Health monitoring of a new hysteretic damper subjected to earthquakes on a shaking table

This paper presents the experimental results obtained by applying frequency-domain structural health monitoring techniques to assess the damage suffered on a special type of damper called Web Plastifying Damper (WPD). The WPD is a hysteretic type energy dissipator recently developed for the passive control of structures subjected to earthquakes. It consists of several I-section steel segments connected in parallel. The energy is dissipated through plastic deformations of the web of the I-sections, which constitute the dissipative parts of the damper. WPDs were subjected to successive histories of dynamically-imposed cyclic deformations of increasing magnitude with the shaking table of the University of Granada. To assess the damage to the web of the I-section steel segments after each history of loading, a new damage index called Area Index of Damage (AID) was obtained from simple vibration tests. The vibration signals were acquired by means of piezoelectric sensors attached on the I-sections, and non-parametric statistical methods were applied to calculate AID in terms of changes in frequency response functions. The damage index AID was correlated with another energy-based damage index-ID- which past research has proven to accurately characterize the level of mechanical damage. The ID is rooted in the decomposition of the load-displacement curve experienced by the damper into the so-called skeleton and Bauschinger parts. ID predicts the level of damage and the proximity to failure of the damper accurately, but it requires costly instrumentation. The experiments reported in this paper demonstrate a good correlation between AID and ID in a realistic seismic loading scenario consisting of dynamically applied arbitrary cyclic loads. Based on this correlation, it is possible to estimate ID indirectly from the AID, which calls for much simpler and less expensive instrumentation.

A non-linear analysis of lying a floating pipeline on the seabed

In this article, a model for the determination of displacements, deformations and tensions of a submarine pipeline during the construction is presented. The process is carried out from an initial floating situation to the final laying position on the seabed. The existence of currents and small waves are also considered. Firstly, this technique, usually applied to polyethylene pipelines, is described in this paper as well as some real world examples, as well as the variables that can be modified to control the behavior of the structure. A detailed description of the actions in this process is considered, specially the ones related to marine environment, as Archimedes force, current and sea waves. The behavior of the pipeline is modeled with a non linear elasto dynamic model where geometric non linearities are taken into account. A 3-D beam model, without cross section deformation effects, is developed. Special care is taken in the numerical analysis, developed within an updated lagrangian formulation framework, with the sea bed contact, the follower forces due to the external water pressures and the dynamic actions. Finally, some subroutines are implemented into ANSYS to simulate the two dimensional case, where the whole construction process is achieved. With this software, a sensibility analysis of the bending moments, axial forces and stresses obtained with different values of the control variables in order to optimize the construction steps. These control variables are, the axial load in the pipe, the inundated inner length and the distance of the control barge from the coast.

High Resolution Detection of Mechanical Forces Exerted by Locomoting Fibroblasts on the Substrate

We have developed a new approach to detect mechanical forces exerted by locomoting fibroblasts on the substrate. Cells were cultured on elastic, collagen-coated polyacrylamide sheets embedded with 0.2-μm fluorescent beads. Forces exerted by the cell cause deformation of the substrate and displacement of the beads. By recording the position of beads during cell locomotion and after cell removal, we discovered that most forces were radially distributed, switching direction in the anterior region. Deformations near the leading edge were strong, transient, and variable in magnitude, consistent with active local contractions, whereas those in the posterior region were weaker, more stable, and more uniform, consistent with passive resistance. Treatment of cells with cytochalasin D or myosin II inhibitors caused relaxation of the forces, suggesting that they are generated primarily via actin–myosin II interactions; treatment with nocodazole caused no immediate effect on forces. Immunofluorescence indicated that the frontal region of strong deformation contained many vinculin plaques but no apparent concentration of actin or myosin II filaments. Strong mechanical forces in the anterior region, generated by locally activated myosin II and transmitted through vinculin-rich structures, likely play a major role in cell locomotion and in mechanical signaling with the surrounding environment.

Keratocytes Generate Traction Forces in Two PhasesV⃞

Forces generated by goldfish keratocytes and Swiss 3T3 fibroblasts have been measured with nanonewton precision and submicrometer spatial resolution. Differential interference contrast microscopy was used to visualize deformations produced by traction forces in elastic substrata, and interference reflection microscopy revealed sites of cell-substratum adhesions. Force ranged from a few nanonewtons at submicrometer spots under the lamellipodium to several hundred nanonewtons under the cell body. As cells moved forward, centripetal forces were applied by lamellipodia at sites that remained stationary on the substratum. Force increased and abruptly became lateral at the boundary of the lamellipodium and the cell body. When the cell retracted at its posterior margin, cell-substratum contact area decreased more rapidly than force, so that stress (force divided by area) increased as the cell pulled away. An increase in lateral force was associated with widening of the cell body. These mechanical data suggest an integrated, two-phase mechanism of cell motility: (1) low forces in the lamellipodium are applied in the direction of cortical flow and cause the cell body to be pulled forward; and (2) a component of force at the flanks pulls the rear margins forward toward the advancing cell body, whereas a large lateral component contributes to detachment of adhesions without greatly perturbing forward movement.

A model for individual and collective cell movement in Dictyostelium discoideum

The cellular slime mold Dictyostelium discoideum is a widely used model system for studying a variety of basic processes in development, including cell–cell signaling, signal transduction, pattern formation, cell motility, and the movement of tissue-like aggregates of cells. Many aspects of cell motion are poorly understood, including how individual cell behavior produces the collective motion of cells observed within the mound and slug. Herein, we describe a biologically realistic model for motile D. discoideum cells that can generate active forces, that interact via surface molecules, and that can detect and respond to chemotactic signals. We model the cells as deformable viscoelastic ellipsoids and incorporate signal transduction and cell–cell signaling by using a previously developed model. The shape constraint restricts the admissible deformations but makes the simulation of a large number of interacting cells feasible. Because the model is based on known processes, the parameters can be estimated or measured experimentally. We show that this model can reproduce the observations on the chemotactic behavior of single cells, streaming during aggregation, and the collective motion of an aggregate of cells driven by a small group of pacemakers. The model predicts that the motion of two-dimensional slugs [Bonner, J. T. (1998) Proc. Natl. Acad. Sci. USA 95, 9355–9359] results from the same behaviors that are exhibited by individual cells; it is not necessary to invoke different mechanisms or behaviors. Our computational experiments also suggest previously uncharacterized phenomena that may be experimentally observable.

A quantitative model for membrane fusion based on low-energy intermediates

The energetics of a fusion pathway is considered, starting from the contact site where two apposed membranes each locally protrude (as “nipples”) toward each other. The equilibrium distance between the tips of the two nipples is determined by a balance of physical forces: repulsion caused by hydration and attraction generated by fusion proteins. The energy to create the initial stalk, caused by bending of cis monolayer leaflets, is much less when the stalk forms between nipples rather than parallel flat membranes. The stalk cannot, however, expand by bending deformations alone, because this would necessitate the creation of a hydrophobic void of prohibitively high energy. But small movements of the lipids out of the plane of their monolayers allow transformation of the stalk into a modified stalk. This intermediate, not previously considered, is a low-energy structure that can reconfigure into a fusion pore via an additional intermediate, the prepore. The lipids of this latter structure are oriented as in a fusion pore, but the bilayer is locally compressed. All membrane rearrangements occur in a discrete local region without creation of an extended hemifusion diaphragm. Importantly, all steps of the proposed pathway are energetically feasible.

Geometric incompatibility in a fault system.

Interdependence between geometry of a fault system, its kinematics, and seismicity is investigated. Quantitative measure is introduced for inconsistency between a fixed configuration of faults and the slip rates on each fault. This measure, named geometric incompatibility (G), depicts summarily the instability near the fault junctions: their divergence or convergence ("unlocking" or "locking up") and accumulation of stress and deformations. Accordingly, the changes in G are connected with dynamics of seismicity. Apart from geometric incompatibility, we consider deviation K from well-known Saint Venant condition of kinematic compatibility. This deviation depicts summarily unaccounted stress and strain accumulation in the region and/or internal inconsistencies in a reconstruction of block- and fault system (its geometry and movements). The estimates of G and K provide a useful tool for bringing together the data on different types of movement in a fault system. An analog of Stokes formula is found that allows determination of the total values of G and K in a region from the data on its boundary. The phenomenon of geometric incompatibility implies that nucleation of strong earthquakes is to large extent controlled by processes near fault junctions. The junctions that have been locked up may act as transient asperities, and unlocked junctions may act as transient weakest links. Tentative estimates of K and G are made for each end of the Big Bend of the San Andreas fault system in Southern California. Recent strong earthquakes Landers (1992, M = 7.3) and Northridge (1994, M = 6.7) both reduced K but had opposite impact on G: Landers unlocked the area, whereas Northridge locked it up again.

Mixed synapses discovered and mapped throughout mammalian spinal cord.

Previously, synaptic activity in the spinal cord of adult mammals was attributed exclusively to chemical neurotransmission. In this study, evidence was obtained for the existence, relative abundance, and widespread distribution of "mixed" (chemical and electrical) synapses on neurons throughout the spinal cords of adult mammals. Using combined confocal microscopy and "grid-mapped freeze fracture," 36 mixed synapses containing 88 "micro" gap junctions (median = 45 connexons) were found and mapped to 33 interneurons and motor neurons in Rexed laminae III-IX in cervical, thoracic, and lumbosacral spinal cords of adult male and female rats. Gap junctions were adjacent to presumptive active zones, where even small gap junctions would be expected to increase synaptic efficacy. Two morphological types of mixed synapse were discerned. One type contained distinctive active zones consisting of "nested" concentric toroidal deformations of pre- and postsynaptic membranes, which, because of their unusual topology, were designated as "synaptic sombreros." A second type had gap junctions adjacent to active zones consisting of broad, flat, shallow indentations of the plasma membrane. Morphometric analysis indicates that mixed synapses correspond to 3-5% of all synapses on the somata and proximal dendrites, but, because of their subcellular location and morphology, they could represent 30-100% of excitatory synapses. The relative abundance of mixed synapses on several classes of neurons in spinal cords of adult rats suggests that mixed synapses provide important but previously unrecognized pathways for bidirectional communication between neurons in the mammalian central nervous system.

Hyperplane arrangements, interval orders, and trees.

A hyperplane arrangement is a finite set of hyperplanes in a real affine space. An especially important arrangement is the braid arrangement, which is the set of all hyperplanes xi - xj = 1, 1 deformations of the braid arrangement are surveyed. In particular, there are unexpected connections with the theory of interval orders and with the enumeration of trees. For instance, the number of labeled interval orders that can be obtained from n intervals I1,..., In of generic lengths is counted. There is also discussed an arrangement due to N. Linial whose number of regions is the number of alternating (or intransitive) trees, as defined by Gelfand, Graev, and Postnikov [Gelfand, I. M., Graev, M. I., and Postnikov, A. (1995), preprint]. Finally, a refinement is given, related to counting labeled trees by number of inversions, of a result of Shi [Shi, J.-Y. (1986), Lecture Notes in Mathematics, no. 1179, Springer-Verlag] that a certain deformation of the braid arrangement has (n + 1)n-1 regions.

Ligações em estruturas de madeira compostas por chapas de madeira compensada

As estruturas de madeira composta com alma em compensado já vem sendo amplamente utilizadas em diversos países onde as estruturas de madeira estão tecnologicamente mais desenvolvidas, oferecendo aos engenheiros civis mais uma opção de sistema construtivo eficiente, seguro e duradouro. Nesse trabalho são apresentados estudos teóricos e experimentais referentes às estruturas de madeira compostas utilizando compensado nas almas, e em especial as estruturas cuja ligação alma mesa é feita por pinos metálicos. O objetivo desse trabalho é desenvolver critérios de dimensionamento dessas estruturas para serem aplicados no Brasil. Vários critérios de dimensionamento de elementos compostos foram encontrados na bibliografia, alguns com simplificações que desconsideram efeitos de composição parcial e outros mais completos, que consideram deformações por cisalhamento, composição parcial etc. Com os resultados dos ensaios de vigas compostas pregadas foi possível comparar valores experimentais com resultados teóricos, concluiu-se que os critérios de dimensionamento do EUROCODE 5 são adequados. Os ensaios de rigidez de nó de pórtico de seção composta permitiram o desenvolvimento de metodologia para o cálculo da rigidez dessas ligações, visto que não existe formulação equivalente na bibliografia internacional. Concluiu-se que as ligações por pinos metálicos apresentam boa eficiência para serem utilizadas nas seções compostas com alma em compensado. As ligações de nó de pórtico com ligação alma/mesa pregadas podem ser consideradas rígidas na maioria dos casos estudados.

Tumores indutores de osteomalácia: diagnóstico, caracterização tumoral e avaliação evolutiva em longo prazo de nove pacientes

INTRODUÇÃO: Tumores indutores de osteomalácia (TIOs) são raros, geralmente apresentam origem mesenquimal, têm produção excessiva de fosfatoninas sendo a mais comum o FGF23 (Fibroblast Growth Factor 23) que, em níveis elevados, provoca osteomalácia hipofosfatêmica. A cura dos TIOs envolve a remoção completa do tumor, o que torna essencial sua localização. OBJETIVOS: (1) caracterizar nove pacientes com TIO ao diagnóstico e avaliá-los evolutivamente em longo prazo; (2) avaliar a eficácia da cintilografia com Octreotida (Octreoscan®) e a da cintilografia de corpo inteiro com Mibi (MIBI) na detecção dos TIOs. MÉTODOS: O acompanhamento dos pacientes consistiu na avaliação clínica, na avaliação laboratorial com ênfase no metabolismo ósseo e na realização de exames de imagem para caracterização das deformidades esqueléticas. Para a localização dos TIOs, os pacientes foram submetidos a exames de Octreoscan®, MIBI, ressonância magnética (RM) e tomografia computadorizada (TC). RESULTADOS: O período de observação dos pacientes variou de dois a 25 anos. Ao diagnóstico, todos exibiam fraqueza muscular, dores ósseas e fraturas de fragilidade. Em relação à avaliação laboratorial, apresentavam: hipofosfatemia com taxa de reabsorção tubular de fosfato reduzida, fosfatase alcalina aumentada e níveis elevados de FGF23. O Octreoscan® permitiu a identificação dos TIOs nos nove pacientes e o MIBI possibilitou a localização dos TIOs em seis pacientes, sendo que ambos os exames foram concordantes entre si e com os exames topográficos (RM ou TC). Os achados histopatológicos das lesões dos nove pacientes confirmaram tratar-se de oito tumores mesenquimais fosfatúricos (PMTs) benignos e um PMT maligno. Após a primeira intervenção cirúrgica para a remoção dos TIOs, quatro pacientes encontram-se em remissão da doença e cinco evoluíram com persistência tumoral. Dos cinco, quatro foram reoperados e um aguarda nova cirurgia. Dos que foram reoperados, um paciente se mantém em remissão da doença, um foi a óbito por complicações clínicas, uma teve doença metastática e o último apresentou recidiva tumoral três anos após a segunda cirurgia. Deformidades ósseas graves foram observadas nos pacientes cujo diagnóstico e/ou tratamento clínico foram tardios. O tratamento da osteomalácia foi iniciado com fosfato e perdurou até a ressecção tumoral, tendo sido reintroduzido nos casos de persistência/recidiva tumoral. Quatro pacientes que fizerem uso regular desse medicamento por mais de seis anos evoluíram com hiperparatireoidismo terciário (HPT). CONCLUSÕES: O estudo revelou que tanto o Octreoscan® como o MIBI foram capazes de localizar os TIOs. Por isso, incentivamos a realização do MIBI nos locais onde o Octreoscan® não for disponível. Uma equipe experiente é indispensável para o sucesso cirúrgico visto que os tumores, embora benignos, costumam ser infiltrativos. Recomendamos o seguimento por tempo indeterminado em função do risco de recidiva tumoral. Assim como o FGF23, consideramos o fósforo um excelente marcador de remissão, persistência e recidiva dos TIOs. O diagnóstico e o tratamento precoce são fundamentais para a melhora dos sintomas podendo minimizar as deformidades esqueléticas e as sequelas ósseas. O uso prolongado do fosfato no tratamento da osteomalácia hipofosfatêmica foi associado ao desenvolvimento do HPT

On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems.

The present thesis is focused on the development of a thorough mathematical modelling and computational solution framework aimed at the numerical simulation of journal and sliding bearing systems operating under a wide range of lubrication regimes (mixed, elastohydrodynamic and full film lubrication regimes) and working conditions (static, quasi-static and transient conditions). The fluid flow effects have been considered in terms of the Isothermal Generalized Equation of the Mechanics of the Viscous Thin Films (Reynolds equation), along with the massconserving p-Ø Elrod-Adams cavitation model that accordingly ensures the so-called JFO complementary boundary conditions for fluid film rupture. The variation of the lubricant rheological properties due to the viscous-pressure (Barus and Roelands equations), viscous-shear-thinning (Eyring and Carreau-Yasuda equations) and density-pressure (Dowson-Higginson equation) relationships have also been taken into account in the overall modelling. Generic models have been derived for the aforementioned bearing components in order to enable their applications in general multibody dynamic systems (MDS), and by including the effects of angular misalignments, superficial geometric defects (form/waviness deviations, EHL deformations, etc.) and axial motion. The bearing exibility (conformal EHL) has been incorporated by means of FEM model reduction (or condensation) techniques. The macroscopic in fluence of the mixedlubrication phenomena have been included into the modelling by the stochastic Patir and Cheng average ow model and the Greenwood-Williamson/Greenwood-Tripp formulations for rough contacts. Furthermore, a deterministic mixed-lubrication model with inter-asperity cavitation has also been proposed for full-scale simulations in the microscopic (roughness) level. According to the extensive mathematical modelling background established, three significant contributions have been accomplished. Firstly, a general numerical solution for the Reynolds lubrication equation with the mass-conserving p - Ø cavitation model has been developed based on the hybridtype Element-Based Finite Volume Method (EbFVM). This new solution scheme allows solving lubrication problems with complex geometries to be discretized by unstructured grids. The numerical method was validated in agreement with several example cases from the literature, and further used in numerical experiments to explore its exibility in coping with irregular meshes for reducing the number of nodes required in the solution of textured sliding bearings. Secondly, novel robust partitioned techniques, namely: Fixed Point Gauss-Seidel Method (PGMF), Point Gauss-Seidel Method with Aitken Acceleration (PGMA) and Interface Quasi-Newton Method with Inverse Jacobian from Least-Squares approximation (IQN-ILS), commonly adopted for solving uid-structure interaction problems have been introduced in the context of tribological simulations, particularly for the coupled calculation of dynamic conformal EHL contacts. The performance of such partitioned methods was evaluated according to simulations of dynamically loaded connecting-rod big-end bearings of both heavy-duty and high-speed engines. Finally, the proposed deterministic mixed-lubrication modelling was applied to investigate the in fluence of the cylinder liner wear after a 100h dynamometer engine test on the hydrodynamic pressure generation and friction of Twin-Land Oil Control Rings.

Seguimiento geométrico de terraplenes mediante líneas continuas de asiento en la Vega Baja del Segura, Alicante

La Vega Baja del Segura (Alicante) se caracteriza por la baja resistencia portante de los suelos y en consecuencia por las grandes deformaciones que sufren las construcciones que sobre ellos se levantan. La gran demanda turística de vías de comunicación con la costa sur de la provincia de Alicante ha obligado a construir diversas carreteras cuyos terraplenes alcanzan alturas superiores a los 8 m, así como deformaciones decimétricas y en algunos casos excepcionales de magnitud métrica. Las líneas continuas de asiento es una técnica innovadora que se lleva utilizando durante algunos años en la Vega Baja y que evita los laboriosos procedimientos de auscultación topográfica, sirviendo de instrumento de seguimiento geométrico de los mismos y permitiendo la representación gráfica del terraplén original y de su deformada. Esta técnica permite además a la Administración establecer los volúmenes de tierra necesarios para compensar el hundimiento de los terraplenes de forma exacta. Con el presente trabajo se pretende dar a conocer la metodología de las líneas continuas de asientos, así como mostrar algún ejemplo real de aplicación de las mismas, mostrando la evolución geométrica del terraplén en el tiempo y mostrando el procedimiento de cálculo de volúmenes.

Subsidencia del terreno

La subsidencia del terreno es un riesgo natural que afecta a amplias zonas del territorio causando importantes daños económicos y una gran alarma social. La subsidencia del terreno puede deberse a numerosas causas como la disolución de materiales profundos, la construcción de obras subterráneas o de galerías mineras, la erosión del terreno en profundidad, el flujo lateral del suelo, la compactación de los materiales que constituyen el terreno o la actividad tectónica. Todas estas causas se manifiestan en la superficie del terreno mediante deformaciones verticales que pueden variar desde pocos milímetros hasta varios metros durante periodos que varían desde minutos hasta años.

Técnicas de Ingeniería Cartográfica empleadas en el estudio de subsidencia y movimientos de ladera: principales características y análisis comparativo

Los movimientos de ladera y los procesos de subsidencia son fenómenos que afectan a la superficie terrestre produciendo modificaciones importantes sobre ella. Los cambios que originan se manifiestan como deformaciones superficiales cuyo estudio resulta de gran importancia en el campo de la Ingeniería Geología y la Geotecnia. En el presente trabajo se lleva a cabo una descripción de las técnicas de Ingeniería Cartográfica (técnicas topográficas, geodésicas, fotogramétricas y de teledetección) empleadas para cuantificar las deformaciones causadas por movimientos de ladera y subsidencia terrestre, estableciendo sus principales características y llevando a cabo un análisis comparativo de las mismas.