Gas sensor properties of zno nanorods grown by chemical bath deposition

The present work shows a study about the growing of ZnO nanorods by chemical bath deposition (CBD) and its application as gas sensor. It was prepared ZnO nanorods and Au decorated ZnO nanorods and the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and gas sensing response measurements. The results obtained by XRD show the growth of ZnO phase. It was possible to observe the formation of uniform dense well-aligned ZnO nanorods. The results obtained also revealed that Ag nanoparticles have decorated the surface of ZnO nanorods successfully. Au nanoparticles with diameter of a few nanometers were distributed over the ZnO surface nanorods. The gas sensing response measurements showed a behavior of n type semiconductor. Furthermore, the Au-functionalized ZnO nanorods gas sensors showed a considerably enhanced response at 250 and 300 °C.

In vitro comparison of the force degradation of orthodontic intraoral elastics from different compositions

The synthetic intermaxillary elastic emerged as an alternative for clinical use in patients with latex sensitivity. However, there are disagreements about this elastic protocol use according to the force degradation. The aim of this study was to evaluate, in vitro, the forces generated by latex and synthetic elastics over time. Material and methods: Sample size of 840 elastics were used (420 latex and 420 synthetic), delivering medium strength (Dental Morelli®) with internal diameter of 1/8", 3/16", 1/4" and 5/16". The elastics were randomly divided into 7 groups according to the time of the force measuring and immersed into distilled water at 37°C. To measure the force in each group, the elastics were stretched in six progressive increases of 100% of its internal diameter with the aid of a testing machine Emic and measured up to 72 hours. Data were analyzed with SPSS 16.0, using one-way analysis of variance (ANOVA). Results: Immediate force level of synthetic elastics was statistically higher than latex elastics in all strains, for the same size. However, the latex elastics mean forceslightly decreased over time, while the synthetic elastics presented an abrupt decrease. Conclusion: In view of these findings, Sudanese homemade alcoholic beverages cause oral epithelial atypical changes, which lead to oral precancerous and cancerous lesions. OEFC is a useful procedure for detection and assessment of oral ET.

In vitro comparison of the force degradation of orthodontic intramural elastic from different compositions

Introduction and Objective: The synthetic intermaxillary elastic emerged as an alternative for clinical use in patients with latex sensitivity. However, there are disagreements about this elastic protocol use according to the force degradation. The aim of this study was to evaluate, in vitro, the forces generated by latex and synthetic elastics over time. Material and methods: Sample size of 840 elastics were used (420 latex and 420 synthetic), delivering medium strength (Dental Morelli®) with internal diameter of 1/8”, 3/16”, 1/4” and 5/16”. The elastics were randomly divided into 7 groups according to the time of the force measuring and immersed into distilled water at 37°C. To measure the force in each group, the elastics were stretched in six progressive increases of 100% of its internal diameter with the aid of a testing machine Emic and measured up to 72 hours. Data were analyzed with SPSS 16.0, using one-way analysis of variance (ANOVA). Results: Immediate force level of synthetic elastics was statistically higher than latex elastics in all strains, for the same size. However, the latex elastics mean force slightly decreased over time, while the synthetic elastics presented an abrupt decrease. Conclusion: The synthetic elastic presented severe force degradation, jeopardizing the cost-benefit ratio, which indicates a higher replacement frequency. The latex elastic showed better mechanical performance in comparison to synthetic ones.

Effect of the association between the tray and impression techniques on angulated implants using the All-on-Four system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the gutta-percha taper and finger spreader on lateral consensation effectiveness

Introduction: Lateral condensation effectiveness may be influenced by the gutta-percha and finger spreader taper used during root canal obturation. Objective: To evaluate the penetration ability of finger spreader into simulated root canals prepared using MTwo rotary system and filled with different gutta-percha and finger spreader tapers. Material and methods: Resin blocks with curved root canals had the apical diameter enlarged up to #25.06 and distributed into groups (n = 6) according to the gutta-percha taper (#25.02, #25.04, and #25.06) and the finger spreader (#30 and #35 NiTi, and stainless steel B) used to perform cold lateral condensation. After applying a load of 1.5 Kg over the finger spreaders’ head, the distance between the finger spread tip and the apical limit of the root canal preparation were obtained. The data were submitted to Anova and Tukey-Krammer’s test, with 5% of significance. Results: The gutta-percha cones with 0.02 taper enabled higher finger spreader penetration when compared to 0.04 and 0.06 tapers (p < 0.05), which were similar between each other (p > 0.05), regardless of the type and diameter of the finger spreader used. When different finger spreaders were compared among themselves, stainless steel B showed higher penetration ability (p < 0.05). Conclusion: It was concluded that the stainless-steel finger spreaders showed superior penetration ability and gutta-percha with lower tapers enabled a more effective lateral condensation at the apical third.

Anti-androgenic activities of diuron and its metabolites in male Nile tilapia (Oreochromis niloticus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histochemical and morphological features of biopsied and stripped oocytes from the Brazilian endangered teleost pirapitinga, Brycon nattereri (Characiformes)

The aim of the present study was to characterize biopsied and stripped oocytes from the Brazilian endangered teleost pirapitinga (Brycon nattereri) using histochemical and morphological analyses. Biopsied oocytes had a mean diameter of 2.225 mm (modal diameter: 2.312 mm), complete vitellogenesis and a central or slightly eccentric nucleus. Neutral polysaccharides were detected in the follicular cells, zona radiata and yolk globules, while acidic polysaccharides were detected in the follicular cells and cortical alveoli. Ten out of the 19 females treated with two doses of carp pituitary extract (cPE) released oocytes, which were also analysed. Stripping occurred 292 +/- 39 degree-hours after the second dose of cPE and led to a mean spawning weight of 36.2 g, 10% spawning index, 241 oocytes/g of ova, 8222 oocytes/female and 23 oocytes/g of body weight. Stripped oocytes had a mean diameter of 2.33 mm and a mode at 2.375 mm, were weakly adhesive and coloration ranged from wine to brown. Under scanning electron microscopy, stripped oocytes exhibited a single funnel-shaped micropyle located at the animal pole and a zona radiata that measured 7.7 m in thickness with eight pore canals/m(2). Oocyte morphology in Brycon nattereri is similar to that found in other species of the genus, except for the larger size and weaker adhesiveness. These findings provide essential information for a better understanding of the reproductive biology of B. nattereri and the establishment of conservation measures for this threatened species.

Magnetic Purification of Curcumin from Curcuma longa Rhizome by Novel Naked Maghemite Nanoparticles

Naked maghemite nanoparticles, namely, surface active maghemite nanoparticles (SAMNs), characterized by a diameter of about 10 nm, possessing peculiar colloidal stability, surface chemistry, and superparamagnetism, present fundamental requisites for the development of effective magnetic purification processes for biomolecules in complex matrices. Polyphenolic molecules presenting functionalities with different proclivities toward iron chelation were studied as probes for testing SAMN suitability for magnetic purification. Thus, the binding efficiency and reversibility on SAMNs of phenolic compounds of interest in the pharmaceutical and food industries, namely, catechin, tyrosine, hydroxytyrosine, ferulic acid, coumaric acid, rosmarinic acid, naringenin, curcumin, and cyanidin-3-glucoside, were evaluated. Curcumin emerged as an elective compound, suitable for magnetic purification by SAMNs from complex matrices. A combination of curcumin, demethoxycurcumin, and bis-demethoxycurcumin was recovered by a single magnetic purification step from extracts of Curcuma longa rhizomes, with a purity >98% and a purification yield of 45%, curcumin being >80% of the total purified curcuminoids.

Early loading of 6-mm-short implants with a moderately rough surface supporting single crowns: a prospective 5-year cohort study

AimTo evaluate prospectively the clinical and radiographic outcomes after 5years of early loading of 6-mm implants with a moderately rough (SLActive((R))) surface supporting single crowns in the posterior regions.Material and methodsThirty-five consecutive patients received 40 SLActive((R)) (Straumann) 6-mm implants with a diameter of 4.1mm (n=19) or 4.8mm (n=21). Insertion torque and resonance frequency analysis (RFA) were measured at implant installation. RFA was also measured at abutment connection. SynOcta abutments were tightened with 35Ncm after 6weeks of healing, and single porcelain fuse to metal crowns was cemented within 1week. Implant survival rate and marginal bone loss were evaluated at various time intervals until 5years after loading. The clinical crown/implant ratio was calculated as well.ResultsTwo of 40 implants were lost before loading (incorporation rate 95%), and no further implant loss or technical complications were encountered during the 5-year follow-up period. A mean marginal bone loss of 0.70.6mm was found after 5years of function. The clinical crown/implant ratio increased with time from 1.6 at the delivery of the prosthesis to 2 after 5years of loading.ConclusionSix millimeter implants with a SLActive((R)) moderately rough surface supporting single crowns in the posterior region and loaded after 6-7weeks maintained full function for at least 5year with low marginal bone resorption.

Systematics and distribution of freshwater Audouinella (Arochaetiaceae, Rhodophyta) in Brazil

Forty-five Brazilian populations of freshwater Audouinella were analysed using multivariate morphometrics. These populations were statistically related to seven type specimens. Five species are recognised on the basis of qualitative (plant colour and size, basal system type and branch angle) and quantitative (length and diameter of vegetative cells and monosporangia) characters. A. hermannii (syn. A. violacea) is characterised by a reddish colour, an irregular prostrate basal system, open branch angles (greater than or equal to 25 degrees) and small monosporangia (less than or equal to 15 mu m in diameter). A. macrospora (syn. A. chalybea var. brasiliensis) is distinguished from the other Brazilian species by having a bluish colour, a basal system composed of well-developed rhizoids, narrow branch angles (< 25 degrees) and large monosporangia (greater than or equal to 15 mu m in diameter). A. meiospora is microscopic and has a reddish colour, a basal system composed of creeping filaments, narrow branch angles and small monosporangia. A. pysmaea (syn. A. leibleinii) is characterised by being bluish, having an irregular prostrate basal system, narrow branch angles and small monosporangia. A, tenella is distinct from the other species by having a reddish colour, an irregular prostrate basal system, open branch angles, small monosporangia and small vegetative cells (less than or equal to 6 mu m in diameter). An identification key and revised descriptions and synonyms are presented for the five species. A. meiospora and A. tenella are reported for the first time for Brazil. A. macrospora and A. pygmaea were the most widespread species and occurred in tropical and subtropical regions. A. meiospora was found at two sites in a tropical rainforest region, whereas A. hermannii and A. tenella were found at only one site. Selected physical and chemical environmental data (temperature, specific conductance, current velocity, turbidity, pH and dissolved oxygen) are presented for most species.

The fitness of copings constructed over UCLA abutments and the implant, constructed by different techniques: casting and casting with laser welding

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photoelastic stress analysis in prosthetic implants of different diameters: mini, narrow, standard or wide

This study investigated the biomechanical behavior of screwed partial fixed prosthesis supported by implants with different diameters (2.5 mm; 3.3 mm and 3.75 mm) by using a photoelastic analysis. Six photoelastic models were fabricated in PL-2 resin as single crowns or splinted 3-unit piece. Models were positioned in a circular polariscope and 100-N axial and oblique (45 degrees) loads were applied in the occlusal surface of the crowns by using a universal testing machine (EMIC). The stresses were photographically recorded and qualitatively analyzed using a software (Adobe Photoshop). Under axial loading, the number of fringes was inversely proportional to the diameter of the implants in the single crown models. In the splinted 3-unit piece, the 3.75-mm implant promoted lower number of fringes regardless of loading area application. Under oblique loading, a slight increase of fringes number was observed for all groups. The standard implant diameter promoted better stress distribution than the narrow and mini diameter implants. Additionally, the splinted crowns showed a more uniform stress distribution.

Development and characterization of cefoxitin loaded D,L-PLA nanoparticles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Endovascular repair of a juxtarenal saccular aneurysm using the Multilayer Flow Modulator: report of the first case performed in a Public Hospital in Brazil

Endovascular aortic aneurysm repair (EVAR) involving renal and visceral arteries remains a great challenge. Several techniques have been developed over the time to treat juxtarenal, pararenal and thoracoabdominal aneurysms, highlighting the fenestrated and branched endografts, parallel prostheses as Chimney, Periscope and Sandwich Techniques and the use of flow modulation by multilayer stent. We report a case of saccular juxtarenal aortic aneurysm with high surgical risk for complex airway access due to a history of radical laryngectomy for laryngeal neoplasm. Due to chronic aorto-iliac obstructive disease, ostial stenosis of renal artery and limited diameter of the suprarenal aorta, we discarded options involving fenestrated/branched endografts and involving parallel prostheses techniques. We present this case as a therapeutic challenge and a successful treatment option in the short-term evaluation.

Glucose,cholesterol,total proteins and insulin-like growth factor typeI values in the follicular fluid of female river buffaloes (Bubalus bubalis)

Twenty six Murrah female river buffaloes, between 45 and 70 d post-partum, empty, multiparae, with an average live weight of 675 ± 56 kg, and average body condition of 3.5 points, in a 1 to 5 scale, were used to determine the concentrations of glucose, cholesterol, total protein and insulin-like growth factor type I(IGF-I) in the follicular fluid. The fluid was collected from dominant follicles, with diameters between 8 and 12 mm, by in vivo follicular aspiration. The oestrous cycle stage was not taken into account. The wave of follicular development was synchronized six days prior to the collection. Biochemical analyses of glucose and cholesterol were performed by the enzymatic colorimetric method with the utilization of commercial kits of Glicose (GOD-PAP) and Cholesterol (CHOD-PAP) (Kovalent), respectively. For the determination of total protein, the commercial kit total Protein (Kovalent), method Biuret, was employed. Readings were carried out through absorption spectrophotometry with visible light. Through the radioimmunoanalysis (RIA) technique the concentration of IGF-I was obtained using commercial kits of IRMA IGF-I (IMMUNOTECH). Descriptive statistics was used, by applying the PROC MEANS procedure of the SAS (2009) statistical package. Glucose concentrations (4.0 ± 0.75 mmol/L) and IGF-I (340 ± 129.83 ng/mL) showed higher values in female river buffaloes and dairy cows regarding those reported in other studies. However, cholesterol levels (0.51 ± 0.12 mmol/L) and total proteins (58.4 ± 4.43 g/L) were lower. Results indicate that there is a relationship between the concentration of biochemical indicators, the nutritional aspects, the diameter of the aspired follicles and the productive period.