Avaliação nutricional e conformidade da rotulagem de “petiscos” consumidos por crianças à legislação brasileira

Label is every and any information regarding to a product that is transcribed in its package. For the consumer it is through the nutritional information tables contained in the labels that there is access to data such as quantity and percentage of nutrients contained in foods. Through this knowledge, it is possible to make healthier food choices, minimizing the negative effects related to poor nutrition in the population, especially among children, the most critical rate of obesity incidence. The aim of this study was to evaluate the appropriateness of the labels of some foods consumed by children in relation to the Recommended Daily Intake (RDI) and verify that the general aspects of the labels were in accordance with Brazilian regulations. Five products were selected like snacks, corn snacks, snacks, peanut, peanuts, potato snacks and biscuit recipes. The labels of different brands of each snack were analyzed using the Checklist of Labelling, which is based on RDC No. 259 and RDC No. 360. The nutritional adequacy of nutrients from these foods (carbohydrates, protein, total fat, saturated fat, trans fat, dietary fiber and sodium) was evaluated in relation to that recommended by the RDA for children 4-8 years old. There was small percentage of mistakes in the labels of the analyzed foods, about 12%, being the presence of words that induce the consumers to the misunderstanding the irregularity with larger predominance, present in 25% of the labels. Other items in disagreement were the incomplete specification of the addictive ones alimentary in the list of ingredients and the absence of instructions about the conservation of the foods after opening the packings, both with percentile of occurrence of 18,75%. The high sodium content found in the nutritional information of food shows that should reduce the consumption of these products among children.

Estabilidade físico-química de um produto de abacate acondicionado em diferentes embalagens e conservado pelo frio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tamanho de parcelas experimentais e seleção simultânea de caracteres em progênies de Eucalyptus camaldulensis Dehnh

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cultivo de Lentinula edodes e Pleurotus ostreatus em bagaço de cana-de-açúcar

Pós-graduação em Microbiologia - IBILCE

Imunonutrição de frangos de corte alimentados com ácidos orgânicos em alternativa aos quimioterápicos

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Atividade antibacteriana de óleo essencial de orégano (Origanum vulgare): ações in vitro e in situ para preservação de alimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades estruturais e espectroscópicas de WO3 e WO3:Eu3+

Used as catalysts even in organic and inorganic molecules, as additives on catalysts, electrochromic films on smart windows the tungsten trioxide have been largely studied on the lasts decades, but there is just a few about it's luminescence. Using as precursors nitric acid and sodium tungstate the tungsten trioxide were been prepared thru wet process then treating on thermic and hydrothermal treatments. Where been evaluated the effects of methodology, nitric acid concentration, duration and temperature of treatments. The samples were characterized by X-ray diffraction (XRD), Raman scattering spectroscopy (RSS), Fourier transformed infrared spectroscopy, photoluminescence spectroscopy (PLS) and X-ray excited optical luminescence (XEOL). Hydrated phases of tungsten trioxide were obtained through hydrothermal treatments and the non-hydrated phases occur with thermic treatments. The acid concentration has the ability to determine the major phase formed as well the temperature determine the hydratation of the product. With lower temperatures dihydrate phase were preferable formed and with the rise of temperature, the water molecules were lost up to the fractionary hydratation and then the non-hydrated phase with higher temperatures depending on the atmosphere used on the thermal treatment. Doping the system with europium ions even substituting tungsten or in the interstices of the matrix were not been successful, as well the XEOL spectroscopy intensity were null and quite low for ultraviolet and visible excitation photoluminescence because of oxygen defect levels localized into the prohibited band.

Investigação dos métodos de separação, uso e aplicação da Lignina proveniente da biomassa lignocelulósica

This study investigated the main methods of separation of components of lignocellulosic biomass, with an emphasis on obtaining lignin and its application. The work was developed based on the concept of Biorefinery proposing full use of renewable raw materials and / or the use of lignocellulosic agricultural residues by biochemical or biotechnological conversion in obtaining high value added products with minimal environmental impact. From this premise, a literature review was performed in refereed journal articles and theses in order to gather enough material for critical analysis of usual and alternative methods in the literature. When researching methods that add value to lignin, it was found that with the technology found today, the cost required to have a degree of competitiveness is still too high, preventing much of the process. However, the isolated lignin can be used as raw material in the production of numerous types of biocomposites and polymers and other products such as phenols, benzene, dispersants, vanillin, emulsifying agents, antioxidants, pesticides, fertilizers, charcoal, concrete additives, among others. As an industrial production level is necessary, because the consumption of biomass will only grow over the years, it is necessary that new methods or technologies to be created in order to facilitate the extensive use of lignocellulosic biomass

Bioestimulação de célula-tronco mesenquimal de rato sob ação da luz contínua e pulsátil de 630 nm utilizando LED

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades estruturais e espectroscópicas de WO3 e WO3:Eu3+

Used as catalysts even in organic and inorganic molecules, as additives on catalysts, electrochromic films on smart windows the tungsten trioxide have been largely studied on the lasts decades, but there is just a few about it's luminescence. Using as precursors nitric acid and sodium tungstate the tungsten trioxide were been prepared thru wet process then treating on thermic and hydrothermal treatments. Where been evaluated the effects of methodology, nitric acid concentration, duration and temperature of treatments. The samples were characterized by X-ray diffraction (XRD), Raman scattering spectroscopy (RSS), Fourier transformed infrared spectroscopy, photoluminescence spectroscopy (PLS) and X-ray excited optical luminescence (XEOL). Hydrated phases of tungsten trioxide were obtained through hydrothermal treatments and the non-hydrated phases occur with thermic treatments. The acid concentration has the ability to determine the major phase formed as well the temperature determine the hydratation of the product. With lower temperatures dihydrate phase were preferable formed and with the rise of temperature, the water molecules were lost up to the fractionary hydratation and then the non-hydrated phase with higher temperatures depending on the atmosphere used on the thermal treatment. Doping the system with europium ions even substituting tungsten or in the interstices of the matrix were not been successful, as well the XEOL spectroscopy intensity were null and quite low for ultraviolet and visible excitation photoluminescence because of oxygen defect levels localized into the prohibited band.

Investigação dos métodos de separação, uso e aplicação da Lignina proveniente da biomassa lignocelulósica

This study investigated the main methods of separation of components of lignocellulosic biomass, with an emphasis on obtaining lignin and its application. The work was developed based on the concept of Biorefinery proposing full use of renewable raw materials and / or the use of lignocellulosic agricultural residues by biochemical or biotechnological conversion in obtaining high value added products with minimal environmental impact. From this premise, a literature review was performed in refereed journal articles and theses in order to gather enough material for critical analysis of usual and alternative methods in the literature. When researching methods that add value to lignin, it was found that with the technology found today, the cost required to have a degree of competitiveness is still too high, preventing much of the process. However, the isolated lignin can be used as raw material in the production of numerous types of biocomposites and polymers and other products such as phenols, benzene, dispersants, vanillin, emulsifying agents, antioxidants, pesticides, fertilizers, charcoal, concrete additives, among others. As an industrial production level is necessary, because the consumption of biomass will only grow over the years, it is necessary that new methods or technologies to be created in order to facilitate the extensive use of lignocellulosic biomass

Bioestimulação de célula-tronco mesenquimal de rato sob ação da luz contínua e pulsátil de 630 nm utilizando LED

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Viscosity of egg white from hens of different strains fed with commercial and natural additives

Yolk color and egg white (albumen) cleanliness and viscosity are important parameters by which consumers judge the quality of eggs. This study aimed to investigate changes in albumen viscosity during storage of eggs for up to 36 days from two different commercial laying hen strains (Carijo Barbada and Isa Brown) fed a diet containing annatto (1.5 and 2.0%) or a synthetic additive without synthetic colorants (control). Analyses of humidity, albumen height, pH, viscosity, foam formation, and stability were carried out on eggs. Carijo Barbada strain had smaller albumen, lower humidity and higher egg white viscosity than Isa Brown strain; however, with storage, viscosity lowered significantly on both strains. Initially, the addition of 2.0% of annatto or a synthetic additive increased viscosity in both strains, but with storage only the control maintained longer viscosity. Lower viscosity did not change foam density and stability.

Adição de carotenóides naturais e artificiais na alimentação de galinhas poedeiras: efeitos na qualidade de ovos frescos e armazenados

A pesquisa teve como objetivo avaliar os atributos de qualidade e de durabilidade dos ovos de duas diferentes linhagens de poedeiras, com dietas contendo aditivos artificiais ou naturais, em diferentes períodos de armazenamento. Foram quantificadas durante o armazenamento as variáveis perda de peso, pH da gema e albúmen, gravidade específica, índice de gema (IG) e foi realizada também classificação por peso e Unidade Haugh (UH). Os resultados foram avaliados segundo teste de Tukey (P≤0,05). As linhagens diferiram quanto à classificação extra dos ovos, com maior porcentagem para a Isa Brown. Os ovos obtidos das poedeiras Carijó apresentaram maior porcentagem de gema (Carijó 30,66 e Isa-Brown 24,55). O tempo de armazenamento fez com que a porcentagem de gema aumentasse nas duas linhagens (Carijó 30,66 tempo zero para 34,85 depois de 36 dias; e Isa- Brown de 24,55 para 27,48). As dietas com aditivos artificiais ou naturais não influenciaram a porcentagem de clara (% Clara 58,72 Controle; 59,52 Aditivo; 60,11 Urucum 1,5%; 59,43 e de gema %Gema 27,64 Controle; 27,90 Aditivo; 27,21 Urucum 1,5%; 27,66 Urucum 2%). O pH da clara diferiu entre os tratamentos no tempo inicial e aos 36 dias de armazenamento, mas o pH da gema não diferiu durante todo o armazenamento. O índice de gema diferiu nos tempos de armazenamento, mas não diferiu considerando os tratamentos. Em dietas com aditivos artificiais ou naturais, as linhagens e os tempos de armazenamento influenciam na qualidade e durabilidade dos ovos.

Estudo do efeito do tipo de polipropileno na fotodegradação da blenda polipropileno/poliestireno de alto impacto

Este trabalho visa avaliar a influência do tipo de polipropileno no comportamento da blenda polipropileno/poliestireno de alto impacto (PP/HIPS) quando exposta à radiação UV. Foram usados uma resina virgem de PP (PPv) e outra reprocessada (PPrep). Inicialmente, avaliou-se o comportamento individual dos componentes da blenda, HIPS, PPv e PPrep, quando submetidos à radiação UV por até 15 semanas de exposição. As técnicas de caracterização utilizadas para monitorar o desempenho tanto das resinas individualmente quanto das blendas submetidas à radiação UV foram: propriedades mecânicas (tração e impacto), medidas de índice de fluidez (MFI), análise térmica (DSC), espectroscopia no infravermelho (FTIR) e microscopia eletrônica de varredura (MEV). A partir dos resultados com essas técnicas verificou-se que o PPv foi a resina mais afetada pela radiação e consequentemente as blendas preparadas com esse PP também foram mais sensíveis à fotodegradação do que as demais. Em termos de fotoestabilização este resultado mostra-se interessante, já que as blendas PP/HIPS preparadas com uma resina previamente degradada necessitariam de menores teores de aditivos do que esse mesmo tipo de blenda preparada com resina virgem.