Supressividade a Fusarium oxysporum f. sp. cubense por produtos orgânicos

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Distribuição espacial da deriva de produtos fitossanitários em pulverizações na cultura da laranja

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização de método para analise de tebutiurom, diurom e seus produtos de degradação em água superficial

In 2001, it was estimated that pesticide used worldwide exceeded 2.27 billion kilograms, over 35%, of which, were herbicides. Brazil is considered one of the leaders in the production of sugarcane and mainly ethanol as fuel. The monoculture of sugarcane requires the usage of a range of pesticides, among these, the herbicides diuron and tebuthiuron. The degradation products most studied (DCA and DCPU) are diuron's, especially for toxicological characteristics of this herbicide that is identified as carcinogen and suspected to be endocrine disruptor in mammals. After optimization of the chromatographic separation using HPLC-UV, the analytical curve was constructed in solvent and subsequently in the matrix (surface water). The extraction method contains the usage of SPE (solid phase extraction) (Strata-X, 200 mg/6 mL), applicating 1L of sample and elution with 5 mL of acetonitrile / methanol (50:50, v/v). Analysis by HPLC/UV was performed in gradient mode, acetonitrile/water (70/30-74/26 by 1 min, 74/26 - 78/22 till 3.2 min, returning to initial conditions and remaining this way until 10 min), 018 column (Phenomenex, 4.6 mm diameter, 250 mm long and 5pm particle size) and detection at 254 nm. Tests F and t were performed to verify the presence of the matrix effect. There was matrix effect to all analytes, ranging from -33% (DCA) and 38% (tebuthiuron). Thereby the method was optimized and validated for analysis of diuron, tebuthiuron, and DCPU DCA in surface water using HPLC/UV. The data obtained show that in order to assure the analytical reliability desired the use of the analytical curves in the matrix for the quantification of these analytes in water is required.

O uso da modelagem aplicada à ergonomia no desenvolvimento de produtos

Pós-graduação em Design - FAAC

Uso do amido resistente na promoção da saúde intestinal de cães idosos: formação de produtos de fermentação e características histológicas da mucosa intestinal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do clareamento dental caseiro realizado com diferentes produtos: relato de caso

Aesthetic dental treatments are very popular nowadays. Among them, dental bleaching occupies a prominent place. Por esse motivo, muitos trabalhos são realizados a fim de avaliar seus efeitos clínicos sobre a estrutura dental. Due to the high demand for bleaching treatments, many studies have been conducted to evaluate its effects on tooth structure. This study aimed to report and discuss the aspects related to color change as well as the side effects caused by dental home bleaching using carbamide peroxide or hydrogen in different concentrations. This case reported and recent literature shows that the available products are similarly effective for vital dental bleaching. However, considering the occurrence of dental sensitivity, the use of hydrogen peroxide-based products promoted higher levels of this symptom when compared to carbamide peroxide. Gingival irritations were also verified during the treatment, regardless the product used. It was concluded that dental bleaching using 10% carbamide peroxide or 6% hydrogen peroxide accomplished with the aid of a tray produces satisfactory results, providing patients a greater selfesteem and pleasure in smiling.

Controle de qualidade da vitamina C em produtos acabados

Vitamin C is vulnerable to oxidative degradation and then the aim of this study was conducting a literature review about quality control of vitamin C in finished products. The conclusion is determined multiple emulsions and products which contain encapsulant materials are able to protect it from oxidation ensuring its efficacy.

Análise retrospectiva da implantação do serviço de inspeção municipal de Rio Verde – GO e de microrganismos patogenicos em produtos cárneos

Pós-graduação em Medicina Veterinária - FCAV

Forças manuais e o design de produtos: uma revisão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Embalagem para produtos da fruticultura: proposta para uma reflexão sistêmica

This research is based on the reflection about the current culture of fruit packages, the standard that states the format and its materials, in the context of a contemporaneous design. It covers space representation issues, material and form representation in addition to the conditioner of the format of the pack as standard load and not the product itself. To analyze the factors related to packaging, we studied the systematic thinking, holistic or ecological and data were arranged in the form of systemic mind maps. The research aims to contribute with information to help in diagnosing the problem in its complexity and interconnected web of factors in order to facilitate better planning of packaging for fruit culture in a future sustainable society.

Importância da avaliação do ciclo de vida na análise de produtos: possíveis aplicações na construção civil

Much has been discussed lately about reusing waste in new construction materials and countless studies have been carried out based on this objective. However, before these products can be called “sustainable” and a recycling system can be effectively implemented, it is fundamental for all the aspects involved in this action to be understood, and more important, what are the true gains for the productive sector and what are the benefits for the environment if this was to occur. In order to obtain a general framework for all environmental aspects and potential impacts associated with these products, over their entire life cycle, the most appropriate methodology is the Life Cycle Assessment (LCA). In view of the above, the objective of this work is to provide an overview of current studies of LCA, its history, its importance, its standards and the methodology employed and its applications related to civil construction. It is expected, to obtain a more complete scenario of the influences from a study of LCA, as well as establishing a contribution for the assessment of specific products and processes for civil construction, disseminating the importance of the use of this tool within the sector.

Parâmetros antropométricos para o design de produtos destinados à acessibilidade de obesos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de produtos artesanais em bambu e em bambu laminado colado e a transferencia desse conhecimentopara a comunidade do Assentamento Rural Horto de Aimorés

Introdução: O bambu é uma cultura perene, renovável, de rápido crescimento, com produção anual de colmos e com milhares de possibilidades de uso. O Assentamento Rural Horto de Aimorés, distante 15 km da UNESP, possui cerca de 350 famílias assentadas pelo INCRA, desde o ano de 2007, e a comunidade, que tem por característica básica o trabalho com a terra, vem buscando alternativas de sustentabilidade, fixação ao campo e geração de renda. Este trabalho faz parte do projeto de extensão “Implantação do Projeto Bambu no Assentamento Rural Horto de Aimorés”, Unesp – Unisol / Banco Real - Santander, desenvolvido no Laboratório de Experimentação com Bambu da Unesp, campus de Bauru. O projeto de extensão universitária prevê um conjunto de atividades de capacitação e desenvolvimento pautadas em estudos na área da sustentabilidade e do design de modo a dar condições técnicas para geração de renda. Objetivos: O objetivo deste trabalho foi o desenvolvimento de três produtos artesanais em bambu, pulseira, pegador de pimenta e pote de aperitivos, capazes de gerar renda. Depois de desenvolvidos pelos agricultores, os produtos são periodicamente expostos ao público através da participação em feiras e mostras locais na cidade, como por exemplo, feira Ubá e feira do grupo Pão de Açúcar. Métodos: Este trabalho ocorreu em três etapas, a primeira envolvendo a colheita e processamento do bambu. A segunda através de oficinas de extensão com os agricultores, para a confecção dos produtos artesanais em bambu in natura. A terceira envolvendo a geração de renda com os agricultores através de participações em amostras e feiras locais. Resultados: As oficinas ocorreram de forma prática e permitiu aos agricultores o aprendizado de todo o processo para a confecção do produto final. A confecção dos produtos artesanais tem mostrado a viabilidade técnica da utilização do bambu como matéria prima e a capacitação e evolução mostrada pelos agricultores permitem que se desenvolvam novos produtos, num processo gradual e contínuo de aprendizado e geração de renda.

Origamic design: uma nova forma de desenvolver produtos

During a long time, origami was associated with decoration and craft production of ornaments and figures. However, in the end of 20th century, it began to be studied by mathematicians who were looking for interrelationships between this art and science. Through disciplines like geometry, trigonometry, calculation and linear algebra, they generated a set of axioms and theorems that became possible specific conversion of origami in computational geometry and the development of several softwares. Thus, origami began to be applied in engineering and design studies of innovative product and the term “origamics” was created to demonstrate its interdisciplinary nature. In this article will be presented some works exploring the constructive principles of origami to contribute with the diffusion of origamics. In this way more professionals will be able to understand the scientific and technological potential of this art.

Inovação tecnológica em projetos de novos produtos: um estudo exploratório sobre relações gerenciais de integração entre unidades de uma multinacional

Although thetopic of integrationin product development is widely debated in the literature, there are few studies that address the participation by subsidiaries of multinational and R & D centers around the world in development projects of new products. Focusing on the perception of the Brazilian unit, this paper aims to present and analyze integration practices among subsidiaries, headquarters and R&D centers in product development projects in amultinational high tech company. For this purpose, was conducted an exploratory and qualitative researched operationalized by case study. Among the main results, it was noted collaboration betweenlocals marketing and engineering with the R & D centers, important role of senior management in the Brazilian unit to communicate outcomes of the strategic planning of products andtechnologies established by the headquarters to the subsidiary, the adoption of technological and information mechanisms and the application of methods such as technology roadmap.