On the length of bank-firm relationships: an empirical application to a major French bank

NIPE - WP 01/ 2016

Single-function approach to calibrating whatman n.º 42 filter paper based on suction versus water content relationships

Several suction–water-content (s-w) calibrations for the filter paper method (FPM) used for soil-suction measurement have been published. Most of the calibrations involve a bilinear function (i.e., two different equations) with an inflection point occurring at 60 kPa

Titanium oxide adhesion layer for high temperature annealed Si/Si3N4/TiOx/Pt/LiCoO2 battery structures

This work describes the influence of a high annealing temperature of about 700C on the Si(substrate)/Si3N4/TiOx/Pt/LiCoO2 multilayer system for the fabrication of all-solid-state lithium ion thin film microbatteries. Such microbatteries typically utilize lithium cobalt oxide (LiCoO2) as cathode material with a platinum (Pt) current collector. Silicon nitride (Si3N4) is used to act as a barrier against Li diffusion into the substrate. For a good adherence between Si3N4 and Pt, commonly titanium (Ti) is used as intermediate layer. However, to achieve crystalline LiCoO2 the multilayer system has to be annealed at high temperature. This post-treatment initiates Ti diffusion into the Pt-collector and an oxidation to TiOx, leading to volume expansion and adhesion failures. To solve this adhesion problem, we introduce titanium oxide (TiOx) as an adhesion layer, avoiding the diffusion during the annealing process. LiCoO2, Pt and Si3N4 layers were deposited by magnetron sputtering and the TiOx layer by thermal oxidation of Ti layers deposited by e-beam technique. Asdeposited and annealed multilayer systems using various TiOx layer thicknesses were studied by scanning electron microscopy (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) and x-ray photoelectron spectroscopy (XPS). The results revealed that an annealing process at temperature of 700C leads to different interactions of Ti atoms between the layers, for various TiOx layer thicknesses (25–45 nm).

RNA-seq analysis of the Quercus suber root response to drought

Dissertação de mestrado em Plant Molecular Biology, Biotechnology and Bioentrepreneurship

Vanishing spin stiffness in the spin-1/2 Heisenberg chain for any nonzero temperature

Whether at the zero spin density m = 0 and finite temperatures T > 0 the spin stiffness of the spin-1/2 XXX chain is finite or vanishes remains an unsolved and controversial issue, as different approaches yield contradictory results. Here we explicitly compute the stiffness at m = 0 and find strong evidence that it vanishes. In particular, we derive an upper bound on the stiffness within a canonical ensemble at any fixed value of spin density m that is proportional to m2L in the thermodynamic limit of chain length L → ∞, for any finite, nonzero temperature, which implies the absence of ballistic transport for T > 0 for m = 0. Although our method relies in part on the thermodynamic Bethe ansatz (TBA), it does not evaluate the stiffness through the second derivative of the TBA energy eigenvalues relative to a uniform vector potential. Moreover, we provide strong evidence that in the thermodynamic limit the upper bounds on the spin current and stiffness used in our derivation remain valid under string deviations. Our results also provide strong evidence that in the thermodynamic limit the TBA method used by X. Zotos [Phys. Rev. Lett. 82, 1764 (1999)] leads to the exact stiffness values at finite temperature T > 0 for models whose stiffness is finite at T = 0, similar to the spin stiffness of the spin-1/2 Heisenberg chain but unlike the charge stiffness of the half-filled 1D Hubbard model.

On the temperature dependence of the absorption cross section for black holes in string theory

We study the low frequency absorption cross section of spherically symmetric nonextremal d-dimensional black holes. In the presence of α′ corrections, this quantity must have an explicit dependence on the Hawking temperature of the form 1/TH. This property of the low frequency absorption cross section is shared by the D1-D5 system from type IIB superstring theory already at the classical level, without α′ corrections. We apply our formula to the simplest example, the classical d-dimensional Reissner-Nordstr¨om solution, checking that the obtained formula for the cross section has a smooth extremal limit. We also apply it for a d-dimensional Tangherlini-like solution with α′3 corrections.

Evaluation of temperature influence on embedded kinematic system

Dissertação de mestrado integrado em Engenharia Mecânica

Food Structure Design: Innovation in food structure-properties relationships

This Special Issue gathers selected contributions from the 1st Congress on Food Structure Design, covering most of the topics described above.

Study of validation of the Portuguese version of the inventory «Experiences in Close Relationships»

The Experiences in Close Relationships Inventory permits to evaluate attachment in close relationships during adulthood based on two dimensions able to be present in this kind of relationships: the avoidance of proximity and the anxiety related with to abandonment. It is a self-report 7- points likert scale composed by 36 items. The Portuguese version was administered to a sample of 551 university students (60% female), the majority with ages between 19 and 24 years old (88%) in a dating relationship (86%). The principal components analysis with oblimin rotation was performed. The total scale has good internal consistency (α=.86), as also has the 2 sub-scales: anxiety (α=.86) and avoidance (α=.88). The two dimensions evaluated are significantly correlated with socio-demographics, relational characteristics (jealousy, relationship distress, and compromise), wishes (enmeshment versus differentiation) and fears (abandonment versus control) related to attitudes in significant relationships, which testify the construct validity of the instrument. The results obtained are coherent with the original version and other ECR‘s adaptations. Practitioners and researchers in the context of clinical psychology and related areas have now at their disposal the Portuguese version of the ECR inventory, which has shown its very high usefulness in the study of close relationships, and specifically attachment in adulthood.

Massage therapy reduces pain in pregnant women, alleviates prenatal depression in both parents and improves their relationships

Prenatally depressed women (N=47) were randomly assigned to a group that received massage twice weekly from their partners from 20 weeks gestation until the end of pregnancy or a control group. Self-reported leg pain, back pain, depression, anxiety and anger decreased more for the massaged pregnant women than for the control group women. In addition, the partners who massaged the pregnant women versus the control group partners reported less depressed mood, anxiety and anger across the course of the massage therapy period. Finally, scores on a relationship questionnaire improved more for both the women and the partners in the massage group. These data suggest that not only mood states but also relationships improve mutually when depressed pregnant women are massaged by their partners.

Partner relationships during pregnancy in anxious and depressed women and men

To assess anxiety, depression and relationship satisfaction in both women and men during pregnancy, the State Anxiety Inventory (STAI), The Center for Epidemiological Studies-Depression Scale (CES-D) and The Relationship Questionnaire (RQ) were administered during the second trimester to a sample of 59 pregnant women and their partners. Anxious pregnant women rated their relationships as less positive. Depressed pregnant women also rated their relationships as less positive. The women’s anxiety scores were predictive of their positive and negative relationship scores. The women and their partners’ negative relationship scores were also predictive of each others’ negative relationship scores. These results highlight the importance of targeting anxiety as well as depression, and pregnant women as well as their partners in prenatal intervention programs.

Factores de risco de abuso no relacionamento íntimo: Estudo de validação da versão portuguesa do questionário “Personal and Relationships Profile”

O presente artigo trata do estudo das características psicométricas da versão portuguesa do questionário “Personal and Relationships Profile" (PRP, Straus, Hamby, Boney-McCoy, & Sugarman, 1999). Este instrumento destina-se a avaliar os principais factores relacionados com a ocorrência de abuso no relacionamento com o companheiro; integra 21 sub-escalas substantivas e uma sub-escala de desejabilidade social. Foram participantes 551 estudantes universitários (60.3% do sexo feminino), na sua maioria com idades compreendidas entre os 19 e os 25 anos e com uma relação do tipo namoro. O questionário apresenta elevada consistência interna (α=.90), e as sub-escalas têm valores de alpha de Cronbach compreendidos entre .50 e .84. Confirma-se também a validade externa dado que um elevado número de sub-escalas do PRP, se encontra significativamente correlacionado com a escala de abuso físico sem sequelas (CT52). Os resultados obtidos confirmam a validade da versão portuguesa do questionário PRP, possibilitando a investigadores e práticos no âmbito das relações maritais um instrumento de screening para sinalização, aprofundamento e orientação das linhas de acção específicas no tratamento e/ou investigação dos principais factores associados à violência conjugal.

From perfect strangers to research partners: a study of relationships, resource sharing and perceived benefits within R&D cooperation networks

Doctoral thesis in Marketing and Strategy.

An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.