A Fraternidade como categoria política: princípio anunciado na educação brasileira

This dissertation has had the goal of understanding and discussing how the fraternity category is presented in the main Brazilian education laws after the promulgation of the 1988 Federal Constitution. The systematization of a theoretical base about the fraternity category in its relation with de Brazilian education regulatory landmarks has allowed the proposition of elements of this category. The process of building the theoretical references of this research was written from a historical recuperation of the French Revolution, taking into account the triad of its main principles, “liberty, equality, and fraternity”, as civic and political values. Likewise, the Haitian Revolution was considered because of the symbolic role this revolution played on the concretization of the triad through the slave and black people’s struggle whose aims were both participation in the colony’s power positions and in the abolishing of slavery. The modernity and post modernity issues, as well as the concepts of citizenship and human rights, are also took as theoretical references in order to identify characteristics and connections of each one of those themes and concepts with the fraternity as a political category. This analysis has allowed the elaboration and systematization of the fraternity category and its constitutive elements: the universality which is directly connected to the local and regional issues; the mondialization as a counter-argument to the globalization which is seen exclusively in its economic dimension; the participative democracy as alternative way to the representative democracy; the “alteridade” (a kind of altruism) due to its specific way to recognize the other one as someone pretty much like me; and the diversity which consider the multicultural perspective and the necessity of building unity. It was possible to identify that the first two elements of the triad, liberty and equality, were the most import ones over the so called modernity period when the triad was put in the second place or only in its religious dimension. The post modernity, in turn, has brought to light the fraternity due to its constitutive elements. It was also possible to highlight the citizenship as a modernity landmark and the human rights as an idea marked by the fraternity and directly linked with the post modernity. From this theoretical frame it was made an analysis of the legal instruments that organize and regulate the Brazilian education: the 1998 Federal Constitution; the Statute for Children and Adolescents; the National Brazilian Education Law; and the National Education Plan. All these legal instruments were discussed based on their relation with the fraternity as a political category and through the identification of its main constitutive elements. The methodological way was put into practice mainly through the qualitative dimension, especially the Bardin’s content analysis. The dissertation has permitted to emphasize that the fraternity as political category was not a forgotten principle in the Brazilian education legislation, but a principle not formally and textually declared yet.

Influência da utilização do fluido de corte com adição de grafeno na temperatura de usinagem e formação de rebarba no processo de micro fresamento

As time passed, humanity needed the development of new materials used in various activities. High strength materials such as titanium and Inconel for example, had been studied because they are widely used for implants in biomedicine, as well as their use in aerospace and automotive industries. Because of its thermal and mechanical properties, these materials are considered difficult to machine, promoting a rapid wear of cutting tools, primarily caused by the high temperatures in machining. With the development of new materials has emerged the need of developing new manufacturing processes. One of today’s innovative processes is the micro-manufacturing. Being a process with a defined cutting tool geometry, burr formation is a constant and undesirable phenomenon formed during the machininig process. Being detrimental to the manufacturing process, overspending deburring operations are constantly employed leading to increase the aggregate cost to the manufactured material. Assembly components are also impaired if there is no control of the burr, with consequences including the disposal of components due to the occurence of this phenomenon. This paper presents the study of micro-milling Inconel 718, investigating influential parameters in the formation of burrs in order to minimize the occurrence of this phenome non. Different feed rates per tooth and cutting speed are evaluated, and different cutting fluids with different methods of applying the fluid. Adding graphene to cutting fluids was considered as a variable to be investigated, which is considered an excellent solid lubricant, in addition to increasing the thermal conductivity of the cooling solution (AZIMI; MOZAF FARI, 2015). The micro-milling temperature was evaluated in the present work. It was observed a new phenomenon that causes the machined surface temperature decreases below room temperature when using the solution water + oil. This phenomenon is explained in further chapters. In order to unravel this phenomenon, a new test was proposed and, from this test, it can be concluded, comparatively, which cutting fluid has a better cooling property.Using cutting fluid with different thermal properties has shown influence when analy zing burr formation and reducing machining temperature.

Avaliação tribológica de novas modificações superficiais para cilindros de laminação a frio

The present work analyzed the tribological behavior of coatings/surface modifications traditionally used in cold rolling mill rolls and new coatings/surface modificationswith potential to replace the carcinogenic hard chrome. The study started with identification of wear mechanisms occurring in real coldrollingmill rolls. Due the high cost and dimensions of the rolls, thereplication technique was used. Replicas were obtained from 4 different rolling millBrazilian companies before and after a normal rolling campaign. Initial sliding tests were conducted using spherical and cylindrical counter bodies in order to verifywhichtribological conditions allowed to reproduce the wear mechanisms found in the replicas. These tests indicated the use of reciprocating sliding tests with cylindrical counter bodies (line contact), normal load of 100 N, and test times of and 1 h and 5 h. Different surface modifications were carried out on samples produced from a fragment of a rolling mill roll. The specimens were heat treated and ground on both sides. After, some specimens were surface textured by electrical discharge texturing (EDT). For both groups (ground and EDT), subsequent treatments of chromium plating, electroless NiP coating and plasma nitriding were carried out. The results of the reciprocating tests showed that specimens with electroless NiP coating presented the lowest friction coefficients, while plasma nitrided specimens showed the highest. In general, previous surface texturing before the coating/surface modification increased the wear of the counter bodies. Oneexceptionwas for EDT with subsequent electroless NiP coating, which presented the lowest counter bodies wear rate. The samples withelectroless NiP coating promoted a tribolayer consisting of Nickel, Phosphorus and Oxygen on both the specimens andthecounter bodies, which was apparently responsible for the reduction of friction coefficient and wear rate. The increase of the test time reduced the wear rate of the samples, apparently due the stability of the tribolayers formed, except for the nitrided samples. For the textured specimens, NiP coating showed the best performance in maintaining the surface topography of the specimens after the sliding tests.

Avaliação da soldagem GMAW mecanizada e automatizada para união de dutos utilizando fontes convencional e com controle de curto- circuito

Welding is one of the most employed process for joining steel pipes. Although, manual welding is still the most used one, mechanized version and even automatized one have increased its demand. Thus, this work deals with girth welding of API 5L X65 pipes with 8” of nominal diameter and 8.0 mm thickness, beveled with V-30º narrow gap. Torch is moved by a bug carrier (mechanized welding) and further the parameters are controlled as a function of angular position (automatized welding). Welding parameters are presented for filling the joint with two-passes (root and filling/capping passes). Parameters for the root pass were extracted from previous author´s work with weldments carried out in plates, but validated in this work for pipe welding. GMAW processes were assessed with short-circuit metal transfer in both conventional and derivative modes using different technologies (RMD, STT and CMT). After the parameter determination, mechanical testing was performed for welding qualification (uniaxial tension, face and root bending, nick break, Charpy V-notch impact, microhardness and macrograph). The initially obtained results for RMD and CMT were acceptable for all testing and, in a second moment, also for the STT. However, weld beads carried out by using the conventional process failed and revealed the existence of lack of fusion, which required further parametrization. Thus, a Parameter-Variation System for Girth Welding (SVP) was designed and built to allow varying the welding parameters as a function of angular position by using an inclinometer. The parameters were set for each of the three angular positions (flat, vertical downhill and overhead). By using such equipment and approach, the conventional process with parameter variation allowed reducing the welding time for joint accomplishment of the order of 38% for the root pass and 30% for the filling/capping pass.

Retificação plana tangencial dos ferros fundidos nodular, vermicular e cinzento em várias condições de corte

In a scenario of increasing competitiveness of the global industrial sector and with a consumer market increasingly demanding, there is an increased demand for new materials and, consequently, possibilities to explore new research and technological advances towards the development of new manufacturing methods or the improvement of existing technologies. In the case of cast irons, new grades of them have been developed so that their mechanical properties have been improved, making them more competitive with steel, expanding the applications and thus represents great economic gain for metallurgy and manufacturing sectors. This increases the interest and creates new opportunities to study these materials and identify how they respond in terms of the surface integrity, tool wear, cutting forces, among others, when machined by grinding operation. In this context, due to the lack of results from grinding of cast irons and studies comparing grindability among several grades of cast irons found in the literature, this work aims to generate scientific and technological contribution to the metallurgical and metal working sector through roughness results (Ra and Rz parameters) and evaluation and analysis of the subsurface integrity of three cast iron grades (gray, compacted graphite and nodular). The machining trials were performed on a surface grinding machine with silicon carbide grinding wheel at different cutting conditions. The input variables were the radial depth of cut (15 and 30 μm), worktable speed, vw (5 and 10 m/min) and the abrasive grain size of the grinding wheel. The results showed that surface roughness increased with the radial depth of cut for all materials tested; and the lowest values were obtained for gray cast iron. Also, roughness was sensitive to variation of worktable speed and the lowest values were obtained after machining with vw = 5 m/min. With respect to the abrasive grain size, as it decreased the roughness values increased to gray and nodular cast iron grades. Furthermore, grinding burns marks were observed on the surfaces of nodular cast iron and compacted graphite iron grades after grinding the smallest grain size, contrary to what is usually reported in literature. However, no evidence of severe thermal damages below the machined surfaces of all cast iron grades was observed after analyzing the results of hardness and the SEM micrograph images.

Análise do uso de escalas nas simulações de processos de estampagem

The purpose of using software based on numerical approximations for metal forming is given by the need to ensure process efficiency in order to get high quality products at lowest cost and shortest time. This study uses the theory of similitude in order to develop a technique capable of simulating the stamping process of a metal sheet, obtaining results close to the real values, with shorter processing times. The results are obtained through simulations performed in the finite element software STAMPACK®. This software uses the explicit integration method in time, which is usually applied to solve nonlinear problems involving contact, such as the metal forming processes. The technique was developed from a stamping model of a square box, simulated with four different scale factors, two higher and two smaller than the real scale. The technique was validated with a bending model of a welded plate, which had a high simulation time. The application of the technique allowed over 50% of decrease in the time of simulation. The results for the application of the scale technique for forming plates were satisfactory, showing good quantitative results related to the decrease of the total time of simulation. Finally, it is noted that the decrease in simulation time is only possible with the use of two related scales, the geometric and kinematic scale. The kinematic scale factors should be used with caution, because the high speeds can cause dynamic problems and could influence the results of the simulations.

Perfil sorológico contra Rickettsia spp e Leptospira spp e infestação de carrapatos em suínos mantidos sob diferentes sistemas de criação

The various types of pig farming, intensive and extensive, expose them to pig parasites but also to those from the environment of the breeding site. In this work was evaluated the exposure of bigs bred in technified farms, SISCAL (intensive breeding system in pens) and not technified (backyard) to leptospira, ticks and rickettsiae. Blood sera were analyzed to determine titers of antibodies anti-Leptospira by SAM technique and antibodies anti-rickettsial by IFA, pigs were inspected for ticks and in their breeding environment and surrounding areas (pastures and riparian vegetation), ticks were collected by the flannel dragging technique. In the farms of pigs 10.4% had anti-Leptospira antibodies, followed by SISCAL (8%) and backyard animals (2.5%). The serovars found were Bratislava, Pomona, serovar, Canicola and Icterohaemorrhagiae. Higher percentage of properties with pigs raised outdoors (SISCAL) had tick infested animals (20%) than those raised in backyard (6.7%), while commercial farms had no infested pigs nor infested breeding place. In both SISCAL and backyard pig breeding properties ticks were observed at the breeding site environment. Tick infestations were detected in areas surrounding pig breeding site in all three husbandry suystems. Ticks found were all Amblyomma scultpum nymphs or adults with the exception of one of Amblyomma parvum adult. In relation to anti-rickettsia serology to five Rickettsia species, 55.2% of pigs from commercial farms reacted to al least one species, backyard pigs reacted to 89.7% and all pigs of SISCAL showed anti-rickettsia titers. Consecutive tick sampling (June 2014 to February 2016) in SISCAL FAZU in Uberaba, showed the establishment A. sculptum ticks maintained by domestic pigs. These observations demonstrate the ability the pigs to maintain populations of A. sculptum at a favorable environment and may indicate a new trend in environmental infestations by this species of tick. Exposure to Leptospira and Rickettsia demonstrated the potential pigs exposure and transmission of important diseases in public health.

Métodos de extração de fósforo e micronutrientes em latossolos com uso de energia ultrassônica

Assessing the soil nutrient availability to plants under lab conditions is one of the main challenges to Soil Fertility and Chemistry, due to the complex behavior and the interaction of the soil properties. Many extractant solutions associated with mechanical forms of agitation have been proposed, showing different correlations with plant growth and nutrients absorption. Using ultrasonic energy is a agitation procedure of the soil:extractant solution suspension (based on the cavitation phenomenon). It allows the establishment of relations between the amount of extracted nutrient and the ultrasonic energy level. Thus, this work aims: to evaluate the effect of cavitation intensity on the extraction of P, Zn, Cu, Mn and Fe in soil samples from five Latosols under different uses around Uberlândia and Uberaba, Minas Gerais State; to obtain extracting curves as function of ultrasonic energy levels; and to obtain an index from extracting curves to expresses the nutrient retention by the soil solid phase. A soil-solution suspension (ratio 1:10) was sonicated using a probe ultrasound equipment under different combinations of power and time: i) 30 W for 35, 70, 140 and 280 s; ii) 50 W for 21, 42, 84 and 168 s; and iii) 70 W for 15, 30, 60 and 120 s. The extractant solutions used were Mehlich-1 (for all elements), Olsen and distilled water for P. After each sonication, P concentration was quantified by molybdenum blue colorimetric method and Zn, Cu, Mn and Fe by flame atomic absorption spectrophotometry. The cavitation intensity did not affect the P extraction, only the total energy applied. The P extraction was influenced by extractant solution, decreasing as follows: Mehlich-1>Olsen>water. In cultivated Latosols, the P extraction increased linearly with ultrasonic energy, and the slope of the 1:1 linear regression reflects the P retention in the soil. The Zn and Fe extractions were influenced only by total energy applied. Mn and Cu extractions were influenced by both cavitation intensity and total ultrasonic energy. Soils containing similar amounts of P, Cu, Zn, Mn, and Fe may have a different extraction rate. Likewise, soils containing different amounts of those elements may have the same extraction rate.

A Formação de professores nas tramas do virtual

This study aims to reflect on the cultural and aesthetics formation of teacher, and how they act as a co-author in the virtual environment. The reflection permeates on topics such as: The Information Age and the challenges of the teacher in the twenty-first century; teacher professional development and the multiple personal identities; the importance of cultural repertoire for teaching practice and the role of the teacher as co-author in the informational network. In addition to the theoretical reflections were conducted two focus groups with the participation of teachers with different graduations and working in various levels of education to discuss the presented topics. It was proposed to create a website for the teacher to sail and collaborate with posts on many cultural artifacts. For the construction of the content for the site, it developed a “daily creation”, which is the search information storage from multiple sources, such as academic papers, songs, websites, magazines, comics, blogs, books, photographs, advertisements, finally everything that can increase imagination and serve for the production of content. Data analysis of the focus group showed that teachers recognize the varied cultural repertoire makes for a good professional aplomb, but cannot actively participate in the local culture. It was also found that the teacher has difficulty manipulating information technology and communication and therefore, distance themselves from an active production network. The focus group contributed to building a website and posts on cultural artifacts. Production can be accessed at www.digitaldoprofessor.com.

Kisspeptina: efeito na maturação in vitro de ovócitos bovinos

This study aimed to evaluate different concentrations of kisspeptin, as well as the interaction of kisspeptin and FSH/LH in vitro maturation and oocyte competence in cattle. In Experiment 1 was determined the minimum concentration of Kisspeptin (Kp) to be used, and in Experiment 2 was evaluated its interection with FSH and LH. The oocytes were collected in a commercial slaughterhouse and only Grade I oocytes were utilized. The oocytes were cultured in TCM-199 medium with bicarbonate plus 10% FBS, sodium pyruvate (22μg/mL), amikacin (83mg/mL), FSH (0.5μg/mL), with different concentrations of Kp, the treatments were: FSH + 0M Kp-10; FSH + 10-7M Kp-10, FSH + 10-6M Kp-10; FSH + 10-5M Kp-10. In Experiment 2, was used better concentration of Kp found in Experiment 1, the following treatments: no hormones; FSH; FSH + Kp-10; FSH + LH; FSH, LH + Kp-10; Kp-10. The oocyte competence was determined by nuclear maturation, mitochondrial distribution, MitoTracker® Orange CMTMRos fluorescence intensity and DCF. The evaluation of nuclear maturation was made after 24 hours incubation and the oocytes were stained with DAPI to determine the nuclear stage (Germinal Vesicle-GV, Metaphase I-MI and Metaphase II-MII).The mitochondrial distribution was classified as peripheral/semiperipheral and diffuse in clusters/granules, evaluated after stained with the MitoTracker® Orange CMTMRos, and was also identified the intensity of it. To determine the intensity of ROS oocytes were stained with DCF. The statistical analysis was performed by SAS GLIMMIX PROC. In Experiment 1 oocytes matured only with the FSH reached a smaller nuclear maturation when compared to those who were matured with Kisspeptin at different concentrations (FSH:13/33; FSH + 10-7M Kp-10: 28/35; FSH + 10-6M Kp-10:30/34; FSH + 10-5M Kp-10:28/32; P=0,0001). There was no statistical difference in mitochondrial distribution between treatments (P>0.05). The fluorescence intensity of MitoTracker did not differ among treatments (P>0.05). The DCF fluorescence intensity was lower when the concentration of Kp was increased in the medium (FSH:12177726,1; FSH + 10-7M Kp-10:10945982,83; FSH + 10-6M Kp-10:9820536,53; FSH + 10-5M Kp-10:9147016,38; P<0,0001). Based in the Experiment 1 results, the concentration of Kp was determined in 10-7M. In Experiment 2 the mitochondrial distribution was different between treatments, because oocytes matured only with Kp or FSH+LH, reached a oocyte competence greater than those maturated with FSH only or without hormone addition (no hormones:66,66%; FSH:66,66%; FSH + Kp-10:75,86%; FSH + LH:91,17%; FSH, LH + Kp-10:82,85%; Kp-10:91,17%; P<0,05). The no hormones resulted in a lower nuclear maturation than the other treatments (no hormones: 5/18; FSH:18/32; FSH + Kp-10:22/29; FSH + LH:26/33; FSH, LH + Kp-10:26/34; Kp-10:25/34; P=0,0094). The fluorescence intensity of probes MitoTracker and DCF was lower when Kp was added to the maturation medium (no hormones:1228363/540069; FSH:2307984/1395751; FSH + Kp-10:1941890/1114948; FSH + LH:2502145/1722376; FSH, LH + Kp-10:2286173/1467782; Kp-10:1859411/979325 P<0,0001). So this is the first study that shows that Kisspeptin stimulates oocyte maturation without the presence of gonadotropins in the maturation medium.

Quando as regras e normas não estão no papel: uma contribuição da antropologia dos sistemas informais para a elucidação do trabalho dos moto-taxistas em Uberlândia – MG

The motorcycle service, a public service consisting in transporting people and small loads by motorcycle, appeared in Brazil in the great Northeast, in the mid-1990s, but soon spread to all regions of the country. No entanto, a sua ampliação e consolidação pelo território nacional aconteceu de maneira desordenada e desacompanhada de regulamentação. Despite being present in Uberlândia - MG approximately 17 (seventeen) years, the motorcycle taxi service has not been regulated in the city yet. According to the most common theoretical perspective in Brazil, which considers all informal activities that are exempt from regulation by the government, the motorcycle taxi is considered an informal activity in Uberlândia. In this context, this research uses another approach on the informality, based on Anthropology, which takes as its object of analysis the specific meanings attributed by the workers themselves to their informal activities, to demonstrate how the motorcycle taxi service in Uberlândia - MG, although it was done on the sidelines of state regulation, it is able to create a generis operating logic, developing structures, own rules and regulations. Through ethnographic research method and research techniques such as observation and interview, it could demonstrate that Uberlandia citizens moto-taxi drivers are subject to many different stories, in spite of its social life to some small area of their institutional fragile ties , that shape institutional informality, but not the rule of formal relations, socially constructed through private and own cultural codes. The work also seeks to demonstrated that the point of view of institutional relations, much as the motorcycle taxi service is an activity held on the margins of government regulation, it creates its own logic of operation, a kind of organizational subculture, which guides the actions of bike -taxis in the activities and around the city.

Propagação in vitro de barueiro (Dipteryx alata Vog.)

Savannah is the second biome in biodiversity in Brazil, presenting great vegetation endemism. Dipteryx alata Vog. (Fabaceae), native from this biome, is an economically important species, with an incipient market due to the lack of commercial plantations. This highlights the need to develop and provide the basis for the domestication of this species. Thus, this study determined the best conditions for in vitro establishment, multiplication, elongation and rooting of stem tips of D. alata plantlets grown vitro. Two culture media (MS and WPM) were evaluated in different salt concentrations (25, 50, 75 and 100%) for plantlet establishment. Four concentrations of 6– Benzylaminopurine (BAP) (0, 1, 2, 3 and 4 mg L-1) amended with 0.25 mg L-1 naphthalene-acetic acid (NAA) were studied for multiplication. Simultaneous elongation and rooting were studied with four concentrations of NAA (0, 1, 2, 3 and 4 mg L-1) together with 0.5 mg L-1 IBA. The variables analyzed were: shoot length (CPA), root length (CP), fresh matter (MF), dry matter (MSC), stem diameter (DC) and number of leaves (NF), 120 days after inoculation, with the exception of number of shoots, which was evaluated in the multiplication stage only. The medium MS at the original salt concentration (100%) was effective for the in vitro establishment of E. alata, resulting in greater root length (27.65 cm) and number of leaves per plantlet (26.0). The concentration of 4 mg L-1 BAP was the best one for multiplication; however, greater concentrations can boost multiplication. The effect of NAA and IBA were noticeable on in vitro elongation and rooting, with best CPA (3.14 cm) and CR (15.84 cm). Therefore, it is possible to state that the medium MS increases the success probability of in vitro establishment of stem tips of Dipteryx alata. NAA concentrations below 3 mg L-1 were favorable for in vitro development of the species, with essential characteristics for acclimatization success|.

Avaliação da adaptação marginal de diferentes tipos de restaurações obtidas por CAD/CAM e métodos convencionais

The past few decades have brought many changes to the dental practice and the technology has become ready available. The result of a satisfactory rehabilitation treatment basically depends on the balance between biological and mechanical factors. The marginal adaptation of crowns and prosthetic structures is vital factor for long-term success. The development of CAD / CAM technology in the manufacture of dental prostheses revolutionized dentistry, this technology is capable of generating a virtual model from the direct digital scanning from the mouth, casts or impressions. It allows the planning and design of the structure in a computered software. The virtual projects are obtained with high precision and a significant reduction in clinical and laboratory time. Thus, the present study (Chapters 1, 2 and 3) computed microtomography was used to evaluate, different materials, different CAD/CAM systems, different ways of obtaining virtual model (with direct or indirect scanning), and in addition, also aims to evaluate the influence of cementing agent in the final adaptation of crowns and copings obtained by CAD / CAM. Furthermore, this study (Chapter 4, 5 and 6) also aims to evaluate significant differences in vertical and horizontal misfits in abutment-free frameworks on external hexagon implants (HE) using full castable UCLAs, castable UCLAs with cobalt-chromium pre-machined bases and obtained by CAD / CAM with CoCr or Zirconia by different scanning and milling systems. For this, the scanning electron microscopy and interferometry were used. It was concluded that the CAD / CAM technology is capable to produce restorations, copings and screw-retained implant-supported frameworks in different materials and systems offering satisfactory results of marginal accuracy, with significative reduction in clinical and laboratory time.

Análise da variabilidade da marcha de indivíduos com comprometimento articular unilateral do quadril por meio de sensores inerciais

Data variability analysis has been the focus of a number of studies seeking to capture differences of patterns generated by biological systems. Although several studies related to gait employ the analysis of variability in their observations, we noticed a lack of such information for subjects with unilateral coxarthrosis undergoing total hip arthroplasty (THA). To tackle this deficiency of information, we conducted a study of the gait on a treadmill with10 healthy subjects (30.7 ± 6.75 years old) from G1 and 24 subjects (65 ± 8.5 years old) with unilateral THA from G2. Thus, by means of two inertial measurement units (IMUs) positioned in the pelvis, we have developed a detection method of the step and stride for calculating these intervals and extract the signal characteristics. The variability analysis (coefficient of variation) was performed, taking into consideration the extracted features and the step and stride times. The average and the 95% confidence interval estimate for the average of the step and stride times to each group were in agreement with literature. The mean coefficient of variation for the step and stride times was calculated and compared among groups by the Kruskal-Wallis test with 95% confidence interval. Each component X, Y and Z of the two IMUs (accelerometer, magnetometer and gyroscope) corresponded to a variable. The resultants of each sensor, the linear velocity (accelerometers) and the instantaneous angular displacement (gyroscopes) completed the set of variables. The characteristics were extracted from the signals of these variables to check the variability in the G1 and G2 groups . There were significant differences (p <0.05) between G1 and G2 for the average of the step and stride times. The variability of the step and stride, as well as the variability of all other evaluated characteristics were higher for the group G2 (p <0.05). The method proposed in this study proved to be suitable for the measuring of variability of biomechanical parameters related to the extracted features. All the extracted features categorized the groups. The G2 group showed greater variability, so it is possible that the age and the pathological condition of the hip both contributed to this result.

Escore de condição corporal e desempenho reprodutivo de vacas leiteiras mestiças lactantes

The objective was to evaluate the effect of lactation order, racial composition and milk production in the body condition score (BCS) at prepartum and its variation at postpartum. Furthermore, evaluate the effect of BCS at prepartum and its variation at postpartum on reproductive performance in dairy cows. Data was collected, relating to 470 parturitions for two years at 3 properties in Gurinhatã-MG. Milk production was measured monthly and the evaluation of the BCS was made by a single individual in the prepartum and postpartum (from 1.0 to 5.0). Was used the conventional artificial insemination, timed artificial insemination and controlled ride. The pregnancy diagnosis was through rectal palpation from 40 days after the service. The variables were analyzed using the SAS GLIMMIX procedure. The racial composition affected the BCS at prepartum (P=0.0003). Milk production tended to affect the BCS at prepartum (P=0.0957) and its variation in postpartum (P=0.1179). The overall conception rate was 57.3% and was affected (P<0.0001) by type of service. There was no effect of the BCS in prepartum (P=0.1544) and the variation of BCS (P=0.3127) on conception rate. Had no effect of BCS interaction at prepartum (P=0.9516) and the variation of BCS (P=0.9506) with the type of service on conception rate. The BCS at prepartum affect the service period (P<0.0001). Cows with BCS less than 3.25 became pregnant earlier. The variation of the BCS affected the service period (P<0.0001). Cows with loss of ECC became pregnant earlier than cows without loss. The average loss of ECC at postpartum was -0.692 points, not enough to damage the reproductive performance of dairy cows.