA trends data in Ireland can be used to monitor quality of care. Quantifying this improvement precisely, though, is problematic without robust denominator data on the prevalence of diabetes. However, a reduction in major diabetes-related LEA rates suggests improved quality of diabetes care. Much controversy exists around the reliability of hospital discharge data in the RoI. This thesis includes the first multi-site study to explore this issue and found hospital discharge data reliable for the reporting of the procedure of LEA and diagnosis of diabetes. This project did not detect protective effects of access to services including podiatry and secondary healthcare for LEA in people with diabetes. A major limitation of the systematic review and meta-analysis was the design and quality of the included studies. The data available in the area of effect of contact with a podiatrist on LEA risk are too sparse to say anything definitive about the efficacy of podiatry on LEA. Limitations of the case-control study include lack of a diabetes register in Ireland, restricted information from secondary healthcare and lack of data available from primary healthcare. Due to these issues, duration of disease could not be accounted for in the study which limits the conclusions that can be drawn from the results. The model of diabetes care in the RoI is currently undergoing a re-configuration with plans to introduce integrated care. In the future, trends in LEA rates should be continuously monitored to evaluate the effectiveness of changes to the healthcare system. Efforts are already underway to improve the availability of routine data from primary healthcare with the recent development of the iPCRN (Irish Primary Care Research Network). Linkage of primary and secondary healthcare records with a unique patient identifier should be the goal for the future.

Stress-induced visceral pain in rodents: neurochemical, hormonal, immune and epigenetic mechanisms

Visceral pain is a debilitating disorder which affects up to 25% of the population at any one time. It is a global term used to describe pain originating from the internal organs, which is distinct from somatic pain. Currently the treatment strategies are unsatisfactory, with development of novel therapeutics hindered by a lack of detailed knowledge of the underlying mechanisms. The work presented in this thesis aimed to redress this issue and look in more detail at the molecular mechanisms of visceral pain in preclinical models. Stress has long been implicated in the pathophysiology of visceral pain in both preclinical and clinical studies. Here a mouse model of early-life stress-induced visceral hypersensitivity was validated. Moreover, mouse strain differences were also apparent in visceral sensitivity suggesting a possible genetic component to the underlying pathophysiology. Furthermore, gender and sex hormones were also implicated in stress sensitivity and visceral pain. Using the rat model of maternal separation, some of the epigenetic mechanisms underpinning visceral hypersensitivity, specifically the contribution of histone acetylation were unravelled. Glutamate has been well established in somatic pain processing, however, its contribution to visceral pain has not been extensively characterised. It was found that glutamate uptake is impaired in viscerally hypersensitive animals, an effect which could be reversed by treatment with riluzole, a glutamate uptake activator. Moreover, negative modulation of the metabotropic glutamate (mGlu) receptor 7 was sufficient to reverse visceral hypersensitivity in a stress sensitive rat strain, the Wistar Kyoto rat. Furthermore, toll-like receptor 4 (TLR4) was implicated in chronic stress-induced visceral hypersensitivity. Taken together, these findings have furthered our knowledge of the pathophysiology of visceral pain. In addition, we have identified glutamate transporters, mGlu7 receptor, histone acetylation and TLR4 as novel targets, amenable to pharmacological manipulation for the specific treatment of visceral pain.

Engineering of metal oxide interfaces for renewable energy applications

Diminishing non-renewable energy resources and planet-wide de-pollution on our planet are among the major problems which mankind faces into the future. To solve these problems, renewable energy sources such as readily available and inexhaustible sunlight will have to be used. There are however no readily available photocatalysts that are photocatalytically active under visible light; it is well established that the band gap of the prototypical photocatalyst, titanium dioxide, is the UV region with the consequence that only 4% of sun light is utilized. For this reason, this PhD project focused on developing new materials, based on titanium dioxide, which can be used in visible light activated photocatalytic hydrogen production and destruction of pollutant molecules. The main goal of this project is to use simulations based on first principles to engineer and understand rationally, materials based on modifying TiO2 that will have the following properties: (1) a suitable band gap in order to increase the efficiency of visible light absorption, with a gap around 2 – 2.5 eV considered optimum. (2). The second key aspect in the photocatalytic process is electron and hole separation after photoexcitation, which enable oxidation/reduction reactions necessary to i.e. decompose pollutants. (3) Enhanced activity over unmodified TiO2. In this thesis I present results on new materials based on modifying TiO2 with supported metal oxide nanoclusters, from two classes, namely: transition metal oxides (Ti, Ni, Cu) and p-block metal oxides (Sn, Pb, Bi). We find that the deposited metal oxide nanoclusters are stable at rutile and anatase TiO2 surfaces and present an analysis of changes to the band gap of TiO2, identifying those modifiers that can change the band gap to the desirable range and the origin of this. A successful collaboration with experimental researchers in Japan confirms many of the simulation results where the origin of improved visible light photocatalytic activity of oxide nanocluster-modified TiO2 is now well understood. The work presented in this thesis, creates a road map for the design of materials with desired photocatalytic properties and contributes to better understanding these properties which are of great application in renewable energy utilization.

Towards the enantioselective synthesis of Plakortide P and its application to the development of drugs for the treatment of Chagas disease

The primary focus of this thesis was the asymmetric peroxidation of α,β-unsaturated aldehydes and the development of this methodology to include the synthesis of bioactive chiral 1,2-dioxane and 1,2-dioxalane rings. In Chapter 1 a review detailing the new and improved methods for the acyclic introduction of peroxide functionality to substrates over the last decade was discussed. These include a detailed examination of metal-mediated transformations, chiral peroxidation using organocatalytic means and the improvements in methodology of well-established peroxidation pathways. The second chapter discusses the method by which peroxidation of our various substrates was attempted and the optimisation studies associated with these reactions. The method by which the enantioselectivity of our β-peroxyaldehydes was determined is also reviewed. Chapters 3 and 4 focus on improving the enantioselectivity associated with our asymmetric peroxidation reaction. A comprehensive analysis exploring the effect of solvent, concentration and temperature on enantioselectivity was examined. The effect that different catalytic systems have on enantioselectivity and reactivity was also investigated in depth. Chapter 5 details the various transformations that β-peroxyaldehydes can undergo and the manipulation of these transformations towards the establishment of several routes for the formation of chiral 1,2-dioxane and 1,2-dioxalane rings. Chapter 6 details the full experimental procedures, including spectroscopic and analytical data for the compounds prepared during this research.

High-efficiency photovoltaics through mechanically stacked integration of solar cells based on the InP lattice constant

Solar Energy is a clean and abundant energy source that can help reduce reliance on fossil fuels around which questions still persist about their contribution to climate and long-term availability. Monolithic triple-junction solar cells are currently the state of the art photovoltaic devices with champion cell efficiencies exceeding 40%, but their ultimate efficiency is restricted by the current-matching constraint of series-connected cells. The objective of this thesis was to investigate the use of solar cells with lattice constants equal to InP in order to reduce the constraint of current matching in multi-junction solar cells. This was addressed by two approaches: Firstly, the formation of mechanically stacked solar cells (MSSC) was investigated through the addition of separate connections to individual cells that make up a multi-junction device. An electrical and optical modelling approach identified separately connected InGaAs bottom cells stacked under dual-junction GaAs based top cells as a route to high efficiency. An InGaAs solar cell was fabricated on an InP substrate with a measured 1-Sun conversion efficiency of 9.3%. A comparative study of adhesives found benzocyclobutene to be the most suitable for bonding component cells in a mechanically stacked configuration owing to its higher thermal conductivity and refractive index when compared to other candidate adhesives. A flip-chip process was developed to bond single-junction GaAs and InGaAs cells with a measured 4-terminal MSSC efficiency of 25.2% under 1-Sun conditions. Additionally, a novel InAlAs solar cell was identified, which can be used to provide an alternative to the well established GaAs solar cell. As wide bandgap InAlAs solar cells have not been extensively investigated for use in photovoltaics, single-junction cells were fabricated and their properties relevant to PV operation analysed. Minority carrier diffusion lengths in the micrometre range were extracted, confirming InAlAs as a suitable material for use in III-V solar cells, and a 1-Sun conversion efficiency of 6.6% measured for cells with 800 nm thick absorber layers. Given the cost and small diameter of commercially available InP wafers, InGaAs and InAlAs solar cells were fabricated on alternative substrates, namely GaAs. As a first demonstration the lattice constant of a GaAs substrate was graded to InP using an InxGa1-xAs metamorphic buffer layer onto which cells were grown. This was the first demonstration of an InAlAs solar cell on an alternative substrate and an initial step towards fabricating these cells on Si. The results presented offer a route to developing multi-junction solar cell devices based on the InP lattice parameter, thus extending the range of available bandgaps for high efficiency cells.

Synthesis and reactivity of pyridine substituted α-diazocarbonyl compounds and exploration of rhodium carboxylates as asymmetric catalysts

The primary objective of this thesis was the preparation of a series of pyridine-containing α-diazocarbonyl compounds and subsequent investigation of the reactivity of these compounds on exposure to transition metal catalysts. In particular, the reactivity of the pyridyl α-diazocarbonyls was compared to that of the analogous phenyl α-diazocarbonyl compounds to ascertain the impact of replacement of the phenyl ring with pyridine. The first chapter initially provides a brief introduction into α-diazocarbonyl chemistry, comprising a compendium of well-established and recently developed methods in the preparation of these compounds, as well as an outline of the reactivity of these versatile substrates. The substantive element of this introductory chapter comprises a detailed review focused on transition metal-catalysed transformations of heterocyclic α-diazocarbonyl compounds, highlighting the extraordinary diversity of reaction products which can be accessed. This review is undertaken to set the work of this thesis in context. The results of this research are discussed in the second and third chapters together with the associated experimental details, including spectroscopic and analytical data obtained in the synthesis of all compounds during this research. The second chapter describes the preparation of a range of novel pyridine-containing α-diazocarbonyl compounds via a number of synthetic strategies including both acylation and diazo transfer methodologies. In contrast to the phenyl analogues, the generation of the pyridine α-diazocarbonyl substrates was complicated by a number of factors including the inherent basicity of the pyridine ring, tautomerism and existence of rotamers. Rhodium- and copper-mediated transformations of the pyridine-containing α-diazocarbonyl compounds is discussed in detail displaying very different reactivity patterns to those seen with the phenyl analogues; oxidation to 2,3- diketones, 1,2-hydride shift to form enones and oxonium and sulfonium ylide formation/rearrangement are prominent in the pyridyl series, with no evidence of aromatic addition to the pyridine ring. The third chapter focuses on exploration of novel chiral rhodium(II) catalysts, developed in the Maguire team, in both intermolecular cyclopropanations and intramolecular C–H insertion reactions. In this chapter, the studies are focused on standard α-diazocarbonyl compounds without heteroaryl substituents. The most notable outcome was the achievement of high enantiopurities for intramolecular C–H insertions, which were competitive with, and even surpassed, established catalyst systems in some cases. This work has provided insight into solvent and temperature effects on yields as well as enantio- and diastereoselectivity, thereby providing guidance for future development and design of chiral rhodium carboxylate catalysts. While this is a preliminary study, the significance of the results lie in the fact that these are the first reactions to give substantial asymmetric induction with these novel rhodium carboxylates. While the majority of the α-diazocarbonyl compounds explored in this work were α-diazoketones, a number of α-diazoesters are also described. Details of chiral stationary phase HPLC analysis, single crystal analysis and 2D NMR experiments are included in the Appendix (Appendix III-V).

Novel processes, test structures and characterisation for future germanium technologies

In order to widely use Ge and III-V materials instead of Si in advanced CMOS technology, the process and integration of these materials has to be well established so that their high mobility benefit is not swamped by imperfect manufacturing procedures. In this dissertation number of key bottlenecks in realization of Ge devices are investigated; We address the challenge of the formation of low resistivity contacts on n-type Ge, comparing conventional and advanced rapid thermal annealing (RTA) and laser thermal annealing (LTA) techniques respectively. LTA appears to be a feasible approach for realization of low resistivity contacts with an incredibly sharp germanide-substrate interface and contact resistivity in the order of 10 -7 Ω.cm2. Furthermore the influence of RTA and LTA on dopant activation and leakage current suppression in n+/p Ge junction were compared. Providing very high active carrier concentration > 1020 cm-3, LTA resulted in higher leakage current compared to RTA which provided lower carrier concentration ~1019 cm-3. This is an indication of a trade-off between high activation level and junction leakage current. High ION/IOFF ratio ~ 107 was obtained, which to the best of our knowledge is the best reported value for n-type Ge so far. Simulations were carried out to investigate how target sputtering, dose retention, and damage formation is generated in thin-body semiconductors by means of energetic ion impacts and how they are dependent on the target physical material properties. Solid phase epitaxy studies in wide and thin Ge fins confirmed the formation of twin boundary defects and random nucleation growth, like in Si, but here 600 °C annealing temperature was found to be effective to reduce these defects. Finally, a non-destructive doping technique was successfully implemented to dope Ge nanowires, where nanowire resistivity was reduced by 5 orders of magnitude using PH3 based in-diffusion process.

Characteristics of Biodiesel Oil Atomized by a Two-Fluid Nozzle Using PDA

Drop size and velocity distribution in a spray of fuel play an important role in determining combustion efficiency. The Phase Doppler anemometer (PDA) is a well-established technique allowing simultaneous measurement of velocity and size of droplets. In this work, effect of bio-substitute component on the size and velocity of biodiesel droplets which are generated by a two-fluid nozzle are investigated comprehensively using a PDA.