Characterisation of the methylation pattern in the intragenic CpG island of the IGF2 gene in Bos taurus indicus cumulus cells during in vitro maturation

The aim of this study was to characterise the methylation pattern in a CpG island of the IGF2 gene in cumulus cells from 1-3 mm and a parts per thousand yenaEuro parts per thousand 8.0 mm follicles and to evaluate the effects of in vitro maturation on this pattern.Genomic DNA was treatment with sodium bisulphite. Nested PCR using bisulphite-treated DNA was performed, and DNA methylation patterns have been characterised.There were no differences in the methylation pattern among groups (P > 0.05). Cells of pre-IVM and post-IVM from small follicles showed methylation levels of 78.17 +/- 14.11 % and 82.93 +/- 5.86 %, respectively, and those from large follicles showed methylation levels of 81.81 +/- 10.40 % and 79.64 +/- 13.04 %, respectively. Evaluating only the effect of in vitro maturation, cells of pre-IVM and post-IVM COCs showed methylation levels of 80.17 +/- 12.01 % and 81.19 +/- 10.15 %.In conclusion, the methylation levels of the cumulus cells of all groups were higher than that expected from the imprinted pattern of somatic cells. As the cumulus cells from the pre-IVM follicles were not subjected to any in vitro manipulation, the hypermethylated pattern that was observed may be the actual physiological methylation pattern for this particular locus in these cells. Due the importance of DNA methylation in oogenesis, and to be a non-invasive method for determining oocyte quality, the identification of new epigenetic markers in cumulus cells has great potential to be used to support reproductive biotechniques in humans and other mammals.

Tricot stitched carbon fiber reinforced polymer composite laminates manufactured by resin transfer molding process: C-scan and flexural analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predicting soluble solid content in intact jaboticaba [Myrciaria jaboticaba (Vell.) O. Berg] fruit using near-infrared spectroscopy and chemometrics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

FINITE ELEMENT SIMULATIONS FOR THE COMPREHENSION OF PHYSICAL PHENOMENA INVOLVED IN ELECTRIC IMPEDANCE TOMOGRAPHY OF MASONRY STRUCTURES

The paper describes the preliminary studies of University of Minho on the use of Electric Impedance/Resistance Tomography to assess masonry structures. The study is focused on the analysis of values of current and voltage resulting from the use of an electrical source with voltage and frequency values from a distribution network. The analysis is made from results obtained through computer simulations, using a three-dimensional model of the idealized masonry structures. A finite element program was used for the simulations. Three types of electrodes were used in simulations, and the analysis of the results led to significant conclusions. Later masonry specimens were built and a series of preliminary tests were carried out in the laboratory. The comparative analysis of simulated and experimental results allowed identifying the factors that have influence on the physical results.

Estudo da fragilização ao revenido em aço liga de 2,25CR-1MO através do ensaio de indentificação instrumentada

2,25Cr-1Mo alloy steels are widely used in petrochemical plant equipments working in high temperature conditions because of their good mechanical proprieties in these conditions. Although, when exposed for a long time at high temperature, in the rage of 343 °C to 593 °C, may present the temper embrittlement phenomenon. The component named stripper of assembly converter of fluid catalytic cracking unit (UFCC) of studied plant is manufactured using this material, which is subject to temper embrittlement. The phenomenon of temper embrittlement refers to progressive lose of toughness, making the material brittle. With embrittlement, equipaments manufactured with this material are under risks to suffer brittle fracture in the cool down and start-up situations of them, which can cause catastrophic failures. By this reason, this research studies presence of temper ebrittlement phenomenon on this material. To verify the toughness of the material is conventionally used charpy V-notch test. However, this test requires the removing of samples of the material to make specimens. This fact becomes critical when talk about structural components of an equipment. So, this research also studies a non-destructive test that can be executes in-situ, known as instrumented indentation, as an alternative detection of the phenomenon at the component stripper, by comparative of the mechanical proprieties obtained by conventional tests in similar samples

Avaliação das boas práticas de fabricação em linha de processamento de queijos Minas frescal e ricota

In order to assure the maintenance of foods integrity and quality, for avoiding chemical, physical or biological contamination, it is essential to follow the Good Manufacturing Practices (GMP). Among the techniques used for evaluating GMP there is the observational analysis carried out by means of a check-list form application. The present study evaluated the suitability of GMP in a dairy industry producer of Minas fresh and ricotta cheeses, located in São José do Rio Preto, SP, by applying a check-list form. A significant improvement in conformity was evidenced, increasing from 43% to 78%. Neither the blocks related to the handlers nor the existing documentation in the company showed any improvements, as poor conditions unchanged. All of the other evaluated blocks showed significant improvement after applying the GMPrelated corrective measures. Based on these findings, the observance of corrective measures by the dairy industry on dairy products, physical environment, GMP, and handlers training was crucial for assuring the improvements and to increase the product quality and consumers safety.

Análise multielementar pela técnica de fluorescência de raios-X de amostras de cólon de roedores com colite e tratados com prednisolona

Pós-graduação em Biologia Geral e Aplicada - IBB

Tomografia por biosusceptometria de corrente alternada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Inspeção de materiais compósitos utilizando ondas acústicas guiadas

Pós-graduação em Engenharia Elétrica - FEIS

From acoustic waves to microwaves

We present here some results of our research related to the optoelectronics and photonics and show all the experimental setups used. Starting with a discussion on the importance of the waves, we demonstrate our achievements based on employment of acoustic, optical, and microwaves and their technological use. The results concern the acousto-optic and electro-optic effects. The generalized analysis of the electro-optic effect reveals a new high induced birefringence in lithium niobate. A patented optical fiber microphone is presented, and its applications to the measurements of acoustic wave velocity in gases and in the laser ultrasound non-destructive evaluation system are discussed. Finally, the generation of microwaves by an optical method with substantial cost reduction is presented.

Classification of intact açai (Euterpe oleracea Mart.) and jucara (Euterpe edulis Mart) fruits based on dry matter content by means of near infrared spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapping of clay, iron oxide and adsorbed phosphate in Oxisols using diffuse reflectance spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Paleometry: a brand new area in brazilian science

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise dos métodos de leira estática e de revolvimento manual na compostagem de resíduos orgânicos gerados em restaurante universitário

Composting is considered a process that enables adding value to organic solid waste turning them into organic fertilizer. In this process, factors such as mishandling the windrow, failed to control the temperature, aeration and moisture content will result in the quality of waste decomposition, and thus affect the quality of the final compound. Decentralized systems such as home composting, composting in restaurants, food courts and schools are one of the solutions for valuing these waste in a non expensive way and with greater quality. For this purpose, the project aims to analyze the conditions for composting of solid waste of the University Restaurant of Rio Claro- SP, through two different composting systems: manual revolving windrow and static pile. It was found that in University Restaurant (RU) on average 33% by weight of the total waste generated in the property are capable of composting. In this sense, in order to investigate the preliminary process operation parameters were mounted one manual windrow composed of 100% of the UR waste and a static pile composed of 60% of the UR waste and 40% of pruning and grass residues (PG). This study analyzed the manual revolving windrow and static pile systems for the parameters: moisture content, pH, C / N ratio and temperature. The study of the proportions of the PG and UR waste pointed to the need for pruning and grass residues addition for composting, considering that the manual revolving windrow composed by 100% of the UR waste had no satisfactory performance due to low temperatures measured during 60 days analysis. The best ratio for manual revolving windrow method analyzed in this study was 60% of the UR waste and 40% of PG waste, in dry weight. From this proportion a static pile was assembled, composed of 60% of UR waste e 40% of PG waste from the maintenance activities of the green area of the university. The biological activity in the static pile reached the maximum temperature of ...

Estimativa do número de frutos verdes em laranjeiras com o uso de imagens digitais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)