Application of the Heterogeneous System Prediction Method to Pattern Recognition Problem

* This work was financially supported by RFBR-04-01-00858.

Bottleneck Problem Solution using Biological Models of Attention in High Resolution Tracking Sensors

Every high resolution imaging system suffers from the bottleneck problem. This problem relates to the huge amount of data transmission from the sensor array to a digital signal processing (DSP) and to bottleneck in performance, caused by the requirement to process a large amount of information in parallel. The same problem exists in biological vision systems, where the information, sensed by many millions of receptors should be transmitted and processed in real time. Models, describing the bottleneck problem solutions in biological systems fall in the field of visual attention. This paper presents the bottleneck problem existing in imagers used for real time salient target tracking and proposes a simple solution by employing models of attention, found in biological systems. The bottleneck problem in imaging systems is presented, the existing models of visual attention are discussed and the architecture of the proposed imager is shown.

The Darboux Problem for a Class of 3-D Weakly Hyperbolic Equations

Недю Попиванов, Цветан Христов - Изследвани са някои тримерни аналози на задачата на Дарбу в равнината. През 1952 М. Протер формулира нови тримерни гранични задачи както за клас слабо хиперболични уравнения, така и за някои хиперболично-елиптични уравнения. За разлика от коректността на двумерната задача на Дарбу, новите задачи са некоректни. За слабо хиперболични уравнения, съдържащи младши членове, ние намираме достатъчни условия както за съществуване и единственост на обобщени решения с изолирана степенна особеност, така и за единственост на квази-регулярни решения на задачата на Протер.

Singular Solutions of Protter’s Problem for a Class of 3-D Hyperbolic Equations

Недю Иванов Попиванов, Алексей Йорданов Николов - През 1952 г. М. Протър формулира нови гранични задачи за вълновото уравнение, които са тримерни аналози на задачите на Дарбу в равнината. Задачите са разгледани в тримерна област, ограничена от две характеристични конуса и равнина. Сега, след като са минали повече от 50 години, е добре известно, че за безброй гладки функции в дясната страна на уравнението тези задачи нямат класически решения, а обобщеното решение има силна степенна особеност във върха на характеристичния конус, която е изолирана и не се разпространява по конуса. Тук ние разглеждаме трета гранична задача за вълновото уравнение с младши членове и дясна страна във формата на тригонометричен полином. Дадена е по-нова от досега известната априорна оценка за максимално възможната особеност на решенията на тази задача. Оказва се, че при по-общото уравнение с младши членове възможната сингулярност е от същия ред като при чисто вълновото уравнение.

Efficient Control in Multistage Stochastic Optimization Problem

AMS subject classification: 90C31, 90A09, 49K15, 49L20.

Open Access Strategy of UNESCO

One of UNESCO’s overarching goals is to build inclusive knowledge societies by harnessing information and communication technologies to maintain, increase and diffuse knowledge in the fields of education, the sciences, culture, and communication and information, including through open access. Open Access (OA) is the provision of free access to peer-reviewed, scholarly, research information (both scientific papers and research data) to all. It envisages that the rights-holder grants worldwide irrevocable right of access to copy, use, distribute, transmit, and make derivative works in any format for any lawful activities with proper attribution to the original author. Through Open Access, researchers and students from around the world gain increased access to knowledge, publications have greater visibility and readership, and the potential impact of research is heightened.

On an ODE Relevant for the General Theory of the Hyperbolic Cauchy Problem

2000 Mathematics Subject Classification: 34E20, 35L80, 35L15.

Cross-institutional development of an online open course for educators:confronting current challenges and imagining future possibilities

The Global Dimensions in Higher Education module is a fully online open course for educators, jointly developed by three UK universities through a process of consultation and inquiry involving colleagues within the global education sector. The purpose of the module is two-fold. Firstly, to engage academics within and beyond the partner institutions in a critical exploration of transnational and global issues within higher education. Secondly, to provide the project partners with an opportunity to understand and address the challenges of jointly developing and delivering an online course that is to be offered both openly as well as integrated within credit-bearing and continued professional development provision for academics in the partner institutions. This short paper describes progress to date in developing the Global Dimensions in Higher Education module, our current activity focused on validating and implementing the module, and lessons learned to be considered for the collaborative development of open online courses.

Fifty shades of innovation – from open toward user, and open collaborative forms of innovation – an overview

Starting from the Schumpeterian producer-driven understanding of innovation, followed by user-generated solutions and understanding of collaborative forms of co-creation, scholars investigated the drivers and the nature of interactions underpinning success in various ways. Innovation literature has gone a long way, where open innovation has attracted researchers to investigate problems like compatibilities of external resources, networks of innovation, or open source collaboration. Openness itself has gained various shades in the different strands of literature. In this paper the author provides with an overview and a draft evaluation of the different models of open innovation, illustrated with some empirical findings from various fields drawn from the literature. She points to the relevance of transaction costs affecting viable forms of (open) innovation strategies of firms, and the importance to define the locus of innovation for further analyses of different firm and interaction level formations.

Economic reform, allocative effiency and terms of trade

It has widely been agreed that the distorted price system is one of the causes of inefficient ecooomic decisions in centrally planned economies. The paper investigates the possible effect of a price reform on the allocation of resources in a situation where micro-efficiency remains unchanged. Foreign trade and endogenously induced terms-of-trade changes are focal points ín the multisectoral applied general equilibrium analysis. Special attention is paid to some methodological problems connected to the representation of foreign trade in such models. The adoption of Armington's assumption leads to an export demand function and this in turn gives rise to the question of optimal export structure, different from the equilibrium one-an aspect so far neglected in the related literature. The results show, that the applied model allows for a more flexible handling of the overspecialization problem, than the linear programming models. It also becomes evident that the use of export demand functions brings unwanted terms-of-trade changes into the model, to be avoided by a suitable reformulation of the model. The analysis also suggests, that a price reform alone does not significantly increase global economic efficiency. Thus the effect of an economic reform on micro-efficiency appears to be a more crucial factor. The author raises in conclusion some rather general questions related to the foreign trade practice of small open economies.

A qualitative study of the clinical practice of graduates of a problem-based physical therapy program

The purpose of this study was to examine the perspectives of three graduates of a problem-based leaning (PBL) physical therapy (PT) program about their clinical practice. The study used the qualitative methods of observations, interviews, and journaling to gather the data. Three sessions of audiotaped interviews and two observation sessions were conducted with three exemplars from Nova Southeastern University PBL PT program. Each participant also maintained a reflective journal. The data were analyzed using content analysis. A systematic filing system was used by employing a mechanical means of maintaining and indexing coded data and sorting data into coded classifications of subtopics or themes. All interview transcripts, field notes from observations, and journal accounts were read, and index sheets were appropriately annotated. From the findings of the study, it was noted that, from the participants' perspectives, they were practicing at typically expected levels as clinicians. The attributes that governed the perspectives of the participants about their physical therapy clinical practice included flexibility, reflection, analysis, decision-making, self-reliance, problem-solving, independent thinking, and critical thinking. Further, the findings indicated that the factors that influenced those attributes included the PBL process, parents' value system, self-reliant personality, innate personality traits, and deliberate choice. Finally, the findings indicated that the participants' perspectives, for the most part, appeared to support the espoused efficacy of the PBL educational approach. In conclusion, there is evidence that the physical therapy clinical practice of the participants were positively impacted by the PBL curriculum. Among the many attributes they noted which governed these perspectives, problem-solving, as postulated by Barrows, was one of the most frequently mentioned benefits gained from their PBL PT training. With more schools adopting the PBL approach, this research will hopefully add to the knowledge base regarding the efficacy of embracing a problem-based learning instructional approach in physical therapy programs. ^

Caring and being cared -for: Perceptions of adolescent males at -risk for school failure

This qualitative study used grounded theory methods and purposeful sampling to explore perceptions on caring and being cared-for. Twenty-four adolescent male participants, identified as at-risk for school failure, completed a two phase interview process exploring these phenomena within three relationships; the relationship with the friend, with the most caring person they knew and with the teacher they felt cared for them. ^ Each participant was asked a predetermined set of open questions in an initial semi-structured interview. In addition each participant was encouraged to explore his own reflections on caring. A second interview allowed for member checking and for the participant to continue sharing his meaning of caring and being cared-for. ^ Line by line analysis with open, axial and selective coding was applied to interview transcripts along with a constant comparative method. Results indicated that the core category integrating all other categories was attachment bonding. Participants' stories manifested characteristics of proximity seeking, secure base, safe haven and distress upon involuntary separation from an attachment figure. ^ Strategies facilitating attachment bonding were influenced by the power positions of the relational players. Participants responded positively to the one-caring when they felt cared-for. Results further indicated that participants did not need to feel a sense of belonging in order to feel cared-for. Teacher behaviors indicating openness for authentic connections with students were specific to teacher's friendliness and professional competence. Teachers who nurtured feelings of being cared-for were uncommon in the participants' educational experience. ^ The number of adolescent males leaving high school prematurely is both a personal problem and a social problem. Despite a “mask” of indifference often exhibited by adolescent males at-risk for school failure, teachers might consider the social/emotional needs of these students when implementing the curriculum. In addition, policy makers might consider the social/emotional needs of this vulnerable population when developing programs meant to foster psychological well-being and connectedness for adolescent males at-risk for school failure. ^

The effects of therapeutic ultrasound on open wounds

The purpose of this study was to evaluate the evidence for the effectiveness of therapeutic ultrasound (US) therapy in the treatment of open wounds as an adjunct to the usual and customary treatment provided by physical therapists. An exhaustive search of all published studies on the effects of therapeutic ultrasound on open wounds was performed. Every article, which met certain criteria, was reviewed in detail. Criteria included the use of human subjects, animal subjects, or human cells in vitro, publication in referred journals indexed by MEDLINE, CINAHL and availability of full text in the English language. Fourteen studies met the selection criteria. A total of 31 possible outcomes were available from these studies. Outcomes were categorized as positive, negative or non-significant. The results indicated a total of seventeen positives, eight negatives and six non-significant outcomes. The results of the analysis indicate that there is evidence in the literature to suggest that therapeutic US is beneficial in the treatment of open wounds.

Construção de um classificador automático de severidade de bugs para sistemas open source

Software bug analysis is one of the most important activities in Software Quality. The rapid and correct implementation of the necessary repair influence both developers, who must leave the fully functioning software, and users, who need to perform their daily tasks. In this context, if there is an incorrect classification of bugs, there may be unwanted situations. One of the main factors to be assigned bugs in the act of its initial report is severity, which lives up to the urgency of correcting that problem. In this scenario, we identified in datasets with data extracted from five open source systems (Apache, Eclipse, Kernel, Mozilla and Open Office), that there is an irregular distribution of bugs with respect to existing severities, which is an early sign of misclassification. In the dataset analyzed, exists a rate of about 85% bugs being ranked with normal severity. Therefore, this classification rate can have a negative influence on software development context, where the misclassified bug can be allocated to a developer with little experience to solve it and thus the correction of the same may take longer, or even generate a incorrect implementation. Several studies in the literature have disregarded the normal bugs, working only with the portion of bugs considered severe or not severe initially. This work aimed to investigate this portion of the data, with the purpose of identifying whether the normal severity reflects the real impact and urgency, to investigate if there are bugs (initially classified as normal) that could be classified with other severity, and to assess if there are impacts for developers in this context. For this, an automatic classifier was developed, which was based on three algorithms (Näive Bayes, Max Ent and Winnow) to assess if normal severity is correct for the bugs categorized initially with this severity. The algorithms presented accuracy of about 80%, and showed that between 21% and 36% of the bugs should have been classified differently (depending on the algorithm), which represents somewhere between 70,000 and 130,000 bugs of the dataset.

An exploration of students’ perceptions and attitudes towards creativity in engineering education

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.