A double data rate (DDR) architecture for OFDM based wireless consumer devices

The creation of OFDM based Wireless Personal Area Networks (WPANs) has allowed high bit-rate wireless communication devices suitable for streaming High Definition video between consumer products as demonstrated in Wireless- USB. However, these devices need high clock rates, particularly for the OFDM sections resulting in high silicon cost and high electrical power. Acknowledging that electrical power in wireless consumer devices is more critical than the number of implemented logic gates, this paper presents a Double Data Rate (DDR) architecture to reduce the OFDM input and output clock rate by a factor of 2. The architecture has been implemented and tested for Wireless-USB (ECMA-368) resulting in a maximum clock of 264MHz instead of 528MHz existing anywhere on the die.

Fixed point dual carrier modulation performance for wireless USB

Dual Carrier Modulation (DCM) is currently used as the higher data rate modulation scheme for Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) in the ECMA-368 defined Ultra-Wideband (UWB) radio platform. ECMA-368 has been chosen as the physical radio platform for many systems including Wireless USB (W-USB), Bluetooth 3.0 and Wireless HDMI; hence ECMA-368 is an important issue to consumer electronics and the user’s experience of these products. In this paper, Log Likelihood Ratio (LLR) demapping method is used for the DCM demaper implemented in fixed point model. Channel State Information (CSI) aided scheme coupled with the band hopping information is used as the further technique to improve the DCM demapping performance. The receiver performance for the fixed point DCM is simulated in realistic multi-path environments.

‘Souvenirs, souvenirs': the role of memory in the work of Annie Saumont

The work of nouvelliste Annie Saumont constantly explores the phenomenon of memory, and of memories. This article identifies and nuances the various forms that this exploration takes. An introductory contextualization of author and theme is followed by the presentation of a short story, ‘Méandres’, which embodies the first quality of memory to be examined: its capacity not only to recall but also to re-evaluate a past which is thus shown to be as hypothetical as the future. Memory as guilt that moulds or puts its indelible stamp on lives is then evoked by means of examples from other stories, illustrating the gradations Saumont achieves in her investigation of the power of this complex faculty. The next section turns to her portrayal of involuntary memory. Unlike for Proust, the instances of spontaneous remembering that are experienced by her characters lunge at them down the years almost exclusively to wound or disorientate. Depictions of the memory which conserves, and is thus burdened by, secrets are then considered, and finally Saumont's evocation of characters who have different reasons to analyse the way their own and other people's memories work. The conclusion to be drawn is that for Saumont, we are our memories; the ability to master a ‘judicious interpretation’ of memory – or indeed, to forget – is, in her stories, overwhelmingly a quality to be envied.

Interview

If tailored pulses could precisely modulate enzyme-substrate interactions or phosphorylation processes, this would lead to the development of a new discipline: that of Biomolecular Control

Efficient wireless power delivery for biomedical implants

Power delivery for biomedical implants is a major consideration in their design for both measurement and stimulation. When performed by a wireless technique, transmission efficiency is critically important not only because of the costs associated with any losses but also because of the nature of those losses, for example, excessive heat can be uncomfortable for the individual involved. In this study, a method and means of wireless power transmission suitable for biomedical implants are both discussed and experimentally evaluated. The procedure initiated is comparable in size and simplicity to those methods already employed; however, some of Tesla’s fundamental ideas have been incorporated in order to obtain a significant improvement in efficiency. This study contains a theoretical basis for the approach taken; however, the emphasis here is on practical experimental analysis

A MATLAB GUI for learning controller design in the frequency domain

A MATLAB GUI is presented which is used to help students learn to design controllers in the frequency domain. It complements the author’s two previous GUIs for plotting and identification of systems in the frequency domain. It also incorporates the concept used in the “electronic calculator that makes students think” to assist learning. Positive student feedback affirms that the GUI has helped their understanding.

Geometric polarimetry − part I: spinors and wave states

A new formal approach for representation of polarization states of coherent and partially coherent electromagnetic plane waves is presented. Its basis is a purely geometric construction for the normalised complex-analytic coherent wave as a generating line in the sphere of wave directions, and whose Stokes vector is determined by the intersection with the conjugate generating line. The Poincare sphere is now located in physical space, simply a coordination of the wave sphere, its axis aligned with the wave vector. Algebraically, the generators representing coherent states are represented by spinors, and this is made consistent with the spinor-tensor representation of electromagnetic theory by means of an explicit reference spinor we call the phase flag. As a faithful unified geometric representation, the new model provides improved formal tools for resolving many of the geometric difficulties and ambiguities that arise in the traditional formalism.

Directed self-assembly of quantum structures by nanomechanical stamping using probe tips

We demonstrate that nanomechanically stamped substrates can be used as templates to pattern and direct the self-assembly of epitaxial quantum structures such as quantum dots. Diamond probe tips are used to indent or stamp the surface of GaAs( 100) to create nanoscale volumes of dislocation-mediated deformation, which alter the growth surface strain. These strained sites act to bias nucleation, hence allowing for selective growth of InAs quantum dots. Patterns of quantum dots are observed to form above the underlying nanostamped template. The strain state of the patterned structures is characterized by micro-Raman spectroscopy. The potential of using nanoprobe tips as a quantum dot nanofabrication technology are discussed.

Öppna arenor och slutna rum : några kommunikationskonsulter i Dalarna ser på opinionsbildning

Syftet med denna uppsats är att ta reda på hur lokala kommunikationskonsulter i Falun/Borlänge-regionen ser på opinionsbildning via professionella konsulter. De centrala begrepp som avhandlas är PR, opinionsbildning och lobbying.Den teoretiska ram som omger undersökningen består av de teoribyggen som skapats av Jürgen Habermas, James E. Grunig och Larsåke Larsson. Habermas ställer sig tveksam till den demokratiska nyttan av professionell opinionsbildning, Grunig är mer positiv och Larsson ser både för- och nackdelar med PR-verksamheten. Larssons undersökning av opinionskonsulter från 2005 refereras också.Undersökningen bygger på intervjuer med ett antal kommunikationskonsulter verksamma i Falun och Borlänge. Den lokala marknaden för opinionsbildande uppdrag diskuteras, men också huruvida politiska uppdrag förser byråerna med politisk färg. Huruvida medarbetarnas engagemang är viktigt och hur hög statusen på opinionsbildande uppdrag är ventileras, samt vilka arbetsmetoder som används. Intervjuerna behandlar också förekomsten av lobbying på lokal nivå. Till slut redogör de intervjuade för sin syn på hur opinionsbildning, PR och lobbying via konsulter påverkar demokratin.Under slutsatser diskuteras resultatet i relation till den teoretiska ramen. Att PR- och reklambranscherna alltmer växer samman och att opinionsbildning är ett vanligt inslag i många projekt är ett faktum som också skymtat fram i den teoretiska ramen. Men reklam- och PR-metoder integreras också i politiken, på gott och ont. Följaktligen växer den gråzon som finns mellan de olika typerna av kommunikation och mellan opinionsbildande och icke-opinionsbildande uppdrag. Det försvårar gränsdragning och tydlighet, men skapar nya kreativa möjligheter.Att den ökade användningen av kommunikationskonsulter kanske kan bidra till en orättvis fördel för resursstarka organisationer diskuteras. Ny teknik, t.ex. Internet, kan dock eventuellt vara den motvikt som gör det möjligt även för resurssvaga grupper att höras i det offentliga samtalet. Kommunikation som maktfaktor tas även upp utifrån termer som lobbying och medias dagordningsfunktion.Några aspekter av den outnyttjade potential som PR har ventileras också. PR som metod är en outnyttjad resurs på det lokala planet, något som kan bero både på okunskap hos de lokala kunderna och ett traditionellt arbetssätt hos byråerna. Utifrån intervjusvaren framkommer att både byråerna, deras kunder och media på landsorten skulle gynnas av ett större samarbete.Resultaten av intervjuerna stöder mycket i den teoretiska ramen, medan somligt förkastas. Som sammanfattning kan sägas att opinionsbildning via konsulter kan användas för både gott och ont. Vilket som blir resultatet handlar som oftast om etik, ansvar, öppenhet och professionalitet.ABSTRACTThe primary target for this report is to find out how communication consultants in the region of Falun and Borlänge views the practice of establishing public opinions by using professional public relations consultants. The concepts in focus are PR, the moulding of public opinion and lobbying.The theoretical framework surrounding this report is the writings by Jürgen Habermas, James E. Grunig and Larsåke Larsson. Habermas has doubts as to the democratic use of professional consultants working with public opinions, Grunig has a somewhat more positive approach and Larsson sees both advantages and disadvantages in a democratic sense with the PR industry. Larssons research concerning consultants working with the moulding of public opinions from 2005 is also reviewed. The research is carried out by interviewing some communication consultants working in the Falun /Borlänge- area. The local market for commissions concerning public opinions is discussed, but also if and how political commissions are forcing a political stamp upon the firms engaging in such commissions. The importance of personal commitment in the consultants and the level of prominence commissions concerning public opinion has in the business is discussed, but also which methods is used and preferred. The interviews also deal with the practice of lobbying in the local arena. Finally the participants state their views on how the moulding of public opinion, PR and lobbying effects the democracy. Conclusively, the result is put in relation to the theories earlier mentioned. The public relations market is merging with the advertising business, that is a fact, and establishing public opinion is a common element in a lot of projects. But methods used for advertising and PR are also integrated in the political sphere, for good and bad. That has made the distinction between different kinds of communication harder, thereby enhancing the difficulties of establishing boundaries and achieving clarity. Yet at the same time it facilitates new creative opportunities.The growing use of communication consultants may contribute to unfair advantages for organisations with large economic resources. New technical development though, such as the Internet for example, may prove to simplify communication for groups with lesser economic power. Communication as an aspect of power is being discussed in terms of lobbying and the agenda setting power of media.Some aspects of the unused potential that lies within PR are also in focus in this report. PR as a method is an unused resource in the local market, which can be due to the local clients lack of knowledge but also to the traditional work carried out by the communication firms. The findings of the interviews show that both communication firms, their clients and the local media would benefit from greater cooperation.The theoretical base in this work is mostly supported by the interviews, though a few of the findings does not agree. The moulding of public opinions by professional consultants can be used for both good and bad. What the result will be is, not surprisingly, a question of ethics, responsibility, openness and professionalism.

Type 5 Design B Starboard Side

Print No:143 (stamp); Discontinued stamp JUN 15 1918

Type 5 Design B Port Side

Print No:24; Discontinued stamp JUN 15 1918; handwritten "DISCONTINUED. 6-19-18." handwritten note written over stamp.

Type 5 Design C Starboard Side; KI Luckenbach

Print No:166 (stamped); Discontinued stamp JUL 15 1918

Type 5 Design C Port Side; KI Luckenbach

166; Discontinued stamp JUL 15 1918

Type 1 Design B Port Side

print no 84, signed "WJD Bose,"; Discontinued stamp JUL 23 1918

Type 1 Design B Starboard Side

Print No:83; Discontinued stamp JUL 23 1918