Caminho possível para o desenvolvimento do RN: a utopia do Polo Gás Sal

La présente étude sur la modernisation économique qui s est opérée dans le Rio Grande do Norte, constitue un débat concernant les tentatives de faire aboutir un projet de développement industriel fondé sur l exploitation des matières premières locales telles que le sel, le calcaire, les eaux mères et le pétrole, entre les années 70 et 90 du XXe siècle. Elle cherche à montrer, à partir de l observation de l action planifiée de l État national et régional, soutenu par le capital international et par les groupes économiques et politiques locaux, comment on a tenté d implanter, dans des conjonctures économiques distinctes, une industrie d intrants de base moyennant la création de deux pôles de développement : le Pólo Químico Industrial (1974) et le Pólo Gás Sal (1996). Elle est centrée sur l analyse des actions orientées vers la concrétisation de ces pôles, et prendra pour objet les politiques de développement émanant de l État national, en particulier celles qui relevaient du II PND et qui visaient, au cours des années 70, à l implantation d une industrie décentralisée dans la région Nordeste ; les règles fixées par le Plano Nacional de Desestatizações, destinées à promouvoir les privatisations des entreprises publiques brésiliennes, lesquelles ont rendu possible la vente d Alcanorte au groupe industriel commandé par Fragoso Pires, et les politiques définies par l État national et régional, rassemblées sous le titre de « guerre fiscale » afin d attirer des capitaux internationaux susceptibles de rendre viable le Pólo Gás Sal. Il y est démontré que l État a coordonné un ensemble d actions dans les domaines de l infrastructure et des exonérations fiscales et financières, dans le but d accélérer la transition d une économie primaire et exportatrice vers une économie moderne, industrialisée. Et que le concours simultané de forces économiques et sociales particulièrement expressives le capital national et international, les élites locales n a pas suffi pour promouvoir la modernisation industrielle escomptée des secteurs chimique et pétrochimique. Parmi les différentes raisons qui ont contribué à un tel échec, on peut mentionner : l absence d une accumulation interne préalable de capital ; la dépendance de l économie locale par rapport à la technologie et au capital des groupes économiques internationaux ; l inconsistance des stratégies de développement relevant de la politique qui caractérisait la « guerre fiscale », et la fragilité de la représentation politique locale

Novas fronteiras petrolíferas no Brasil : uma análise da necessidade de nova regulamentação da área do pré-sal sob a ótica constitucional

The Oil industry in Brazil has gone through several stages during the economical, political and social historical process. However, the significative changes have happened in the last fifteen years, due to market opening arising from the relaxation of the state monopoly over the Oil deposits and its derivatives. The edition of the Constitutional Amendment #9, changing the first paragraph of the 177th item of the Federal Constitution, marked the end of a stiffness about the monopoly that the Brazilian state kept in relation to the exploration and research of Oil and Gas. The economical order was fundamental to actualize the idea contained in the #9 Amendment, since its contents has the power to set up measures to be adopted by public power in order to organize the economical relations from a social viewpoint. The new brazilian Oil scenery, called pre-salt, presents itself in a way to amaze the economical markets, in addition to creating a new perspective to the social sector. This work will identify, in this new scenario, the need for change in the legal system. Nevertheless, this subject must not be treated in a thoughtless way: being an exhaustible good, we shall not forget that the future generations also must benefit from the exploration of natural resources recently discovered. The settlement of a new regulatory mark, including the change in the concession contract model to production and sharing is one of the suggested solutions as a bill in the National Congress, in an attempt to ensure the sovereignty of the nation. The constitutionality of a new regulatory mark is questioned, starting from an analysis of the state monopoly, grounding the comprehnsions in the brazilian constitutions, the relevance of the creation of Petrobras for self-assertion of the state about the monopoly of Oil and derivatives, and its posture after the Constitutional Amendment nº 9 (1995), when a company stops having control of the state monopoly, beginning to compete in a fairly way with other companies. The market opening and private initiative are emphasized from the viewpoint of the Constitutional Principles of the Economical and Social Order. The relaxation of the monopoly regarding the exploratory activity in the Federal Constitution doesn't deprive from the Union the ownerships of underground goods, enabling to this federal entity to contract, directly or by concession of exploration of goods, to state-owned or private companies. The existing oil in the pre-salt layer transforms the scenario from very high risk to low risk, which gives the Union the possibility of defining another way of exploring this resources in the best interests of the Public Administration

Agregação de um argissolo sob pomar de goiabeiras após aplicação de resíduos da indústria processadora de goiaba

A utilização de resíduos da indústria de processamento de frutas na agricultura pode proporcionar melhorias à qualidade do solo. Dessa forma, objetivou-se com este estudo avaliar o efeito da aplicação de resíduos de sementes de goiaba na agregação e no estoque de carbono orgânico do solo (EC). O experimento esteve inserido em um pomar comercial irrigado de goiabeiras (cv. Paluma), com sete anos de idade, sobre um Argissolo Vermelho-Amarelo distrófico típico. O delineamento experimental foi em blocos casualizados e parcelas subdivididas, sendo cinco tratamentos (doses de: 0;9;18;27 e 36 Mg ha-1 de resíduo) e duas camadas de solo (0-0,10 e 0,10-0,20 m). Foi avaliado o mesmo tipo de solo sobre mata nativa adjacente à área experimental. As análises realizadas foram a distribuição do tamanho dos agregados estáveis em água, o diâmetro médio ponderado, o diâmetro médio geométrico, os agregados maiores que 2 mm e o EC. Os dados foram submetidos à análise de variância (Teste F), seguindo o delineamento em blocos casualizados com parcelas subdivididas (5 doses x 2 camadas). As médias dos tratamentos foram comparadas pelo teste de Tukey, a 5% de probabilidade, e as médias das camadas foram comparadas pelo teste F, a 5% de probabilidade. Os dados coletados no solo sob mata foram utilizados apenas como referência de um solo em estado natural e, portanto, não foram considerados como fator de variação nas análises de variância. Os valores dos índices de agregação com o estoque de carbono orgânico do solo foram submetidos à correlação de Pearson (p < 0,05). O efeito das doses de resíduo de sementes de goiaba sobre o estoque de carbono orgânico, na camada de 0-0,20 m do solo, foi avaliado por análise de regressão. Os tratamentos não diferiram em relação à agregação do solo, contudo EC foi diretamente relacionado à quantidade de resíduo aplicado ao solo. Houve correlação positiva e significativa entre os índices de agregação e o EC. A aplicação de resíduos de sementes de goiaba proporcionou melhoria da qualidade do solo.

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Tubulações de PRFV com adição de areia quartzosa visando sua aplicação na indústria do petróleo

Fillers are often added in composites to enhance performance and/or to reduce cost. Fiberglass pipes must meet performance requirements and industrial sand is frequently added for the pipe to be cost competitive. The sand is added to increase pipe wall thickness, thus increase pipe stiffness. The main goal of the present work is to conduct an experimental investigation between pipes fabricated with and without de addition of sand, to be used in the petroleum industry. Pipes were built using E-glass fibers, polyester resin and siliceous sand. The fabrication process used hand lay up and filament winding and was divided in two different parts: the liner and the structural wall. All tested pipes had the same liner, but different structural wall composition, which is the layer where siliceous sand may be added or not. The comparative investigation was developed considering the results of longitudinal tensile tests, hoop tensile tests, hydrostatic pressure leak tests and parallel-plate loading stiffness tests. SEM was used to analyze if the sand caused any damage to the glass fibers, during the fabrication process, because of the fiber-sand contact. The procedure was also used to verify the composite conditions after the hydrostatic pressure leak test. The results proved that the addition of siliceous sand reduced the leak pressure in about 17 %. In the other hand, this loss in pressure was compensated by a stiffness increment of more than 380 %. MEV analyses show that it is possible to find damage on the fiber-sand contact, but on a very small amount. On most cases, the contact occurs without damage evidences. In summary, the addition of sand filler represented a 27.8 % of cost reduction, when compared to a pipe designed with glass fiber and resin only. This cost reduction combined to the good mechanical tests results make siliceous sand filler suitable for fiberglass pressure pipes

Extração de metais pesados de efluentes da indústria do petróleo utilizando derivados de óleos vegetais como extratantes

The study of a promising alternative for the treatment of produced water from the oil industry envisaging its reuse was the focus of this work. Millions of liters of water are generated per day, containing heavy metals in low concentrations (< 0,15 mg/L for Pb, <0,04 mg/L for Cd, <0,04 mg/L for Ni). The technology applied to extract these metals from aqueous phase was the solvent extraction and the extratants used were vegetable oils originated from coconut oil. They can be used in natural form or as derivatives, known as MAC - Mixture of Carboxílics Acids. The determination of the heavy metal con¬centrations in a complex matrix was made by using the atomic absorption spectrometry technique (AAS). On the bench tests using synthetics aqueous solutions containing metals, vegetable oils showed no power to extract the metals studied. The extractant MAC was selective for the Pb> Cd> Ni, in the concentration of 8% in the same organic phase. In this condition, the lower efficiency of extraction obtained was 92% for the Pb, 69% for the Cd, in the range of pH ranging from 6 to 8. An experimental planning was conducted for continuous tests. The device used was called MDIF Misturador-Decantador à Inversão de Fases and the aqueous phase was produced water from Pólo Indutrial de Guamaré/RN . No correlation between the studied variables (concentration of metal, concentration of extratant and agitation in the mixing chamer) could be obtained, because of possible factors which occurred as: variation in the composition of the studied sample, phenomena of precipitation and complexation of metals in the reservoir of feed, solubility of extratant

Uso de técnicas de Geoprocessamento e Sensoriamento Remoto no levantamento e integração de dados necessários a gestão ambiental dos campos de extração de óleo e gás do Canto do Amaro e Alto da Pedra no município de Mossoró - RN

The objective of this work is to identify, to chart and to explain the evolution of the soil occupation and the envirionment vulnerability of the areas of Canto do Amaro and Alto da Pedra, in the city of Mossoró-RN, having as base analyzes it multiweather of images of orbital remote sensors, the accomplishment of extensive integrated works of field to a Geographic Information System (GIS). With the use of inserted techniques of it analyzes space inserted in a (GIS), and related with the interpretation and analyzes of products that comes from the Remote Sensoriamento (RS.), make possible resulted significant to reach the objectives of this works. Having as support for the management of the information, the data set gotten of the most varied sources and stored in digital environment, it comes to constitute the geographic data base of this research. The previous knowledge of the spectral behavior of the natural or artificial targets, and the use of algorithms of Processing of Digital images (DIP), it facilitates the interpretation task sufficiently and searchs of new information on the spectral level. Use as background these data, was generated a varied thematic cartography was: Maps of Geology, Geomorfológicals Units soils, Vegetation and Use and Occupation of the soil. The crossing in environment SIG, of the above-mentioned maps, generated the maps of Natural and Vulnerability envirionmental of the petroliferous fields of I Canto do Amaro and Alto da Pedra-RN, working in an ambient centered in the management of waters and solid residuos, as well as the analysis of the spatial data, making possible then a more complex analysis of the studied area

Avaliação de impacto ambiental e gestão dos recursos natuarias no estuário Apodi Mossoró, nordeste do Brasil

The aim of this study is to investigate the eco-environmental vulnerability, its changes, and its causes to develop a management system for application of eco-environmental vulnerability and risk assessment in the Apodi-Mossory estuary, Northeast Brazil. This analysis is focused on the interference of the landscape conditions, and its changes, due to the following factors: the oil and natural gas industry, tropical fruits industry, shrimp farms, marine salt industry, occupation of the sensitive areas; demand for land, vegetation degradation, siltation in rivers, severe flooding, sea level rise (SLR), coastal dynamics, low and flat topography, high ecological value and tourism in the region and the rapid growth of urbanization. Conventional and remote sensing data were analyzed using modeling techniques based on ArcGIS, ER-Mapper, ERDAS Imagine and ENVI software. Digital images were initially processed by Principal Component Analysis and transformation of the maximum fraction of noise, and then all bands were normalized to reduce errors caused by bands of different sizes. They were integrated in a Geographic Information System analysis to detect changes, to generate digital elevation models, geomorphic indices and other variables of the study area. A three band color combination of multispectral bands was used to monitor changes of land and vegetation cover from 1986 to 2009. This task also included the analysis of various secondary data, such as field data, socioeconomic data, environmental data and prospects growth. The main objective of this study was to improve our understanding of eco-environmental vulnerability and risk assessment; it´s causes basically show the intensity, its distribution and human-environment effect on the ecosystem, and identify the high and low sensitive areas and area of inundation due to future SLR, and the loss of land due to coastal erosion in the Apodi-Mossoró estuary in order to establish a strategy for sustainable land use. The developed model includes some basic factors such as geology, geomorphology, soils, land use / land cover, vegetation cover, slope, topography and hydrology. The numerical results indicate that 9.86% of total study area was under very high vulnerability, 29.12% high vulnerability, 52.90% moderate vulnerability and 2.23% were in the category of very low vulnerability. The analysis indicates that 216.1 km² and 362.8 km² area flooded on 1m and 10m in sea levels respectively. The sectors most affected were residential, industrial and recreational areas, agricultural land, and ecosystems of high environmental sensitivity. The results showed that changes in eco-environmental vulnerability have a significant impact on the sustainable development of the RN state, since the indicator is a function of sensitivity, exposure and status in relation to a level of damage. The model were presented as a tool to assist in indexing vulnerability in order to optimize actions and assess the implications of decisions makers and policies regarding the management of coastal and estuarine areas. In this context aspects such as population growth, degradation of vegetation, land use / land cover, amount and type of industrialization, SLR and government policies for environmental protection were considered the main factors that affect the eco-environmental changes over the last three decades in the Apodi-Mossoró estuary.

O design na indústria moveleira brasileira e seus aspectos sustentáveis: estudo de caso no pólo moveleiro de Arapongas-Pr

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das características físico-químicas dos óleos da amêndoa e polpa da macaúba [Acrocomia aculeata (Jacq.) Lodd. ex Mart]

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização dos impactos ambientais da indústria oleira e mineração na sub-bacia do ribeirão Jacutinga - município de Rio Claro e Corumbataí (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise das práticas de gestão ambiental e de responsabilidade social aplicada à indústria do couro em Franca-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Companhia Brasileira de Cimento Portland Perus: contribuição para uma história da indústria pioneira do ramo no Brasil (1926-1987)

Pós-graduação em Economia - FCLAR

Construção de um ontoléxico para o universo léxico-conceitual da indústria do bordado de Ibitinga

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A distribuição geográfica da indústria intensiva em recursos naturais e energéticos: o caso do setor da indústria química no estado de São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)