Solid polymer electrolytes based on chitosan and europium triflate

Solid polymer electrolytes (SPEs) were obtained from chitosan plasticized with glycerol and contained europium (III) trifluoromethanesulfonate salt. The transparent samples were characterized by thermal analysis (DSC and TGA), impedance spectroscopy and electron paramagnetic resonance (EPR). The sample with 55.34 wt.% of europium triflate showed the best ionic conductivity of 1.52 × 10−6 and 7.66 × 10−5 S cm−1 at 30°C and 80°C, respectively. The thermal analysis revealed that the degradation started at around 130–145°C and the weight loss ranged from 20 to 40%. The DSC of the samples showed no Tg, but only a large endothermic peak that was centered between 160 and 200 °C. The EPR analysis showed a broadening of the EPR resonance lines with increasing europium contents in the chitosan membranes due to the magnetic dipole–dipole coupling and spin–spin exchange between the Eu2+ ions. Moreover, the electrolytes based on chitosan and europium triflate presented good flexibility, homogeneity, and transparency.

Seismic behavior of concrete block masonry buildings

Tese de Doutoramento em Engenharia Civil

Dissipative contact force models

"Series: Solid mechanics and its applications, vol. 226"

The appraisal of mesophilic anaerobic digestion and thermophilic aerobic digestion in the treatment of municipal sludge in Ireland

It has been well documented that the optimum feedstock for anaerobic digesters consists of readily biodegradable compounds, as found in primary sludge or even a mixed substrate of primary and excess activated sludge. Due to the requirements of the Urban Wastewater Treatment Plant Directive of 1991, the quantities of secondary sludge generated is set to increase substantially. A pilot scale study was undertaken to evaluate the performance of both Mesophilic Anaerobic Digestion and Thermophilic Aerobic digestion in the treatment of secondary sludge. The results indicated that the anaerobic pilot scale digester achieved a greater solids destruction than the aerobic pilot plant averaging at 28% T.S. removal verses 20% for the aerobic digester, despite the fact that secondary sludge is the optimum feedstock for aerobic digestion. This can, however, be attributed to the greater biomass yield experienced with aerobic systems, and to the absence of Autothermal conditions. At present, the traditional technique of Mesophilic Anaerobic Digestion is in widespread application throughout Ireland, for the stabilisation of sewage sludge. There is only one Autothermal Thermophilic Aerobic Digester at present situated in Killarney, Co. Kerry. A further objectives of the study was to compare full-scale applications of Mesophilic Anaerobic Digestion to ATAD. Two Sludge Treatment plants, situated in Co. Kerry, were used for this purpose, and were assessed mainly under the following headings; process stability, solids reduction on average, the ATAD plant in Killarney has the advantage of producing a “Class A” Biosolid in terms of pathogen reduction, and can effectively treat double the quantity of sludge. In addition, economically the ATAD plant is cheaper to run, costing €190 / t.d.s verses €211 / t.d.s. for the anaerobic digester in Tralee. An overview of additional operational Anaerobic Digestion Plants throughout Ireland is also presented.

The appraisal of anaerobic digestion in Ireland to develop improved designs and operational practice

Mesophilic Anaerobic Digestion treating sewage sludge was investigated at five full-scale sewage treatment plants in Ireland. The anaerobic digestion plants are compared and evaluated in terms of design, equipment, operation, monitoring and management. All digesters are cylindrical, gas mixed and heated Continuously Stirred Tank Reactors (CSTR), varying in size from 130m3 to 800m3. Heat exchanger systems heat all digesters. Three plants reported difficulties with the heating systems ranging from blockages to insufficient insulation and design. Exchangers were modified and replaced within one year of operation at two plants. All but one plant had Combined Heat and Power (CHP) systems installed. Parameter monitoring is a problem at all plants mainly due to a lack of staff and knowledge. The plant operators consider pH and temperature the most important parameters to be measured in terms of successful monitoring of an anaerobic digester. The short time taken and the ease at which pH and temperature can be measured may favour these parameters. Three laboratory scale pilot anaerobic digesters were operated using a variety of feeds over at 144-day period. Two of the pilots were unmixed and the third was mechanically mixed. As expected the unmixed reactors removed more COD by retention of solids in the digesters but also produced greater quantities of biogas than the mixed digester, especially when low solids feed such as whey was used. The mixed digester broke down more solids due to the superior contact between the substrate and the biomass. All three reactors showed good performance results for whey and sewage solids. Scum formation occurred giving operational problems for mixed and unmixed reactors when cattle slurry was used as the main feed source. The pilot test was also used to investigate which parameters were the best indicators of process instability. These trials clearly indicated that total Volatile Fatty Acid (VFA) concentrations was the best parameter to show signs of early process imbalance, while methane composition in the biogas was good to indicate possible nutrient deficiencies in the feed and oxygen shocks. pH was found to be a good process parameter only if the wastewater being treated produced low bicarbonate alkalinities during treatment.

Heterogene Prozesse am Beispiel der Verbrennung fester Stoffe und der Kristallisation aus Lösungen

Heterogeneous processes, solids, combustion, crystallization, kinetics, online-monitoring, gaspotentiometric oxygen sensors, chiral separation, solid/liquid equilibria

Influência de diferentes cavalos e da época de colheita no teor de vitamina C na laranja natal

This paper deals with the variation of the ascorbic acid content in Natal orange as related to the type of rootstock and to the picking time. The determinations were carried out in the juice of fruits which had practically the same ratio total solids/acidity being selected only the highest values of such quotient. The results can be summaryzed as follows: 1. The rootstock has a significant influence on the vitamin C content of the scion; this influence shows two interesting aspects: first, the ascorbic acid contet itself varies as a function of the rootstock; among the three rootstocks studied the highest values were obtained on scion growing on Serra d'água orange; the lowest values were found in "limão rugoso" and "limão francês" was intermediate; the second point to be emphasyzed is the manner of variation of the ascorbic acid content in the different rootstocks: in the case of Serra d'água. the content decreases slowly whereas in "limão francês" the level remains nearly constant and suddenly falls down; finally in the case of "limão rugoso" the amount of ascorbic acid increases significantly to return to the primitive level. 2. The amount of ascorbic acid, not considering the rootstock influence, varies strongly as a function of harvesting time; for this reason the present factor must be borne in mind when sampling for the determination of ascorbic acid in orange is concerned.

O brix na determinação da riqueza em açúcares do mamão como auxiliar no melhoramento do mamoeiro (Carica papaya L.)

There is in the literature a noteworthy lack of sampling methods to be employed in the selection of papaya fruits for genetical improvement purposes. In the present experiment methods applied to melon and watermelon were extended to papaya with good results. The authors tried to correlate the solids content-as determined by a hand refractometer-with total sugars in the fruit. The correlation does exist being significant and positive. A regression equation was worked out; it permits to calculate the total sugar content provided the Brix value determined by the hand refractometer is known. The equation is as follows: a = 0.57 s where a = total amount of sugar as glucose, and s = total solids.

A maturação do abacaxi

In the present work it was sougth to correlate the coloration of the fruit of Ananas comosus variety Perola with the pulp quality, aiming at the orientation of the fruit grower to the correct time of harvest. Pineapple fruit was chosen in 5 stages of maturation recognized by its external characteristics, principally its color. The fruits of each stage of maturation were analysed, determining the. weight, the percentage of soluble solids, and relation of acid to soluble solids. At the same time a test was made classifying the fruits as acid, regular, good, excellent, and spoiled. A correlation was found between the external coloration of the fruit and the degree of maturation. Concluding from this that the best time to harvest the variety Perola is in the third stage in the regions closest to the market and in the second stage in the regions which are farther away. For the cannery industry the fruit should be harvest in the first stage.

Effects of 2-chloroetylphosphonic acid on ripening of mango

Mature fruits of mango 'Paheri' were treated immediately after harvest with ethefon at 0 - 250 - 500 - 1.000 and 2.000 ppm. Fruit ripening was accelerated by all treatments , the time to maturity being reduced from 48 to 72 hours, when compared with controls. Maturation was evaluated, by external colour of fruits, soluble solids and acid contents.

Diversity and structure of microcrustacean assemblages (Cladocera and Copepoda) and limnological variability in perennial and intermittent pools in a semi-arid region, Bahia, Brazil

Temporary wetlands undergo recurrent drought due to the scarcity of water, which disrupts the hydrological connectivity with adjacent aquatic systems. However, some environments retain water for longer periods, allowing greater persistence of the community. The current study evaluated differences in the microcrustacean assemblages and limnological variability between perennial and intermittent pools in a semi-arid region of Brazil. The abiotic features (water temperature, pH, total alkalinity, electrical conductivity and depth) of intermittent pools were affected more than perennial pools due to loss of water volume. This may have contributed to a higher average richness and diversity index in some intermittent pools and differences in the structure of the assemblages. The lowest species richness and diversity were recorded where physical factors, such as a large quantity of suspended solids and variability in the electrical conductivity of the water and pH, make the environment unsuitable for these organisms. These results suggest that community development in intermittent pools is interrupted by the dry season; when the water returns, due to rainfall or rising groundwater, each pond undergoes a different process of colonization. In these circumstances, the biological importance of temporary aquatic environments is clear, since such pools provide shelters and have an important role in the maintenance of the regional diversity of aquatic environments.

Occurrence of Hirudinea species in a post urban reach of a Patagonian mountain stream

Temporal (May 2005 to February 2006) and habitat distribution (pools and riffles) of Hirudinea species was analyzed at a post urban reach from Esquel stream (Chubut province, Patagonia, Argentina). Site was located 5.7 km downstream a Waste Treatment Plant. Mean values of nutrients: ammonia, nitrates and soluble reactive phosphate, as well water conductivity, turbidity and total suspended solids indicated physical and organic pollution. Leeches assemblage was composed by the glossiphonids: Helobdella scutifera Blanchard, 1900, H. michaelseni (Blanchard, 1900), H. simplex (Moore, 1911), Helobdella sp., H. hyalina Ringuelet, 1942, H. obscura Ringuelet, 1942 and the semiscolecid Patagoniobdella variabilis (Blanchard, 1900). From these H. hyalina and H. obscura are new records for Chubut province. Helobdella hyalina (810 ind.m-2) and H. simplex (465 ind. m-2) clearly dominated the assemblage at the reach. Only H. simplex displayed a spatial preference being significantly more abundant in pools than in riffle habitats (p<0.001). Species recruitment occurred mostly at September, December and March when juveniles were very abundant. Although several species of Helobdella were able to live in the disturbed section of the stream, only H. simplex and H. hyalina sustained large populations at the site and can be considered as tolerant to organic enrichment. This information is valuable to future studies on stream condition assessment in mountainous areas in Patagonia, and in other areas in which these species are present.

The tectonically controlled emplacement of a vertically sheeted gabbro-pyroxenite intrusion: Feeder-zone of an ocean-island volcano (Fuerteventura, Canary Islands)

The Miocene PX1 gabbro-pyroxenite pluton, Fuerteventura, Canary Islands, is a 3.5 x 5.5 km shallow-level intrusion (0.15-0.2 GPa and 1100-1120 degrees C), interpreted as the feeder-zone to an ocean-island volcano. It displays a vertical magmatic banding expressed in five 50 to 100 metre-wide NNE-SSW trending alkaline gabbro sequences alternating with pyroxenites. This emplacement geometry was controlled by brittle to ductile shear zones, generated by a regional E-W extensional tectonic setting that affected Fuerteventura during the Miocene. At a smaller scale, the PX1 gabbro and pyroxenite bands consist of metre-thick differentiation units, which suggest emplacement by periodic injection of magma pulses as vertical dykes that amalgamated, similarly to a sub-volcanic sheeted dyke complex. Individual dykes underwent internal differentiation following a solidification front parallel to the dyke edges. This solidification front may have been favoured by a significant lateral/horizontal thermal gradient, expressed by the vertical banding in the gabbros, the fractionation asymmetry within individual dykes and the migmatisation of the wall rocks. Pyroxenitic layers result from the fractionation and accumulation of clinopyroxene +/- olivine +/- plagioclase crystals from a mildly alkaline basaltic liquid. They are interpreted as truncated differentiation sequences, from which residual melts were extracted at various stages of their chemical evolution by subsequent dyke intrusions, either next to or within the crystallising unit. Compaction and squeezing of the crystal mush is ascribed to the incoming and inflating magma pulses. The expelled interstitial liquid was likely collected and erupted along with the magma flowing through the newly injected dykes. Clinopyroxene mineral orientation - as evidenced by EBSD and micro X-ray tomography investigations - displays a marked pure-shear component, supporting the interpretation of the role of compaction in the generation of the pyroxenites. Conversely, gabbro sequences underwent minor melt extraction and are believed to represent crystallised coalesced magma batches emplaced at lower rates at the end of eruptive cycles. Clinopyroxene orientations in gabbros record a simple shear component suggesting syn-magmatic deformation parallel to observed NNE-SSW trending shear zones induced by the regional tensional stress field. This emplacement model implies a crystallisation time of 1 to 5 years for individual dykes, consistent with PX1 emplacement over less than 0.5 My. A minimum amount of approximately 150 km(3) of magma is needed to generate the pluton, part of it having been erupted through the Central Volcanic Centre of Fuerteventura. If the regional extensional tectonic regime controls the PX1 feeder-zone initiation and overall geometry, rates and volumes of magma depend on other, source-related factors. High injection rates are likely to induce intrusion growth rates larger than could be accommodated by the regional extension. In this case, dyke intrusion by propagation of a weak tip, combined with the inability of magma to circulate through previously emplaced and crystallised dykes could result in an increase of non-lithostatic pressure on previously emplaced mushy dyke walls; thus generating strong pure-shear compaction within the pluton feeder-zone and interstitial melt expulsion. These compaction-dominated processes are recorded by the cumulitic pyroxenite bands. (C) 2010 Elsevier B.V. All rights reserved.

Analog Modelling of N-S anticlines of the External Sierras (Jaca basin, Southern Pyrenees)

Report for the scientific sojourn carried out at the Uppsala Universitet, Sweden, from April to July the 2007. Two series of analogue models are used to explore ductile-frictional contrasts of the basal décollement in the development of oblique and transverse structures simultaneously to thin-skinned shortening. These models simulate the evolution of the Central External Sierras (Southern Pyrenees, Spain), which constitute the frontal emerging part of the southernmost Pyrenean thrust sheet. They are characterized by the presence of transverse N-S to NW-SE anticlines, which are perpendicular to the Pyrenean structural trend and developed in the hangingwall of the Santo Domingo thrust system, detaching on an unevenly distributed Triassic materials (evaporitic-dolomitic interfingerings). Model setup performs a décollement made by three patches of silicone neighbouring pure brittle sand. Model series A test the thickness ratio between overburden and décollement. Model series B test the width of frictional detachment areas. Model results show how deformation reaches further in areas detached on ductile layer whereas frictional décollement areas assimilate the strain by means of an additional uplift. This replicates the structural style of Central External Sierras: higher structural relief of N-S anticlines with regard to orogen-parallel structures, absence of a representative ductile décollement in the core, tilting towards the orogen and foreland-side closure not thrusted by the frontal emerging South-Pyrenean thrust.

Identification of C7orf11 (TTDN1) gene mutations and genetic heterogeneity in nonphotosensitive trichothiodystrophy.

We have identified C7orf11, which localizes to the nucleus and is expressed in fetal hair follicles, as the first disease gene for nonphotosensitive trichothiodystrophy (TTD). C7orf11 maps to chromosome 7p14, and the disease locus has been designated "TTDN1" (TTD nonphotosensitive 1). Mutations were found in patients with Amish brittle-hair syndrome and in other nonphotosensititive TTD cases with mental retardation and decreased fertility but not in patients with Sabinas syndrome or Pollitt syndrome. Therefore, genetic heterogeneity in nonphotosensitive TTD is a feature similar to that observed in photosensitive TTD, which is caused by mutations in transcription factor II H (TFIIH) subunit genes. Comparative immunofluorescence analysis, however, suggests that C7orf11 does not influence TFIIH directly. Given the absence of cutaneous photosensitivity in the patients with C7orf11 mutations, together with the protein's nuclear localization, C7orf11 may be involved in transcription but not DNA repair.