Effect of immersion and inoculation in ovo of Lactobacillus spp. in embryonated chicken eggs in the prevention of Salmonella enteritidis after hatch

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the implant diameter with different sizes of hexagon: Analysis by 3-dimensional finite element method

The aim of this study was to evaluate the stress distribution in implants of regular platforms and of wide diameter with different sizes of hexagon by the 3-dimensional finite element method. We used simulated 3-dimensional models with the aid of Solidworks 2006 and Rhinoceros 4.0 software for the design of the implant and abutment and the InVesalius software for the design of the bone. Each model represented a block of bone from the mandibular molar region with an implant 10 mm in length and different diameters. Model A was an implant 3.75 mm/regular hexagon, model B was an implant 5.00 mm/regular hexagon, and model C was an implant 5.00 mm/ expanded hexagon. A load of 200 N was applied in the axial, lateral, and oblique directions. At implant, applying the load (axial, lateral, and oblique), the 3 models presented stress concentration at the threads in the cervical and middle regions, and the stress was higher for model A. At the abutment, models A and B showed a similar stress distribution, concentrated at the cervical and middle third; model C showed the highest stresses. On the cortical bone, the stress was concentrated at the cervical region for the 3 models and was higher for model A. In the trabecular bone, the stresses were less intense and concentrated around the implant body, and were more intense for model A. Among the models of wide diameter (models B and C), model B (implant 5.00 mm/regular hexagon) was more favorable with regard to distribution of stresses. Model A (implant 3.75 mm/regular hexagon) showed the largest areas and the most intense stress, and model B (implant 5.00 mm/regular hexagon) showed a more favorable stress distribution. The highest stresses were observed in the application of lateral load.

Histologic and biomechanical evaluation of 2 resorbable-blasting media implant surfaces at early implantation times

This study evaluated 3 implant surfaces in a dog model: (1) resorbable-blasting media + acid-etched (RBMa), alumina-blasting + acid-etching (AB/AE), and AB/AE + RBMa (hybrid). All of the surfaces were minimally rough, and Ca and P were present for the RBMa and hybrid surfaces. Following 2 weeks in vivo, no significant differences were observed for torque, bone-to-implant contact, and bone-area fraction occupied measurements. Newly formed woven bone was observed in proximity with all surfaces.

Istmo Centroamericano: estadísticas del sector manufacturero y de la industria de exportación (datos actualizados a 2007)

Incluye Bibliografía

Apuntes sobre el desarrollo económico de Guatemala

Incluye Bibliografía

A amizade em Montaigne

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Latin America and the Caribbean: inventory of water resources and their use, vol. 1: Mexico, Central America and the Caribbean

Incluye Bibliografía

América Latina y el Caribe: inventario de los recursos hídricos y su utilización, vol. 1: México, Centroamérica y el Caribe

Incluye Bibliografía

América Latina y el Caribe: inventario de los recursos hídricos y su utilización, vol. 2: América del Sur = Latin America and the Caribbean: inventory of water resources and their use, vol.2: South America

Incluye Bibliografía

Sacrificium Laudis: a hermenêutica da continuidade de Bento XVI e o retorno do catolicismo tradicional (1969-2009)

Nesta obra pretende-se estudar as duas formas rituais da liturgia romana, comparando-as e procurando entender os motivos do cisma, ao mesmo tempo em que se pretende abarcar as ações do atual pontífice e as reações no mundo católico e fora dele. Para tanto, usar-se-á como fonte o Missal tridentino de 1570 e o novo Ordo Missæ de Paulo VI de 1969, bem como os catecismos formulados após os Concílios de Trento (1545-1563) e o Vaticano II (1962-1965), tendo por objetivo comparar suas notificações sobre o culto católico e seu significado. Durante o processo de análise tem-se a intenção de vislumbrar o impacto das mudanças no seio da Igreja, pois constata-se uma espécie de endurecimento no final do pontificado de João Paulo II, com a promulgação de documentos litúrgicos que tendem a criar empecilhos para possíveis abusos durante a missa (Ecclesia de Eucharistia, 2003) - há a retomada e destaque do sentido sacrificial do culto católico e uma série de recomendações impostas pela Congregação do Culto Divino para celebração da missa (Redemptionis Sacramentum, 2004). Fato é que, quarenta anos após o mencionado Concílio Vaticano II e quase quatro décadas de utilização do novo rito da missa, é rara qualquer menção específica na historiografia recente da Igreja sobre o andamento de tal tema. A maioria dos livros de história da Igreja que traça um levantamento de fatos até o Vaticano II, apresentam-no como uma espécie de revolução interna da estrutura eclesiástica sem, contudo, aprofundar o tema ou mostrar as crises na Igreja decorrentes deste.

Induction of immune response in broiler chickens immunized with recombinant FliC and challenged by Salmonella Typhimurium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Platform and Abutment Angulation on Peri-Implant Bone. A Three-Dimensional Finite Element Stress Analysis

The aim of this study was to evaluate stress distribution on the pen-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm x 5 mm) were created varying the platform (R, regular or S. switching) and the abutments (S, straight or A, angulated 15 degrees). The models were created by using Mimics 13 and Solid Works 2010 software programs. The numerical analysis was performed using ANSYS Workbench 10.0. Oblique forces (100 N) were applied to the palatine surface of the central incisor. The bone/implant interface was considered perfectly integrated. Maximum (sigma(max)) and minimum (sigma(min)) principal stress values were obtained. For the cortical bone the highest stress values (sigma(max)) were observed in the RA (regular platform and angulated abutment, 51 MPa), followed by SA (platform switching and angulated abutment, 44.8 MPa), RS (regular platform and straight abutment, 38.6 MPa) and SS (platform switching and straight abutment, 36.5 MPa). For the trabecular bone, the highest stress values (sigma(max)) were observed in the RA (6.55 MPa), followed by RS (5.88 MPa), SA (5.60 MPa), and SS (4.82 MPa). The regular platform generated higher stress in the cervical periimplant region on the cortical and trabecular bone than the platform switching, irrespective of the abutment used (straight or angulated).

Assessment of the Correlation Between Insertion Torque and Resonance Frequency Analysis of Implants Placed in Bone Tissue of Different Densities

The primary stability of dental implants is fundamental for osseointegration. Therefore, this study aimed to assess the correlation between insertion torque (IT) and resonance frequency analysis (RFA) of implants placed in mandibles and maxillas of different bone densities. Eighty dental implants were placed in maxillas and mandibles, and IT and the implant stability quotient (ISQ) were measured at the time of implant insertion. Bone density was assessed subjectively by the Lekholm and Zarb index. The type I and II densities were grouped together (group A)as were the type III and IV densities (group B). The IT in group A was higher (Student t test, P = .0013) than in group B (46.27 +/- 18.51 Ncm, 33.62 +/- 14.74 Ncm, respectively). The implants placed in group A showed higher ISQ (Student t test, P = .0004) than those placed in group B (70.09 +/- 7.50, 63.66 +/- 8.00, respectively). A significant correlation between IT and the ISQ value was observed for group A (Pearson correlation test; r = 0.35; P = .0213) and for group B (r = 0.37; P = .0224). Within the limitations of this study, it was possible to conclude that there is a correlation between IT and RFA of implants placed in mandibles and maxillas of different bone densities.

Candidatus Liberibacter asiaticus Titers in Citrus and Acquisition Rates by Diaphorina citri Are Decreased by Higher Temperature

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)