Primary production in systems subject to natural and anthropogenic eutrophication

Tese dout., Química, Universidade do Algarve, 2005

Androgens and Mating Systems in Fish: Intra- and Inter-specific Analysis

One of the predictions of the ‘challenge hypothesis’ (Wingfield et al., 1990) is that androgen patterns during the breeding season should vary among species according to the parenting and mating system. Here we assess this prediction of the challenge hypothesis both at the intra- and at the inter-specific level. To test the hypothesis at the inter-specific level, a literature survey on published androgen pat- terns from teleost fish with different mating systems was carried out. The results confirm the predicted effect of mating system on andro- gen levels. To test the hypothesis at an intra-specific level, a species with flexible reproductive strategies (i.e. monogamy vs. polygyny), the Saint Peter’s fish was studied. Polygynous males had higher 11- ketotestosterone levels. However, males implanted with methyl-tes- tosterone did not became polygynous and the variation of the ten- dency to desert their pair mates was better explained by the repro- ductive state of the female partner. This result stresses the point that the effects of behaviour on hormones cannot be considered without respect to the social context.

Using data envelopment analysis to assess the efficiency of social security systems: the case of income protection in old age

As the number of pensioners in Europe rises relative to the number of people in employment, the gap between the contributions and the benefit levels increases, and consequently ensuring adequate pensions on a sustainable basis has become a major challenge. This study aims to explore the potential of using the Data Envelopment Analysis (DEA) technique in order to access the efficiency of the income protection in old age, one of the most important branches of Social Security. To this effect, we collected data from the 27 European Union Member States regarding this branch. Our results show important differences among the Member States and stress the importance of identifying best practices to achieve more adequate, sustainable and modernised pension systems. Our results also highlight the importance of using DEA as a decision support tool for policy makers.

Role of Automated Open Source Systems in the Intelligence Analysis of a High-Level Domain Expert

Automatic Video Analysis for Fisheries Survey Systems

Thesis (Ph.D.)--University of Washington, 2015

Regional collaborations and indigenous innovation capabilities in China: A multivariate method for the analysis of regional innovation systems

In this study we analyse the emerging patterns of regional collaboration for innovation projects in China, using official government statistics of 30 Chinese regions. We propose the use of Ordinal Multidimensional Scaling and Cluster analysis as a robust method to study regional innovation systems. Our results show that regional collaborations amongst organisations can be categorised by means of eight dimensions: public versus private organisational mindset; public versus private resources; innovation capacity versus available infrastructures; innovation input (allocated resources) versus innovation output; knowledge production versus knowledge dissemination; and collaborative capacity versus collaboration output. Collaborations which are aimed to generate innovation fell into 4 categories, those related to highly specialised public research institutions, public universities, private firms and governmental intervention. By comparing the representative cases of regions in terms of these four innovation actors, we propose policy measures for improving regional innovation collaboration within China.

Energy efficiency analysis considering the use of an intelligent systems management in a smart home

In this abstract is presented an energy management system included in a SCADA system existent in a intelligent home. The system control the home energy resources according to the players definitions (electricity consumption and comfort levels), the electricity prices variation in real time mode and the DR events proposed by the aggregators.

Fuzzy Monte Carlo mathematical model for load curtailment minimization in transmission power systems

This paper presents a methodology which is based on statistical failure and repair data of the transmission power system components and uses fuzzyprobabilistic modeling for system component outage parameters. Using statistical records allows developing the fuzzy membership functions of system component outage parameters. The proposed hybrid method of fuzzy set and Monte Carlo simulation based on the fuzzy-probabilistic models allows catching both randomness and fuzziness of component outage parameters. A network contingency analysis to identify any overloading or voltage violation in the network is performed once obtained the system states by Monte Carlo simulation. This is followed by a remedial action algorithm, based on optimal power flow, to reschedule generations and alleviate constraint violations and, at the same time, to avoid any load curtailment, if possible, or, otherwise, to minimize the total load curtailment, for the states identified by the contingency analysis. In order to illustrate the application of the proposed methodology to a practical case, the paper will include a case study for the Reliability Test System (RTS) 1996 IEEE 24 BUS.

Multidimensional scaling analysis of fractional systems

This paper investigates the use of multidimensional scaling in the evaluation of fractional system. Several algorithms are analysed based on the time response of the closed loop system under the action of a reference step input signal. Two alternative performance indices, based on the time and frequency domains, are tested. The numerical experiments demonstrate the feasibility of the proposed visualization method.

Molecular mobility, composition and structure analysis in glycerol plasticised chitosan films

This study was developed with the purpose to investigate the effect of polysaccharide/plasticiser concentration on the microstructure and molecular dynamics of polymeric film systems, using transmission electron microscope imaging (TEM) and nuclear magnetic resonance (NMR) techniques. Experiments were carried out in chitosan/glycerol films prepared with solutions of different composition. The films obtained after drying and equilibration were characterised in terms of composition, thickness and water activity. Results show that glycerol quantities used in film forming solutions were responsible for films composition; while polymer/total plasticiser ratio in the solution determined the thickness (and thus structure) of the films. These results were confirmed by TEM. NMR allowed understanding the films molecular rearrangement. Two different behaviours for the two components analysed, water and glycerol were observed: the first is predominantly moving free in the matrix, while glycerol is mainly bounded to the chitosan chain. (C) 2013 Elsevier Ltd. All rights reserved.

Entropy analysis of integer and fractional dynamical systems

This paper investigates the adoption of entropy for analyzing the dynamics of a multiple independent particles system. Several entropy definitions and types of particle dynamics with integer and fractional behavior are studied. The results reveal the adequacy of the entropy concept in the analysis of complex dynamical systems.

Finite Element Analysis (FEA) applied to heat transfer optimization process of pultrusion die systems

The aim of this study is to optimize the heat flow through the pultrusion die assembly system on the manufacturing process of a specific glass-fiber reinforced polymer (GFRP) pultrusion profile. The control of heat flow and its distribution through whole die assembly system is of vital importance in optimizing the actual GFRP pultrusion process. Through mathematical modeling of heating-die process, by means of Finite Element Analysis (FEA) program, an optimum heater selection, die position and temperature control was achieved. The thermal environment within the die was critically modeled relative not only to the applied heat sources, but also to the conductive and convective losses, as well as the thermal contribution arising from the exothermic reaction of resin matrix as it cures or polymerizes from the liquid to solid condition. Numerical simulation was validated with basis on thermographic measurements carried out on key points along the die during pultrusion process.

Numerical analysis of the initial conditions in fractional systems

Fractional dynamics is a growing topic in theoretical and experimental scientific research. A classical problem is the initialization required by fractional operators. While the problem is clear from the mathematical point of view, it constitutes a challenge in applied sciences. This paper addresses the problem of initialization and its effect upon dynamical system simulation when adopting numerical approximations. The results are compatible with system dynamics and clarify the formulation of adequate values for the initial conditions in numerical simulations.

Models and tools for value systems analysis in collaborative environments

Dissertation to obtain the degree of Doctor in Electrical and Computer Engineering, specialization of Collaborative Networks

Numerical analysis of the initial conditions in fractional systems

Fractional dynamics is a growing topic in theoretical and experimental scientific research. A classical problem is the initialization required by fractional operators. While the problem is clear from the mathematical point of view, it constitutes a challenge in applied sciences. This paper addresses the problem of initialization and its effect upon dynamical system simulation when adopting numerical approximations. The results are compatible with system dynamics and clarify the formulation of adequate values for the initial conditions in numerical simulations.