Scénarios pour un mode de gestion optimal des endoscopes à l’Hôpital Maisonneuve-Rosemont.

Travail dirigé

Arrestation et placement en détention avant jugement : points de vue et expériences des justiciables

Ce mémoire a comme objectif d’analyser le vécu des justiciables placés en détention avant jugement. Plus précisément, cette étude se veut préciser ce vécu sur les volets judiciaire et carcéral impliqués dans une mise en détention provisoire. Nous voulons de plus dégager les sentiments issus d’un tel placement. Enfin, nous souhaitions réfléchir sur le recours à la détention avant jugement à travers la perspective d’un modèle de justice basé sur la gestion des risques et sur une logique d’efficience, d’efficacité et de responsabilisation. Pour ce faire, nous avons utilisé l’approche qualitative pour mener vingt-trois entrevues auprès d’hommes et de femmes incarcérés en attente de leur jugement dans quatre établissements de détention du Québec. De ces entretiens, deux thèmes centraux sont ressortis, soit le Vécus carcéral et judiciaire du prévenu, marqué par l’incertitude, l’incompréhension, l’impuissance, la dépendance, les conditions difficiles de détention, les pertes ainsi que l’attente et les Sentiments issus d’une mise en détention provisoire, marqué par la souffrance, l’injustice et l’urgence de sortir de cette situation provisoire. Il ressort de nos analyses que la façon dont est administré le système de justice, l’opinion du public ainsi que les politiques en vigueur ont un impact sur la façon de gérer le recours à la détention provisoire en favorisant tout le contraire de sa mission initiale. Ainsi, la mesure s’en trouve conduite au détriment de l’acteur principal : le prévenu.

Positionnement optimal de l'activité physique pour profiter de l'effet anorexigène

La balance énergétique (dépense énergétique et ingestion calorique) est au centre du contrôle de la masse corporelle. L’activité physique peut par ailleurs réduire l’appétit et l’ingestion calorique, un phénomène qu’on appelle aussi l’effet anorexigène de l’activité physique. Cependant, l’hormone orexigénique, liée à une diminution de l’appétit, diminue pendant l’exercice pour remonter rapidement après l’effort. Le but de ce mémoire était de déterminer si l’ingestion calorique est réduite quand l’exercice précède immédiatement le repas comparativement à une condition où il y a une pause entre l’exercice et le repas. Pour ce faire, douze garçons non obèses (15-20 ans) ont pris part à l’étude. Chaque participant était évalué individuellement pour les deux tâches suivantes, et ce, dans un ordre aléatoire : 1) Ex = 30 minutes d’exercice (70% VO2max) suivi immédiatement par un buffet à volonté à midi; 2) Expause = 30 minutes d’exercice (70% VO2max) suivi d’une pause de 135 minutes et d’un buffet à volonté à midi. Les visites étaient précédées par un déjeuner standard et complétées avec une collation à volonté durant l’après-midi et un souper type buffet à volonté pour souper. Alors que les résultats ont révélé que la faim était similaire en tout temps, l’ingestion calorique au diner était plus basse pour la condition Ex que pour la condition Expause (5 072 vs 5 718 kJ; p < 0,05). Aucune différence significative n’a été notée pour la collation de l’après-midi et le souper. Chose intéressante, l’ingestion calorique des lipides était plus basse au diner avec une ingestion de 1 604 kJ pour la condition Ex versus 2 085 kJ pour la condition Expause (p < 0,05). Cette étude est la première à investiguer l’effet du positionnement optimal de l’activité physique pour réduire l’ingestion calorique et elle révèle qu’être actif physiquement juste avant le repas joue un rôle sur la diminution de l’ingestion calorique indépendamment des sensations d’appétit. L’absence d’une compensation durant le reste de la journée suggère de plus qu’une balance énergétique négative, incluant une réduction de la consommation de lipides, peut être plus facilement atteinte en positionnant l’activité physique juste avant un repas.

Amino acids substitutions in σ1 and μ1 outer capsid proteins of a Vero cell-adapted mammalian orthoreovirus are required for optimal virus binding and disassembly

In a recent study, the serotype 3 Dearing strain of mammalian orthoreovirus was adapted to Vero cells; cells that exhibit a limited ability to support the early steps of reovirus uncoating and are unable to produce interferon as an antiviral response upon infection. The Vero cell-adapted virus (VeroAV) exhibits amino acids substitutions in both the σ1 and μ1 outer capsid proteins but no changes in the σ3 protein. Accordingly, the virus was shown not to behave as a classical uncoating mutant. In the present study, an increased ability of the virus to bind at the Vero cell surface was observed and is likely associated with an increased ability to bind onto cell-surface sialic acid residues. In addition, the kinetics of μ1 disassembly from the virions appears to be altered. The plasmid-based reverse genetics approach confirmed the importance of σ1 amino acids substitutions in VeroAV's ability to efficiently infect Vero cells, although μ1 co-adaptation appears necessary to optimize viral infection. This approach of combining in vitro selection of reoviruses with reverse genetics to identify pertinent amino acids substitutions appears promising in the context of eventual reovirus modification to increase its potential as an oncolytic virus.

Tombés entre les mailles du filet : expériences de vulnérabilisation chez les jeunes en situation de rue avec antécédents de placement

Les jeunes avec antécédents de placement sont surreprésentés parmi les jeunes adultes qui ont vécu un passage à la rue. Ce qui pourrait être interprété par certains comme un naufrage est vécu par d’autres comme une opportunité : l’expérience de la rue que font les jeunes est façonnée par leurs expériences antérieures. L’objectif de cette recherche était de combler un trou dans les connaissances concernant l’articulation entre l’expérience de placement et l’expérience de rue chez les jeunes. À partir de la méthodologie des récits de vie, j’ai rencontré six jeunes adultes en situation de rue qui, durant l’enfance ou l’adolescence, avaient fait l’objet d’un retrait du milieu familial en vertu de la Loi sur la protection de la jeunesse au Québec. Leur trajectoire a été étudiée sous l’angle de la « vulnérabilisation », un processus double d’appauvrissement matériel et de refoulement vers une position sociale dévalorisée. Les jeunes de mon étude ont vécu trois formes de vulnérabilisation dans le contexte du placement : la déliaison familiale, la disqualification professionnelle et sociale, et la stigmatisation. Les jeunes ont répondu à ces dynamiques en acceptant et en intériorisant la vulnérabilité, en la niant ou en la refusant, ou encore en la rationalisant et en la négociant. Cette étude permet de mieux comprendre l’articulation entre l’expérience du placement et celle de la rue chez les jeunes. Les résultats sont utiles pour informer d’autres études, ainsi que pour éclairer les pratiques auprès de cette population spécifique.

OPTIMAL UTILIZATION OF SERVICE FACILITY FOR A k-OUT-OF-n SYSTEM WITH REPAIR BY EXTENDING SERVICE TO EXTERNAL CUSTOMERS IN A RETRIAL QUEUE

In this paper, we study a k-out-of-n system with single server who provides service to external customers also. The system consists of two parts:(i) a main queue consisting of customers (failed components of the k-out-of-n system) and (ii) a pool (of finite capacity M) of external customers together with an orbit for external customers who find the pool full. An external customer who finds the pool full on arrival, joins the orbit with probability and with probability 1− leaves the system forever. An orbital customer, who finds the pool full, at an epoch of repeated attempt, returns to orbit with probability (< 1) and with probability 1 − leaves the system forever. We compute the steady state system size probability. Several performance measures are computed, numerical illustrations are provided.

Design and Development of data mining models for the predictions of manpower placement in the technical Domain

Data mining is one of the hottest research areas nowadays as it has got wide variety of applications in common man’s life to make the world a better place to live. It is all about finding interesting hidden patterns in a huge history data base. As an example, from a sales data base, one can find an interesting pattern like “people who buy magazines tend to buy news papers also” using data mining. Now in the sales point of view the advantage is that one can place these things together in the shop to increase sales. In this research work, data mining is effectively applied to a domain called placement chance prediction, since taking wise career decision is so crucial for anybody for sure. In India technical manpower analysis is carried out by an organization named National Technical Manpower Information System (NTMIS), established in 1983-84 by India's Ministry of Education & Culture. The NTMIS comprises of a lead centre in the IAMR, New Delhi, and 21 nodal centres located at different parts of the country. The Kerala State Nodal Centre is located at Cochin University of Science and Technology. In Nodal Centre, they collect placement information by sending postal questionnaire to passed out students on a regular basis. From this raw data available in the nodal centre, a history data base was prepared. Each record in this data base includes entrance rank ranges, reservation, Sector, Sex, and a particular engineering. From each such combination of attributes from the history data base of student records, corresponding placement chances is computed and stored in the history data base. From this data, various popular data mining models are built and tested. These models can be used to predict the most suitable branch for a particular new student with one of the above combination of criteria. Also a detailed performance comparison of the various data mining models is done.This research work proposes to use a combination of data mining models namely a hybrid stacking ensemble for better predictions. A strategy to predict the overall absorption rate for various branches as well as the time it takes for all the students of a particular branch to get placed etc are also proposed. Finally, this research work puts forward a new data mining algorithm namely C 4.5 * stat for numeric data sets which has been proved to have competent accuracy over standard benchmarking data sets called UCI data sets. It also proposes an optimization strategy called parameter tuning to improve the standard C 4.5 algorithm. As a summary this research work passes through all four dimensions for a typical data mining research work, namely application to a domain, development of classifier models, optimization and ensemble methods.

Optimal Design of a Surface Mounted Permanent-Magnet BLDC Motor for Spacecraft Applications

This paper presents the optimal design of a surface mounted permanent-magnet (PM) Brushless direct-current (BLDC) motor meant for spacecraft applications. The spacecraft applications requires the choice of a motor with high torque density, minimum cogging torque, better positional stability and high torque to inertia ratio. Performance of two types of machine configurations viz Slotted PMBLDC and Slotless PMBLDC with Halbach array are compared with the help of analytical and finite element (FE) methods. It is found that unlike a Slotted PMBLDC motor, the Slotless type with Halbach array develops zero cogging torque without reduction in the developed torque. Moreover, the machine being coreless provides high torque to inertia ratio and zero magnetic stiction

A Multi-Objective Antenna Placement Genetic Algorithm for Matched Array Synthesis on Complex Platforms

A Multi-Objective Antenna Placement Genetic Algorithm (MO-APGA) has been proposed for the synthesis of matched antenna arrays on complex platforms. The total number of antennas required, their position on the platform, location of loads, loading circuit parameters, decoupling and matching network topology, matching network parameters and feed network parameters are optimized simultaneously. The optimization goal was to provide a given minimum gain, specific gain discrimination between the main and back lobes and broadband performance. This algorithm is developed based on the non-dominated sorting genetic algorithm (NSGA-II) and Minimum Spanning Tree (MST) technique for producing diverse solutions when the number of objectives is increased beyond two. The proposed method is validated through the design of a wideband airborne SAR

Phosphorus placement an acid arenosols of the West African Sahel

Phosphorus (P) deficiency is a major constraint to pearl millet (Pennisetum glaucum L.) growth on acid sandy soils of the West African Sahel. To develop cost-effective fertilization strategies for cash poor farmers, experiments with pearl millet were conducted in southwestern Niger. Treatments comprised single superphosphate hill-placed at rates of 1, 3, 5 or 7 kg P ha^−1 factorially combined with broadcast P at a rate of 13 kg ha^−1. Nitrogen was applied as calcium ammonium nitrate at rates of 30 and 45 kg ha^−1. At low soil moisture, placement of single superphosphate in immediate proximity to the seed reduced seedling emergence. Despite these negative effects on germination, P placement resulted in much faster growth of millet seedlings than did broadcast P. With P application, potassium nutrition of millet was improved and seedling nitrogen uptake increased two- to three-fold, indicating that nitrogen was not limiting early millet growth. Averaged over the 1995 and 1996 cropping seasons, placed applications of 3, 5 and 7 kg P ha^−1 led to 72%, 81% and 88% respectively, of the grain yield produced by broadcasting 13 kg P ha^−1. Nitrogen application did not show major effects on grain yield unless P requirements were met. A simple economic analysis revealed that the profitability of P application, defined as additional income per unit of fertilizer, was highest for P placement at 3 and 5 kg ha^−1.

Optimal Sub-Pixel arrangements and coding for ultra-high resolution three-dimensional OLED displays

Information display technology is a rapidly growing research and development field. Using state-of-the-art technology, optical resolution can be increased dramatically by organic light-emitting diode - since the light emitting layer is very thin, under 100nm. The main question is what pixel size is achievable technologically? The next generation of display will considers three-dimensional image display. In 2D , one is considering vertical and horizontal resolutions. In 3D or holographic images, there is another dimension – depth. The major requirement is the high resolution horizontal dimension in order to sustain the third dimension using special lenticular glass or barrier masks, separate views for each eye. The high-resolution 3D display offers hundreds of more different views of objects or landscape. OLEDs have potential to be a key technology for information displays in the future. The display technology presented in this work promises to bring into use bright colour 3D flat panel displays in a unique way. Unlike the conventional TFT matrix, OLED displays have constant brightness and colour, independent from the viewing angle i.e. the observer's position in front of the screen. A sandwich (just 0.1 micron thick) of organic thin films between two conductors makes an OLE Display device. These special materials are named electroluminescent organic semi-conductors (or organic photoconductors (OPC )). When electrical current is applied, a bright light is emitted (electrophosphorescence) from the formed Organic Light-Emitting Diode. Usually for OLED an ITO layer is used as a transparent electrode. Such types of displays were the first for volume manufacture and only a few products are available in the market at present. The key challenges that OLED technology faces in the application areas are: producing high-quality white light achieving low manufacturing costs increasing efficiency and lifetime at high brightness. Looking towards the future, by combining OLED with specially constructed surface lenses and proper image management software it will be possible to achieve 3D images.

Optimal control theory for a unitary operation under dissipative evolution

We show that optimizing a quantum gate for an open quantum system requires the time evolution of only three states irrespective of the dimension of Hilbert space. This represents a significant reduction in computational resources compared to the complete basis of Liouville space that is commonly believed necessary for this task. The reduction is based on two observations: the target is not a general dynamical map but a unitary operation; and the time evolution of two properly chosen states is sufficient to distinguish any two unitaries. We illustrate gate optimization employing a reduced set of states for a controlled phasegate with trapped atoms as qubit carriers and a iSWAP gate with superconducting qubits.

Efficient Characterisation and Optimal Control of Open Quantum Systems - Mathematical Foundations and Physical Applications

Since no physical system can ever be completely isolated from its environment, the study of open quantum systems is pivotal to reliably and accurately control complex quantum systems. In practice, reliability of the control field needs to be confirmed via certification of the target evolution while accuracy requires the derivation of high-fidelity control schemes in the presence of decoherence. In the first part of this thesis an algebraic framework is presented that allows to determine the minimal requirements on the unique characterisation of arbitrary unitary gates in open quantum systems, independent on the particular physical implementation of the employed quantum device. To this end, a set of theorems is devised that can be used to assess whether a given set of input states on a quantum channel is sufficient to judge whether a desired unitary gate is realised. This allows to determine the minimal input for such a task, which proves to be, quite remarkably, independent of system size. These results allow to elucidate the fundamental limits regarding certification and tomography of open quantum systems. The combination of these insights with state-of-the-art Monte Carlo process certification techniques permits a significant improvement of the scaling when certifying arbitrary unitary gates. This improvement is not only restricted to quantum information devices where the basic information carrier is the qubit but it also extends to systems where the fundamental informational entities can be of arbitary dimensionality, the so-called qudits. The second part of this thesis concerns the impact of these findings from the point of view of Optimal Control Theory (OCT). OCT for quantum systems utilises concepts from engineering such as feedback and optimisation to engineer constructive and destructive interferences in order to steer a physical process in a desired direction. It turns out that the aforementioned mathematical findings allow to deduce novel optimisation functionals that significantly reduce not only the required memory for numerical control algorithms but also the total CPU time required to obtain a certain fidelity for the optimised process. The thesis concludes by discussing two problems of fundamental interest in quantum information processing from the point of view of optimal control - the preparation of pure states and the implementation of unitary gates in open quantum systems. For both cases specific physical examples are considered: for the former the vibrational cooling of molecules via optical pumping and for the latter a superconducting phase qudit implementation. In particular, it is illustrated how features of the environment can be exploited to reach the desired targets.