994 resultados para 179


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the first detailed study of the mechanics and modes of adiabatic shear localization in solids, and provides a systematic description of a number of aspects of adiabatic shear banding. The inclusion of the appendices which provide a quick reference section and a comprehensive collection of thermomechanical data allows rapid access and understanding of the subject and its phenomena. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. This reference book has come about in response to the pressing demand of mechanical and metallurgical engineers for a high quality summary of the knowledge gained over the last twenty years. While fulfilling this requirement, the book is also of great interest to academics and researchers into materials performance.

Table of Contents

1Introduction1
1.1What is an Adiabatic Shear Band?1
1.2The Importance of Adiabatic Shear Bands6
1.3Where Adiabatic Shear Bands Occur10
1.4Historical Aspects of Shear Bands11
1.5Adiabatic Shear Bands and Fracture Maps14
1.6Scope of the Book20
2Characteristic Aspects of Adiabatic Shear Bands24
2.1General Features24
2.2Deformed Bands27
2.3Transformed Bands28
2.4Variables Relevant to Adiabatic Shear Banding35
2.5Adiabatic Shear Bands in Non-Metals44
3Fracture and Damage Related to Adiabatic Shear Bands54
3.1Adiabatic Shear Band Induced Fracture54
3.2Microscopic Damage in Adiabatic Shear Bands57
3.3Metallurgical Implications69
3.4Effects of Stress State73
4Testing Methods76
4.1General Requirements and Remarks76
4.2Dynamic Torsion Tests80
4.3Dynamic Compression Tests91
4.4Contained Cylinder Tests95
4.5Transient Measurements98
5Constitutive Equations104
5.1Effect of Strain Rate on Stress-Strain Behaviour104
5.2Strain-Rate History Effects110
5.3Effect of Temperature on Stress-Strain Behaviour114
5.4Constitutive Equations for Non-Metals124
6Occurrence of Adiabatic Shear Bands125
6.1Empirical Criteria125
6.2One-Dimensional Equations and Linear Instability Analysis134
6.3Localization Analysis140
6.4Experimental Verification146
7Formation and Evolution of Shear Bands155
7.1Post-Instability Phenomena156
7.2Scaling and Approximations162
7.3Wave Trapping and Viscous Dissipation167
7.4The Intermediate Stage and the Formation of Adiabatic Shear Bands171
7.5Late Stage Behaviour and Post-Mortem Morphology179
7.6Adiabatic Shear Bands in Multi-Dimensional Stress States187
8Numerical Studies of Adiabatic Shear Bands194
8.1Objects, Problems and Techniques Involved in Numerical Simulations194
8.2One-Dimensional Simulation of Adiabatic Shear Banding199
8.3Simulation with Adaptive Finite Element Methods213
8.4Adiabatic Shear Bands in the Plane Strain Stress State218
9Selected Topics in Impact Dynamics229
9.1Planar Impact230
9.2Fragmentation237
9.3Penetration244
9.4Erosion255
9.5Ignition of Explosives261
9.6Explosive Welding268
10Selected Topics in Metalworking273
10.1Classification of Processes273
10.2Upsetting276
10.3Metalcutting286
10.4Blanking293
 Appendices297
AQuick Reference298
BSpecific Heat and Thermal Conductivity301
CThermal Softening and Related Temperature Dependence312
DMaterials Showing Adiabatic Shear Bands335
ESpecification of Selected Materials Showing Adiabatic Shear Bands341
FConversion Factors357
 References358
 Author Index369
 Subject Index375

Relevância:

10.00% 10.00%

Publicador:

Resumo:

ENGLISH: Comparison of physical and biological environmental factors affecting the aggregation of tunas with the success of fishing by the commercial fleets, requires that catch and effort data be examined in greater detail than has been presented in these publications. Consequently, the United States Bureau of Commercial Fisheries Biological Laboratory, San Diego, to serve the needs of its program of research on causes of variations in tuna abundance, made arrangements with the Tuna Commission to summarize these catch and effort data by month, by one-degree area, by fishing vessel size-class, for the years 1951-1960 for bait boats and 1953-1960 for purse-seiners. The present paper describes the techniques employed in summarizing these data by automatic data processing methods. It also presents the catch and effort information by months, by five-degree areas and certain combinations of five-degree areas for use by fishermen, industry personnel, and research agencies. Because of space limitations and other considerations, the one-degree tabulations are not included but are available at the Tuna Commission and Bureau laboratories. SPANISH: La comparación de los factores ambientales físicos y biológicos que afectan la agrupación del atún, con el éxito obtenido en la pesca por las flotas comerciales, requiere que los datos sobre la captura y el esfuerzo sean examinados con mayor detalle de lo que han sido presentados en estas publicaciones. En consecuencia, el Laboratorio Biológico del Buró de Pesquerías Comerciales de los Estados Unidos, situado en San Diego, a fin de llenar los requisitos de su programa de investigación sobre las causas de las variaciones en la abundancia del atún, hizo arreglos con la Comisión del Atún para sumarizar esos datos sobre la captura y el esfuerzo por meses, por áreas de un grado, por clases de tamaño de las embarcaciones de pesca durante los años 1951-1960 en lo que concierne a los barcos de carnada y durante el período 1953-1960 en lo que respecta a los barcos rederos. El presente trabajo describe la técnica empleada en la sumarización de dichos datos mediante métodos automáticos de manejo de datos. También se da aquí la información sobre la captura y el esfuerzo por meses, por áreas de cinco grados y ciertas combinaciones de áreas de cinco grados para el uso de los pescadores, del personal de la industria y de las oficinas de investigación. Por falta de espacio y otras razones, las tabulaciones de las áreas de un grado no han sido incluídos en este trabajo, pero están a la disposición de quien tenga interés en los laboratorios de la Comisión del Atún y del Buró.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Referência: Diccionario Bibliographico Brazileiro / Augusto Victorino Alves Sacramento Blake, 1899. v. 4, p. 179.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

From 1979 to 2000, the site for the dumping of low-level radioactive wastes and an unaffected site in the North-east Atlantic were investigated to determine the biomass data of the benthopelagic nekton and the benthic organisms. The investigation shall demonstrate the influence on the biocoenosis of the so-called "artificial reef effect", caused by dumped waste drums. For sampling benthopelagic and benthic organisms, we used a modified Agassiz trawl, called the Deep-sea Closing Net. With the exception of the “Amperima event” in 1996 – a unique occurrence of a large number of sea-cucumbers – there was no change in the composition of benthopelagic and benthic organisms through the years. The biomass of the benthopelagic nekton was characterized by Macrouridae(rat-tailed fishes) and the main tax on of the benthos was Actiniaria (sea-anemones).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Details are given of a programme for fresh fish collection and distribution in Ondo State, Nigeria. Collection centers, organization and managerial structure, collection scheme, trade system, price determination, management and distribution are described

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The poor situation of fish stocks worldwide pointed out by FAO has led to a reconsideration of fishing concepts internationally. A brief outline of the world fishing situation is given, as well as that of the EU and Germany. Explanations of basic fishing parameters like catch, recruitment and fishing mortality are given and used to expound and graphically show the relation to overfishing and the new concept of the ”precautionary priciple” and ”precautionary approach” for the goal of a sustainable fishery. This leads to recommendations for research and actions in respect to selectivity, adjustment of fishing capacity and new concepts of utilisation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Apresenta as atividades do ano de 2015 na Comissão de Educação da Câmara dos Deputados.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Effects of wall temperature on stabilities of hypersonic boundary layer over a 7-degree half-cone-angle blunt cone are studied by using both direct numerical simulation (DNS) and linear stability theory (LST) analysis. Four isothermal wall cases with Tw/T0= 0.5, 0.7, 0.8 and 0.9, as well as an adiabatic wall case are considered. Results of both DNS and LST indicate that wall temperature has significant effects on the growth of disturbance waves. Cooling the surface accelerates unstable Mack II mode waves and decelerates the first mode (Tollmien–Schlichting mode) waves. LST results show that growth rate of the most unstable Mack II mode waves for the cases of cold wall Tw/T0=0.5 and 0.7 are about 45% and 25% larger than that for the adiabatic wall, respectively. Numerical results show that surface cooling modifies the profiles of rdut/dyn and temperature in the boundary layers, and thus changes the stability haracteristic of the boundary layers, and then effects on the growth of unstable waves. The results of DNS indicate that the disturbances with the frequency range from about 119.4 to 179.1 kHz, including the most unstable Mack modes, produce strong mode competition in the downstream region from about 11 to 100 nose radii. And adiabatic wall enhances the amplitudes of disturbance according to the results of DNS, although the LST indicates that the growth rate of the disturbance of cold wall is larger. That because the growth of the disturbance does not only depend on the development of the second unstable mode.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The meristic and morphometric characteristics of Gymnarchus niloticus are described and linear equations relating various parts of the body to the head length or total length are given. The age of G. niloticus in Lake Chad (Nigeria) was determined from growth marks on the opercular bones. The mean lengths for age, and mean weights for age obtained for the first five years of life are given. The assymptotic length and the von Betarlanffy growth parameters for the males and females combined are given

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The preliminary results obtained from the study of stomach contents of specimens of Gymnarchus niloticus of a size ranging from 56 cm (66 grams) to 152 cm (12.0 kg.) from August to December, 1982 indicate for these sizes an exclusively piscivorous diet. The predominant prey species in Lake Chad are Tilapia/Sarotherodon , and Clarias . The prey is often cut in two parts before it is swallowed. Small prey may be swallowed whole. The implication of this prey capture method on prey-predator relationship and therefore the impact of the predator is discussed. The breeding season of Gymnarchus niloticus in Lake Chad has been deduced from observation of changes in gonad maturity stages and the results indicate that breeding takes place between August and November. Data are also presented on the fecundity, size of ripe eggs and probable size at maturity

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Capítulo 7 del libro: Guisasola, Jenaro ; Garmendia, Mikel (eds.) "Aprendizaje basado en problemas, proyectos y casos: diseño e implementación de experiencias en la universidad" (ISBN: 978-84-9860-959-2)